messages from 2020-11-12 18:04:39 to 2020-11-23 11:35:47 UTC [more...]
[net] can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
2020-11-23 11:35 UTC
[net-next 0/2] can: mcp251xfd: rx-path: reduce number of SPI core requests to set UINC bit
2020-11-23 11:16 UTC (3+ messages)
` [net-next 1/2] can: mcp251xfd: mcp25xxfd_ring_alloc(): add define instead open coding the maximum number of RX objects
` [net-next 2/2] can: mcp251xfd: rx-path: reduce number of SPI core requests to set UINC bit
BUG: receive list entry not found for dev vcan0, id 001, mask C00007FF
2020-11-23 9:55 UTC
[PATCH 000/141] Fix fall-through warnings for Clang
2020-11-22 23:04 UTC (25+ messages)
` [PATCH 072/141] can: peak_usb: "
pull-request: can-next 2020-11-20
2020-11-21 23:09 UTC (27+ messages)
` [net-next 01/25] can: j1939: add tables for the CAN identifier and its fields
` [net-next 02/25] can: add optional DLC element to Classical CAN frame structure
` [net-next 03/25] can: rename get_can_dlc() macro with can_cc_dlc2len()
` [net-next 04/25] can: remove obsolete get_canfd_dlc() macro
` [net-next 05/25] can: replace can_dlc as variable/element for payload length
` [net-next 06/25] can: rename CAN FD related can_len2dlc and can_dlc2len helpers
` [net-next 07/25] can: update documentation for DLC usage in Classical CAN
` [net-next 08/25] can: drivers: introduce helpers to access Classical CAN DLC values
` [net-next 09/25] can: drivers: add len8_dlc support for various CAN adapters
` [net-next 10/25] can: drivers: add len8_dlc support for esd_usb2 CAN adapter
` [net-next 11/25] can: gw: support modification of Classical CAN DLCs
` [net-next 12/25] dt-bindings: can: fsl,flexcan: add uint32 reference to clock-frequency property
` [net-next 13/25] dt-bindings: can: fsl,flexcan: fix fsl,clk-source property
` [net-next 14/25] dt-bindings: firmware: add IMX_SC_R_CAN(x) macro for CAN
` [net-next 15/25] can: flexcan: rename macro FLEXCAN_QUIRK_SETUP_STOP_MODE -> FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR
` [net-next 16/25] can: flexcan: factor out enabling and disabling of interrupts into separate function
` [net-next 17/25] can: flexcan: move enabling/disabling of interrupts from flexcan_chip_{start,stop}() to callers
` [net-next 18/25] can: flexcan: flexcan_rx_offload_setup(): factor out mailbox and rx-offload setup into separate function
` [net-next 19/25] can: flexcan: flexcan_open(): completely initialize controller before requesting IRQ
` [net-next 20/25] can: flexcan: flexcan_close(): change order if commands to properly shut down the controller
` [net-next 21/25] can: kvaser_usb: Add USB_{LEAF,HYDRA}_PRODUCT_ID_END defines
` [net-next 22/25] can: kvaser_usb: Add new Kvaser Leaf v2 devices
` [net-next 23/25] can: kvaser_usb: kvaser_usb_hydra: Add support for new device variant
` [net-next 24/25] can: kvaser_usb: Add new Kvaser hydra devices
` [PATCH 25/25] can: mcp251xfd: remove useless code in mcp251xfd_chip_softreset
vcan rate limit
2020-11-21 20:43 UTC
MCP2518FD Treiber
2020-11-21 13:02 UTC
Question on CAN FD Driver for mcp251xfd
2020-11-20 19:04 UTC (4+ messages)
mcp251xfd on RPi 5.4 downstream
2020-11-20 13:16 UTC (3+ messages)
[PATCH V5 0/5] can: flexcan: add stop mode support for i.MX8QM
2020-11-20 12:24 UTC (3+ messages)
` [PATCH V5 5/5] can: flexcan: add CAN wakeup function "
[net] can: gs_usb: fix endianess problem with candleLight firmware
2020-11-20 12:07 UTC (5+ messages)
[PATCH v6 4/8 rebased] can: replace can_dlc as variable/element for payload length
2020-11-20 11:18 UTC (4+ messages)
[PATCH v6 0/8] Introduce optional DLC element for Classic CAN
2020-11-20 9:49 UTC (3+ messages)
` [PATCH v6 4/8] can: replace can_dlc as variable/element for payload length
` broken on next-next - "
[net-next v2 PATCH 0/5] flexcan: fix hanging flexcan_close()
