pull-request: can-next 2021-01-27

pull-request: can-next 2021-01-27

[Marc Kleine-Budde]

Hello Jakub, hello David,

this is a pull request of 12 patches for net-next/master.

The first two patches are by me and fix typos on the CAN gw protocol and the
flexcan driver.

The next patch is by Vincent Mailhol and targets the CAN driver infrastructure,
it exports the function that converts the CAN state into a human readable
string.

A patch by me, which target the CAN driver infrastructure, too, makes the
calculation in can_fd_len2dlc() more readable.

A patch by Tom Rix fixes a checkpatch warning in the mcba_usb driver.

The next seven patches target the mcp251xfd driver. Su Yanjun's patch replaces
several hardcoded assumptions when calling regmap, by using
regmap_get_val_bytes(). The remaining patches are by me. First an open coded
check is replaced by an existing helper function, then in the TX path the
padding for CAN-FD frames is cleaned up. The next two patches clean up the RTR
frame handling in the RX and TX path. Then support for len8_dlc is added. The
last patch adds BQL support.

regards,
Marc

---

The following changes since commit 6626a0266566c5aea16178c5e6cd7fc4db3f2f56:

  Merge branch 'net-usbnet-convert-to-new-tasklet-api' (2021-01-26 18:04:28 -0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git tags/linux-can-next-for-5.12-20210127

for you to fetch changes up to 4162e18e949ba520d5116ac0323500355479a00e:

  can: mcp251xfd: add BQL support (2021-01-27 10:01:47 +0100)

----------------------------------------------------------------
linux-can-next-for-5.12-20210127

----------------------------------------------------------------
Marc Kleine-Budde (9):
      can: gw: fix typo
      can: flexcan: fix typos
      can: length: can_fd_len2dlc(): make legnth calculation readable again
      can: mcp251xfd: mcp251xfd_start_xmit(): use mcp251xfd_get_tx_free() to check TX is is full
      can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): clean up padding of CAN-FD frames
      can: mcp251xfd: mcp251xfd_hw_rx_obj_to_skb(): don't copy data for RTR CAN frames in RX-path
      can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): don't copy data for RTR CAN frames in TX-path
      can: mcp251xfd: add len8_dlc support
      can: mcp251xfd: add BQL support

Su Yanjun (1):
      can: mcp251xfd: replace sizeof(u32) with val_bytes in regmap

Tom Rix (1):
      can: mcba_usb: remove h from printk format specifier

Vincent Mailhol (1):
      can: dev: export can_get_state_str() function

 drivers/net/can/dev/dev.c                      |  3 +-
 drivers/net/can/dev/length.c                   |  7 ++-
 drivers/net/can/flexcan.c                      |  4 +-
 drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 79 ++++++++++++++++++--------
 drivers/net/can/usb/mcba_usb.c                 |  6 +-
 include/linux/can/dev.h                        |  1 +
 net/can/gw.c                                   |  2 +-
 7 files changed, 70 insertions(+), 32 deletions(-)

[net-next 01/12] can: gw: fix typo

[Marc Kleine-Budde]

This patch fixes a typo found by codespell.

Fixes: 94c23097f991 ("can: gw: support modification of Classical CAN DLCs")
Link: https://lore.kernel.org/r/20210127085529.2768537-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 net/can/gw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/can/gw.c b/net/can/gw.c
index 8598d9da0e5f..ba4124805602 100644
--- a/net/can/gw.c
+++ b/net/can/gw.c
@@ -225,7 +225,7 @@ static void mod_store_ccdlc(struct canfd_frame *cf)
 	if (ccf->len <= CAN_MAX_DLEN)
 		return;
 
-	/* potentially broken values are catched in can_can_gw_rcv() */
+	/* potentially broken values are caught in can_can_gw_rcv() */
 	if (ccf->len > CAN_MAX_RAW_DLC)
 		return;
 

base-commit: 6626a0266566c5aea16178c5e6cd7fc4db3f2f56
-- 
2.29.2

[net-next 02/12] can: flexcan: fix typos

[Marc Kleine-Budde]

This patch fixes two typos found by codespell.

Fixes: 812f0116c66a ("can: flexcan: add CAN wakeup function for i.MX8QM")
Link: https://lore.kernel.org/r/20210127085529.2768537-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/flexcan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 5d9157c655e9..971ada36e37f 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1975,14 +1975,14 @@ static int flexcan_setup_stop_mode_scfw(struct platform_device *pdev)
 	priv = netdev_priv(dev);
 	priv->scu_idx = scu_idx;
 
-	/* this function could be defered probe, return -EPROBE_DEFER */
+	/* this function could be deferred probe, return -EPROBE_DEFER */
 	return imx_scu_get_handle(&priv->sc_ipc_handle);
 }
 
 /* flexcan_setup_stop_mode - Setup stop mode for wakeup
  *
  * Return: = 0 setup stop mode successfully or doesn't support this feature
- *         < 0 fail to setup stop mode (could be defered probe)
+ *         < 0 fail to setup stop mode (could be deferred probe)
  */
 static int flexcan_setup_stop_mode(struct platform_device *pdev)
 {
-- 
2.29.2

[net-next 03/12] can: dev: export can_get_state_str() function

[Marc Kleine-Budde]

From: Vincent Mailhol <mailhol.vincent@wanadoo.fr>

The can_get_state_str() function is also relevant to the drivers. Export the
symbol and make it visible in the can/dev.h header.

Link: https://lore.kernel.org/r/20210119170355.12040-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev/dev.c | 3 ++-
 include/linux/can/dev.h   | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/dev/dev.c b/drivers/net/can/dev/dev.c
index 01e4a194f187..d9281ae853f8 100644
--- a/drivers/net/can/dev/dev.c
+++ b/drivers/net/can/dev/dev.c
@@ -74,7 +74,7 @@ static int can_rx_state_to_frame(struct net_device *dev, enum can_state state)
 	}
 }
 
-static const char *can_get_state_str(const enum can_state state)
+const char *can_get_state_str(const enum can_state state)
 {
 	switch (state) {
 	case CAN_STATE_ERROR_ACTIVE:
@@ -95,6 +95,7 @@ static const char *can_get_state_str(const enum can_state state)
 
 	return "<unknown>";
 }
+EXPORT_SYMBOL_GPL(can_get_state_str);
 
 void can_change_state(struct net_device *dev, struct can_frame *cf,
 		      enum can_state tx_state, enum can_state rx_state)
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 7faf6a37d5b2..ac4d83a1ab81 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -123,6 +123,7 @@ void unregister_candev(struct net_device *dev);
 int can_restart_now(struct net_device *dev);
 void can_bus_off(struct net_device *dev);
 
+const char *can_get_state_str(const enum can_state state);
 void can_change_state(struct net_device *dev, struct can_frame *cf,
 		      enum can_state tx_state, enum can_state rx_state);
 
-- 
2.29.2

[net-next 04/12] can: length: can_fd_len2dlc(): make legnth calculation readable again

[Marc Kleine-Budde]

In commit 652562e5ff06 ("can: length: can_fd_len2dlc(): simplify length
calculcation") the readability of the code degraded and became more error
prone. To counteract this, partially convert that patch and replace open coded
values (of the original code) with proper defines.

Fixes: 652562e5ff06 ("can: length: can_fd_len2dlc(): simplify length calculcation")
Cc: Vincent MAILHOL <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210118201346.79422-1-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev/length.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/dev/length.c b/drivers/net/can/dev/length.c
index d35c4e82314d..b48140b1102e 100644
--- a/drivers/net/can/dev/length.c
+++ b/drivers/net/can/dev/length.c
@@ -27,12 +27,17 @@ static const u8 len2dlc[] = {
 	13, 13, 13, 13, 13, 13, 13, 13,	/* 25 - 32 */
 	14, 14, 14, 14, 14, 14, 14, 14,	/* 33 - 40 */
 	14, 14, 14, 14, 14, 14, 14, 14,	/* 41 - 48 */
+	15, 15, 15, 15, 15, 15, 15, 15,	/* 49 - 56 */
+	15, 15, 15, 15, 15, 15, 15, 15	/* 57 - 64 */
 };
 
