* [PATCH 00/22] ReST conversion of text files without .txt extension
@ 2019-07-22 11:07 Mauro Carvalho Chehab
2019-07-22 11:07 ` [PATCH 12/22] docs: fs: cifs: convert to ReST and add to admin-guide book Mauro Carvalho Chehab
2019-07-22 11:07 ` [PATCH 13/22] docs: fs: convert docs without extension to ReST Mauro Carvalho Chehab
0 siblings, 2 replies; 3+ messages in thread
From: Mauro Carvalho Chehab @ 2019-07-22 11:07 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, linux-spi, dmaengine, netdev, linux-wimax,
devel, linux-i2c, linux-parisc, devel, linux-cifs, rcu,
linux-iio, openrisc, Greg Kroah-Hartman, Jonathan Corbet,
linux-doc, alsa-devel, linux-wireless, linux-rtc, linux-mips
This series converts the text files under Documentation with doesn't end
neither .txt or .rst and are not part of ABI or features[1].
This series is at:
https://git.linuxtv.org/mchehab/experimental.git/log/?h=rst_for_5_4_v2.1
And comes after the pending patches I had for v5.13 (some not applied
yet):
https://git.linuxtv.org/mchehab/experimental.git/log/?h=pending_docs_after_5.13-rc1
[1] I submitted already a series to handle ABI and features.
There are some files besides the ones there with, IMHO, it
doesn't make sense to convert.
So, I wrote a small ugly script to track the files waiting to be
converted:
#!/bin/bash
find Documentation/ -name '*.txt'|grep -vE '(features/|devicetree/|sphinx/|output/|dax-hv-api.txt|draft-ietf-cipso-ipsecurity-01.txt|translations)'
for i in $(find Documentation/ -type f|grep -v translations/|grep -v output/|grep -v devicetree|grep -v -E "\.(rst|txt|py|pyc|pl|dot|conf|svg|sh|awk|gif|S|inf|c|csv|css|vim|exceptions|modes)$"|grep -v ABI/ |grep -v Documentation/EDID/hex|grep -v dontdiff|grep -v Kconfig|grep -v Makefile|grep -v Module.symvers|grep -vE '\b(CodingStyle|SubmittingPatches|target-export-device|hotplug-script|wusb-cbaf)\b'|grep -v -E '(LICENSE|COPY|gitignore|Makefile|AUTHORS|TODO|CHANGES|CREDITS|ChangeLog)'|grep -v Documentation/virtual/kvm/devices/README); do echo $i; done
After this patch series, the script reports 358 files missing conversion, all ending with .txt.
From those, ~40 files are already at ReST format - the ones at Documentation/*.txt - except
for a couple of files there.
So, there's around 320 files left to be converted after this series,
with gives me hope that we may finally finish the conversion this
year. Let's see.
Mauro Carvalho Chehab (22):
docs: convert markdown documents to ReST
docs: i2c: convert to ReST and add to driver-api bookset
docs: w1: convert to ReST and add to the kAPI group of docs
docs: spi: convert to ReST and add it to the kABI bookset
docs: ipmb: place it at driver-api and convert to ReST
docs: packing: move it to core-api book and adjust markups
docs: admin-guide: add auxdisplay files to it after conversion to ReST
docs: README.buddha: convert to ReST and add to m68k book
docs: parisc: convert to ReST and add to documentation body
docs: openrisc: convert to ReST and add to documentation body
docs: isdn: convert to ReST and add to kAPI bookset
docs: fs: cifs: convert to ReST and add to admin-guide book
docs: fs: convert docs without extension to ReST
docs: fs: convert porting to ReST
docs: index.rst: don't use genindex for pdf output
docs: wimax: convert to ReST and add to admin-guide
docs: mips: add to the documentation body as ReST
docs: hwmon: pxe1610: convert to ReST format and add to the index
docs: nios2: add it to the main Documentation body
docs: net: convert two README files to ReST format
docs: rcu: convert some articles from html to ReST
docs: ABI: remove extension from sysfs-class-mic.txt
Documentation/ABI/stable/sysfs-bus-w1 | 2 +-
.../ABI/stable/sysfs-driver-w1_ds28e04 | 4 +-
.../ABI/stable/sysfs-driver-w1_ds28ea00 | 2 +-
.../{sysfs-class-mic.txt => sysfs-class-mic} | 0
.../Data-Structures/Data-Structures.html | 1391 -------
.../Data-Structures/Data-Structures.rst | 1163 ++++++
.../Expedited-Grace-Periods.html | 668 ----
.../Expedited-Grace-Periods.rst | 521 +++
.../Memory-Ordering/Tree-RCU-Diagram.html | 9 -
.../Tree-RCU-Memory-Ordering.html | 704 ----
.../Tree-RCU-Memory-Ordering.rst | 625 ++++
.../RCU/Design/Requirements/Requirements.html | 3330 -----------------
.../RCU/Design/Requirements/Requirements.rst | 2662 +++++++++++++
Documentation/RCU/index.rst | 5 +
Documentation/RCU/whatisRCU.txt | 4 +-
.../admin-guide/auxdisplay/cfag12864b.rst | 98 +
.../admin-guide/auxdisplay/index.rst | 16 +
.../admin-guide/auxdisplay/ks0108.rst | 50 +
.../AUTHORS => admin-guide/cifs/authors.rst} | 64 +-
.../CHANGES => admin-guide/cifs/changes.rst} | 4 +
Documentation/admin-guide/cifs/index.rst | 21 +
.../cifs/introduction.rst} | 8 +
.../cifs/TODO => admin-guide/cifs/todo.rst} | 87 +-
.../README => admin-guide/cifs/usage.rst} | 560 +--
.../cifs/winucase_convert.pl | 0
Documentation/admin-guide/index.rst | 3 +
.../wimax/i2400m.rst} | 145 +-
Documentation/admin-guide/wimax/index.rst | 19 +
.../wimax/wimax.rst} | 36 +-
Documentation/auxdisplay/cfag12864b | 105 -
Documentation/auxdisplay/ks0108 | 55 -
Documentation/core-api/index.rst | 3 +-
.../{packing.txt => core-api/packing.rst} | 81 +-
.../devicetree/bindings/i2c/i2c-mux-gpmux.txt | 2 +-
Documentation/devicetree/writing-schema.md | 130 -
Documentation/devicetree/writing-schema.rst | 153 +
Documentation/driver-api/dmaengine/index.rst | 2 +-
Documentation/driver-api/index.rst | 1 +
Documentation/driver-api/ipmb.rst | 2 +-
Documentation/driver-api/soundwire/index.rst | 2 +-
...irectory-locking => directory-locking.rst} | 40 +-
Documentation/filesystems/index.rst | 4 +
.../filesystems/{Locking => locking.rst} | 257 +-
.../nfs/{Exporting => exporting.rst} | 31 +-
Documentation/filesystems/porting | 686 ----
Documentation/filesystems/porting.rst | 852 +++++
...entication.md => ubifs-authentication.rst} | 70 +-
Documentation/filesystems/vfs.rst | 2 +-
Documentation/hwmon/adm1021.rst | 2 +-
Documentation/hwmon/adm1275.rst | 2 +-
Documentation/hwmon/hih6130.rst | 2 +-
Documentation/hwmon/ibm-cffps.rst | 2 +-
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/lm25066.rst | 2 +-
Documentation/hwmon/max16064.rst | 2 +-
Documentation/hwmon/max16065.rst | 2 +-
Documentation/hwmon/max20751.rst | 2 +-
Documentation/hwmon/max34440.rst | 2 +-
Documentation/hwmon/max6650.rst | 2 +-
Documentation/hwmon/max8688.rst | 2 +-
Documentation/hwmon/menf21bmc.rst | 2 +-
Documentation/hwmon/pcf8591.rst | 2 +-
Documentation/hwmon/{pxe1610 => pxe1610.rst} | 33 +-
Documentation/hwmon/sht3x.rst | 2 +-
Documentation/hwmon/shtc1.rst | 2 +-
Documentation/hwmon/tmp103.rst | 2 +-
Documentation/hwmon/tps40422.rst | 2 +-
Documentation/hwmon/ucd9000.rst | 2 +-
Documentation/hwmon/ucd9200.rst | 2 +-
Documentation/hwmon/via686a.rst | 2 +-
Documentation/hwmon/zl6100.rst | 2 +-
.../busses/{i2c-ali1535 => i2c-ali1535.rst} | 13 +-
.../busses/{i2c-ali1563 => i2c-ali1563.rst} | 3 +
.../busses/{i2c-ali15x3 => i2c-ali15x3.rst} | 64 +-
Documentation/i2c/busses/i2c-amd-mp2 | 23 -
Documentation/i2c/busses/i2c-amd-mp2.rst | 25 +
.../i2c/busses/{i2c-amd756 => i2c-amd756.rst} | 8 +-
.../busses/{i2c-amd8111 => i2c-amd8111.rst} | 14 +-
.../{i2c-diolan-u2c => i2c-diolan-u2c.rst} | 3 +
.../i2c/busses/{i2c-i801 => i2c-i801.rst} | 33 +-
.../i2c/busses/{i2c-ismt => i2c-ismt.rst} | 20 +-
.../busses/{i2c-mlxcpld => i2c-mlxcpld.rst} | 6 +
.../busses/{i2c-nforce2 => i2c-nforce2.rst} | 33 +-
.../{i2c-nvidia-gpu => i2c-nvidia-gpu.rst} | 6 +-
.../i2c/busses/{i2c-ocores => i2c-ocores.rst} | 22 +-
Documentation/i2c/busses/i2c-parport | 178 -
...2c-parport-light => i2c-parport-light.rst} | 8 +-
Documentation/i2c/busses/i2c-parport.rst | 190 +
.../busses/{i2c-pca-isa => i2c-pca-isa.rst} | 9 +-
.../i2c/busses/{i2c-piix4 => i2c-piix4.rst} | 18 +-
.../busses/{i2c-sis5595 => i2c-sis5595.rst} | 19 +-
Documentation/i2c/busses/i2c-sis630 | 58 -
Documentation/i2c/busses/i2c-sis630.rst | 63 +
.../i2c/busses/{i2c-sis96x => i2c-sis96x.rst} | 31 +-
.../busses/{i2c-taos-evm => i2c-taos-evm.rst} | 8 +-
.../i2c/busses/{i2c-via => i2c-via.rst} | 28 +-
.../i2c/busses/{i2c-viapro => i2c-viapro.rst} | 12 +-
Documentation/i2c/busses/index.rst | 33 +
.../i2c/busses/{scx200_acb => scx200_acb.rst} | 9 +-
.../i2c/{dev-interface => dev-interface.rst} | 94 +-
...-considerations => dma-considerations.rst} | 0
.../i2c/{fault-codes => fault-codes.rst} | 5 +-
.../i2c/{functionality => functionality.rst} | 22 +-
...ult-injection => gpio-fault-injection.rst} | 12 +-
.../i2c/{i2c-protocol => i2c-protocol.rst} | 28 +-
Documentation/i2c/{i2c-stub => i2c-stub.rst} | 20 +-
.../i2c/{i2c-topology => i2c-topology.rst} | 68 +-
Documentation/i2c/index.rst | 37 +
...ting-devices => instantiating-devices.rst} | 45 +-
.../muxes/{i2c-mux-gpio => i2c-mux-gpio.rst} | 26 +-
...e-parameters => old-module-parameters.rst} | 27 +-
...eprom-backend => slave-eeprom-backend.rst} | 4 +-
.../{slave-interface => slave-interface.rst} | 33 +-
.../{smbus-protocol => smbus-protocol.rst} | 86 +-
Documentation/i2c/{summary => summary.rst} | 6 +-
...en-bit-addresses => ten-bit-addresses.rst} | 5 +
...pgrading-clients => upgrading-clients.rst} | 204 +-
.../{writing-clients => writing-clients.rst} | 94 +-
Documentation/index.rst | 8 +
.../isdn/{README.avmb1 => avmb1.rst} | 231 +-
Documentation/isdn/{CREDITS => credits.rst} | 7 +-
.../isdn/{README.gigaset => gigaset.rst} | 290 +-
.../isdn/{README.hysdn => hysdn.rst} | 125 +-
Documentation/isdn/index.rst | 24 +
.../{INTERFACE.CAPI => interface_capi.rst} | 182 +-
.../isdn/{README.mISDN => m_isdn.rst} | 5 +-
.../m68k/{README.buddha => buddha-driver.rst} | 95 +-
Documentation/m68k/index.rst | 1 +
.../{AU1xxx_IDE.README => au1xxx_ide.rst} | 89 +-
Documentation/mips/index.rst | 17 +
.../networking/caif/{README => caif.rst} | 88 +-
.../networking/device_drivers/index.rst | 2 +-
Documentation/networking/index.rst | 2 +-
.../{README => mac80211_hwsim.rst} | 28 +-
Documentation/nios2/{README => nios2.rst} | 1 +
Documentation/openrisc/index.rst | 18 +
.../openrisc/{README => openrisc_port.rst} | 25 +-
Documentation/openrisc/{TODO => todo.rst} | 9 +-
.../parisc/{debugging => debugging.rst} | 7 +
Documentation/parisc/index.rst | 18 +
.../parisc/{registers => registers.rst} | 59 +-
Documentation/sound/index.rst | 2 +-
.../spi/{butterfly => butterfly.rst} | 44 +-
Documentation/spi/index.rst | 22 +
Documentation/spi/{pxa2xx => pxa2xx.rst} | 95 +-
.../spi/{spi-lm70llp => spi-lm70llp.rst} | 17 +-
.../spi/{spi-sc18is602 => spi-sc18is602.rst} | 5 +-
.../spi/{spi-summary => spi-summary.rst} | 105 +-
Documentation/spi/{spidev => spidev.rst} | 30 +-
Documentation/w1/index.rst | 21 +
.../w1/masters/{ds2482 => ds2482.rst} | 16 +-
.../w1/masters/{ds2490 => ds2490.rst} | 6 +-
Documentation/w1/masters/index.rst | 14 +
Documentation/w1/masters/mxc-w1 | 12 -
Documentation/w1/masters/mxc-w1.rst | 17 +
.../w1/masters/{omap-hdq => omap-hdq.rst} | 12 +-
.../w1/masters/{w1-gpio => w1-gpio.rst} | 21 +-
Documentation/w1/slaves/index.rst | 16 +
.../w1/slaves/{w1_ds2406 => w1_ds2406.rst} | 4 +-
.../w1/slaves/{w1_ds2413 => w1_ds2413.rst} | 9 +
Documentation/w1/slaves/w1_ds2423 | 47 -
Documentation/w1/slaves/w1_ds2423.rst | 54 +
.../w1/slaves/{w1_ds2438 => w1_ds2438.rst} | 10 +-
.../w1/slaves/{w1_ds28e04 => w1_ds28e04.rst} | 5 +
.../w1/slaves/{w1_ds28e17 => w1_ds28e17.rst} | 16 +-
.../w1/slaves/{w1_therm => w1_therm.rst} | 11 +-
.../w1/{w1.generic => w1-generic.rst} | 88 +-
.../w1/{w1.netlink => w1-netlink.rst} | 89 +-
MAINTAINERS | 60 +-
drivers/auxdisplay/Kconfig | 2 +-
drivers/hwmon/atxp1.c | 2 +-
drivers/hwmon/smm665.c | 2 +-
drivers/i2c/Kconfig | 4 +-
drivers/i2c/busses/Kconfig | 2 +-
drivers/i2c/busses/i2c-i801.c | 2 +-
drivers/i2c/busses/i2c-taos-evm.c | 2 +-
drivers/i2c/i2c-core-base.c | 4 +-
drivers/iio/dummy/iio_simple_dummy.c | 4 +-
drivers/rtc/rtc-ds1374.c | 2 +-
drivers/spi/Kconfig | 2 +-
drivers/spi/spi-butterfly.c | 2 +-
drivers/spi/spi-lm70llp.c | 2 +-
drivers/staging/isdn/hysdn/Kconfig | 2 +-
fs/cifs/export.c | 2 +-
fs/exportfs/expfs.c | 2 +-
fs/isofs/export.c | 2 +-
fs/orangefs/file.c | 2 +-
fs/orangefs/orangefs-kernel.h | 2 +-
include/linux/dcache.h | 2 +-
include/linux/exportfs.h | 2 +-
