From: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
To: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
linux-can@vger.kernel.org,
Wolfgang Grandegger <wg@grandegger.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
"David S . Miller" <davem@davemloft.net>,
Oliver Neukum <oneukum@suse.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org
Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr>,
Jakub Kicinski <kuba@kernel.org>,
Masahiro Yamada <masahiroy@kernel.org>,
Arunachalam Santhanam <arunachalam.santhanam@in.bosch.com>
Subject: [PATCH v2 6/6] usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
Date: Wed, 30 Sep 2020 23:45:33 +0900 [thread overview]
Message-ID: <20200930144602.10290-7-mailhol.vincent@wanadoo.fr> (raw)
In-Reply-To: <20200926175810.278529-1-mailhol.vincent@wanadoo.fr>
The ES58X devices has a CDC ACM interface (used for debug
purpose). During probing, the device is thus recognized as USB Modem
(CDC ACM), preventing the etas-es58x module to load:
usbcore: registered new interface driver etas_es58x
usb 1-1.1: new full-speed USB device number 14 using xhci_hcd
usb 1-1.1: New USB device found, idVendor=108c, idProduct=0159, bcdDevice= 1.00
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: ES581.4
usb 1-1.1: Manufacturer: ETAS GmbH
usb 1-1.1: SerialNumber: 2204355
cdc_acm 1-1.1:1.0: No union descriptor, testing for castrated device
cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device
Thus, these have been added to the ignore list in
drivers/usb/class/cdc-acm.c
N.B. Future firmware release of the ES58X will remove the CDC-ACM
interface.
`lsusb -v` of the three devices variant (ES581.4, ES582.1 and
ES584.1):
Bus 001 Device 011: ID 108c:0159 Robert Bosch GmbH ES581.4
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x108c Robert Bosch GmbH
idProduct 0x0159
bcdDevice 1.00
iManufacturer 1 ETAS GmbH
iProduct 2 ES581.4
iSerial 3 2204355
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0035
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 5 Bus Powered Configuration
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 0
iInterface 4 ACM Control Interface
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities 0x01
call management
bDataInterface 0
CDC ACM:
bmCapabilities 0x06
sends break
line coding and serial state
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 012: ID 108c:0168 Robert Bosch GmbH ES582
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x108c Robert Bosch GmbH
idProduct 0x0168
bcdDevice 1.00
iManufacturer 1 ETAS GmbH
iProduct 2 ES582
iSerial 3 0108933
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0043
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 16
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 013: ID 108c:0169 Robert Bosch GmbH ES584.1
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x108c Robert Bosch GmbH
idProduct 0x0169
bcdDevice 1.00
iManufacturer 1 ETAS GmbH
iProduct 2 ES584.1
iSerial 3 0100320
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0043
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 16
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
---
drivers/usb/class/cdc-acm.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 7f6f3ab5b8a6..ed9355094e8c 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1906,6 +1906,17 @@ static const struct usb_device_id acm_ids[] = {
.driver_info = IGNORE_DEVICE,
},
+ /* Exclude ETAS ES58x */
+ { USB_DEVICE(0x108c, 0x0159), /* ES581.4 */
+ .driver_info = IGNORE_DEVICE,
+ },
+ { USB_DEVICE(0x108c, 0x0168), /* ES582.1 */
+ .driver_info = IGNORE_DEVICE,