 /* map the sanitized data length to an appropriate data length code */
 u8 can_fd_len2dlc(u8 len)
 {
-	if (len >= ARRAY_SIZE(len2dlc))
+	/* check for length mapping table size at build time */
+	BUILD_BUG_ON(ARRAY_SIZE(len2dlc) != CANFD_MAX_DLEN + 1);
+
+	if (unlikely(len > CANFD_MAX_DLEN))
 		return CANFD_MAX_DLC;
 
 	return len2dlc[len];
-- 
2.29.2

[net-next 05/12] can: mcba_usb: remove h from printk format specifier

[Marc Kleine-Budde]

From: Tom Rix <trix@redhat.com>

This change fixes the checkpatch warning described in this commit commit
cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary
%h[xudi] and %hh[xudi]")

Standard integer promotion is already done and %hx and %hhx is useless so do
not encourage the use of %hh[xudi] or %h[xudi].

Link: https://lore.kernel.org/r/20210124150916.1920434-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/usb/mcba_usb.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
index 4232a7126c1b..1f649d178010 100644
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -466,7 +466,7 @@ static void mcba_usb_process_ka_usb(struct mcba_priv *priv,
 				    struct mcba_usb_msg_ka_usb *msg)
 {
 	if (unlikely(priv->usb_ka_first_pass)) {
-		netdev_info(priv->netdev, "PIC USB version %hhu.%hhu\n",
+		netdev_info(priv->netdev, "PIC USB version %u.%u\n",
 			    msg->soft_ver_major, msg->soft_ver_minor);
 
 		priv->usb_ka_first_pass = false;
@@ -492,7 +492,7 @@ static void mcba_usb_process_ka_can(struct mcba_priv *priv,
 				    struct mcba_usb_msg_ka_can *msg)
 {
 	if (unlikely(priv->can_ka_first_pass)) {
-		netdev_info(priv->netdev, "PIC CAN version %hhu.%hhu\n",
+		netdev_info(priv->netdev, "PIC CAN version %u.%u\n",
 			    msg->soft_ver_major, msg->soft_ver_minor);
 
 		priv->can_ka_first_pass = false;
@@ -554,7 +554,7 @@ static void mcba_usb_process_rx(struct mcba_priv *priv,
 		break;
 
 	default:
-		netdev_warn(priv->netdev, "Unsupported msg (0x%hhX)",
+		netdev_warn(priv->netdev, "Unsupported msg (0x%X)",
 			    msg->cmd_id);
 		break;
 	}
-- 
2.29.2

[net-next 06/12] can: mcp251xfd: replace sizeof(u32) with val_bytes in regmap

[Marc Kleine-Budde]

From: Su Yanjun <suyanjun218@gmail.com>

The sizeof(u32) is hardcoded. It's better to use the config value from the
regmap.

It increases the size of target object, but it's flexible when new mcp chip
need other val_bytes.

Link: https://lore.kernel.org/r/20210122081334.213957-1-suyanjun218@gmail.com
Signed-off-by: Su Yanjun <suyanjun218@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 00e9855c23d1..897c9310266a 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -1308,6 +1308,7 @@ mcp251xfd_tef_obj_read(const struct mcp251xfd_priv *priv,
 		       const u8 offset, const u8 len)
 {
 	const struct mcp251xfd_tx_ring *tx_ring = priv->tx;
+	const int val_bytes = regmap_get_val_bytes(priv->map_rx);
 
 	if (IS_ENABLED(CONFIG_CAN_MCP251XFD_SANITY) &&
 	    (offset > tx_ring->obj_num ||
@@ -1322,7 +1323,7 @@ mcp251xfd_tef_obj_read(const struct mcp251xfd_priv *priv,
 	return regmap_bulk_read(priv->map_rx,
 				mcp251xfd_get_tef_obj_addr(offset),
 				hw_tef_obj,
-				sizeof(*hw_tef_obj) / sizeof(u32) * len);
+				sizeof(*hw_tef_obj) / val_bytes * len);
 }
 
 static int mcp251xfd_handle_tefif(struct mcp251xfd_priv *priv)
@@ -1510,12 +1511,13 @@ mcp251xfd_rx_obj_read(const struct mcp251xfd_priv *priv,
 		      struct mcp251xfd_hw_rx_obj_canfd *hw_rx_obj,
 		      const u8 offset, const u8 len)
 {
+	const int val_bytes = regmap_get_val_bytes(priv->map_rx);
 	int err;
 