include/linux/i2c.h | 2 +-
include/linux/platform_data/sc18is602.h | 2 +-
192 files changed, 9538 insertions(+), 9201 deletions(-)
rename Documentation/ABI/testing/{sysfs-class-mic.txt => sysfs-class-mic} (100%)
delete mode 100644 Documentation/RCU/Design/Data-Structures/Data-Structures.html
create mode 100644 Documentation/RCU/Design/Data-Structures/Data-Structures.rst
delete mode 100644 Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html
create mode 100644 Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst
delete mode 100644 Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Diagram.html
delete mode 100644 Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html
create mode 100644 Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
delete mode 100644 Documentation/RCU/Design/Requirements/Requirements.html
create mode 100644 Documentation/RCU/Design/Requirements/Requirements.rst
create mode 100644 Documentation/admin-guide/auxdisplay/cfag12864b.rst
create mode 100644 Documentation/admin-guide/auxdisplay/index.rst
create mode 100644 Documentation/admin-guide/auxdisplay/ks0108.rst
rename Documentation/{filesystems/cifs/AUTHORS => admin-guide/cifs/authors.rst} (60%)
rename Documentation/{filesystems/cifs/CHANGES => admin-guide/cifs/changes.rst} (91%)
create mode 100644 Documentation/admin-guide/cifs/index.rst
rename Documentation/{filesystems/cifs/cifs.txt => admin-guide/cifs/introduction.rst} (98%)
rename Documentation/{filesystems/cifs/TODO => admin-guide/cifs/todo.rst} (58%)
rename Documentation/{filesystems/cifs/README => admin-guide/cifs/usage.rst} (72%)
rename Documentation/{filesystems => admin-guide}/cifs/winucase_convert.pl (100%)
rename Documentation/{wimax/README.i2400m => admin-guide/wimax/i2400m.rst} (69%)
create mode 100644 Documentation/admin-guide/wimax/index.rst
rename Documentation/{wimax/README.wimax => admin-guide/wimax/wimax.rst} (74%)
delete mode 100644 Documentation/auxdisplay/cfag12864b
delete mode 100644 Documentation/auxdisplay/ks0108
rename Documentation/{packing.txt => core-api/packing.rst} (61%)
delete mode 100644 Documentation/devicetree/writing-schema.md
create mode 100644 Documentation/devicetree/writing-schema.rst
rename Documentation/filesystems/{directory-locking => directory-locking.rst} (86%)
rename Documentation/filesystems/{Locking => locking.rst} (79%)
rename Documentation/filesystems/nfs/{Exporting => exporting.rst} (91%)
delete mode 100644 Documentation/filesystems/porting
create mode 100644 Documentation/filesystems/porting.rst
rename Documentation/filesystems/{ubifs-authentication.md => ubifs-authentication.rst} (95%)
rename Documentation/hwmon/{pxe1610 => pxe1610.rst} (82%)
rename Documentation/i2c/busses/{i2c-ali1535 => i2c-ali1535.rst} (82%)
rename Documentation/i2c/busses/{i2c-ali1563 => i2c-ali1563.rst} (93%)
rename Documentation/i2c/busses/{i2c-ali15x3 => i2c-ali15x3.rst} (72%)
delete mode 100644 Documentation/i2c/busses/i2c-amd-mp2
create mode 100644 Documentation/i2c/busses/i2c-amd-mp2.rst
rename Documentation/i2c/busses/{i2c-amd756 => i2c-amd756.rst} (79%)
rename Documentation/i2c/busses/{i2c-amd8111 => i2c-amd8111.rst} (66%)
rename Documentation/i2c/busses/{i2c-diolan-u2c => i2c-diolan-u2c.rst} (91%)
rename Documentation/i2c/busses/{i2c-i801 => i2c-i801.rst} (89%)
rename Documentation/i2c/busses/{i2c-ismt => i2c-ismt.rst} (81%)
rename Documentation/i2c/busses/{i2c-mlxcpld => i2c-mlxcpld.rst} (88%)
rename Documentation/i2c/busses/{i2c-nforce2 => i2c-nforce2.rst} (58%)
rename Documentation/i2c/busses/{i2c-nvidia-gpu => i2c-nvidia-gpu.rst} (63%)
rename Documentation/i2c/busses/{i2c-ocores => i2c-ocores.rst} (82%)
delete mode 100644 Documentation/i2c/busses/i2c-parport
rename Documentation/i2c/busses/{i2c-parport-light => i2c-parport-light.rst} (91%)
create mode 100644 Documentation/i2c/busses/i2c-parport.rst
rename Documentation/i2c/busses/{i2c-pca-isa => i2c-pca-isa.rst} (72%)
rename Documentation/i2c/busses/{i2c-piix4 => i2c-piix4.rst} (92%)
rename Documentation/i2c/busses/{i2c-sis5595 => i2c-sis5595.rst} (74%)
delete mode 100644 Documentation/i2c/busses/i2c-sis630
create mode 100644 Documentation/i2c/busses/i2c-sis630.rst
rename Documentation/i2c/busses/{i2c-sis96x => i2c-sis96x.rst} (74%)
rename Documentation/i2c/busses/{i2c-taos-evm => i2c-taos-evm.rst} (91%)
rename Documentation/i2c/busses/{i2c-via => i2c-via.rst} (54%)
rename Documentation/i2c/busses/{i2c-viapro => i2c-viapro.rst} (87%)
create mode 100644 Documentation/i2c/busses/index.rst
rename Documentation/i2c/busses/{scx200_acb => scx200_acb.rst} (86%)
rename Documentation/i2c/{dev-interface => dev-interface.rst} (71%)
rename Documentation/i2c/{DMA-considerations => dma-considerations.rst} (100%)
rename Documentation/i2c/{fault-codes => fault-codes.rst} (98%)
rename Documentation/i2c/{functionality => functionality.rst} (91%)
rename Documentation/i2c/{gpio-fault-injection => gpio-fault-injection.rst} (97%)
rename Documentation/i2c/{i2c-protocol => i2c-protocol.rst} (83%)
rename Documentation/i2c/{i2c-stub => i2c-stub.rst} (93%)
rename Documentation/i2c/{i2c-topology => i2c-topology.rst} (89%)
create mode 100644 Documentation/i2c/index.rst
rename Documentation/i2c/{instantiating-devices => instantiating-devices.rst} (93%)
rename Documentation/i2c/muxes/{i2c-mux-gpio => i2c-mux-gpio.rst} (85%)
rename Documentation/i2c/{old-module-parameters => old-module-parameters.rst} (75%)
rename Documentation/i2c/{slave-eeprom-backend => slave-eeprom-backend.rst} (90%)
rename Documentation/i2c/{slave-interface => slave-interface.rst} (94%)
rename Documentation/i2c/{smbus-protocol => smbus-protocol.rst} (82%)
rename Documentation/i2c/{summary => summary.rst} (96%)
rename Documentation/i2c/{ten-bit-addresses => ten-bit-addresses.rst} (95%)
rename Documentation/i2c/{upgrading-clients => upgrading-clients.rst} (54%)
rename Documentation/i2c/{writing-clients => writing-clients.rst} (91%)
rename Documentation/isdn/{README.avmb1 => avmb1.rst} (50%)
rename Documentation/isdn/{CREDITS => credits.rst} (96%)
rename Documentation/isdn/{README.gigaset => gigaset.rst} (74%)
rename Documentation/isdn/{README.hysdn => hysdn.rst} (80%)
create mode 100644 Documentation/isdn/index.rst
rename Documentation/isdn/{INTERFACE.CAPI => interface_capi.rst} (75%)
rename Documentation/isdn/{README.mISDN => m_isdn.rst} (89%)
rename Documentation/m68k/{README.buddha => buddha-driver.rst} (73%)
rename Documentation/mips/{AU1xxx_IDE.README => au1xxx_ide.rst} (67%)
create mode 100644 Documentation/mips/index.rst
rename Documentation/networking/caif/{README => caif.rst} (70%)
rename Documentation/networking/mac80211_hwsim/{README => mac80211_hwsim.rst} (81%)
rename Documentation/nios2/{README => nios2.rst} (96%)
create mode 100644 Documentation/openrisc/index.rst
rename Documentation/openrisc/{README => openrisc_port.rst} (80%)
rename Documentation/openrisc/{TODO => todo.rst} (78%)
rename Documentation/parisc/{debugging => debugging.rst} (94%)
create mode 100644 Documentation/parisc/index.rst
rename Documentation/parisc/{registers => registers.rst} (70%)
rename Documentation/spi/{butterfly => butterfly.rst} (71%)
create mode 100644 Documentation/spi/index.rst
rename Documentation/spi/{pxa2xx => pxa2xx.rst} (83%)
rename Documentation/spi/{spi-lm70llp => spi-lm70llp.rst} (88%)
rename Documentation/spi/{spi-sc18is602 => spi-sc18is602.rst} (92%)
rename Documentation/spi/{spi-summary => spi-summary.rst} (93%)
rename Documentation/spi/{spidev => spidev.rst} (90%)
create mode 100644 Documentation/w1/index.rst
rename Documentation/w1/masters/{ds2482 => ds2482.rst} (71%)
rename Documentation/w1/masters/{ds2490 => ds2490.rst} (98%)
create mode 100644 Documentation/w1/masters/index.rst
delete mode 100644 Documentation/w1/masters/mxc-w1
create mode 100644 Documentation/w1/masters/mxc-w1.rst
rename Documentation/w1/masters/{omap-hdq => omap-hdq.rst} (90%)
rename Documentation/w1/masters/{w1-gpio => w1-gpio.rst} (75%)
create mode 100644 Documentation/w1/slaves/index.rst
rename Documentation/w1/slaves/{w1_ds2406 => w1_ds2406.rst} (96%)
rename Documentation/w1/slaves/{w1_ds2413 => w1_ds2413.rst} (81%)
delete mode 100644 Documentation/w1/slaves/w1_ds2423
create mode 100644 Documentation/w1/slaves/w1_ds2423.rst
rename Documentation/w1/slaves/{w1_ds2438 => w1_ds2438.rst} (93%)
rename Documentation/w1/slaves/{w1_ds28e04 => w1_ds28e04.rst} (93%)
rename Documentation/w1/slaves/{w1_ds28e17 => w1_ds28e17.rst} (88%)
rename Documentation/w1/slaves/{w1_therm => w1_therm.rst} (95%)
rename Documentation/w1/{w1.generic => w1-generic.rst} (59%)
rename Documentation/w1/{w1.netlink => w1-netlink.rst} (77%)
--
2.21.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH 12/22] docs: fs: cifs: convert to ReST and add to admin-guide book
2019-07-22 11:07 [PATCH 00/22] ReST conversion of text files without .txt extension Mauro Carvalho Chehab
@ 2019-07-22 11:07 ` Mauro Carvalho Chehab
2019-07-22 11:07 ` [PATCH 13/22] docs: fs: convert docs without extension to ReST Mauro Carvalho Chehab
1 sibling, 0 replies; 3+ messages in thread
From: Mauro Carvalho Chehab @ 2019-07-22 11:07 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Steve French, Jonathan Corbet, linux-cifs,
samba-technical, linux-doc
The filenames for cifs documentation is not using the same
convention as almost all Kernel documents is using. So,
rename them to a more appropriate name. Then, manually convert
the documentation files for CIFS to ReST.
By doing a manual conversion, we can preserve the original
author's style, while making it to look more like the other
Kernel documents.
Most of the conversion here is trivial. The most complex one was
the README file (which was renamed to usage.rst).
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
.../AUTHORS => admin-guide/cifs/authors.rst} | 64 +-
.../CHANGES => admin-guide/cifs/changes.rst} | 4 +
Documentation/admin-guide/cifs/index.rst | 21 +
.../cifs/introduction.rst} | 8 +
.../cifs/TODO => admin-guide/cifs/todo.rst} | 87 +--
.../README => admin-guide/cifs/usage.rst} | 560 +++++++++++-------
.../cifs/winucase_convert.pl | 0
Documentation/admin-guide/index.rst | 1 +
MAINTAINERS | 2 +-
9 files changed, 460 insertions(+), 287 deletions(-)
rename Documentation/{filesystems/cifs/AUTHORS => admin-guide/cifs/authors.rst} (60%)
rename Documentation/{filesystems/cifs/CHANGES => admin-guide/cifs/changes.rst} (91%)
create mode 100644 Documentation/admin-guide/cifs/index.rst
rename Documentation/{filesystems/cifs/cifs.txt => admin-guide/cifs/introduction.rst} (98%)
rename Documentation/{filesystems/cifs/TODO => admin-guide/cifs/todo.rst} (58%)
rename Documentation/{filesystems/cifs/README => admin-guide/cifs/usage.rst} (72%)
rename Documentation/{filesystems => admin-guide}/cifs/winucase_convert.pl (100%)
diff --git a/Documentation/filesystems/cifs/AUTHORS b/Documentation/admin-guide/cifs/authors.rst
similarity index 60%
rename from Documentation/filesystems/cifs/AUTHORS
rename to Documentation/admin-guide/cifs/authors.rst
index 75865da2ce14..b02d6dd6c070 100644
--- a/Documentation/filesystems/cifs/AUTHORS
+++ b/Documentation/admin-guide/cifs/authors.rst
@@ -1,5 +1,10 @@
+=======
+Authors
+=======
+
Original Author
-===============
+---------------
+
Steve French (sfrench@samba.org)
The author wishes to express his appreciation and thanks to:
@@ -12,7 +17,7 @@ side of the original CIFS Unix extensions and reviewing and implementing
portions of the newer CIFS POSIX extensions into the Samba 3 file server. Thank
Dave Boutcher of IBM Rochester (author of the OS/400 smb/cifs filesystem client)
for proving years ago that very good smb/cifs clients could be done on Unix-like
-operating systems. Volker Lendecke, Andrew Tridgell, Urban Widmark, John
+operating systems. Volker Lendecke, Andrew Tridgell, Urban Widmark, John
Newbigin and others for their work on the Linux smbfs module. Thanks to
the other members of the Storage Network Industry Association CIFS Technical
Workgroup for their work specifying this highly complex protocol and finally
@@ -20,33 +25,34 @@ thanks to the Samba team for their technical advice and encouragement.
