Linux-Clk Archive on lore.kernel.org
 help / Atom feed
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: mazziesaccount@gmail.com, matti.vaittinen@fi.rohmeurope.com
Cc: heikki.haikola@fi.rohmeurope.com,
	mikko.mutanen@fi.rohmeurope.com, lee.jones@linaro.org,
	robh+dt@kernel.org, mark.rutland@arm.com, broonie@kernel.org,
	gregkh@linuxfoundation.org, rafael@kernel.org,
	mturquette@baylibre.com, sboyd@kernel.org,
	linus.walleij@linaro.org, bgolaszewski@baylibre.com,
	sre@kernel.org, lgirdwood@gmail.com, a.zummo@towertech.it,
	alexandre.belloni@bootlin.com, wim@linux-watchdog.org,
	linux@roeck-us.net, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-rtc@vger.kernel.org, linux-watchdog@vger.kernel.org
Subject: [PATCH v6 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts
Date: Tue, 5 Feb 2019 11:04:27 +0200
Message-ID: <0f5a3b94f936556c1ad05da58bfb35182ae20a96.1549356505.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1549356505.git.matti.vaittinen@fi.rohmeurope.com>

Split the bd718x7.h to ROHM common and bd718x7 specific parts
so that we do not need to add same things in every new ROHM
PMIC header. Please note that this change requires changes also
in bd718x7 sub-device drivers for regulators and clk.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
 drivers/mfd/rohm-bd718x7.c       | 23 ++++++++++++-----------
 include/linux/mfd/rohm-bd718x7.h | 22 ++++++++--------------
 include/linux/mfd/rohm-generic.h | 20 ++++++++++++++++++++
 3 files changed, 40 insertions(+), 25 deletions(-)
 create mode 100644 include/linux/mfd/rohm-generic.h

diff --git a/drivers/mfd/rohm-bd718x7.c b/drivers/mfd/rohm-bd718x7.c
index a29d529a96f4..7beb444a57cb 100644
--- a/drivers/mfd/rohm-bd718x7.c
+++ b/drivers/mfd/rohm-bd718x7.c
@@ -98,18 +98,19 @@ static int bd718xx_i2c_probe(struct i2c_client *i2c,
 		return -ENOMEM;
 
 	bd718xx->chip_irq = i2c->irq;
-	bd718xx->chip_type = (unsigned int)(uintptr_t)
+	bd718xx->chip.chip_type = (unsigned int)(uintptr_t)
 				of_device_get_match_data(&i2c->dev);
-	bd718xx->dev = &i2c->dev;
+	bd718xx->chip.dev = &i2c->dev;
 	dev_set_drvdata(&i2c->dev, bd718xx);
 
-	bd718xx->regmap = devm_regmap_init_i2c(i2c, &bd718xx_regmap_config);
-	if (IS_ERR(bd718xx->regmap)) {
+	bd718xx->chip.regmap = devm_regmap_init_i2c(i2c,
+						    &bd718xx_regmap_config);
+	if (IS_ERR(bd718xx->chip.regmap)) {
 		dev_err(&i2c->dev, "regmap initialization failed\n");
-		return PTR_ERR(bd718xx->regmap);
+		return PTR_ERR(bd718xx->chip.regmap);
 	}
 
-	ret = devm_regmap_add_irq_chip(&i2c->dev, bd718xx->regmap,
+	ret = devm_regmap_add_irq_chip(&i2c->dev, bd718xx->chip.regmap,
 				       bd718xx->chip_irq, IRQF_ONESHOT, 0,
 				       &bd718xx_irq_chip, &bd718xx->irq_data);
 	if (ret) {
@@ -118,7 +119,7 @@ static int bd718xx_i2c_probe(struct i2c_client *i2c,
 	}
 
 	/* Configure short press to 10 milliseconds */
-	ret = regmap_update_bits(bd718xx->regmap,
+	ret = regmap_update_bits(bd718xx->chip.regmap,
 				 BD718XX_REG_PWRONCONFIG0,
 				 BD718XX_PWRBTN_PRESS_DURATION_MASK,
 				 BD718XX_PWRBTN_SHORT_PRESS_10MS);
@@ -129,7 +130,7 @@ static int bd718xx_i2c_probe(struct i2c_client *i2c,
 	}
 
 	/* Configure long press to 10 seconds */
-	ret = regmap_update_bits(bd718xx->regmap,
+	ret = regmap_update_bits(bd718xx->chip.regmap,
 				 BD718XX_REG_PWRONCONFIG1,
 				 BD718XX_PWRBTN_PRESS_DURATION_MASK,
 				 BD718XX_PWRBTN_LONG_PRESS_10S);
@@ -149,7 +150,7 @@ static int bd718xx_i2c_probe(struct i2c_client *i2c,
 
 	button.irq = ret;
 