 	err = regmap_bulk_read(priv->map_rx,
 			       mcp251xfd_get_rx_obj_addr(ring, offset),
 			       hw_rx_obj,
-			       len * ring->obj_size / sizeof(u32));
+			       len * ring->obj_size / val_bytes);
 
 	return err;
 }
@@ -2137,6 +2139,7 @@ static int mcp251xfd_handle_spicrcif(struct mcp251xfd_priv *priv)
 static irqreturn_t mcp251xfd_irq(int irq, void *dev_id)
 {
 	struct mcp251xfd_priv *priv = dev_id;
+	const int val_bytes = regmap_get_val_bytes(priv->map_reg);
 	irqreturn_t handled = IRQ_NONE;
 	int err;
 
@@ -2162,7 +2165,7 @@ static irqreturn_t mcp251xfd_irq(int irq, void *dev_id)
 		err = regmap_bulk_read(priv->map_reg, MCP251XFD_REG_INT,
 				       &priv->regs_status,
 				       sizeof(priv->regs_status) /
-				       sizeof(u32));
+				       val_bytes);
 		if (err)
 			goto out_fail;
 
-- 
2.29.2

[net-next 07/12] can: mcp251xfd: mcp251xfd_start_xmit(): use mcp251xfd_get_tx_free() to check TX is is full

[Marc Kleine-Budde]

This patch replaces an open coded check if the TX ring is full by a check if
mcp251xfd_get_tx_free() returns 0.

Link: https://lore.kernel.org/r/20210114153448.1506901-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 897c9310266a..1dbb87c28049 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -2436,7 +2436,7 @@ static netdev_tx_t mcp251xfd_start_xmit(struct sk_buff *skb,
 	/* Stop queue if we occupy the complete TX FIFO */
 	tx_head = mcp251xfd_get_tx_head(tx_ring);
 	tx_ring->head++;
-	if (tx_ring->head - tx_ring->tail >= tx_ring->obj_num)
+	if (mcp251xfd_get_tx_free(tx_ring) == 0)
 		netif_stop_queue(ndev);
 
 	can_put_echo_skb(skb, ndev, tx_head, 0);
-- 
2.29.2

[net-next 08/12] can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): clean up padding of CAN-FD frames

[Marc Kleine-Budde]

CAN-FD frames have only specific frame length (0, 1, 2, 3, 4, 5, 6, 7, 8, 12,
16, 20, 24, 32, 48, 64). A CAN-FD frame provided by user space might not cover
the whole CAN-FD frame. To avoid sending garbage over the CAN bus the driver
pads the CAN frame with 0x0 (if MCP251XFD_SANITIZE_CAN is activated).

This patch cleans up the pad len calculation. Rounding to full u32 brings no
benefit, in case of CRC transfers, the hw_tx_obj->data is not aligned to u32
anyway.

Link: https://lore.kernel.org/r/20210114153448.1506901-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 1dbb87c28049..aa992e71d787 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -2303,7 +2303,7 @@ mcp251xfd_tx_obj_from_skb(const struct mcp251xfd_priv *priv,
 	union mcp251xfd_tx_obj_load_buf *load_buf;
 	u8 dlc;
 	u32 id, flags;
-	int offset, len;
+	int pad_len, len;
 
 	if (cfd->can_id & CAN_EFF_FLAG) {
 		u32 sid, eid;
@@ -2351,13 +2351,14 @@ mcp251xfd_tx_obj_from_skb(const struct mcp251xfd_priv *priv,
 	put_unaligned_le32(id, &hw_tx_obj->id);
 	put_unaligned_le32(flags, &hw_tx_obj->flags);
 
-	/* Clear data at end of CAN frame */
-	offset = round_down(cfd->len, sizeof(u32));
-	len = round_up(can_fd_dlc2len(dlc), sizeof(u32)) - offset;
-	if (MCP251XFD_SANITIZE_CAN && len)
-		memset(hw_tx_obj->data + offset, 0x0, len);
+	/* Copy data */
 	memcpy(hw_tx_obj->data, cfd->data, cfd->len);
 
+	/* Clear unused data at end of CAN frame */
+	pad_len = can_fd_dlc2len(dlc) - cfd->len;
+	if (MCP251XFD_SANITIZE_CAN && pad_len)
+		memset(hw_tx_obj->data + cfd->len, 0x0, pad_len);
+
 	/* Number of bytes to be written into the RAM of the controller */
 	len = sizeof(hw_tx_obj->id) + sizeof(hw_tx_obj->flags);
 	if (MCP251XFD_SANITIZE_CAN)
-- 
2.29.2

[net-next 09/12] can: mcp251xfd: mcp251xfd_hw_rx_obj_to_skb(): don't copy data for RTR CAN frames in RX-path

[Marc Kleine-Budde]

In Classical CAN there are RTR frames. RTR frames have the RTR bit set, may
have a dlc != 0, but contain no data.

This patch changes the RX-path to no copy any data for RTR frames, so that the
data field in the CAN frame stays 0x0.

Link: https://lore.kernel.org/r/20210114153448.1506901-4-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index aa992e71d787..92816be4f3d4 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -1474,7 +1474,8 @@ mcp251xfd_hw_rx_obj_to_skb(const struct mcp251xfd_priv *priv,
 						 hw_rx_obj->flags));
 	}
 
-	memcpy(cfd->data, hw_rx_obj->data, cfd->len);
+	if (!(hw_rx_obj->flags & MCP251XFD_OBJ_FLAGS_RTR))
+		memcpy(cfd->data, hw_rx_obj->data, cfd->len);
 }
 
 static int
-- 
2.29.2

[net-next 10/12] can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): don't copy data for RTR CAN frames in TX-path

[Marc Kleine-Budde]

In Classical CAN there are RTR frames. RTR frames have the RTR bit set, may
have a dlc != 0, but contain no data.

This patch optimizes the TX-path to not copy any data for RTR frames.

Link: https://lore.kernel.org/r/20210114153448.1506901-5-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 92816be4f3d4..e6d98e172a47 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -2304,7 +2304,7 @@ mcp251xfd_tx_obj_from_skb(const struct mcp251xfd_priv *priv,
 	union mcp251xfd_tx_obj_load_buf *load_buf;
 	u8 dlc;
 	u32 id, flags;
-	int pad_len, len;
+	int len_sanitized = 0, len;
 
 	if (cfd->can_id & CAN_EFF_FLAG) {
 		u32 sid, eid;
@@ -2331,6 +2331,8 @@ mcp251xfd_tx_obj_from_skb(const struct mcp251xfd_priv *priv,
 
 	if (cfd->can_id & CAN_RTR_FLAG)
 		flags |= MCP251XFD_OBJ_FLAGS_RTR;
+	else
+		len_sanitized = canfd_sanitize_len(cfd->len);
 
 	/* CANFD */
 	if (can_is_canfd_skb(skb)) {
@@ -2356,14 +2358,18 @@ mcp251xfd_tx_obj_from_skb(const struct mcp251xfd_priv *priv,
 	memcpy(hw_tx_obj->data, cfd->data, cfd->len);
 
 	/* Clear unused data at end of CAN frame */
-	pad_len = can_fd_dlc2len(dlc) - cfd->len;
-	if (MCP251XFD_SANITIZE_CAN && pad_len)
-		memset(hw_tx_obj->data + cfd->len, 0x0, pad_len);
+	if (MCP251XFD_SANITIZE_CAN && len_sanitized) {
+		int pad_len;
+
+		pad_len = len_sanitized - cfd->len;
+		if (pad_len)
+			memset(hw_tx_obj->data + cfd->len, 0x0, pad_len);
+	}
 
 	/* Number of bytes to be written into the RAM of the controller */
 	len = sizeof(hw_tx_obj->id) + sizeof(hw_tx_obj->flags);
 	if (MCP251XFD_SANITIZE_CAN)
-		len += round_up(can_fd_dlc2len(dlc), sizeof(u32));
+		len += round_up(len_sanitized, sizeof(u32));
 	else
 		len += round_up(cfd->len, sizeof(u32));
 
-- 
2.29.2

[net-next 11/12] can: mcp251xfd: add len8_dlc support

[Marc Kleine-Budde]

This patch adds support for the Classical CAN raw DLC functionality to send and
receive DLC values from 9 ... 15 to the mcp251xfd driver.