Patch Contributors
------------------
-Zwane Mwaikambo
-Andi Kleen
-Amrut Joshi
-Shobhit Dayal
-Sergey Vlasov
-Richard Hughes
-Yury Umanets
-Mark Hamzy (for some of the early cifs IPv6 work)
-Domen Puncer
-Jesper Juhl (in particular for lots of whitespace/formatting cleanup)
-Vince Negri and Dave Stahl (for finding an important caching bug)
-Adrian Bunk (kcalloc cleanups)
-Miklos Szeredi
-Kazeon team for various fixes especially for 2.4 version.
-Asser Ferno (Change Notify support)
-Shaggy (Dave Kleikamp) for innumerable small fs suggestions and some good cleanup
-Gunter Kukkukk (testing and suggestions for support of old servers)
-Igor Mammedov (DFS support)
-Jeff Layton (many, many fixes, as well as great work on the cifs Kerberos code)
-Scott Lovenberg
-Pavel Shilovsky (for great work adding SMB2 support, and various SMB3 features)
-Aurelien Aptel (for DFS SMB3 work and some key bug fixes)
-Ronnie Sahlberg (for SMB3 xattr work, bug fixes, and lots of great work on compounding)
-Shirish Pargaonkar (for many ACL patches over the years)
-Sachin Prabhu (many bug fixes, including for reconnect, copy offload and security)
-Paulo Alcantara
-Long Li (some great work on RDMA, SMB Direct)
+
+- Zwane Mwaikambo
+- Andi Kleen
+- Amrut Joshi
+- Shobhit Dayal
+- Sergey Vlasov
+- Richard Hughes
+- Yury Umanets
+- Mark Hamzy (for some of the early cifs IPv6 work)
+- Domen Puncer
+- Jesper Juhl (in particular for lots of whitespace/formatting cleanup)
+- Vince Negri and Dave Stahl (for finding an important caching bug)
+- Adrian Bunk (kcalloc cleanups)
+- Miklos Szeredi
+- Kazeon team for various fixes especially for 2.4 version.
+- Asser Ferno (Change Notify support)
+- Shaggy (Dave Kleikamp) for innumerable small fs suggestions and some good cleanup
+- Gunter Kukkukk (testing and suggestions for support of old servers)
+- Igor Mammedov (DFS support)
+- Jeff Layton (many, many fixes, as well as great work on the cifs Kerberos code)
+- Scott Lovenberg
+- Pavel Shilovsky (for great work adding SMB2 support, and various SMB3 features)
+- Aurelien Aptel (for DFS SMB3 work and some key bug fixes)
+- Ronnie Sahlberg (for SMB3 xattr work, bug fixes, and lots of great work on compounding)
+- Shirish Pargaonkar (for many ACL patches over the years)
+- Sachin Prabhu (many bug fixes, including for reconnect, copy offload and security)
+- Paulo Alcantara
+- Long Li (some great work on RDMA, SMB Direct)
Test case and Bug Report contributors
diff --git a/Documentation/filesystems/cifs/CHANGES b/Documentation/admin-guide/cifs/changes.rst
similarity index 91%
rename from Documentation/filesystems/cifs/CHANGES
rename to Documentation/admin-guide/cifs/changes.rst
index 1df7f4910eb2..71f2ecb62299 100644
--- a/Documentation/filesystems/cifs/CHANGES
+++ b/Documentation/admin-guide/cifs/changes.rst
@@ -1,3 +1,7 @@
+=======
+Changes
+=======
+
See https://wiki.samba.org/index.php/LinuxCIFSKernel for summary
information (that may be easier to read than parsing the output of
"git log fs/cifs") about fixes/improvements to CIFS/SMB2/SMB3 support (changes
diff --git a/Documentation/admin-guide/cifs/index.rst b/Documentation/admin-guide/cifs/index.rst
new file mode 100644
index 000000000000..fad5268635f5
--- /dev/null
+++ b/Documentation/admin-guide/cifs/index.rst
@@ -0,0 +1,21 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====
+CIFS
+====
+
+.. toctree::
+ :maxdepth: 2
+
+ introduction
+ usage
+ todo
+ changes
+ authors
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/filesystems/cifs/cifs.txt b/Documentation/admin-guide/cifs/introduction.rst
similarity index 98%
rename from Documentation/filesystems/cifs/cifs.txt
rename to Documentation/admin-guide/cifs/introduction.rst
index 1be3d21c286e..0b98f672d36f 100644
--- a/Documentation/filesystems/cifs/cifs.txt
+++ b/Documentation/admin-guide/cifs/introduction.rst
@@ -1,3 +1,7 @@
+============
+Introduction
+============
+
This is the client VFS module for the SMB3 NAS protocol as well
as for older dialects such as the Common Internet File System (CIFS)
protocol which was the successor to the Server Message Block
@@ -33,7 +37,9 @@
tools (including smbinfo and setcifsacl) that can be obtained from
https://git.samba.org/?p=cifs-utils.git
+
or
+
git://git.samba.org/cifs-utils.git
mount.cifs should be installed in the directory with the other mount helpers.
@@ -41,5 +47,7 @@
For more information on the module see the project wiki page at
https://wiki.samba.org/index.php/LinuxCIFS
+
and
+
https://wiki.samba.org/index.php/LinuxCIFS_utils
diff --git a/Documentation/filesystems/cifs/TODO b/Documentation/admin-guide/cifs/todo.rst
similarity index 58%
rename from Documentation/filesystems/cifs/TODO
rename to Documentation/admin-guide/cifs/todo.rst
index 9267f3fb131f..95f18e8c9b8a 100644
--- a/Documentation/filesystems/cifs/TODO
+++ b/Documentation/admin-guide/cifs/todo.rst
@@ -1,3 +1,7 @@
+====
+TODO
+====
+
Version 2.14 December 21, 2018
A Partial List of Missing Features
@@ -8,6 +12,7 @@ for visible, important contributions to this module. Here
is a partial list of the known problems and missing features:
a) SMB3 (and SMB3.1.1) missing optional features:
+
- multichannel (started), integration with RDMA
- directory leases (improved metadata caching), started (root dir only)
- T10 copy offload ie "ODX" (copy chunk, and "Duplicate Extents" ioctl
@@ -16,45 +21,46 @@ a) SMB3 (and SMB3.1.1) missing optional features:
b) improved sparse file support
c) Directory entry caching relies on a 1 second timer, rather than
-using Directory Leases, currently only the root file handle is cached longer
+ using Directory Leases, currently only the root file handle is cached longer
d) quota support (needs minor kernel change since quota calls
-to make it to network filesystems or deviceless filesystems)
+ to make it to network filesystems or deviceless filesystems)
e) Additional use cases where we use "compoounding" (e.g. open/query/close
-and open/setinfo/close) to reduce the number of roundtrips, and also
-open to reduce redundant opens (using deferred close and reference counts more).
+ and open/setinfo/close) to reduce the number of roundtrips, and also
+ open to reduce redundant opens (using deferred close and reference counts
+ more).
f) Finish inotify support so kde and gnome file list windows
-will autorefresh (partially complete by Asser). Needs minor kernel
-vfs change to support removing D_NOTIFY on a file.
+ will autorefresh (partially complete by Asser). Needs minor kernel
+ vfs change to support removing D_NOTIFY on a file.
g) Add GUI tool to configure /proc/fs/cifs settings and for display of
-the CIFS statistics (started)
+ the CIFS statistics (started)
h) implement support for security and trusted categories of xattrs
-(requires minor protocol extension) to enable better support for SELINUX
+ (requires minor protocol extension) to enable better support for SELINUX
i) Add support for tree connect contexts (see MS-SMB2) a new SMB3.1.1 protocol
feature (may be especially useful for virtualization).
j) Create UID mapping facility so server UIDs can be mapped on a per
-mount or a per server basis to client UIDs or nobody if no mapping
-exists. Also better integration with winbind for resolving SID owners
+ mount or a per server basis to client UIDs or nobody if no mapping
+ exists. Also better integration with winbind for resolving SID owners
k) Add tools to take advantage of more smb3 specific ioctls and features
-(passthrough ioctl/fsctl for sending various SMB3 fsctls to the server
-is in progress, and a passthrough query_info call is already implemented
-in cifs.ko to allow smb3 info levels queries to be sent from userspace)
+ (passthrough ioctl/fsctl for sending various SMB3 fsctls to the server
+ is in progress, and a passthrough query_info call is already implemented
+ in cifs.ko to allow smb3 info levels queries to be sent from userspace)
l) encrypted file support
m) improved stats gathering tools (perhaps integration with nfsometer?)
-to extend and make easier to use what is currently in /proc/fs/cifs/Stats
+ to extend and make easier to use what is currently in /proc/fs/cifs/Stats
-n) allow setting more NTFS/SMB3 file attributes remotely (currently limited to compressed
-file attribute via chflags) and improve user space tools for managing and
-viewing them.
+n) allow setting more NTFS/SMB3 file attributes remotely (currently limited to
+ compressed file attribute via chflags) and improve user space tools for
+ managing and viewing them.
o) mount helper GUI (to simplify the various configuration options on mount)
@@ -65,55 +71,56 @@ p) Add support for witness protocol (perhaps ioctl to cifs.ko from user space
different servers, and the server we are connected to has gone down.
q) Allow mount.cifs to be more verbose in reporting errors with dialect
-or unsupported feature errors.
+ or unsupported feature errors.
r) updating cifs documentation, and user guide.
s) Addressing bugs found by running a broader set of xfstests in standard
-file system xfstest suite.
+ file system xfstest suite.
t) split cifs and smb3 support into separate modules so legacy (and less
-secure) CIFS dialect can be disabled in environments that don't need it
-and simplify the code.
+ secure) CIFS dialect can be disabled in environments that don't need it
+ and simplify the code.
v) POSIX Extensions for SMB3.1.1 (started, create and mkdir support added
-so far).
+ so far).
w) Add support for additional strong encryption types, and additional spnego
-authentication mechanisms (see MS-SMB2)
+ authentication mechanisms (see MS-SMB2)
+
+Known Bugs
+==========
-KNOWN BUGS
-====================================
See http://bugzilla.samba.org - search on product "CifsVFS" for
current bug list. Also check http://bugzilla.kernel.org (Product = File System, Component = CIFS)
1) existing symbolic links (Windows reparse points) are recognized but
-can not be created remotely. They are implemented for Samba and those that
-support the CIFS Unix extensions, although earlier versions of Samba
-overly restrict the pathnames.
+ can not be created remotely. They are implemented for Samba and those that
+ support the CIFS Unix extensions, although earlier versions of Samba
+ overly restrict the pathnames.
2) follow_link and readdir code does not follow dfs junctions
-but recognizes them
+ but recognizes them
Misc testing to do
==================
1) check out max path names and max path name components against various server
-types. Try nested symlinks (8 deep). Return max path name in stat -f information
+ types. Try nested symlinks (8 deep). Return max path name in stat -f information
2) Improve xfstest's cifs/smb3 enablement and adapt xfstests where needed to test
-cifs/smb3 better
+ cifs/smb3 better
-3) Additional performance testing and optimization using iozone and similar -
-there are some easy changes that can be done to parallelize sequential writes,
-and when signing is disabled to request larger read sizes (larger than
-negotiated size) and send larger write sizes to modern servers.
+3) Additional performance testing and optimization using iozone and similar -
+ there are some easy changes that can be done to parallelize sequential writes,
+ and when signing is disabled to request larger read sizes (larger than
+ negotiated size) and send larger write sizes to modern servers.
4) More exhaustively test against less common servers
5) Continue to extend the smb3 "buildbot" which does automated xfstesting
-against Windows, Samba and Azure currently - to add additional tests and
-to allow the buildbot to execute the tests faster. The URL for the
-buildbot is: http://smb3-test-rhel-75.southcentralus.cloudapp.azure.com
+ against Windows, Samba and Azure currently - to add additional tests and
+ to allow the buildbot to execute the tests faster. The URL for the
+ buildbot is: http://smb3-test-rhel-75.southcentralus.cloudapp.azure.com
6) Address various coverity warnings (most are not bugs per-se, but
-the more warnings are addressed, the easier it is to spot real
-problems that static analyzers will point out in the future).
+ the more warnings are addressed, the easier it is to spot real
+ problems that static analyzers will point out in the future).
diff --git a/Documentation/filesystems/cifs/README b/Documentation/admin-guide/cifs/usage.rst
similarity index 72%
rename from Documentation/filesystems/cifs/README
rename to Documentation/admin-guide/cifs/usage.rst
index 4a804619cff2..d3fb67b8a976 100644
--- a/Documentation/filesystems/cifs/README
+++ b/Documentation/admin-guide/cifs/usage.rst
@@ -1,53 +1,61 @@
+=====
+Usage
+=====
+
This module supports the SMB3 family of advanced network protocols (as well
as older dialects, originally called "CIFS" or SMB1).
The CIFS VFS module for Linux supports many advanced network filesystem
features such as hierarchical DFS like namespace, hardlinks, locking and more.
-It was designed to comply with the SNIA CIFS Technical Reference (which
-supersedes the 1992 X/Open SMB Standard) as well as to perform best practice
-practical interoperability with Windows 2000, Windows XP, Samba and equivalent
+It was designed to comply with the SNIA CIFS Technical Reference (which
+supersedes the 1992 X/Open SMB Standard) as well as to perform best practice
+practical interoperability with Windows 2000, Windows XP, Samba and equivalent
servers. This code was developed in participation with the Protocol Freedom
Information Foundation. CIFS and now SMB3 has now become a defacto
standard for interoperating between Macs and Windows and major NAS appliances.
Please see
- MS-SMB2 (for detailed SMB2/SMB3/SMB3.1.1 protocol specification)
- http://protocolfreedom.org/ and
- http://samba.org/samba/PFIF/
+MS-SMB2 (for detailed SMB2/SMB3/SMB3.1.1 protocol specification)
+http://protocolfreedom.org/ and
+http://samba.org/samba/PFIF/
for more details.