-	ret = devm_mfd_add_devices(bd718xx->dev, PLATFORM_DEVID_AUTO,
+	ret = devm_mfd_add_devices(bd718xx->chip.dev, PLATFORM_DEVID_AUTO,
 				   bd718xx_mfd_cells,
 				   ARRAY_SIZE(bd718xx_mfd_cells), NULL, 0,
 				   regmap_irq_get_domain(bd718xx->irq_data));
@@ -162,11 +163,11 @@ static int bd718xx_i2c_probe(struct i2c_client *i2c,
 static const struct of_device_id bd718xx_of_match[] = {
 	{
 		.compatible = "rohm,bd71837",
-		.data = (void *)BD718XX_TYPE_BD71837,
+		.data = (void *)ROHM_CHIP_TYPE_BD71837,
 	},
 	{
 		.compatible = "rohm,bd71847",
-		.data = (void *)BD718XX_TYPE_BD71847,
+		.data = (void *)ROHM_CHIP_TYPE_BD71847,
 	},
 	{ }
 };
diff --git a/include/linux/mfd/rohm-bd718x7.h b/include/linux/mfd/rohm-bd718x7.h
index fd194bfc836f..7f2dbde402a1 100644
--- a/include/linux/mfd/rohm-bd718x7.h
+++ b/include/linux/mfd/rohm-bd718x7.h
@@ -4,14 +4,9 @@
 #ifndef __LINUX_MFD_BD718XX_H__
 #define __LINUX_MFD_BD718XX_H__
 
+#include <linux/mfd/rohm-generic.h>
 #include <linux/regmap.h>
 
-enum {
-	BD718XX_TYPE_BD71837 = 0,
-	BD718XX_TYPE_BD71847,
-	BD718XX_TYPE_AMOUNT
-};
-
 enum {
 	BD718XX_BUCK1 = 0,
 	BD718XX_BUCK2,
@@ -321,18 +316,17 @@ enum {
 	BD718XX_PWRBTN_LONG_PRESS_15S
 };
 
-struct bd718xx_clk;
-
 struct bd718xx {
-	unsigned int chip_type;
-	struct device *dev;
-	struct regmap *regmap;
-	unsigned long int id;
+	/*
+	 * Please keep this as the first member here as some
+	 * drivers (clk) supporting more than one chip may only know this
+	 * generic struct 'struct rohm_regmap_dev' and assume it is
+	 * the first chunk of parent device's private data.
+	 */
+	struct rohm_regmap_dev chip;
 
 	int chip_irq;
 	struct regmap_irq_chip_data *irq_data;
-
-	struct bd718xx_clk *clk;
 };
 
 #endif /* __LINUX_MFD_BD718XX_H__ */
diff --git a/include/linux/mfd/rohm-generic.h b/include/linux/mfd/rohm-generic.h
new file mode 100644
index 000000000000..bff15ac26f2c
--- /dev/null
+++ b/include/linux/mfd/rohm-generic.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright (C) 2018 ROHM Semiconductors */
+
+#ifndef __LINUX_MFD_ROHM_H__
+#define __LINUX_MFD_ROHM_H__
+
+enum {
+	ROHM_CHIP_TYPE_BD71837 = 0,
+	ROHM_CHIP_TYPE_BD71847,
+	ROHM_CHIP_TYPE_BD70528,
+	ROHM_CHIP_TYPE_AMOUNT
+};
+
+struct rohm_regmap_dev {
+	unsigned int chip_type;
+	struct device *dev;
+	struct regmap *regmap;
+};
+
+#endif
-- 
2.14.3


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes.  Just then, he vanished ~~~

  reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-05  9:03 [PATCH v6 00/10] support ROHM BD70528 PMIC Matti Vaittinen
2019-02-05  9:04 ` Matti Vaittinen [this message]
2019-02-05  9:04 ` [PATCH v6 02/10] regulator: bd718x7 use chip specific and generic data structs Matti Vaittinen
2019-02-05  9:05 ` [PATCH v6 03/10] clk: bd718x7: " Matti Vaittinen
2019-02-05  9:05 ` [PATCH v6 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core Matti Vaittinen
2019-02-05  9:05 ` [PATCH v6 05/10] clk: bd718x7: Support ROHM BD70528 clk block Matti Vaittinen
2019-02-05  9:06 ` [PATCH v6 06/10] devicetree: bindings: Document first ROHM BD70528 bindings Matti Vaittinen
2019-02-05  9:06 ` [PATCH v6 07/10] gpio: Initial support for ROHM bd70528 GPIO block Matti Vaittinen
2019-02-05  9:07 ` [PATCH v6 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC Matti Vaittinen
2019-02-05  9:07 ` [PATCH v6 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block Matti Vaittinen
2019-02-05  9:09 ` [PATCH v6 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block Matti Vaittinen
2019-02-05 15:14   ` Guenter Roeck

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0f5a3b94f936556c1ad05da58bfb35182ae20a96.1549356505.git.matti.vaittinen@fi.rohmeurope.com \
    --to=matti.vaittinen@fi.rohmeurope.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.haikola@fi.rohmeurope.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=mazziesaccount@gmail.com \
    --cc=mikko.mutanen@fi.rohmeurope.com \
    --cc=mturquette@baylibre.com \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sre@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org linux-clk@archiver.kernel.org
	public-inbox-index linux-clk


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/ public-inbox