Link: https://lore.kernel.org/r/20210114153448.1506901-6-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 .../net/can/spi/mcp251xfd/mcp251xfd-core.c    | 23 ++++++++++++-------
 1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index e6d98e172a47..8f78a29db39b 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -1439,6 +1439,7 @@ mcp251xfd_hw_rx_obj_to_skb(const struct mcp251xfd_priv *priv,
 			   struct sk_buff *skb)
 {
 	struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
+	u8 dlc;
 
 	if (hw_rx_obj->flags & MCP251XFD_OBJ_FLAGS_IDE) {
 		u32 sid, eid;
@@ -1454,9 +1455,10 @@ mcp251xfd_hw_rx_obj_to_skb(const struct mcp251xfd_priv *priv,
 					hw_rx_obj->id);
 	}
 
+	dlc = FIELD_GET(MCP251XFD_OBJ_FLAGS_DLC, hw_rx_obj->flags);
+
 	/* CANFD */
 	if (hw_rx_obj->flags & MCP251XFD_OBJ_FLAGS_FDF) {
-		u8 dlc;
 
 		if (hw_rx_obj->flags & MCP251XFD_OBJ_FLAGS_ESI)
 			cfd->flags |= CANFD_ESI;
@@ -1464,14 +1466,13 @@ mcp251xfd_hw_rx_obj_to_skb(const struct mcp251xfd_priv *priv,
 		if (hw_rx_obj->flags & MCP251XFD_OBJ_FLAGS_BRS)
 			cfd->flags |= CANFD_BRS;
 
-		dlc = FIELD_GET(MCP251XFD_OBJ_FLAGS_DLC, hw_rx_obj->flags);
 		cfd->len = can_fd_dlc2len(dlc);
 	} else {
 		if (hw_rx_obj->flags & MCP251XFD_OBJ_FLAGS_RTR)
 			cfd->can_id |= CAN_RTR_FLAG;
 
-		cfd->len = can_cc_dlc2len(FIELD_GET(MCP251XFD_OBJ_FLAGS_DLC,
-						 hw_rx_obj->flags));
+		can_frame_set_cc_len((struct can_frame *)cfd, dlc,
+				     priv->can.ctrlmode);
 	}
 
 	if (!(hw_rx_obj->flags & MCP251XFD_OBJ_FLAGS_RTR))
@@ -2325,9 +2326,7 @@ mcp251xfd_tx_obj_from_skb(const struct mcp251xfd_priv *priv,
 	 * harm, only the lower 7 bits will be transferred into the
 	 * TEF object.
 	 */
-	dlc = can_fd_len2dlc(cfd->len);
-	flags |= FIELD_PREP(MCP251XFD_OBJ_FLAGS_SEQ_MCP2518FD_MASK, seq) |
-		FIELD_PREP(MCP251XFD_OBJ_FLAGS_DLC, dlc);
+	flags |= FIELD_PREP(MCP251XFD_OBJ_FLAGS_SEQ_MCP2518FD_MASK, seq);
 
 	if (cfd->can_id & CAN_RTR_FLAG)
 		flags |= MCP251XFD_OBJ_FLAGS_RTR;
@@ -2343,8 +2342,15 @@ mcp251xfd_tx_obj_from_skb(const struct mcp251xfd_priv *priv,
 
 		if (cfd->flags & CANFD_BRS)
 			flags |= MCP251XFD_OBJ_FLAGS_BRS;
+
+		dlc = can_fd_len2dlc(cfd->len);
+	} else {
+		dlc = can_get_cc_dlc((struct can_frame *)cfd,
+				     priv->can.ctrlmode);
 	}
 