2020-11-19 10:09 UTC (6+ messages)
` [net-next v2 1/5] can: flexcan: factor out enabling and disabling of interrupts into separate function
` [net-next v2 2/5] can: flexcan: move enabling/disabling of interrupts from flexcan_chip_{start,stop}() to callers
` [net-next v2 3/5] can: flexcan: flexcan_rx_offload_setup(): factor out mailbox and rx-offload setup into separate function
` [net-next v2 4/5] can: flexcan: flexcan_open(): completely initialize controller before requesting IRQ
` [net-next v2 5/5] can: flexcan: flexcan_close(): change order if commands to properly shut down the controller
[net-next PATCH 0/5] flexcan: fix hanging flexcan_close()
2020-11-19 9:49 UTC (8+ messages)
` [PATCH 1/5] can: flexcan: factor out enabling and disabling of interrupts into separate function
` [PATCH 2/5] can: flexcan: move enabling/disabling of interrupts from flexcan_chip_{start,stop}() to callers
` [PATCH 3/5] can: flexcan: flexcan_rx_offload_setup(): factor out mailbox and rx-offload setup into separate function
` [PATCH 4/5] can: flexcan: flexcan_open(): completely initialize controller before requesting IRQ
` [PATCH 5/5] can: flexcan: flexcan_close(): change order if commands to properly shut down the controller
[PATCH] ARM: dts: dra76x: m_can: fix order of clocks
2020-11-19 9:38 UTC (2+ messages)
[PATCH net-next v2] can: gw: support modification of Classical CAN DLCs
2020-11-19 9:12 UTC (2+ messages)
[mkl-can-next:testing 20/27] drivers/net/can/flexcan.c:1389:6: warning: variable 'err' set but not used
2020-11-19 8:44 UTC (2+ messages)
[PATCH] can: m_can: Add PCI glue driver for Intel Elkhart Lake
2020-11-19 8:22 UTC (4+ messages)
[PATCH] dt-bindings: can: fsl,flexcan: add uint32 reference to clock-frequency property
2020-11-19 7:33 UTC
pull-request: can 2020-11-18
2020-11-19 7:10 UTC (7+ messages)
` [net 1/4] can: kvaser_pciefd: Fix KCAN bittiming limits
` [net 2/4] can: kvaser_usb: kvaser_usb_hydra: "
` [net 3/4] can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
` [net 4/4] can: m_can: process interrupt only when not runtime suspended
[PATCH] can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
2020-11-19 0:59 UTC (2+ messages)
[PATCH net-next] can: gw: support modification of Classical CAN DLCs
2020-11-18 20:19 UTC
[PATCH v2 0/1] NET: mcan: Move runtime PM enable/disable to m_can_platform
2020-11-18 15:47 UTC (4+ messages)
` [PATCH v2 1/1] "
[PATCH] can: m_can: Process interrupt only when not runtime suspended
2020-11-18 15:23 UTC (2+ messages)
[PATCH] Fix attribute list size in do_get_nl_link()
2020-11-17 15:53 UTC (4+ messages)
` AW: "
pull-request: can 2020-11-15
2020-11-17 14:02 UTC (21+ messages)
` [net 01/15] can: af_can: prevent potential access of uninitialized member in can_rcv()
` [net 02/15] can: af_can: prevent potential access of uninitialized member in canfd_rcv()
` [net 03/15] can: dev: can_restart(): post buffer from the right context
` [net 04/15] can: ti_hecc: Fix memleak in ti_hecc_probe
` [net 05/15] can: mcba_usb: mcba_usb_start_xmit(): first fill skb, then pass to can_put_echo_skb()
` [net 06/15] can: peak_usb: fix potential integer overflow on shift of a int
` [net 07/15] can: flexcan: flexcan_setup_stop_mode(): add missing "req_bit" to stop mode property comment
` [net 08/15] can: flexcan: fix failure handling of pm_runtime_get_sync()
` [net 09/15] can: tcan4x5x: replace depends on REGMAP_SPI with depends on SPI
` [net 10/15] can: tcan4x5x: tcan4x5x_can_probe(): add missing error checking for devm_regmap_init()
` [net 11/15] can: tcan4x5x: tcan4x5x_can_remove(): fix order of deregistration
` [net 12/15] can: m_can: m_can_handle_state_change(): fix state change
` [net 13/15] can: m_can: m_can_class_free_dev(): introduce new function
` [net 14/15] can: m_can: Fix freeing of can device from peripherials
