From: "Atte Heikkilä" <atteh.mailbox@gmail.com>
To: linux-cifs@vger.kernel.org
Cc: linkinjeon@kernel.org, "Atte Heikkilä" <atteh.mailbox@gmail.com>
Subject: [PATCH v2] ksmbd: make utf-8 file name comparison work in __caseless_lookup()
Date: Wed, 28 Sep 2022 00:57:21 +0300 [thread overview]
Message-ID: <20220927215721.328425-1-atteh.mailbox@gmail.com> (raw)
Case-insensitive file name lookups with __caseless_lookup() use
strncasecmp() for file name comparison. strncasecmp() assumes an
ISO8859-1-compatible encoding, which is not the case here as UTF-8
is always used. As such, use of strncasecmp() here produces correct
results only if both strings use characters in the ASCII range only.
Fix this by using utf8_strncasecmp() if CONFIG_UNICODE is set. On
failure or if CONFIG_UNICODE is not set, fallback to strncasecmp().
Also, as we are adding an include for `linux/unicode.h', include it
in `fs/ksmbd/connection.h' as well since it should be explicit there.
Signed-off-by: Atte Heikkilä <atteh.mailbox@gmail.com>
---
v2:
- simplified fallback condition by initializing `cmp'
fs/ksmbd/connection.h | 1 +
fs/ksmbd/vfs.c | 20 +++++++++++++++++---
fs/ksmbd/vfs.h | 2 ++
3 files changed, 20 insertions(+), 3 deletions(-)
diff --git a/fs/ksmbd/connection.h b/fs/ksmbd/connection.h
index 41d96f5cef06..3643354a3fa7 100644
--- a/fs/ksmbd/connection.h
+++ b/fs/ksmbd/connection.h
@@ -14,6 +14,7 @@
#include <net/request_sock.h>
#include <linux/kthread.h>
#include <linux/nls.h>
+#include <linux/unicode.h>
#include "smb_common.h"
#include "ksmbd_work.h"
diff --git a/fs/ksmbd/vfs.c b/fs/ksmbd/vfs.c
index 4fcf96a01c16..8d8af724df70 100644
--- a/fs/ksmbd/vfs.c
+++ b/fs/ksmbd/vfs.c
@@ -1145,12 +1145,23 @@ static int __caseless_lookup(struct dir_context *ctx, const char *name,
unsigned int d_type)
{
struct ksmbd_readdir_data *buf;
+ int cmp = -EINVAL;
buf = container_of(ctx, struct ksmbd_readdir_data, ctx);
if (buf->used != namlen)
return 0;
- if (!strncasecmp((char *)buf->private, name, namlen)) {
+ if (IS_ENABLED(CONFIG_UNICODE) && buf->um) {
+ const struct qstr q_buf = {.name = buf->private,
+ .len = buf->used};
+ const struct qstr q_name = {.name = name,
+ .len = namlen};
+
+ cmp = utf8_strncasecmp(buf->um, &q_buf, &q_name);
+ }
+ if (cmp < 0)
+ cmp = strncasecmp((char *)buf->private, name, namlen);
+ if (!cmp) {
memcpy((char *)buf->private, name, namlen);
buf->dirent_count = 1;
return -EEXIST;
@@ -1166,7 +1177,8 @@ static int __caseless_lookup(struct dir_context *ctx, const char *name,
*
* Return: 0 on success, otherwise error
*/
-static int ksmbd_vfs_lookup_in_dir(const struct path *dir, char *name, size_t namelen)
+static int ksmbd_vfs_lookup_in_dir(const struct path *dir, char *name,
+ size_t namelen, struct unicode_map *um)
{
int ret;
struct file *dfilp;
@@ -1176,6 +1188,7 @@ static int ksmbd_vfs_lookup_in_dir(const struct path *dir, char *name, size_t na
.private = name,
.used = namelen,
.dirent_count = 0,
+ .um = um,
};
dfilp = dentry_open(dir, flags, current_cred());
@@ -1238,7 +1251,8 @@ int ksmbd_vfs_kern_path(struct ksmbd_work *work, char *name,
break;
err = ksmbd_vfs_lookup_in_dir(&parent, filename,
- filename_len);
+ filename_len,
+ work->conn->um);
path_put(&parent);
if (err)
goto out;
diff --git a/fs/ksmbd/vfs.h b/fs/ksmbd/vfs.h
index d7542a2dab52..593059ca8511 100644
--- a/fs/ksmbd/vfs.h
+++ b/fs/ksmbd/vfs.h
@@ -12,6 +12,7 @@
#include <linux/namei.h>
#include <uapi/linux/xattr.h>
#include <linux/posix_acl.h>
+#include <linux/unicode.h>
#include "smbacl.h"
#include "xattr.h"
@@ -60,6 +61,7 @@ struct ksmbd_readdir_data {
unsigned int used;
unsigned int dirent_count;
unsigned int file_attr;
+ struct unicode_map *um;
};
/* ksmbd kstat wrapper to get valid create time when reading dir entry */
--
2.37.3
next reply other threads:[~2022-09-27 21:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-27 21:57 Atte Heikkilä [this message]
2022-09-28 13:28 ` [PATCH v2] ksmbd: make utf-8 file name comparison work in __caseless_lookup() Namjae Jeon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220927215721.328425-1-atteh.mailbox@gmail.com \
--to=atteh.mailbox@gmail.com \
--cc=linkinjeon@kernel.org \
--cc=linux-cifs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).