For questions or bug reports please contact:
+
smfrench@gmail.com
See the project page at: https://wiki.samba.org/index.php/LinuxCIFS_utils
-Build instructions:
+Build instructions
==================
+
For Linux:
+
1) Download the kernel (e.g. from http://www.kernel.org)
-and change directory into the top of the kernel directory tree
-(e.g. /usr/src/linux-2.5.73)
+ and change directory into the top of the kernel directory tree
+ (e.g. /usr/src/linux-2.5.73)
2) make menuconfig (or make xconfig)
3) select cifs from within the network filesystem choices
4) save and exit
5) make
-Installation instructions:
+Installation instructions
=========================
+
If you have built the CIFS vfs as module (successfully) simply
-type "make modules_install" (or if you prefer, manually copy the file to
+type ``make modules_install`` (or if you prefer, manually copy the file to
the modules directory e.g. /lib/modules/2.4.10-4GB/kernel/fs/cifs/cifs.ko).
If you have built the CIFS vfs into the kernel itself, follow the instructions
for your distribution on how to install a new kernel (usually you
-would simply type "make install").
+would simply type ``make install``).
If you do not have the utility mount.cifs (in the Samba 4.x source tree and on
the CIFS VFS web site) copy it to the same directory in which mount helpers
reside (usually /sbin). Although the helper software is not
-required, mount.cifs is recommended. Most distros include a "cifs-utils"
+required, mount.cifs is recommended. Most distros include a ``cifs-utils``
package that includes this utility so it is recommended to install this.
Note that running the Winbind pam/nss module (logon service) on all of your
@@ -57,13 +65,16 @@ found at cifs-utils.git on git.samba.org
If cifs is built as a module, then the size and number of network buffers
and maximum number of simultaneous requests to one server can be configured.
-Changing these from their defaults is not recommended. By executing modinfo
+Changing these from their defaults is not recommended. By executing modinfo::
+
modinfo kernel/fs/cifs/cifs.ko
+
on kernel/fs/cifs/cifs.ko the list of configuration changes that can be made
at module initialization time (by running insmod cifs.ko) can be seen.
Recommendations
===============
+
To improve security the SMB2.1 dialect or later (usually will get SMB3) is now
the new default. To use old dialects (e.g. to mount Windows XP) use "vers=1.0"
on mount (or vers=2.0 for Windows Vista). Note that the CIFS (vers=1.0) is
@@ -72,156 +83,168 @@ many advanced security features such as downgrade attack detection
and encrypted shares and stronger signing and authentication algorithms.
There are additional mount options that may be helpful for SMB3 to get
improved POSIX behavior (NB: can use vers=3.0 to force only SMB3, never 2.1):
- "mfsymlinks" and "cifsacl" and "idsfromsid"
+
+ ``mfsymlinks`` and ``cifsacl`` and ``idsfromsid``
Allowing User Mounts
====================
+
To permit users to mount and unmount over directories they own is possible
with the cifs vfs. A way to enable such mounting is to mark the mount.cifs
-utility as suid (e.g. "chmod +s /sbin/mount.cifs). To enable users to
+utility as suid (e.g. ``chmod +s /sbin/mount.cifs``). To enable users to
umount shares they mount requires
+
1) mount.cifs version 1.4 or later
2) an entry for the share in /etc/fstab indicating that a user may
-unmount it e.g.
-//server/usersharename /mnt/username cifs user 0 0
+ unmount it e.g.::
-Note that when the mount.cifs utility is run suid (allowing user mounts),
-in order to reduce risks, the "nosuid" mount flag is passed in on mount to
+ //server/usersharename /mnt/username cifs user 0 0
+
+Note that when the mount.cifs utility is run suid (allowing user mounts),
+in order to reduce risks, the ``nosuid`` mount flag is passed in on mount to
disallow execution of an suid program mounted on the remote target.
When mount is executed as root, nosuid is not passed in by default,
and execution of suid programs on the remote target would be enabled
-by default. This can be changed, as with nfs and other filesystems,
-by simply specifying "nosuid" among the mount options. For user mounts
-though to be able to pass the suid flag to mount requires rebuilding
+by default. This can be changed, as with nfs and other filesystems,
+by simply specifying ``nosuid`` among the mount options. For user mounts
+though to be able to pass the suid flag to mount requires rebuilding
mount.cifs with the following flag: CIFS_ALLOW_USR_SUID
There is a corresponding manual page for cifs mounting in the Samba 3.0 and
-later source tree in docs/manpages/mount.cifs.8
+later source tree in docs/manpages/mount.cifs.8
Allowing User Unmounts
======================
+
To permit users to ummount directories that they have user mounted (see above),
-the utility umount.cifs may be used. It may be invoked directly, or if
+the utility umount.cifs may be used. It may be invoked directly, or if
umount.cifs is placed in /sbin, umount can invoke the cifs umount helper
(at least for most versions of the umount utility) for umount of cifs
mounts, unless umount is invoked with -i (which will avoid invoking a umount
helper). As with mount.cifs, to enable user unmounts umount.cifs must be marked
-as suid (e.g. "chmod +s /sbin/umount.cifs") or equivalent (some distributions
+as suid (e.g. ``chmod +s /sbin/umount.cifs``) or equivalent (some distributions
allow adding entries to a file to the /etc/permissions file to achieve the
equivalent suid effect). For this utility to succeed the target path
must be a cifs mount, and the uid of the current user must match the uid
of the user who mounted the resource.
-Also note that the customary way of allowing user mounts and unmounts is
+Also note that the customary way of allowing user mounts and unmounts is
(instead of using mount.cifs and unmount.cifs as suid) to add a line
to the file /etc/fstab for each //server/share you wish to mount, but
this can become unwieldy when potential mount targets include many
or unpredictable UNC names.
-Samba Considerations
+Samba Considerations
====================
+
Most current servers support SMB2.1 and SMB3 which are more secure,
but there are useful protocol extensions for the older less secure CIFS
dialect, so to get the maximum benefit if mounting using the older dialect
(CIFS/SMB1), we recommend using a server that supports the SNIA CIFS
Unix Extensions standard (e.g. almost any version of Samba ie version
2.2.5 or later) but the CIFS vfs works fine with a wide variety of CIFS servers.
-Note that uid, gid and file permissions will display default values if you do
-not have a server that supports the Unix extensions for CIFS (such as Samba
-2.2.5 or later). To enable the Unix CIFS Extensions in the Samba server, add
-the line:
+Note that uid, gid and file permissions will display default values if you do
+not have a server that supports the Unix extensions for CIFS (such as Samba
+2.2.5 or later). To enable the Unix CIFS Extensions in the Samba server, add
+the line::
unix extensions = yes
-
-to your smb.conf file on the server. Note that the following smb.conf settings
-are also useful (on the Samba server) when the majority of clients are Unix or
-Linux:
+
+to your smb.conf file on the server. Note that the following smb.conf settings
+are also useful (on the Samba server) when the majority of clients are Unix or
+Linux::
case sensitive = yes
- delete readonly = yes
+ delete readonly = yes
ea support = yes
Note that server ea support is required for supporting xattrs from the Linux
-cifs client, and that EA support is present in later versions of Samba (e.g.
+cifs client, and that EA support is present in later versions of Samba (e.g.
3.0.6 and later (also EA support works in all versions of Windows, at least to
shares on NTFS filesystems). Extended Attribute (xattr) support is an optional
feature of most Linux filesystems which may require enabling via
make menuconfig. Client support for extended attributes (user xattr) can be
-disabled on a per-mount basis by specifying "nouser_xattr" on mount.
+disabled on a per-mount basis by specifying ``nouser_xattr`` on mount.
The CIFS client can get and set POSIX ACLs (getfacl, setfacl) to Samba servers
-version 3.10 and later. Setting POSIX ACLs requires enabling both XATTR and
+version 3.10 and later. Setting POSIX ACLs requires enabling both XATTR and
then POSIX support in the CIFS configuration options when building the cifs
module. POSIX ACL support can be disabled on a per mount basic by specifying
-"noacl" on mount.
-
-Some administrators may want to change Samba's smb.conf "map archive" and
-"create mask" parameters from the default. Unless the create mask is changed
+``noacl`` on mount.
+
+Some administrators may want to change Samba's smb.conf ``map archive`` and
+``create mask`` parameters from the default. Unless the create mask is changed
newly created files can end up with an unnecessarily restrictive default mode,
which may not be what you want, although if the CIFS Unix extensions are
enabled on the server and client, subsequent setattr calls (e.g. chmod) can
-fix the mode. Note that creating special devices (mknod) remotely
-may require specifying a mkdev function to Samba if you are not using
+fix the mode. Note that creating special devices (mknod) remotely
+may require specifying a mkdev function to Samba if you are not using
Samba 3.0.6 or later. For more information on these see the manual pages
-("man smb.conf") on the Samba server system. Note that the cifs vfs,
-unlike the smbfs vfs, does not read the smb.conf on the client system
-(the few optional settings are passed in on mount via -o parameters instead).
+(``man smb.conf``) on the Samba server system. Note that the cifs vfs,
+unlike the smbfs vfs, does not read the smb.conf on the client system
+(the few optional settings are passed in on mount via -o parameters instead).
Note that Samba 2.2.7 or later includes a fix that allows the CIFS VFS to delete
-open files (required for strict POSIX compliance). Windows Servers already
+open files (required for strict POSIX compliance). Windows Servers already
supported this feature. Samba server does not allow symlinks that refer to files
outside of the share, so in Samba versions prior to 3.0.6, most symlinks to
-files with absolute paths (ie beginning with slash) such as:
+files with absolute paths (ie beginning with slash) such as::
+
ln -s /mnt/foo bar
-would be forbidden. Samba 3.0.6 server or later includes the ability to create
-such symlinks safely by converting unsafe symlinks (ie symlinks to server
+
+would be forbidden. Samba 3.0.6 server or later includes the ability to create
+such symlinks safely by converting unsafe symlinks (ie symlinks to server
files that are outside of the share) to a samba specific format on the server
that is ignored by local server applications and non-cifs clients and that will
not be traversed by the Samba server). This is opaque to the Linux client
application using the cifs vfs. Absolute symlinks will work to Samba 3.0.5 or
later, but only for remote clients using the CIFS Unix extensions, and will
be invisbile to Windows clients and typically will not affect local
-applications running on the same server as Samba.
+applications running on the same server as Samba.
-Use instructions:
+Use instructions
================
-Once the CIFS VFS support is built into the kernel or installed as a module
+
+Once the CIFS VFS support is built into the kernel or installed as a module
(cifs.ko), you can use mount syntax like the following to access Samba or
-Mac or Windows servers:
+Mac or Windows servers::
mount -t cifs //9.53.216.11/e$ /mnt -o username=myname,password=mypassword
Before -o the option -v may be specified to make the mount.cifs
-mount helper display the mount steps more verbosely.
+mount helper display the mount steps more verbosely.
After -o the following commonly used cifs vfs specific options
-are supported:
+are supported::
username=<username>
password=<password>
domain=<domain name>
-
+
Other cifs mount options are described below. Use of TCP names (in addition to
ip addresses) is available if the mount helper (mount.cifs) is installed. If
you do not trust the server to which are mounted, or if you do not have
cifs signing enabled (and the physical network is insecure), consider use
-of the standard mount options "noexec" and "nosuid" to reduce the risk of
+of the standard mount options ``noexec`` and ``nosuid`` to reduce the risk of
running an altered binary on your local system (downloaded from a hostile server
or altered by a hostile router).
Although mounting using format corresponding to the CIFS URL specification is
not possible in mount.cifs yet, it is possible to use an alternate format
for the server and sharename (which is somewhat similar to NFS style mount
-syntax) instead of the more widely used UNC format (i.e. \\server\share):
+syntax) instead of the more widely used UNC format (i.e. \\server\share)::
+
mount -t cifs tcp_name_of_server:share_name /mnt -o user=myname,pass=mypasswd
When using the mount helper mount.cifs, passwords may be specified via alternate
-mechanisms, instead of specifying it after -o using the normal "pass=" syntax
+mechanisms, instead of specifying it after -o using the normal ``pass=`` syntax
on the command line:
1) By including it in a credential file. Specify credentials=filename as one
-of the mount options. Credential files contain two lines
- username=someuser
- password=your_password
+of the mount options. Credential files contain two lines::
+
+ username=someuser
+ password=your_password
+
2) By specifying the password in the PASSWD environment variable (similarly
-the user name can be taken from the USER environment variable).
+ the user name can be taken from the USER environment variable).
3) By specifying the password in a file by name via PASSWD_FILE
4) By specifying the password in a file by file descriptor via PASSWD_FD
@@ -229,39 +252,47 @@ If no password is provided, mount.cifs will prompt for password entry
Restrictions
============
-Servers must support either "pure-TCP" (port 445 TCP/IP CIFS connections) or RFC
-1001/1002 support for "Netbios-Over-TCP/IP." This is not likely to be a
+
+Servers must support either "pure-TCP" (port 445 TCP/IP CIFS connections) or RFC
+1001/1002 support for "Netbios-Over-TCP/IP." This is not likely to be a
problem as most servers support this.
Valid filenames differ between Windows and Linux. Windows typically restricts
-filenames which contain certain reserved characters (e.g.the character :
+filenames which contain certain reserved characters (e.g.the character :
which is used to delimit the beginning of a stream name by Windows), while
Linux allows a slightly wider set of valid characters in filenames. Windows
servers can remap such characters when an explicit mapping is specified in
-the Server's registry. Samba starting with version 3.10 will allow such
+the Server's registry. Samba starting with version 3.10 will allow such
filenames (ie those which contain valid Linux characters, which normally
would be forbidden for Windows/CIFS semantics) as long as the server is
configured for Unix Extensions (and the client has not disabled
/proc/fs/cifs/LinuxExtensionsEnabled). In addition the mount option
-"mapposix" can be used on CIFS (vers=1.0) to force the mapping of
+``mapposix`` can be used on CIFS (vers=1.0) to force the mapping of
illegal Windows/NTFS/SMB characters to a remap range (this mount parm
-is the default for SMB3). This remap ("mapposix") range is also
+is the default for SMB3). This remap (``mapposix``) range is also
compatible with Mac (and "Services for Mac" on some older Windows).
CIFS VFS Mount Options
======================
A partial list of the supported mount options follows:
- username The user name to use when trying to establish
+
+ username
+ The user name to use when trying to establish
the CIFS session.
- password The user password. If the mount helper is
+ password
+ The user password. If the mount helper is
installed, the user will be prompted for password
if not supplied.
- ip The ip address of the target server
- unc The target server Universal Network Name (export) to
- mount.
- domain Set the SMB/CIFS workgroup name prepended to the
+ ip
+ The ip address of the target server
+ unc
+ The target server Universal Network Name (export) to
+ mount.