` [net 15/15] can: m_can: m_can_stop(): set device to software init mode before closing
[PATCH 0/1] Add support for CAN_CTRLMODE_CC_LEN8_DLC to esd_usb2
2020-11-17 13:14 UTC (4+ messages)
` [PATCH 1/1] can: drivers: add len8_dlc support for esd_usb2 CAN adapter
[PATCH] can: mcp251xfd: remove useless code in mcp251xfd_chip_softreset
2020-11-17 10:05 UTC (2+ messages)
pull-request: can 2020-11-14
2020-11-16 15:33 UTC (21+ messages)
` [net 01/15] can: af_can: prevent potential access of uninitialized member in can_rcv()
` [net 02/15] can: af_can: prevent potential access of uninitialized member in canfd_rcv()
` [net 03/15] can: dev: can_restart(): post buffer from the right context
` [net 04/15] can: ti_hecc: Fix memleak in ti_hecc_probe
` [net 05/15] can: mcba_usb: mcba_usb_start_xmit(): first fill skb, then pass to can_put_echo_skb()
` [net 06/15] can: peak_usb: fix potential integer overflow on shift of a int
` [net 07/15] can: flexcan: flexcan_setup_stop_mode(): add missing "req_bit" to stop mode property comment
` [net 08/15] can: flexcan: fix failure handling of pm_runtime_get_sync()
` [net 09/15] can: tcan4x5x: replace depends on REGMAP_SPI with depends on SPI
` [net 10/15] can: tcan4x5x: tcan4x5x_can_probe(): add missing error checking for devm_regmap_init()
` [net 11/15] can: tcan4x5x: tcan4x5x_can_remove(): fix order of deregistration
` [net 12/15] can: m_can: m_can_handle_state_change(): fix state change
` [net 13/15] can: m_can: m_can_class_free_dev(): introduce new function
` [net 14/15] can: m_can: Fix freeing of can device from peripherials
` [net 15/15] can: m_can: m_can_stop(): set device to software init mode before closing
[PATCH v6] can: usb: etas_es58X: add support for ETAS ES58X CAN USB interfaces
2020-11-16 15:02 UTC (6+ messages)
` [kbuild-all] "
Corporate and Personal Loan::,
2020-11-13 10:31 UTC
pull-request: can 2020-11-11
2020-11-16 8:24 UTC (5+ messages)
` [net v2 1/4] ARM: dts: imx: fix can fsl,stop-mode
` [net v2 2/4] ARM: dts: imx: Change flexcan node name to "can"
[PATCH 1/6] can: kvaser_pciefd: Fix KCAN bittiming limits
2020-11-15 21:10 UTC (8+ messages)
` [PATCH 2/6] can: kvaser_usb: kvaser_usb_hydra: "
` [PATCH 3/6] can: kvaser_usb: Add USB_{LEAF,HYDRA}_PRODUCT_ID_END defines
` [PATCH 4/6] can: kvaser_usb: Add new Kvaser Leaf v2 devices
` [PATCH 5/6] can: kvaser_usb: kvaser_usb_hydra: Add support for new device variant
` [PATCH 6/6] can: kvaser_usb: Add new Kvaser hydra devices
Corporate and Personal Loan *
2020-11-15 16:43 UTC
[PATCH] can: ti_hecc: Fix memleak in ti_hecc_probe
2020-11-14 16:45 UTC (2+ messages)
[PATCH] dt-bindings: clock: imx5: fix example
2020-11-13 15:00 UTC (2+ messages)
[PATCH v2 00/16] Add support for CPC-USB/FD CAN FD interface
2020-11-12 18:03 UTC (15+ messages)
` [PATCH v2 02/16] can: ems_usb: Added CPC_ClearCmdQueue routine
` [PATCH v2 04/16] can: ems_usb: Added CAN FD message representation
` [PATCH v2 05/16] can: ems_usb: Added CAN FD initialization struct
` [PATCH v2 06/16] can: ems_usb: Made RX_BUFFER_SIZE, ems_usb_write_mode and ems_usb_probe device dependent
` [PATCH v2 07/16] can: ems_usb: Added listen only mode for CPC-USB/ARM7
` [PATCH v2 08/16] can: ems_usb: Modified ems_usb_read_bulk_callback to handle also CPC-USB/FD
` [PATCH v2 09/16] can: ems_usb: Added CAN controller initialization for CAN FD
` [PATCH v2 10/16] can: ems_usb: Added receive routine for CAN FD messages
` [PATCH v2 11/16] can: ems_usb: Added ems_usb_write_mode_fd
` [PATCH v2 12/16] can: ems_usb: Fixed ems_usb_start_xmit for CAN FD
` [PATCH v2 13/16] can: ems_usb: Made CAN error reporting CAN controller dependent
` [PATCH v2 14/16] can: ems_usb: Made structs packed
` [PATCH v2 15/16] can: ems_usb: Added error reporting for CPC-USB/FD
` [PATCH v2 16/16] can: ems_usb: Enable CPC-USB/FD support
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).