[PATCH net-next 12/22] can: m_can: fix block comment style

[Marc Kleine-Budde <mkl@pengutronix.de>]

This patch fixes the commenting style in the m_can driver.

Fixes: 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context")
Fixes: df06fd678260 ("can: m_can: m_can_chip_config(): enable and configure internal timestamps")
Link: https://lore.kernel.org/r/20210819111703.599686-2-mkl@pengutronix.de
Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/m_can/m_can.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 91351eef6bf8..47ddee80c423 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -437,7 +437,7 @@ static void m_can_clean(struct net_device *net)
  * napi. For non-peripherals, RX is done in napi already, so push
  * directly. timestamp is used to ensure good skb ordering in
  * rx-offload and is ignored for non-peripherals.
-*/
+ */
 static void m_can_receive_skb(struct m_can_classdev *cdev,
 			      struct sk_buff *skb,
 			      u32 timestamp)
@@ -946,7 +946,7 @@ static int m_can_poll(struct napi_struct *napi, int quota)
 /* Echo tx skb and update net stats. Peripherals use rx-offload for
  * echo. timestamp is used for peripherals to ensure correct ordering
  * by rx-offload, and is ignored for non-peripherals.
-*/
+ */
 static void m_can_tx_update_stats(struct m_can_classdev *cdev,
 				  unsigned int msg_mark,
 				  u32 timestamp)
@@ -1306,7 +1306,8 @@ static void m_can_chip_config(struct net_device *dev)
 	m_can_set_bittiming(dev);
 
 	/* enable internal timestamp generation, with a prescalar of 16. The
-	 * prescalar is applied to the nominal bit timing */
+	 * prescalar is applied to the nominal bit timing
+	 */
 	m_can_write(cdev, M_CAN_TSCC, FIELD_PREP(TSCC_TCP_MASK, 0xf));
 
 	m_can_config_endisable(cdev, false);
-- 
2.32.0