From: longli@linuxonhyperv.com
To: Steve French <sfrench@samba.org>,
linux-cifs@vger.kernel.org, samba-technical@lists.samba.org,
linux-kernel@vger.kernel.org
Cc: Long Li <longli@microsoft.com>
Subject: [PATCH] cifs: smbd: Calculate the correct maximum packet size for segmented SMBDirect send/receive
Date: Wed, 25 Mar 2020 12:30:14 -0700 [thread overview]
Message-ID: <1585164614-123696-1-git-send-email-longli@linuxonhyperv.com> (raw)
From: Long Li <longli@microsoft.com>
The packet size needs to take account of SMB2 header size and possible
encryption header size. This is only done when signing is used and it is for
RDMA send/receive, not read/write.
Also remove the dead SMBD code in smb2_negotiate_r(w)size.
Signed-off-by: Long Li <longli@microsoft.com>
---
fs/cifs/smb2ops.c | 38 ++++++++++++++++----------------------
fs/cifs/smbdirect.c | 3 +--
2 files changed, 17 insertions(+), 24 deletions(-)
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 4c0922596467..9043d34eef43 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -332,16 +332,6 @@ smb2_negotiate_wsize(struct cifs_tcon *tcon, struct smb_vol *volume_info)
/* start with specified wsize, or default */
wsize = volume_info->wsize ? volume_info->wsize : CIFS_DEFAULT_IOSIZE;
wsize = min_t(unsigned int, wsize, server->max_write);
-#ifdef CONFIG_CIFS_SMB_DIRECT
- if (server->rdma) {
- if (server->sign)
- wsize = min_t(unsigned int,
- wsize, server->smbd_conn->max_fragmented_send_size);
- else
- wsize = min_t(unsigned int,
- wsize, server->smbd_conn->max_readwrite_size);
- }
-#endif
if (!(server->capabilities & SMB2_GLOBAL_CAP_LARGE_MTU))
wsize = min_t(unsigned int, wsize, SMB2_MAX_BUFFER_SIZE);
@@ -360,8 +350,15 @@ smb3_negotiate_wsize(struct cifs_tcon *tcon, struct smb_vol *volume_info)
#ifdef CONFIG_CIFS_SMB_DIRECT
if (server->rdma) {
if (server->sign)
+ /*
+ * Account for SMB2 data transfer packet header
+ * SMB2_READ/SMB2_WRITE (49) and possible encryption
+ * headers
+ */
wsize = min_t(unsigned int,
- wsize, server->smbd_conn->max_fragmented_send_size);
+ wsize,
+ server->smbd_conn->max_fragmented_send_size -
+ 49 - sizeof(struct smb2_transform_hdr));
else
wsize = min_t(unsigned int,
wsize, server->smbd_conn->max_readwrite_size);
@@ -382,16 +379,6 @@ smb2_negotiate_rsize(struct cifs_tcon *tcon, struct smb_vol *volume_info)
/* start with specified rsize, or default */
rsize = volume_info->rsize ? volume_info->rsize : CIFS_DEFAULT_IOSIZE;
rsize = min_t(unsigned int, rsize, server->max_read);
-#ifdef CONFIG_CIFS_SMB_DIRECT
- if (server->rdma) {
- if (server->sign)
- rsize = min_t(unsigned int,
- rsize, server->smbd_conn->max_fragmented_recv_size);
- else
- rsize = min_t(unsigned int,
- rsize, server->smbd_conn->max_readwrite_size);
- }
-#endif
if (!(server->capabilities & SMB2_GLOBAL_CAP_LARGE_MTU))
rsize = min_t(unsigned int, rsize, SMB2_MAX_BUFFER_SIZE);
@@ -411,8 +398,15 @@ smb3_negotiate_rsize(struct cifs_tcon *tcon, struct smb_vol *volume_info)
#ifdef CONFIG_CIFS_SMB_DIRECT
if (server->rdma) {
if (server->sign)
+ /*
+ * Account for SMB2 data transfer packet header
+ * SMB2_READ/SMB2_WRITE (49) and possible encryption
+ * headers
+ */
rsize = min_t(unsigned int,
- rsize, server->smbd_conn->max_fragmented_recv_size);
+ rsize,
+ server->smbd_conn->max_fragmented_recv_size -
+ 49 - sizeof(struct smb2_transform_hdr));
else
rsize = min_t(unsigned int,
rsize, server->smbd_conn->max_readwrite_size);
diff --git a/fs/cifs/smbdirect.c b/fs/cifs/smbdirect.c
index eb1e40af9f3a..0327b575ab87 100644
--- a/fs/cifs/smbdirect.c
+++ b/fs/cifs/smbdirect.c
@@ -2097,8 +2097,7 @@ int smbd_send(struct TCP_Server_Info *server,
for (i = 0; i < num_rqst; i++)
remaining_data_length += smb_rqst_len(server, &rqst_array[i]);
- if (remaining_data_length + sizeof(struct smbd_data_transfer) >
- info->max_fragmented_send_size) {
+ if (remaining_data_length > info->max_fragmented_send_size) {
log_write(ERR, "payload size %d > max size %d\n",
remaining_data_length, info->max_fragmented_send_size);
rc = -EINVAL;
--
2.17.1
next reply other threads:[~2020-03-25 19:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-25 19:30 longli [this message]
2020-03-26 2:02 ` [PATCH] cifs: smbd: Calculate the correct maximum packet size for segmented SMBDirect send/receive ronnie sahlberg
2020-03-26 2:43 ` Long Li
2020-03-26 3:03 ` ronnie sahlberg
2020-03-26 3:08 ` Long Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1585164614-123696-1-git-send-email-longli@linuxonhyperv.com \
--to=longli@linuxonhyperv.com \
--cc=linux-cifs@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=longli@microsoft.com \
--cc=samba-technical@lists.samba.org \
--cc=sfrench@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).