+ },
+ { USB_DEVICE(0x108c, 0x0169), /* ES584.1 */
+ .driver_info = IGNORE_DEVICE,
+ },
+
{ USB_DEVICE(0x1bc7, 0x0021), /* Telit 3G ACM only composition */
.driver_info = SEND_ZERO_PACKET,
},
--
2.26.2
next prev parent reply other threads:[~2020-09-30 15:00 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-26 17:57 [PATCH 0/6] can: add support for ETAS ES58X CAN USB Vincent Mailhol
2020-09-26 17:57 ` [PATCH 1/6] can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard IRQ context Vincent Mailhol
2020-09-26 17:57 ` [PATCH 2/6] can: dev: add a helper function to get the correct length of Classical frames Vincent Mailhol
2020-09-26 17:57 ` [PATCH 3/6] can: dev: __can_get_echo_skb(): fix the return length Vincent Mailhol
2020-09-26 17:57 ` [PATCH 4/6] can: dev: add a helper function to calculate the duration of one bit Vincent Mailhol
2020-09-26 17:57 ` [PATCH 6/6] USB: cdc-acm: blacklist ETAS ES58X device Vincent Mailhol
2020-09-27 5:45 ` Greg Kroah-Hartman
2020-09-27 5:52 ` Greg Kroah-Hartman
2020-09-29 2:15 ` Vincent Mailhol
2020-09-30 14:45 ` [PATCH v2 0/6] can: add support for ETAS ES58X CAN USB Vincent Mailhol
2020-09-30 14:45 ` [PATCH v2 1/6] can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard IRQ context Vincent Mailhol
2020-09-30 14:45 ` [PATCH v2 2/6] can: dev: add a helper function to get the correct length of Classical frames Vincent Mailhol
2020-09-30 15:21 ` Marc Kleine-Budde
2020-10-01 15:45 ` [PATCH v2 2/6] can: dev: add a helper function Vincent Mailhol
2020-10-01 15:51 ` Marc Kleine-Budde
2020-09-30 14:45 ` [PATCH v2 3/6] can: dev: __can_get_echo_skb(): fix the return length Vincent Mailhol
2020-09-30 14:45 ` [PATCH v2 4/6] can: dev: add a helper function to calculate the duration of one bit Vincent Mailhol
2020-09-30 14:45 ` Vincent Mailhol [this message]
[not found] ` <20200930144602.10290-6-mailhol.vincent@wanadoo.fr>
2020-09-30 16:18 ` [PATCH v2 5/6] can: usb: etas_es58X: add support for ETAS ES58X CAN USB interfaces Greg Kroah-Hartman
2020-10-01 15:56 ` Vincent Mailhol
2020-10-02 15:41 ` [PATCH v3 0/7] can: add support for ETAS ES58X CAN USB Vincent Mailhol
2020-10-02 15:41 ` [PATCH v3 1/7] can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard IRQ context Vincent Mailhol
2020-10-02 15:41 ` [PATCH v3 2/7] can: dev: fix type of get_can_dlc() and get_canfd_dlc() macros Vincent Mailhol
2020-10-02 15:41 ` [PATCH v3 3/7] can: dev: add a helper function to get the correct length of Classical frames Vincent Mailhol
2020-10-02 15:41 ` [PATCH v3 4/7] can: dev: __can_get_echo_skb(): fix the return length Vincent Mailhol
2020-10-02 15:41 ` [PATCH v3 5/7] can: dev: add a helper function to calculate the duration of one bit Vincent Mailhol
2020-10-04 11:06 ` Marc Kleine-Budde
2020-10-04 11:10 ` Marc Kleine-Budde
2020-10-02 15:41 ` [PATCH v3 7/7] usb: cdc-acm: add quirk to blacklist ETAS ES58X devices Vincent Mailhol
2020-10-05 11:14 ` Greg Kroah-Hartman
[not found] ` <20201002154219.4887-7-mailhol.vincent@wanadoo.fr>
2020-10-04 12:06 ` [PATCH v3 6/7] can: usb: etas_es58X: add support for ETAS ES58X CAN USB interfaces Marc Kleine-Budde
2020-10-10 8:12 ` Vincent Mailhol
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200930144602.10290-7-mailhol.vincent@wanadoo.fr \
--to=mailhol.vincent@wanadoo.fr \
--cc=arunachalam.santhanam@in.bosch.com \
--cc=davem@davemloft.net \
--cc=gregkh@linuxfoundation.org \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=masahiroy@kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=oneukum@suse.com \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).