+	flags |= FIELD_PREP(MCP251XFD_OBJ_FLAGS_DLC, dlc);
+
 	load_buf = &tx_obj->buf;
 	if (priv->devtype_data.quirks & MCP251XFD_QUIRK_CRC_TX)
 		hw_tx_obj = &load_buf->crc.hw_tx_obj;
@@ -2896,7 +2902,8 @@ static int mcp251xfd_probe(struct spi_device *spi)
 	priv->can.data_bittiming_const = &mcp251xfd_data_bittiming_const;
 	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
 		CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_BERR_REPORTING |
-		CAN_CTRLMODE_FD | CAN_CTRLMODE_FD_NON_ISO;
+		CAN_CTRLMODE_FD | CAN_CTRLMODE_FD_NON_ISO |
+		CAN_CTRLMODE_CC_LEN8_DLC;
 	priv->ndev = ndev;
 	priv->spi = spi;
 	priv->rx_int = rx_int;
-- 
2.29.2

[net-next 12/12] can: mcp251xfd: add BQL support

[Marc Kleine-Budde]

This patch adds BQL support to the driver. Support for netdev_xmit_more() will
be added in a separate patch series.

Link: https://lore.kernel.org/r/20210114153448.1506901-7-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 .../net/can/spi/mcp251xfd/mcp251xfd-core.c    | 21 +++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 8f78a29db39b..3638b474d86b 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -335,6 +335,8 @@ static void mcp251xfd_ring_init(struct mcp251xfd_priv *priv)
 	u8 len;
 	int i, j;
 
+	netdev_reset_queue(priv->ndev);
+
 	/* TEF */
 	tef_ring = priv->tef;
 	tef_ring->head = 0;
@@ -1249,7 +1251,8 @@ mcp251xfd_handle_tefif_recover(const struct mcp251xfd_priv *priv, const u32 seq)
 
 static int
 mcp251xfd_handle_tefif_one(struct mcp251xfd_priv *priv,
-			   const struct mcp251xfd_hw_tef_obj *hw_tef_obj)
+			   const struct mcp251xfd_hw_tef_obj *hw_tef_obj,
+			   unsigned int *frame_len_ptr)
 {
 	struct net_device_stats *stats = &priv->ndev->stats;
 	u32 seq, seq_masked, tef_tail_masked;
@@ -1271,7 +1274,8 @@ mcp251xfd_handle_tefif_one(struct mcp251xfd_priv *priv,
 	stats->tx_bytes +=
 		can_rx_offload_get_echo_skb(&priv->offload,
 					    mcp251xfd_get_tef_tail(priv),
-					    hw_tef_obj->ts, NULL);
+					    hw_tef_obj->ts,
+					    frame_len_ptr);
 	stats->tx_packets++;
 	priv->tef->tail++;
 
@@ -1329,6 +1333,7 @@ mcp251xfd_tef_obj_read(const struct mcp251xfd_priv *priv,
 static int mcp251xfd_handle_tefif(struct mcp251xfd_priv *priv)
 {
 	struct mcp251xfd_hw_tef_obj hw_tef_obj[MCP251XFD_TX_OBJ_NUM_MAX];
+	unsigned int total_frame_len = 0;
 	u8 tef_tail, len, l;
 	int err, i;
 
@@ -1350,7 +1355,9 @@ static int mcp251xfd_handle_tefif(struct mcp251xfd_priv *priv)
 	}
 
 	for (i = 0; i < len; i++) {
-		err = mcp251xfd_handle_tefif_one(priv, &hw_tef_obj[i]);
+		unsigned int frame_len;
+
+		err = mcp251xfd_handle_tefif_one(priv, &hw_tef_obj[i], &frame_len);
 		/* -EAGAIN means the Sequence Number in the TEF
 		 * doesn't match our tef_tail. This can happen if we
 		 * read the TEF objects too early. Leave loop let the
@@ -1360,6 +1367,8 @@ static int mcp251xfd_handle_tefif(struct mcp251xfd_priv *priv)
 			goto out_netif_wake_queue;
 		if (err)
 			return err;
+
+		total_frame_len += frame_len;
 	}
 
  out_netif_wake_queue:
@@ -1390,6 +1399,7 @@ static int mcp251xfd_handle_tefif(struct mcp251xfd_priv *priv)
 			return err;
 
 		tx_ring->tail += len;
+		netdev_completed_queue(priv->ndev, len, total_frame_len);
 
 		err = mcp251xfd_check_tef_tail(priv);
 		if (err)
@@ -2435,6 +2445,7 @@ static netdev_tx_t mcp251xfd_start_xmit(struct sk_buff *skb,
 	struct mcp251xfd_priv *priv = netdev_priv(ndev);
 	struct mcp251xfd_tx_ring *tx_ring = priv->tx;
 	struct mcp251xfd_tx_obj *tx_obj;
+	unsigned int frame_len;
 	u8 tx_head;
 	int err;
 