+ domain
+ Set the SMB/CIFS workgroup name prepended to the
username during CIFS session establishment
- forceuid Set the default uid for inodes to the uid
+ forceuid
+ Set the default uid for inodes to the uid
passed in on mount. For mounts to servers
which do support the CIFS Unix extensions, such as a
properly configured Samba server, the server provides
@@ -276,32 +307,39 @@ A partial list of the supported mount options follows:
extensions, the default uid (and gid) returned on lookup
of existing files will be the uid (gid) of the person
who executed the mount (root, except when mount.cifs
- is configured setuid for user mounts) unless the "uid="
+ is configured setuid for user mounts) unless the ``uid=``
(gid) mount option is specified. Also note that permission
checks (authorization checks) on accesses to a file occur
at the server, but there are cases in which an administrator
may want to restrict at the client as well. For those
servers which do not report a uid/gid owner
(such as Windows), permissions can also be checked at the
- client, and a crude form of client side permission checking
- can be enabled by specifying file_mode and dir_mode on
+ client, and a crude form of client side permission checking
+ can be enabled by specifying file_mode and dir_mode on
the client. (default)
- forcegid (similar to above but for the groupid instead of uid) (default)
- noforceuid Fill in file owner information (uid) by requesting it from
+ forcegid
+ (similar to above but for the groupid instead of uid) (default)
+ noforceuid
+ Fill in file owner information (uid) by requesting it from
the server if possible. With this option, the value given in
the uid= option (on mount) will only be used if the server
can not support returning uids on inodes.
- noforcegid (similar to above but for the group owner, gid, instead of uid)
- uid Set the default uid for inodes, and indicate to the
+ noforcegid
+ (similar to above but for the group owner, gid, instead of uid)
+ uid
+ Set the default uid for inodes, and indicate to the
cifs kernel driver which local user mounted. If the server
supports the unix extensions the default uid is
not used to fill in the owner fields of inodes (files)
- unless the "forceuid" parameter is specified.
- gid Set the default gid for inodes (similar to above).
- file_mode If CIFS Unix extensions are not supported by the server
+ unless the ``forceuid`` parameter is specified.
+ gid
+ Set the default gid for inodes (similar to above).
+ file_mode
+ If CIFS Unix extensions are not supported by the server
this overrides the default mode for file inodes.
- fsc Enable local disk caching using FS-Cache (off by default). This
- option could be useful to improve performance on a slow link,
+ fsc
+ Enable local disk caching using FS-Cache (off by default). This
+ option could be useful to improve performance on a slow link,
heavily loaded server and/or network where reading from the
disk is faster than reading from the server (over the network).
This could also impact scalability positively as the
@@ -310,18 +348,22 @@ A partial list of the supported mount options follows:
type workloads. So, you need to consider carefully your
workload/scenario before using this option. Currently, local
disk caching is functional for CIFS files opened as read-only.
- dir_mode If CIFS Unix extensions are not supported by the server
+ dir_mode
+ If CIFS Unix extensions are not supported by the server
this overrides the default mode for directory inodes.
- port attempt to contact the server on this tcp port, before
+ port
+ attempt to contact the server on this tcp port, before
trying the usual ports (port 445, then 139).
- iocharset Codepage used to convert local path names to and from
+ iocharset
+ Codepage used to convert local path names to and from
Unicode. Unicode is used by default for network path
names if the server supports it. If iocharset is
not specified then the nls_default specified
during the local client kernel build will be used.
If server does not support Unicode, this parameter is
unused.
- rsize default read size (usually 16K). The client currently
+ rsize
+ default read size (usually 16K). The client currently
can not use rsize larger than CIFSMaxBufSize. CIFSMaxBufSize
defaults to 16K and may be changed (from 8K to the maximum
kmalloc size allowed by your kernel) at module install time
@@ -333,10 +375,12 @@ A partial list of the supported mount options follows:
newer servers (e.g. Samba 3.0.26 or later) do. rsize can be
set from a minimum of 2048 to a maximum of 130048 (127K or
CIFSMaxBufSize, whichever is smaller)
- wsize default write size (default 57344)
+ wsize
+ default write size (default 57344)
maximum wsize currently allowed by CIFS is 57344 (fourteen
4096 byte pages)
- actimeo=n attribute cache timeout in seconds (default 1 second).
+ actimeo=n
+ attribute cache timeout in seconds (default 1 second).
After this timeout, the cifs client requests fresh attribute
information from the server. This option allows to tune the
attribute cache timeout to suit the workload needs. Shorter
@@ -345,49 +389,67 @@ A partial list of the supported mount options follows:
of calls to the server at the expense of less stricter cache
coherency checks (i.e. incorrect attribute cache for a short
period of time).
- rw mount the network share read-write (note that the
+ rw
+ mount the network share read-write (note that the
server may still consider the share read-only)
- ro mount network share read-only
- version used to distinguish different versions of the
+ ro
+ mount network share read-only
+ version
+ used to distinguish different versions of the
mount helper utility (not typically needed)
- sep if first mount option (after the -o), overrides
+ sep
+ if first mount option (after the -o), overrides
the comma as the separator between the mount
- parms. e.g.
+ parms. e.g.::
+
-o user=myname,password=mypassword,domain=mydom
- could be passed instead with period as the separator by
+
+ could be passed instead with period as the separator by::
+
-o sep=.user=myname.password=mypassword.domain=mydom
+
this might be useful when comma is contained within username
or password or domain. This option is less important
when the cifs mount helper cifs.mount (version 1.1 or later)
is used.
- nosuid Do not allow remote executables with the suid bit
+ nosuid
+ Do not allow remote executables with the suid bit
program to be executed. This is only meaningful for mounts
to servers such as Samba which support the CIFS Unix Extensions.
If you do not trust the servers in your network (your mount
targets) it is recommended that you specify this option for
greater security.
- exec Permit execution of binaries on the mount.
- noexec Do not permit execution of binaries on the mount.
- dev Recognize block devices on the remote mount.
- nodev Do not recognize devices on the remote mount.
- suid Allow remote files on this mountpoint with suid enabled to
+ exec
+ Permit execution of binaries on the mount.
+ noexec
+ Do not permit execution of binaries on the mount.
+ dev
+ Recognize block devices on the remote mount.
+ nodev
+ Do not recognize devices on the remote mount.
+ suid
+ Allow remote files on this mountpoint with suid enabled to
be executed (default for mounts when executed as root,
nosuid is default for user mounts).
- credentials Although ignored by the cifs kernel component, it is used by
+ credentials
+ Although ignored by the cifs kernel component, it is used by
the mount helper, mount.cifs. When mount.cifs is installed it
- opens and reads the credential file specified in order
+ opens and reads the credential file specified in order
to obtain the userid and password arguments which are passed to
the cifs vfs.
- guest Although ignored by the kernel component, the mount.cifs
+ guest
+ Although ignored by the kernel component, the mount.cifs
mount helper will not prompt the user for a password
if guest is specified on the mount options. If no
password is specified a null password will be used.
- perm Client does permission checks (vfs_permission check of uid
+ perm
+ Client does permission checks (vfs_permission check of uid
and gid of the file against the mode and desired operation),
Note that this is in addition to the normal ACL check on the
- target machine done by the server software.
+ target machine done by the server software.
Client permission checking is enabled by default.
- noperm Client does not do permission checks. This can expose
+ noperm
+ Client does not do permission checks. This can expose
files on this mount to access by other users on the local
client system. It is typically only needed when the server
supports the CIFS Unix Extensions but the UIDs/GIDs on the
@@ -399,7 +461,8 @@ A partial list of the supported mount options follows:
Note that this does not affect the normal ACL check on the
target machine done by the server software (of the server
ACL against the user name provided at mount time).
- serverino Use server's inode numbers instead of generating automatically
+ serverino
+ Use server's inode numbers instead of generating automatically
incrementing inode numbers on the client. Although this will
make it easier to spot hardlinked files (as they will have
the same inode numbers) and inode numbers may be persistent,
@@ -412,14 +475,16 @@ A partial list of the supported mount options follows:
or the CIFS Unix Extensions equivalent and for those
this mount option will have no effect. Exporting cifs mounts
under nfsd requires this mount option on the cifs mount.
- This is now the default if server supports the
+ This is now the default if server supports the
required network operation.
- noserverino Client generates inode numbers (rather than using the actual one
+ noserverino
+ Client generates inode numbers (rather than using the actual one
from the server). These inode numbers will vary after
unmount or reboot which can confuse some applications,
but not all server filesystems support unique inode
numbers.
- setuids If the CIFS Unix extensions are negotiated with the server
+ setuids
+ If the CIFS Unix extensions are negotiated with the server
the client will attempt to set the effective uid and gid of
the local process on newly created files, directories, and
devices (create, mkdir, mknod). If the CIFS Unix Extensions
@@ -427,9 +492,10 @@ A partial list of the supported mount options follows:
instead of using the default uid and gid specified on
the mount, cache the new file's uid and gid locally which means
that the uid for the file can change when the inode is
- reloaded (or the user remounts the share).
- nosetuids The client will not attempt to set the uid and gid on
- on newly created files, directories, and devices (create,
+ reloaded (or the user remounts the share).
+ nosetuids
+ The client will not attempt to set the uid and gid on
+ on newly created files, directories, and devices (create,
mkdir, mknod) which will result in the server setting the
uid and gid to the default (usually the server uid of the
user who mounted the share). Letting the server (rather than
@@ -437,38 +503,49 @@ A partial list of the supported mount options follows:
Unix Extensions are not negotiated then the uid and gid for
new files will appear to be the uid (gid) of the mounter or the
uid (gid) parameter specified on the mount.
- netbiosname When mounting to servers via port 139, specifies the RFC1001
- source name to use to represent the client netbios machine
+ netbiosname
+ When mounting to servers via port 139, specifies the RFC1001
+ source name to use to represent the client netbios machine
name when doing the RFC1001 netbios session initialize.
- direct Do not do inode data caching on files opened on this mount.
+ direct
+ Do not do inode data caching on files opened on this mount.
This precludes mmapping files on this mount. In some cases
with fast networks and little or no caching benefits on the
client (e.g. when the application is doing large sequential
- reads bigger than page size without rereading the same data)
+ reads bigger than page size without rereading the same data)
this can provide better performance than the default
- behavior which caches reads (readahead) and writes
- (writebehind) through the local Linux client pagecache
+ behavior which caches reads (readahead) and writes
+ (writebehind) through the local Linux client pagecache
if oplock (caching token) is granted and held. Note that
direct allows write operations larger than page size
to be sent to the server.
- strictcache Use for switching on strict cache mode. In this mode the
+ strictcache
+ Use for switching on strict cache mode. In this mode the
client read from the cache all the time it has Oplock Level II,
otherwise - read from the server. All written data are stored
in the cache, but if the client doesn't have Exclusive Oplock,
it writes the data to the server.
- rwpidforward Forward pid of a process who opened a file to any read or write
+ rwpidforward
+ Forward pid of a process who opened a file to any read or write
operation on that file. This prevent applications like WINE
from failing on read and write if we use mandatory brlock style.
- acl Allow setfacl and getfacl to manage posix ACLs if server
+ acl
+ Allow setfacl and getfacl to manage posix ACLs if server
supports them. (default)
- noacl Do not allow setfacl and getfacl calls on this mount
- user_xattr Allow getting and setting user xattrs (those attributes whose
- name begins with "user." or "os2.") as OS/2 EAs (extended
+ noacl
+ Do not allow setfacl and getfacl calls on this mount
+ user_xattr
+ Allow getting and setting user xattrs (those attributes whose
+ name begins with ``user.`` or ``os2.``) as OS/2 EAs (extended
attributes) to the server. This allows support of the
setfattr and getfattr utilities. (default)
- nouser_xattr Do not allow getfattr/setfattr to get/set/list xattrs
- mapchars Translate six of the seven reserved characters (not backslash)
+ nouser_xattr
+ Do not allow getfattr/setfattr to get/set/list xattrs
+ mapchars
+ Translate six of the seven reserved characters (not backslash)::
+
*?<>|:
+
to the remap range (above 0xF000), which also
allows the CIFS client to recognize files created with
such characters by Windows's POSIX emulation. This can
@@ -477,39 +554,47 @@ A partial list of the supported mount options follows:
whose names contain any of these seven characters).
This has no effect if the server does not support
Unicode on the wire.
- nomapchars Do not translate any of these seven characters (default).
- nocase Request case insensitive path name matching (case
+ nomapchars
+ Do not translate any of these seven characters (default).
+ nocase
+ Request case insensitive path name matching (case
sensitive is the default if the server supports it).
- (mount option "ignorecase" is identical to "nocase")
- posixpaths If CIFS Unix extensions are supported, attempt to
+ (mount option ``ignorecase`` is identical to ``nocase``)
+ posixpaths
+ If CIFS Unix extensions are supported, attempt to
negotiate posix path name support which allows certain
characters forbidden in typical CIFS filenames, without
requiring remapping. (default)
- noposixpaths If CIFS Unix extensions are supported, do not request
+ noposixpaths
+ If CIFS Unix extensions are supported, do not request
posix path name support (this may cause servers to
reject creatingfile with certain reserved characters).
- nounix Disable the CIFS Unix Extensions for this mount (tree
+ nounix
+ Disable the CIFS Unix Extensions for this mount (tree
connection). This is rarely needed, but it may be useful
in order to turn off multiple settings all at once (ie
posix acls, posix locks, posix paths, symlink support
and retrieving uids/gids/mode from the server) or to
work around a bug in server which implement the Unix
Extensions.
- nobrl Do not send byte range lock requests to the server.
+ nobrl
+ Do not send byte range lock requests to the server.
This is necessary for certain applications that break
with cifs style mandatory byte range locks (and most
cifs servers do not yet support requesting advisory
byte range locks).
- forcemandatorylock Even if the server supports posix (advisory) byte range
+ forcemandatorylock
+ Even if the server supports posix (advisory) byte range
locking, send only mandatory lock requests. For some
(presumably rare) applications, originally coded for
DOS/Windows, which require Windows style mandatory byte range
locking, they may be able to take advantage of this option,
forcing the cifs client to only send mandatory locks
even if the cifs server would support posix advisory locks.
- "forcemand" is accepted as a shorter form of this mount
+ ``forcemand`` is accepted as a shorter form of this mount
option.
- nostrictsync If this mount option is set, when an application does an
+ nostrictsync
+ If this mount option is set, when an application does an
fsync call then the cifs client does not send an SMB Flush
to the server (to force the server to write all dirty data
for this file immediately to disk), although cifs still sends
@@ -522,41 +607,50 @@ A partial list of the supported mount options follows:
crash. If this mount option is not set, by default cifs will
send an SMB flush request (and wait for a response) on every
fsync call.
- nodfs Disable DFS (global name space support) even if the
+ nodfs
+ Disable DFS (global name space support) even if the
server claims to support it. This can help work around
a problem with parsing of DFS paths with Samba server
versions 3.0.24 and 3.0.25.
- remount remount the share (often used to change from ro to rw mounts
- or vice versa)
- cifsacl Report mode bits (e.g. on stat) based on the Windows ACL for
- the file. (EXPERIMENTAL)
- servern Specify the server 's netbios name (RFC1001 name) to use
- when attempting to setup a session to the server.
+ remount
+ remount the share (often used to change from ro to rw mounts
+ or vice versa)
+ cifsacl
+ Report mode bits (e.g. on stat) based on the Windows ACL for
+ the file. (EXPERIMENTAL)
+ servern
+ Specify the server 's netbios name (RFC1001 name) to use
+ when attempting to setup a session to the server.
This is needed for mounting to some older servers (such
as OS/2 or Windows 98 and Windows ME) since they do not
support a default server name. A server name can be up
to 15 characters long and is usually uppercased.
- sfu When the CIFS Unix Extensions are not negotiated, attempt to
+ sfu
+ When the CIFS Unix Extensions are not negotiated, attempt to
create device files and fifos in a format compatible with
Services for Unix (SFU). In addition retrieve bits 10-12
of the mode via the SETFILEBITS extended attribute (as
SFU does). In the future the bottom 9 bits of the
mode also will be emulated using queries of the security
descriptor (ACL).
- mfsymlinks Enable support for Minshall+French symlinks
+ mfsymlinks
+ Enable support for Minshall+French symlinks
(see http://wiki.samba.org/index.php/UNIX_Extensions#Minshall.2BFrench_symlinks)
This option is ignored when specified together with the
'sfu' option. Minshall+French symlinks are used even if
the server supports the CIFS Unix Extensions.
- sign Must use packet signing (helps avoid unwanted data modification
+ sign
+ Must use packet signing (helps avoid unwanted data modification
by intermediate systems in the route). Note that signing
does not work with lanman or plaintext authentication.
- seal Must seal (encrypt) all data on this mounted share before
+ seal
+ Must seal (encrypt) all data on this mounted share before
sending on the network. Requires support for Unix Extensions.
Note that this differs from the sign mount option in that it
causes encryption of data sent over this mounted share but other
shares mounted to the same server are unaffected.
- locallease This option is rarely needed. Fcntl F_SETLEASE is
+ locallease
+ This option is rarely needed. Fcntl F_SETLEASE is
used by some applications such as Samba and NFSv4 server to
check to see whether a file is cacheable. CIFS has no way
to explicitly request a lease, but can check whether a file
@@ -569,51 +663,73 @@ A partial list of the supported mount options follows:
will allow the cifs client to check for leases (only) locally
for files which are not oplocked instead of denying leases
in that case. (EXPERIMENTAL)
- sec Security mode. Allowed values are:
- none attempt to connection as a null user (no name)
- krb5 Use Kerberos version 5 authentication
- krb5i Use Kerberos authentication and packet signing
- ntlm Use NTLM password hashing (default)
- ntlmi Use NTLM password hashing with signing (if
+ sec
+ Security mode. Allowed values are:
+
+ none
+ attempt to connection as a null user (no name)
+ krb5
+ Use Kerberos version 5 authentication
+ krb5i
+ Use Kerberos authentication and packet signing
+ ntlm
+ Use NTLM password hashing (default)
+ ntlmi
+ Use NTLM password hashing with signing (if
/proc/fs/cifs/PacketSigningEnabled on or if
- server requires signing also can be the default)
- ntlmv2 Use NTLMv2 password hashing
- ntlmv2i Use NTLMv2 password hashing with packet signing
- lanman (if configured in kernel config) use older
+ server requires signing also can be the default)
+ ntlmv2
+ Use NTLMv2 password hashing
+ ntlmv2i
+ Use NTLMv2 password hashing with packet signing
+ lanman
+ (if configured in kernel config) use older
lanman hash
-hard Retry file operations if server is not responding
-soft Limit retries to unresponsive servers (usually only
+ hard
+ Retry file operations if server is not responding
+ soft
+ Limit retries to unresponsive servers (usually only
one retry) before returning an error. (default)
The mount.cifs mount helper also accepts a few mount options before -o
including:
+=============== ===============================================================
-S take password from stdin (equivalent to setting the environment
- variable "PASSWD_FD=0"
+ variable ``PASSWD_FD=0``
-V print mount.cifs version
-? display simple usage information
+=============== ===============================================================
With most 2.6 kernel versions of modutils, the version of the cifs kernel
module can be displayed via modinfo.
Misc /proc/fs/cifs Flags and Debug Info
=======================================
+
Informational pseudo-files:
+
+======================= =======================================================
DebugData Displays information about active CIFS sessions and
shares, features enabled as well as the cifs.ko
version.
Stats Lists summary resource usage information as well as per
share statistics.
+======================= =======================================================
Configuration pseudo-files:
+
+======================= =======================================================
SecurityFlags Flags which control security negotiation and
also packet signing. Authentication (may/must)
flags (e.g. for NTLM and/or NTLMv2) may be combined with
the signing flags. Specifying two different password
- hashing mechanisms (as "must use") on the other hand
- does not make much sense. Default flags are
- 0x07007
- (NTLM, NTLMv2 and packet signing allowed). The maximum
+ hashing mechanisms (as "must use") on the other hand
+ does not make much sense. Default flags are::
+
+ 0x07007
+
+ (NTLM, NTLMv2 and packet signing allowed). The maximum
allowable flags if you want to allow mounts to servers
using weaker password hashes is 0x37037 (lanman,
plaintext, ntlm, ntlmv2, signing allowed). Some
@@ -626,21 +742,21 @@ SecurityFlags Flags which control security negotiation and
laintext passwords using the older lanman dialect
form of the session setup SMB. (e.g. for authentication
using plain text passwords, set the SecurityFlags
- to 0x30030):
-
- may use packet signing 0x00001
- must use packet signing 0x01001
- may use NTLM (most common password hash) 0x00002
- must use NTLM 0x02002
- may use NTLMv2 0x00004
- must use NTLMv2 0x04004
- may use Kerberos security 0x00008
- must use Kerberos 0x08008
- may use lanman (weak) password hash 0x00010
- must use lanman password hash 0x10010
- may use plaintext passwords 0x00020
- must use plaintext passwords 0x20020
- (reserved for future packet encryption) 0x00040
+ to 0x30030)::
+
+ may use packet signing 0x00001
+ must use packet signing 0x01001
+ may use NTLM (most common password hash) 0x00002
+ must use NTLM 0x02002
+ may use NTLMv2 0x00004
+ must use NTLMv2 0x04004
+ may use Kerberos security 0x00008
+ must use Kerberos 0x08008
+ may use lanman (weak) password hash 0x00010
+ must use lanman password hash 0x10010
+ may use plaintext passwords 0x00020
+ must use plaintext passwords 0x20020
+ (reserved for future packet encryption) 0x00040
cifsFYI If set to non-zero value, additional debug information
will be logged to the system error log. This field
@@ -650,14 +766,19 @@ cifsFYI If set to non-zero value, additional debug information
Some debugging statements are not compiled into the
cifs kernel unless CONFIG_CIFS_DEBUG2 is enabled in the
kernel configuration. cifsFYI may be set to one or
- nore of the following flags (7 sets them all):
+ nore of the following flags (7 sets them all)::
+
+ +-----------------------------------------------+------+
+ | log cifs informational messages | 0x01 |
+ +-----------------------------------------------+------+
+ | log return codes from cifs entry points | 0x02 |
+ +-----------------------------------------------+------+
+ | log slow responses | 0x04 |
+ | (ie which take longer than 1 second) | |
+ | | |
+ | CONFIG_CIFS_STATS2 must be enabled in .config | |
+ +-----------------------------------------------+------+
- log cifs informational messages 0x01
- log return codes from cifs entry points 0x02
- log slow responses (ie which take longer than 1 second)
- CONFIG_CIFS_STATS2 must be enabled in .config 0x04
-
-
traceSMB If set to one, debug information is logged to the
system error log with the start of smb requests
and responses (default 0)
@@ -671,24 +792,25 @@ LinuxExtensionsEnabled If set to one then the client will attempt to
as support symbolic links. If you use servers
such as Samba that support the CIFS Unix
extensions but do not want to use symbolic link
- support and want to map the uid and gid fields
- to values supplied at mount (rather than the
+ support and want to map the uid and gid fields
+ to values supplied at mount (rather than the
actual values, then set this to zero. (default 1)
+======================= =======================================================
-These experimental features and tracing can be enabled by changing flags in
-/proc/fs/cifs (after the cifs module has been installed or built into the
-kernel, e.g. insmod cifs). To enable a feature set it to 1 e.g. to enable
-tracing to the kernel message log type:
+These experimental features and tracing can be enabled by changing flags in
+/proc/fs/cifs (after the cifs module has been installed or built into the
+kernel, e.g. insmod cifs). To enable a feature set it to 1 e.g. to enable
+tracing to the kernel message log type::
echo 7 > /proc/fs/cifs/cifsFYI
-
+
cifsFYI functions as a bit mask. Setting it to 1 enables additional kernel
logging of various informational messages. 2 enables logging of non-zero
SMB return codes while 4 enables logging of requests that take longer
-than one second to complete (except for byte range lock requests).
+than one second to complete (except for byte range lock requests).
Setting it to 4 requires CONFIG_CIFS_STATS2 to be set in kernel configuration
(.config). Setting it to seven enables all three. Finally, tracing
-the start of smb requests and responses can be enabled via:
+the start of smb requests and responses can be enabled via::
echo 1 > /proc/fs/cifs/traceSMB
@@ -700,10 +822,10 @@ server) SMB3 (or cifs) requests grouped by request type (read, write, close etc.
Also recorded is the total bytes read and bytes written to the server for
that share. Note that due to client caching effects this can be less than the
number of bytes read and written by the application running on the client.
-Statistics can be reset to zero by "echo 0 > /proc/fs/cifs/Stats" which may be
+Statistics can be reset to zero by ``echo 0 > /proc/fs/cifs/Stats`` which may be
useful if comparing performance of two different scenarios.
-
-Also note that "cat /proc/fs/cifs/DebugData" will display information about
+
+Also note that ``cat /proc/fs/cifs/DebugData`` will display information about
the active sessions and the shares that are mounted.
Enabling Kerberos (extended security) works but requires version 1.2 or later
@@ -725,19 +847,23 @@ space to ease network configuration and improve reliability.
To use cifs Kerberos and DFS support, the Linux keyutils package should be
installed and something like the following lines should be added to the
-/etc/request-key.conf file:
+/etc/request-key.conf file::
-create cifs.spnego * * /usr/local/sbin/cifs.upcall %k
-create dns_resolver * * /usr/local/sbin/cifs.upcall %k
+ create cifs.spnego * * /usr/local/sbin/cifs.upcall %k
+ create dns_resolver * * /usr/local/sbin/cifs.upcall %k
CIFS kernel module parameters
=============================
These module parameters can be specified or modified either during the time of
-module loading or during the runtime by using the interface
+module loading or during the runtime by using the interface::
+
/proc/module/cifs/parameters/<param>
-i.e. echo "value" > /sys/module/cifs/parameters/<param>
+i.e.::
-1. enable_oplocks - Enable or disable oplocks. Oplocks are enabled by default.
- [Y/y/1]. To disable use any of [N/n/0].
+ echo "value" > /sys/module/cifs/parameters/<param>
+================= ==========================================================
+1. enable_oplocks Enable or disable oplocks. Oplocks are enabled by default.
+ [Y/y/1]. To disable use any of [N/n/0].
+================= ==========================================================
diff --git a/Documentation/filesystems/cifs/winucase_convert.pl b/Documentation/admin-guide/cifs/winucase_convert.pl
similarity index 100%
rename from Documentation/filesystems/cifs/winucase_convert.pl
rename to Documentation/admin-guide/cifs/winucase_convert.pl
diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index 3f8f7d564552..4a9de9806eaf 100644
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst
@@ -80,6 +80,7 @@ configure specific aspects of kernel behavior to your liking.
blockdev/index
ext4
binderfs
+ cifs/index
xfs
pm/index
thunderbolt
diff --git a/MAINTAINERS b/MAINTAINERS
index 4cd39259fcdc..c8c09d4062a1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4099,7 +4099,7 @@ L: samba-technical@lists.samba.org (moderated for non-subscribers)
W: http://linux-cifs.samba.org/
T: git git://git.samba.org/sfrench/cifs-2.6.git
S: Supported
-F: Documentation/filesystems/cifs/
+F: Documentation/admin-guide/cifs/
F: fs/cifs/
COMPACTPCI HOTPLUG CORE
--
2.21.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 13/22] docs: fs: convert docs without extension to ReST
2019-07-22 11:07 [PATCH 00/22] ReST conversion of text files without .txt extension Mauro Carvalho Chehab
2019-07-22 11:07 ` [PATCH 12/22] docs: fs: cifs: convert to ReST and add to admin-guide book Mauro Carvalho Chehab
@ 2019-07-22 11:07 ` Mauro Carvalho Chehab
1 sibling, 0 replies; 3+ messages in thread
From: Mauro Carvalho Chehab @ 2019-07-22 11:07 UTC (permalink / raw)
Cc: Mauro Carvalho Chehab, Jonathan Corbet, Steve French,
Mike Marshall, Martin Brandenburg, linux-doc, linux-cifs,
samba-technical, devel
There are 3 remaining files without an extension inside the fs docs
dir.
Manually convert them to ReST.
In the case of the nfs/exporting.rst file, as the nfs docs
aren't ported yet, I opted to convert and add a :orphan: there,
with should be removed when it gets added into a nfs-specific
part of the fs documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
...irectory-locking => directory-locking.rst} | 40 ++-
Documentation/filesystems/index.rst | 2 +
.../filesystems/{Locking => locking.rst} | 257 ++++++++++++------
.../nfs/{Exporting => exporting.rst} | 31 ++-
Documentation/filesystems/vfs.rst | 2 +-
fs/cifs/export.c | 2 +-
fs/exportfs/expfs.c | 2 +-
fs/isofs/export.c | 2 +-
fs/orangefs/file.c | 2 +-
include/linux/dcache.h | 2 +-
include/linux/exportfs.h | 2 +-
11 files changed, 225 insertions(+), 119 deletions(-)
rename Documentation/filesystems/{directory-locking => directory-locking.rst} (86%)
rename Documentation/filesystems/{Locking => locking.rst} (79%)
rename Documentation/filesystems/nfs/{Exporting => exporting.rst} (91%)
diff --git a/Documentation/filesystems/directory-locking b/Documentation/filesystems/directory-locking.rst
similarity index 86%
rename from Documentation/filesystems/directory-locking
rename to Documentation/filesystems/directory-locking.rst
index 4e32cb961e5b..de12016ee419 100644
--- a/Documentation/filesystems/directory-locking
+++ b/Documentation/filesystems/directory-locking.rst
@@ -1,12 +1,17 @@
- Locking scheme used for directory operations is based on two
+=================
+Directory Locking
+=================
+
+
+Locking scheme used for directory operations is based on two
kinds of locks - per-inode (->i_rwsem) and per-filesystem
(->s_vfs_rename_mutex).
- When taking the i_rwsem on multiple non-directory objects, we
+When taking the i_rwsem on multiple non-directory objects, we
always acquire the locks in order by increasing address. We'll call
that "inode pointer" order in the following.
