On 03.06.2022 19:28:43, Vincent Mailhol wrote: > In the next patches, the software/virtual drivers (slcan, v(x)can) > will depend on drivers/net/can/dev/skb.o. > > This patch changes the scope of the can-dev module to include the > above mentioned drivers. > > To do so, we reuse the menu "CAN Device Drivers" and turn it into a > configmenu using the config symbol CAN_DEV (which we released in > previous patch). Also, add a description to this new CAN_DEV > menuconfig. > > The symbol CAN_DEV now only triggers the build of skb.o. For this > reasons, all the macros from linux/module.h are deported from > drivers/net/can/dev/dev.c to drivers/net/can/dev/skb.c. > > Finally, drivers/net/can/dev/Makefile is adjusted accordingly. > > Suggested-by: Oliver Hartkopp > Signed-off-by: Vincent Mailhol > --- > drivers/net/can/Kconfig | 29 ++++++++++++++++++++++++++--- > drivers/net/can/dev/Makefile | 16 +++++++++------- > drivers/net/can/dev/dev.c | 9 +-------- > drivers/net/can/dev/skb.c | 7 +++++++ > 4 files changed, 43 insertions(+), 18 deletions(-) > > diff --git a/drivers/net/can/dev/Makefile b/drivers/net/can/dev/Makefile > index 5b4c813c6222..919f87e36eed 100644 > --- a/drivers/net/can/dev/Makefile > +++ b/drivers/net/can/dev/Makefile > @@ -1,9 +1,11 @@ > # SPDX-License-Identifier: GPL-2.0 > > -obj-$(CONFIG_CAN_NETLINK) += can-dev.o ^^^^^^^^^^^^^^^^^^^^^ Nitpick: I think you can directly use "y" here. Marc -- Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung West/Dortmund | Phone: +49-231-2826-924 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |