From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
kernel@pengutronix.de, Dario Binacchi <dariobin@libero.it>,
Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH net-next 19/22] can: c_can: remove struct c_can_priv::priv field
Date: Thu, 19 Aug 2021 15:39:10 +0200 [thread overview]
Message-ID: <20210819133913.657715-20-mkl@pengutronix.de> (raw)
In-Reply-To: <20210819133913.657715-1-mkl@pengutronix.de>
From: Dario Binacchi <dariobin@libero.it>
It references the clock but it is never used. So let's remove it.
Link: https://lore.kernel.org/r/20210807130800.5246-2-dariobin@libero.it
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/net/can/c_can/c_can.h | 1 -
drivers/net/can/c_can/c_can_platform.c | 1 -
2 files changed, 2 deletions(-)
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 4247ff80a29c..8f23e9c83c84 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -200,7 +200,6 @@ struct c_can_priv {
void (*write_reg32)(const struct c_can_priv *priv, enum reg index, u32 val);
void __iomem *base;
const u16 *regs;
- void *priv; /* for board-specific data */
enum c_can_dev_id type;
struct c_can_raminit raminit_sys; /* RAMINIT via syscon regmap */
void (*raminit)(const struct c_can_priv *priv, bool enable);
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 36950363682f..86e95e9d6533 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -385,7 +385,6 @@ static int c_can_plat_probe(struct platform_device *pdev)
priv->base = addr;
priv->device = &pdev->dev;
priv->can.clock.freq = clk_get_rate(clk);
- priv->priv = clk;
priv->type = drvdata->id;
platform_set_drvdata(pdev, dev);
--
2.32.0
next prev parent reply other threads:[~2021-08-19 13:39 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-19 13:38 pull-request: can-next 2021-08-19 Marc Kleine-Budde
2021-08-19 13:38 ` [PATCH net-next 01/22] mailmap: update email address of Matthias Fuchs and Thomas Körper Marc Kleine-Budde
2021-08-19 13:38 ` [PATCH net-next 02/22] dt-bindings: can-controller: add support for termination-gpios Marc Kleine-Budde
2021-08-19 13:38 ` [PATCH net-next 03/22] dt-bindings: can: fsl,flexcan: enable termination-* bindings Marc Kleine-Budde
2021-08-19 13:38 ` [PATCH net-next 04/22] can: dev: provide optional GPIO based termination support Marc Kleine-Budde
2021-08-19 13:38 ` [PATCH net-next 05/22] can: netlink: allow user to turn off unsupported features Marc Kleine-Budde
2021-08-19 13:38 ` [PATCH net-next 06/22] MAINTAINERS: add Vincent MAILHOL as maintainer for the ETAS ES58X CAN/USB driver Marc Kleine-Budde
2021-08-19 13:38 ` [PATCH net-next 07/22] can: etas_es58x: clean-up documentation of struct es58x_fd_tx_conf_msg Marc Kleine-Budde
2021-08-19 13:38 ` [PATCH net-next 08/22] can: mcp251xfd: mark some instances of struct mcp251xfd_priv as const Marc Kleine-Budde
2021-08-19 13:39 ` [PATCH net-next 09/22] dt-bindings: net: can: renesas,rcar-canfd: Document RZ/G2L SoC Marc Kleine-Budde
2021-08-19 13:39 ` [PATCH net-next 10/22] can: rcar_canfd: Add support for RZ/G2L family Marc Kleine-Budde
2021-08-19 13:39 ` [PATCH net-next 11/22] can: tcan4x5x: cdev_to_priv(): remove stray empty line Marc Kleine-Budde
2021-08-19 13:39 ` [PATCH net-next 12/22] can: m_can: fix block comment style Marc Kleine-Budde
2021-08-19 13:39 ` [PATCH net-next 13/22] can: m_can: Disable IRQs on FIFO bus errors Marc Kleine-Budde
2021-08-19 13:39 ` [PATCH net-next 14/22] can: m_can: Batch FIFO reads during CAN receive Marc Kleine-Budde
2021-08-19 13:39 ` [PATCH net-next 15/22] can: m_can: Batch FIFO writes during CAN transmit Marc Kleine-Budde
2021-08-19 13:39 ` [PATCH net-next 16/22] dt-bindings: net: can: c_can: convert to json-schema Marc Kleine-Budde
2021-08-19 13:39 ` [PATCH net-next 17/22] can: c_can: c_can_do_tx(): fix typo in comment Marc Kleine-Budde
2021-08-19 13:39 ` [PATCH net-next 18/22] can: c_can: rename IF_RX -> IF_NAPI Marc Kleine-Budde
2021-08-19 13:39 ` Marc Kleine-Budde [this message]
2021-08-19 13:39 ` [PATCH net-next 20/22] can: c_can: exit c_can_do_tx() early if no frames have been sent Marc Kleine-Budde
2021-08-19 13:39 ` [PATCH net-next 21/22] can: c_can: support tx ring algorithm Marc Kleine-Budde
2021-08-19 13:39 ` [PATCH net-next 22/22] can: c_can: cache frames to operate as a true FIFO Marc Kleine-Budde
2021-08-19 19:00 ` pull-request: can-next 2021-08-19 patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210819133913.657715-20-mkl@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=dariobin@libero.it \
--cc=davem@davemloft.net \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).