- For our purposes all operations fall in 5 classes:
+For our purposes all operations fall in 5 classes:
1) read access. Locking rules: caller locks directory we are accessing.
The lock is taken shared.
@@ -27,25 +32,29 @@ NB: we might get away with locking the the source (and target in exchange
case) shared.
5) link creation. Locking rules:
+
* lock parent
* check that source is not a directory
* lock source
* call the method.
+
All locks are exclusive.
6) cross-directory rename. The trickiest in the whole bunch. Locking
rules:
+
* lock the filesystem
* lock parents in "ancestors first" order.
* find source and target.
* if old parent is equal to or is a descendent of target
- fail with -ENOTEMPTY
+ fail with -ENOTEMPTY
* if new parent is equal to or is a descendent of source
- fail with -ELOOP
+ fail with -ELOOP
* If it's an exchange, lock both the source and the target.
* If the target exists, lock it. If the source is a non-directory,
lock it. If we need to lock both, do so in inode pointer order.
* call the method.
+
All ->i_rwsem are taken exclusive. Again, we might get away with locking
the the source (and target in exchange case) shared.
@@ -54,10 +63,11 @@ read, modified or removed by method will be locked by caller.
If no directory is its own ancestor, the scheme above is deadlock-free.
+
Proof:
First of all, at any moment we have a partial ordering of the
-objects - A < B iff A is an ancestor of B.
+ objects - A < B iff A is an ancestor of B.
That ordering can change. However, the following is true:
@@ -77,32 +87,32 @@ objects - A < B iff A is an ancestor of B.
non-directory object, except renames, which take locks on source and
target in inode pointer order in the case they are not directories.)
- Now consider the minimal deadlock. Each process is blocked on
+Now consider the minimal deadlock. Each process is blocked on
attempt to acquire some lock and already holds at least one lock. Let's
consider the set of contended locks. First of all, filesystem lock is
not contended, since any process blocked on it is not holding any locks.
Thus all processes are blocked on ->i_rwsem.
- By (3), any process holding a non-directory lock can only be
+By (3), any process holding a non-directory lock can only be
waiting on another non-directory lock with a larger address. Therefore
the process holding the "largest" such lock can always make progress, and
non-directory objects are not included in the set of contended locks.
- Thus link creation can't be a part of deadlock - it can't be
+Thus link creation can't be a part of deadlock - it can't be
blocked on source and it means that it doesn't hold any locks.
- Any contended object is either held by cross-directory rename or
+Any contended object is either held by cross-directory rename or
has a child that is also contended. Indeed, suppose that it is held by
operation other than cross-directory rename. Then the lock this operation
is blocked on belongs to child of that object due to (1).
- It means that one of the operations is cross-directory rename.
+It means that one of the operations is cross-directory rename.
Otherwise the set of contended objects would be infinite - each of them
would have a contended child and we had assumed that no object is its
own descendent. Moreover, there is exactly one cross-directory rename
(see above).
- Consider the object blocking the cross-directory rename. One
+Consider the object blocking the cross-directory rename. One
of its descendents is locked by cross-directory rename (otherwise we
would again have an infinite set of contended objects). But that
means that cross-directory rename is taking locks out of order. Due
@@ -112,7 +122,7 @@ try to acquire lock on descendent before the lock on ancestor.
Contradiction. I.e. deadlock is impossible. Q.E.D.
- These operations are guaranteed to avoid loop creation. Indeed,
+These operations are guaranteed to avoid loop creation. Indeed,
the only operation that could introduce loops is cross-directory rename.
Since the only new (parent, child) pair added by rename() is (new parent,
source), such loop would have to contain these objects and the rest of it
@@ -123,13 +133,13 @@ new parent had been equal to or a descendent of source since the moment when
we had acquired filesystem lock and rename() would fail with -ELOOP in that
case.
- While this locking scheme works for arbitrary DAGs, it relies on
+While this locking scheme works for arbitrary DAGs, it relies on
ability to check that directory is a descendent of another object. Current
implementation assumes that directory graph is a tree. This assumption is
also preserved by all operations (cross-directory rename on a tree that would
not introduce a cycle will leave it a tree and link() fails for directories).
- Notice that "directory" in the above == "anything that might have
+Notice that "directory" in the above == "anything that might have
children", so if we are going to introduce hybrid objects we will need
either to make sure that link(2) doesn't work for them or to make changes
in is_subdir() that would make it work even in presence of such beasts.
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 2de2fe2ab078..08320c35d03b 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -20,6 +20,8 @@ algorithms work.
path-lookup
api-summary
splice
+ locking
+ directory-locking
Filesystem support layers
=========================
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/locking.rst
similarity index 79%
rename from Documentation/filesystems/Locking
rename to Documentation/filesystems/locking.rst
index 204dd3ea36bb..fc3a0704553c 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/locking.rst
@@ -1,14 +1,22 @@
- The text below describes the locking rules for VFS-related methods.
+=======
+Locking
+=======
+
+The text below describes the locking rules for VFS-related methods.
It is (believed to be) up-to-date. *Please*, if you change anything in
prototypes or locking protocols - update this file. And update the relevant
instances in the tree, don't leave that to maintainers of filesystems/devices/
etc. At the very least, put the list of dubious cases in the end of this file.
Don't turn it into log - maintainers of out-of-the-tree code are supposed to
be able to use diff(1).
- Thing currently missing here: socket operations. Alexey?
---------------------------- dentry_operations --------------------------
-prototypes:
+Thing currently missing here: socket operations. Alexey?
+
+dentry_operations
+=================
+
+prototypes::
+
int (*d_revalidate)(struct dentry *, unsigned int);
int (*d_weak_revalidate)(struct dentry *, unsigned int);
int (*d_hash)(const struct dentry *, struct qstr *);
@@ -24,23 +32,30 @@ prototypes:
struct dentry *(*d_real)(struct dentry *, const struct inode *);
locking rules:
- rename_lock ->d_lock may block rcu-walk
-d_revalidate: no no yes (ref-walk) maybe
-d_weak_revalidate:no no yes no
-d_hash no no no maybe
-d_compare: yes no no maybe
-d_delete: no yes no no
-d_init: no no yes no
-d_release: no no yes no
-d_prune: no yes no no
-d_iput: no no yes no
-d_dname: no no no no
-d_automount: no no yes no
-d_manage: no no yes (ref-walk) maybe
-d_real no no yes no
---------------------------- inode_operations ---------------------------
-prototypes:
+================== =========== ======== ============== ========
+ops rename_lock ->d_lock may block rcu-walk
+================== =========== ======== ============== ========
+d_revalidate: no no yes (ref-walk) maybe
+d_weak_revalidate: no no yes no
+d_hash no no no maybe
+d_compare: yes no no maybe
+d_delete: no yes no no
+d_init: no no yes no
+d_release: no no yes no
+d_prune: no yes no no
+d_iput: no no yes no
+d_dname: no no no no
+d_automount: no no yes no
+d_manage: no no yes (ref-walk) maybe
+d_real no no yes no
+================== =========== ======== ============== ========
+
+inode_operations
+================
+
+prototypes::
+
int (*create) (struct inode *,struct dentry *,umode_t, bool);
struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int);
int (*link) (struct dentry *,struct inode *,struct dentry *);
@@ -68,7 +83,10 @@ prototypes:
locking rules:
all may block
- i_rwsem(inode)
+
+============ =============================================
+ops i_rwsem(inode)
+============ =============================================
lookup: shared
create: exclusive
link: exclusive (both)
@@ -89,17 +107,21 @@ fiemap: no
update_time: no
atomic_open: exclusive
tmpfile: no
+============ =============================================
Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_rwsem
exclusive on victim.
cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem.
-See Documentation/filesystems/directory-locking for more detailed discussion
+See Documentation/filesystems/directory-locking.rst for more detailed discussion
of the locking scheme for directory operations.
------------------------ xattr_handler operations -----------------------
-prototypes:
+xattr_handler operations
+========================
+
+prototypes::
+
bool (*list)(struct dentry *dentry);
int (*get)(const struct xattr_handler *handler, struct dentry *dentry,
struct inode *inode, const char *name, void *buffer,
@@ -110,13 +132,20 @@ prototypes:
locking rules:
all may block
- i_rwsem(inode)
+
+===== ==============
+ops i_rwsem(inode)
+===== ==============
list: no
get: no
set: exclusive
+===== ==============
+
+super_operations
+================
+
+prototypes::
---------------------------- super_operations ---------------------------
-prototypes:
struct inode *(*alloc_inode)(struct super_block *sb);
void (*free_inode)(struct inode *);
void (*destroy_inode)(struct inode *);
@@ -138,7 +167,10 @@ prototypes:
locking rules:
All may block [not true, see below]
- s_umount
+
+====================== ============ ========================
+ops s_umount note
+====================== ============ ========================
alloc_inode:
free_inode: called from RCU callback
destroy_inode:
@@ -157,6 +189,7 @@ show_options: no (namespace_sem)
quota_read: no (see below)
quota_write: no (see below)
bdev_try_to_free_page: no (see below)
+====================== ============ ========================
->statfs() has s_umount (shared) when called by ustat(2) (native or
compat), but that's an accident of bad API; s_umount is used to pin
@@ -164,31 +197,44 @@ the superblock down when we only have dev_t given us by userland to
identify the superblock. Everything else (statfs(), fstatfs(), etc.)
doesn't hold it when calling ->statfs() - superblock is pinned down
by resolving the pathname passed to syscall.
+
->quota_read() and ->quota_write() functions are both guaranteed to
be the only ones operating on the quota file by the quota code (via
dqio_sem) (unless an admin really wants to screw up something and
writes to quota files with quotas on). For other details about locking
see also dquot_operations section.
+
->bdev_try_to_free_page is called from the ->releasepage handler of
the block device inode. See there for more details.
---------------------------- file_system_type ---------------------------
-prototypes:
+file_system_type
+================
+
+prototypes::
+
struct dentry *(*mount) (struct file_system_type *, int,
const char *, void *);
void (*kill_sb) (struct super_block *);
+
locking rules:
- may block
+
+======= =========
+ops may block
+======= =========
mount yes
kill_sb yes
+======= =========
->mount() returns ERR_PTR or the root dentry; its superblock should be locked
on return.
+
->kill_sb() takes a write-locked superblock, does all shutdown work on it,
unlocks and drops the reference.
---------------------------- address_space_operations --------------------------
-prototypes:
+address_space_operations
+========================
+prototypes::
+
int (*writepage)(struct page *page, struct writeback_control *wbc);
int (*readpage)(struct file *, struct page *);
int (*writepages)(struct address_space *, struct writeback_control *);
@@ -218,14 +264,16 @@ prototypes:
locking rules:
All except set_page_dirty and freepage may block
- PageLocked(page) i_rwsem
+====================== ======================== =========
+ops PageLocked(page) i_rwsem
+====================== ======================== =========
writepage: yes, unlocks (see below)
readpage: yes, unlocks
writepages:
set_page_dirty no
readpages:
-write_begin: locks the page exclusive
-write_end: yes, unlocks exclusive
+write_begin: locks the page exclusive
+write_end: yes, unlocks exclusive
bmap:
invalidatepage: yes
releasepage: yes
@@ -239,17 +287,18 @@ is_partially_uptodate: yes
error_remove_page: yes
swap_activate: no
swap_deactivate: no
+====================== ======================== =========
- ->write_begin(), ->write_end() and ->readpage() may be called from
+->write_begin(), ->write_end() and ->readpage() may be called from
the request handler (/dev/loop).
- ->readpage() unlocks the page, either synchronously or via I/O
+->readpage() unlocks the page, either synchronously or via I/O
completion.
- ->readpages() populates the pagecache with the passed pages and starts
+->readpages() populates the pagecache with the passed pages and starts
I/O against them. They come unlocked upon I/O completion.
- ->writepage() is used for two purposes: for "memory cleansing" and for
+->writepage() is used for two purposes: for "memory cleansing" and for
"sync". These are quite different operations and the behaviour may differ
depending upon the mode.
@@ -297,70 +346,81 @@ will leave the page itself marked clean but it will be tagged as dirty in the
radix tree. This incoherency can lead to all sorts of hard-to-debug problems
in the filesystem like having dirty inodes at umount and losing written data.
- ->writepages() is used for periodic writeback and for syscall-initiated
+->writepages() is used for periodic writeback and for syscall-initiated
sync operations. The address_space should start I/O against at least
-*nr_to_write pages. *nr_to_write must be decremented for each page which is
-written. The address_space implementation may write more (or less) pages
-than *nr_to_write asks for, but it should try to be reasonably close. If
-nr_to_write is NULL, all dirty pages must be written.
+``*nr_to_write`` pages. ``*nr_to_write`` must be decremented for each page
+which is written. The address_space implementation may write more (or less)
+pages than ``*nr_to_write`` asks for, but it should try to be reasonably close.
+If nr_to_write is NULL, all dirty pages must be written.
writepages should _only_ write pages which are present on
mapping->io_pages.
- ->set_page_dirty() is called from various places in the kernel
+->set_page_dirty() is called from various places in the kernel
when the target page is marked as needing writeback. It may be called
under spinlock (it cannot block) and is sometimes called with the page
not locked.
- ->bmap() is currently used by legacy ioctl() (FIBMAP) provided by some
+->bmap() is currently used by legacy ioctl() (FIBMAP) provided by some
filesystems and by the swapper. The latter will eventually go away. Please,
keep it that way and don't breed new callers.
- ->invalidatepage() is called when the filesystem must attempt to drop
+->invalidatepage() is called when the filesystem must attempt to drop
some or all of the buffers from the page when it is being truncated. It
returns zero on success. If ->invalidatepage is zero, the kernel uses
block_invalidatepage() instead.
- ->releasepage() is called when the kernel is about to try to drop the
+->releasepage() is called when the kernel is about to try to drop the
buffers from the page in preparation for freeing it. It returns zero to
indicate that the buffers are (or may be) freeable. If ->releasepage is zero,
the kernel assumes that the fs has no private interest in the buffers.
- ->freepage() is called when the kernel is done dropping the page
+->freepage() is called when the kernel is done dropping the page
from the page cache.
- ->launder_page() may be called prior to releasing a page if
+->launder_page() may be called prior to releasing a page if
it is still found to be dirty. It returns zero if the page was successfully
cleaned, or an error value if not. Note that in order to prevent the page
getting mapped back in and redirtied, it needs to be kept locked
across the entire operation.
- ->swap_activate will be called with a non-zero argument on
+->swap_activate will be called with a non-zero argument on
files backing (non block device backed) swapfiles. A return value
of zero indicates success, in which case this file can be used for
backing swapspace. The swapspace operations will be proxied to the
address space operations.
- ->swap_deactivate() will be called in the sys_swapoff()
+->swap_deactivate() will be called in the sys_swapoff()
path after ->swap_activate() returned success.