@@ -2453,7 +2464,9 @@ static netdev_tx_t mcp251xfd_start_xmit(struct sk_buff *skb,
 	if (mcp251xfd_get_tx_free(tx_ring) == 0)
 		netif_stop_queue(ndev);
 
-	can_put_echo_skb(skb, ndev, tx_head, 0);
+	frame_len = can_skb_get_frame_len(skb);
+	can_put_echo_skb(skb, ndev, tx_head, frame_len);
+	netdev_sent_queue(priv->ndev, frame_len);
 
 	err = mcp251xfd_tx_obj_write(priv, tx_obj);
 	if (err)
-- 
2.29.2

Re: pull-request: can-next 2021-01-27

[patchwork-bot+netdevbpf]

Hello:

This pull request was applied to netdev/net-next.git (refs/heads/master):

On Wed, 27 Jan 2021 10:22:15 +0100 you wrote:
> Hello Jakub, hello David,
> 
> this is a pull request of 12 patches for net-next/master.
> 
> The first two patches are by me and fix typos on the CAN gw protocol and the
> flexcan driver.
> 
> [...]

Here is the summary with links:
  - pull-request: can-next 2021-01-27
    https://git.kernel.org/netdev/net-next/c/df9d80470a0c

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [net-next 01/12] can: gw: fix typo

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Wed, 27 Jan 2021 10:22:16 +0100 you wrote:
> This patch fixes a typo found by codespell.
> 
> Fixes: 94c23097f991 ("can: gw: support modification of Classical CAN DLCs")
> Link: https://lore.kernel.org/r/20210127085529.2768537-3-mkl@pengutronix.de
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> ---
>  net/can/gw.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> [...]

Here is the summary with links:
  - [net-next,01/12] can: gw: fix typo
    https://git.kernel.org/netdev/net-next/c/12da7a1f3cb6
  - [net-next,02/12] can: flexcan: fix typos
    https://git.kernel.org/netdev/net-next/c/02ee68081791
  - [net-next,03/12] can: dev: export can_get_state_str() function
    https://git.kernel.org/netdev/net-next/c/6fe27d68b456
  - [net-next,04/12] can: length: can_fd_len2dlc(): make legnth calculation readable again
    https://git.kernel.org/netdev/net-next/c/54eca60b1c94
  - [net-next,05/12] can: mcba_usb: remove h from printk format specifier
    https://git.kernel.org/netdev/net-next/c/22d63be91c50
  - [net-next,06/12] can: mcp251xfd: replace sizeof(u32) with val_bytes in regmap
    https://git.kernel.org/netdev/net-next/c/cdc4c698e4be
  - [net-next,07/12] can: mcp251xfd: mcp251xfd_start_xmit(): use mcp251xfd_get_tx_free() to check TX is is full
    https://git.kernel.org/netdev/net-next/c/9845b8f53019
  - [net-next,08/12] can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): clean up padding of CAN-FD frames
    https://git.kernel.org/netdev/net-next/c/561aa5b4ce22
  - [net-next,09/12] can: mcp251xfd: mcp251xfd_hw_rx_obj_to_skb(): don't copy data for RTR CAN frames in RX-path
    https://git.kernel.org/netdev/net-next/c/e20b85c7eb2e
  - [net-next,10/12] can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): don't copy data for RTR CAN frames in TX-path
    https://git.kernel.org/netdev/net-next/c/a68eda203676
  - [net-next,11/12] can: mcp251xfd: add len8_dlc support
    https://git.kernel.org/netdev/net-next/c/86f1e3b1dd9f
  - [net-next,12/12] can: mcp251xfd: add BQL support
    https://git.kernel.org/netdev/net-next/c/4162e18e949b

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html