------------------------ file_lock_operations ------------------------------
-prototypes:
+file_lock_operations
+====================
+
+prototypes::
+
void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
void (*fl_release_private)(struct file_lock *);
locking rules:
- inode->i_lock may block
+
+=================== ============= =========
+ops inode->i_lock may block
+=================== ============= =========
fl_copy_lock: yes no
-fl_release_private: maybe maybe[1]
+fl_release_private: maybe maybe[1]_
+=================== ============= =========
-[1]: ->fl_release_private for flock or POSIX locks is currently allowed
-to block. Leases however can still be freed while the i_lock is held and
-so fl_release_private called on a lease should not block.
+.. [1]:
+ ->fl_release_private for flock or POSIX locks is currently allowed
+ to block. Leases however can still be freed while the i_lock is held and
+ so fl_release_private called on a lease should not block.
+
+lock_manager_operations
+=======================
+
+prototypes::
------------------------ lock_manager_operations ---------------------------
-prototypes:
void (*lm_notify)(struct file_lock *); /* unblock callback */
int (*lm_grant)(struct file_lock *, struct file_lock *, int);
void (*lm_break)(struct file_lock *); /* break_lease callback */
@@ -368,24 +428,33 @@ prototypes:
locking rules:
- inode->i_lock blocked_lock_lock may block
+========== ============= ================= =========
+ops inode->i_lock blocked_lock_lock may block
+========== ============= ================= =========
lm_notify: yes yes no
lm_grant: no no no
lm_break: yes no no
lm_change yes no no
+========== ============= ================= =========
+
+buffer_head
+===========
+
+prototypes::
---------------------------- buffer_head -----------------------------------
-prototypes:
void (*b_end_io)(struct buffer_head *bh, int uptodate);
locking rules:
- called from interrupts. In other words, extreme care is needed here.
+
+called from interrupts. In other words, extreme care is needed here.
bh is locked, but that's all warranties we have here. Currently only RAID1,
highmem, fs/buffer.c, and fs/ntfs/aops.c are providing these. Block devices
call this method upon the IO completion.
---------------------------- block_device_operations -----------------------
-prototypes:
+block_device_operations
+=======================
+prototypes::
+
int (*open) (struct block_device *, fmode_t);
int (*release) (struct gendisk *, fmode_t);
int (*ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
@@ -399,7 +468,10 @@ prototypes:
void (*swap_slot_free_notify) (struct block_device *, unsigned long);
locking rules:
- bd_mutex
+
+======================= ===================
+ops bd_mutex
+======================= ===================
open: yes
release: yes
ioctl: no
@@ -410,6 +482,7 @@ unlock_native_capacity: no
revalidate_disk: no
getgeo: no
swap_slot_free_notify: no (see below)
+======================= ===================
media_changed, unlock_native_capacity and revalidate_disk are called only from
check_disk_change().
@@ -418,8 +491,11 @@ swap_slot_free_notify is called with swap_lock and sometimes the page lock
held.
---------------------------- file_operations -------------------------------
-prototypes:
+file_operations
+===============
+
+prototypes::
+
loff_t (*llseek) (struct file *, loff_t, int);
ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
@@ -455,7 +531,6 @@ prototypes:
size_t, unsigned int);
int (*setlease)(struct file *, long, struct file_lock **, void **);
long (*fallocate)(struct file *, int, loff_t, loff_t);
-};
locking rules:
All may block.
@@ -490,8 +565,11 @@ in sys_read() and friends.
the lease within the individual filesystem to record the result of the
operation
---------------------------- dquot_operations -------------------------------
-prototypes:
+dquot_operations
+================
+
+prototypes::
+
int (*write_dquot) (struct dquot *);
int (*acquire_dquot) (struct dquot *);
int (*release_dquot) (struct dquot *);
@@ -503,20 +581,26 @@ a proper locking wrt the filesystem and call the generic quota operations.
What filesystem should expect from the generic quota functions:
- FS recursion Held locks when called
+============== ============ =========================
+ops FS recursion Held locks when called
+============== ============ =========================
write_dquot: yes dqonoff_sem or dqptr_sem
acquire_dquot: yes dqonoff_sem or dqptr_sem
release_dquot: yes dqonoff_sem or dqptr_sem
mark_dirty: no -
write_info: yes dqonoff_sem
+============== ============ =========================
FS recursion means calling ->quota_read() and ->quota_write() from superblock
operations.
More details about quota locking can be found in fs/dquot.c.
---------------------------- vm_operations_struct -----------------------------
-prototypes:
+vm_operations_struct
+====================
+
+prototypes::
+
void (*open)(struct vm_area_struct*);
void (*close)(struct vm_area_struct*);
vm_fault_t (*fault)(struct vm_area_struct*, struct vm_fault *);
@@ -525,7 +609,10 @@ prototypes:
int (*access)(struct vm_area_struct *, unsigned long, void*, int, int);
locking rules:
- mmap_sem PageLocked(page)
+
+============= ======== ===========================
+ops mmap_sem PageLocked(page)
+============= ======== ===========================
open: yes
close: yes
fault: yes can return with page locked
@@ -533,8 +620,9 @@ map_pages: yes
page_mkwrite: yes can return with page locked
pfn_mkwrite: yes
access: yes
+============= ======== ===========================
- ->fault() is called when a previously not present pte is about
+->fault() is called when a previously not present pte is about
to be faulted in. The filesystem must find and return the page associated
with the passed in "pgoff" in the vm_fault structure. If it is possible that
the page may be truncated and/or invalidated, then the filesystem must lock
@@ -542,7 +630,7 @@ the page, then ensure it is not already truncated (the page lock will block
subsequent truncate), and then return with VM_FAULT_LOCKED, and the page
locked. The VM will unlock the page.
- ->map_pages() is called when VM asks to map easy accessible pages.
+->map_pages() is called when VM asks to map easy accessible pages.
Filesystem should find and map pages associated with offsets from "start_pgoff"
till "end_pgoff". ->map_pages() is called with page table locked and must
not block. If it's not possible to reach a page without blocking,
@@ -551,25 +639,26 @@ page table entry. Pointer to entry associated with the page is passed in
"pte" field in vm_fault structure. Pointers to entries for other offsets
should be calculated relative to "pte".
- ->page_mkwrite() is called when a previously read-only pte is
+->page_mkwrite() is called when a previously read-only pte is
about to become writeable. The filesystem again must ensure that there are
no truncate/invalidate races, and then return with the page locked. If
the page has been truncated, the filesystem should not look up a new page
like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which
will cause the VM to retry the fault.
- ->pfn_mkwrite() is the same as page_mkwrite but when the pte is
+->pfn_mkwrite() is the same as page_mkwrite but when the pte is
VM_PFNMAP or VM_MIXEDMAP with a page-less entry. Expected return is
VM_FAULT_NOPAGE. Or one of the VM_FAULT_ERROR types. The default behavior
after this call is to make the pte read-write, unless pfn_mkwrite returns
an error.
- ->access() is called when get_user_pages() fails in
+->access() is called when get_user_pages() fails in
access_process_vm(), typically used to debug a process through
/proc/pid/mem or ptrace. This function is needed only for
VM_IO | VM_PFNMAP VMAs.
-================================================================================
+--------------------------------------------------------------------------------
+
Dubious stuff
(if you break something or notice that it is broken and do not fix it yourself
diff --git a/Documentation/filesystems/nfs/Exporting b/Documentation/filesystems/nfs/exporting.rst
similarity index 91%
rename from Documentation/filesystems/nfs/Exporting
rename to Documentation/filesystems/nfs/exporting.rst
index 63889149f532..33d588a01ace 100644
--- a/Documentation/filesystems/nfs/Exporting
+++ b/Documentation/filesystems/nfs/exporting.rst
@@ -1,3 +1,4 @@
+:orphan:
Making Filesystems Exportable
=============================
@@ -42,9 +43,9 @@ filehandle fragment, there is no automatic creation of a path prefix
for the object. This leads to two related but distinct features of
the dcache that are not needed for normal filesystem access.
-1/ The dcache must sometimes contain objects that are not part of the
+1. The dcache must sometimes contain objects that are not part of the
proper prefix. i.e that are not connected to the root.
-2/ The dcache must be prepared for a newly found (via ->lookup) directory
+2. The dcache must be prepared for a newly found (via ->lookup) directory
to already have a (non-connected) dentry, and must be able to move
that dentry into place (based on the parent and name in the
->lookup). This is particularly needed for directories as
@@ -52,7 +53,7 @@ the dcache that are not needed for normal filesystem access.
To implement these features, the dcache has:
-a/ A dentry flag DCACHE_DISCONNECTED which is set on
+a. A dentry flag DCACHE_DISCONNECTED which is set on
any dentry that might not be part of the proper prefix.
This is set when anonymous dentries are created, and cleared when a
dentry is noticed to be a child of a dentry which is in the proper
@@ -71,48 +72,52 @@ a/ A dentry flag DCACHE_DISCONNECTED which is set on
dentries. That guarantees that we won't need to hunt them down upon
umount.
-b/ A primitive for creation of secondary roots - d_obtain_root(inode).
+b. A primitive for creation of secondary roots - d_obtain_root(inode).
Those do _not_ bear DCACHE_DISCONNECTED. They are placed on the
per-superblock list (->s_roots), so they can be located at umount
time for eviction purposes.
-c/ Helper routines to allocate anonymous dentries, and to help attach
+c. Helper routines to allocate anonymous dentries, and to help attach
loose directory dentries at lookup time. They are:
+
d_obtain_alias(inode) will return a dentry for the given inode.
If the inode already has a dentry, one of those is returned.
+
If it doesn't, a new anonymous (IS_ROOT and
- DCACHE_DISCONNECTED) dentry is allocated and attached.
+ DCACHE_DISCONNECTED) dentry is allocated and attached.
+
In the case of a directory, care is taken that only one dentry
can ever be attached.
+
d_splice_alias(inode, dentry) will introduce a new dentry into the tree;
either the passed-in dentry or a preexisting alias for the given inode
(such as an anonymous one created by d_obtain_alias), if appropriate.
It returns NULL when the passed-in dentry is used, following the calling
convention of ->lookup.
-
+
Filesystem Issues
-----------------
For a filesystem to be exportable it must:
-
- 1/ provide the filehandle fragment routines described below.
- 2/ make sure that d_splice_alias is used rather than d_add
+
+ 1. provide the filehandle fragment routines described below.
+ 2. make sure that d_splice_alias is used rather than d_add
when ->lookup finds an inode for a given parent and name.
- If inode is NULL, d_splice_alias(inode, dentry) is equivalent to
+ If inode is NULL, d_splice_alias(inode, dentry) is equivalent to::
d_add(dentry, inode), NULL
Similarly, d_splice_alias(ERR_PTR(err), dentry) = ERR_PTR(err)
- Typically the ->lookup routine will simply end with a:
+ Typically the ->lookup routine will simply end with a::
return d_splice_alias(inode, dentry);
}
- A file system implementation declares that instances of the filesystem
+A file system implementation declares that instances of the filesystem
are exportable by setting the s_export_op field in the struct
super_block. This field must point to a "struct export_operations"
struct which has the following members:
diff --git a/Documentation/filesystems/vfs.rst b/Documentation/filesystems/vfs.rst
index 0f85ab21c2ca..7d4d09dd5e6d 100644
--- a/Documentation/filesystems/vfs.rst
+++ b/Documentation/filesystems/vfs.rst
@@ -20,7 +20,7 @@ kernel which allows different filesystem implementations to coexist.
VFS system calls open(2), stat(2), read(2), write(2), chmod(2) and so on
are called from a process context. Filesystem locking is described in
-the document Documentation/filesystems/Locking.
+the document Documentation/filesystems/locking.rst.
Directory Entry Cache (dcache)
diff --git a/fs/cifs/export.c b/fs/cifs/export.c
index ce8b7f677c58..eb0bb8ca8e63 100644
--- a/fs/cifs/export.c
+++ b/fs/cifs/export.c
@@ -24,7 +24,7 @@
*/
/*
- * See Documentation/filesystems/nfs/Exporting
+ * See Documentation/filesystems/nfs/exporting.rst
* and examples in fs/exportfs
*
* Since cifs is a network file system, an "fsid" must be included for
diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c
index f0e549783caf..09bc68708d28 100644
--- a/fs/exportfs/expfs.c
+++ b/fs/exportfs/expfs.c
@@ -7,7 +7,7 @@
* and for mapping back from file handles to dentries.
*
* For details on why we do all the strange and hairy things in here
- * take a look at Documentation/filesystems/nfs/Exporting.
+ * take a look at Documentation/filesystems/nfs/exporting.rst.
*/
#include <linux/exportfs.h>
#include <linux/fs.h>
diff --git a/fs/isofs/export.c b/fs/isofs/export.c
index 85a9093769a9..35768a63fb1d 100644
--- a/fs/isofs/export.c
+++ b/fs/isofs/export.c
@@ -10,7 +10,7 @@
*
* The following files are helpful:
*
- * Documentation/filesystems/nfs/Exporting
+ * Documentation/filesystems/nfs/exporting.rst
* fs/exportfs/expfs.c.
*/
diff --git a/fs/orangefs/file.c b/fs/orangefs/file.c
index 960f9a3c012d..a5612abc0936 100644
--- a/fs/orangefs/file.c
+++ b/fs/orangefs/file.c
@@ -555,7 +555,7 @@ static int orangefs_fsync(struct file *file,
* Change the file pointer position for an instance of an open file.
*
* \note If .llseek is overriden, we must acquire lock as described in
- * Documentation/filesystems/Locking.
+ * Documentation/filesystems/locking.rst.
*
* Future upgrade could support SEEK_DATA and SEEK_HOLE but would
* require much changes to the FS
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 9451011ac014..10090f11ab95 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -151,7 +151,7 @@ struct dentry_operations {
/*
* Locking rules for dentry_operations callbacks are to be found in
- * Documentation/filesystems/Locking. Keep it updated!
+ * Documentation/filesystems/locking.rst. Keep it updated!
*
* FUrther descriptions are found in Documentation/filesystems/vfs.rst.
* Keep it updated too!
diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h
index 0d3037419bc7..cf6571fc9c01 100644
--- a/include/linux/exportfs.h
+++ b/include/linux/exportfs.h
@@ -139,7 +139,7 @@ struct fid {
* @get_parent: find the parent of a given directory
* @commit_metadata: commit metadata changes to stable storage
*
- * See Documentation/filesystems/nfs/Exporting for details on how to use
+ * See Documentation/filesystems/nfs/exporting.rst for details on how to use
* this interface correctly.
*
* encode_fh:
--
2.21.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-07-22 11:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-22 11:07 [PATCH 00/22] ReST conversion of text files without .txt extension Mauro Carvalho Chehab
2019-07-22 11:07 ` [PATCH 12/22] docs: fs: cifs: convert to ReST and add to admin-guide book Mauro Carvalho Chehab
2019-07-22 11:07 ` [PATCH 13/22] docs: fs: convert docs without extension to ReST Mauro Carvalho Chehab
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).