linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Mike Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, Jason Cooper <jason@lakedaemon.net>,
	Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Gregory CLEMENT <gregory.clement@free-electrons.com>,
	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
	linux-arm-kernel@lists.infradead.org,
	Nadav Haklai <nadavh@marvell.com>, Victor Gu <xigu@marvell.com>,
	Romain Perier <romain.perier@free-electrons.com>,
	Omri Itach <omrii@marvell.com>, Marcin Wojtas <mw@semihalf.com>,
	Wilson Ding <dingwei@marvell.com>, Hua Jing <jinghua@marvell.com>,
	Terry Zhou <bjzhou@marvell.com>
Subject: [PATCH v2 2/6] clk: mvebu: Add the xtal clock for Armada 3700 SoC
Date: Fri,  8 Jul 2016 00:37:47 +0200	[thread overview]
Message-ID: <1467931071-31004-3-git-send-email-gregory.clement@free-electrons.com> (raw)
In-Reply-To: <1467931071-31004-1-git-send-email-gregory.clement@free-electrons.com>

This clock is the parent of all the Armada 3700 clocks. It is a fixed
rate clock which depends on the gpio configuration read when resetting
the SoC.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/clk/mvebu/Kconfig            |  3 ++
 drivers/clk/mvebu/Makefile           |  1 +
 drivers/clk/mvebu/armada-37xx-xtal.c | 98 ++++++++++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+)
 create mode 100644 drivers/clk/mvebu/armada-37xx-xtal.c

diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig
index 3165da77d525..fddc8ac5faff 100644
--- a/drivers/clk/mvebu/Kconfig
+++ b/drivers/clk/mvebu/Kconfig
@@ -24,6 +24,9 @@ config ARMADA_39X_CLK
 	bool
 	select MVEBU_CLK_COMMON
 
+config ARMADA_37XX_CLK
+       bool
+
 config ARMADA_XP_CLK
 	bool
 	select MVEBU_CLK_COMMON
diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile
index 7172ef65693d..4257a36d0219 100644
--- a/drivers/clk/mvebu/Makefile
+++ b/drivers/clk/mvebu/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_ARMADA_370_CLK)	+= armada-370.o
 obj-$(CONFIG_ARMADA_375_CLK)	+= armada-375.o
 obj-$(CONFIG_ARMADA_38X_CLK)	+= armada-38x.o
 obj-$(CONFIG_ARMADA_39X_CLK)	+= armada-39x.o
+obj-$(CONFIG_ARMADA_37XX_CLK)	+= armada-37xx-xtal.o
 obj-$(CONFIG_ARMADA_XP_CLK)	+= armada-xp.o
 obj-$(CONFIG_ARMADA_AP806_SYSCON) += ap806-system-controller.o
 obj-$(CONFIG_ARMADA_CP110_SYSCON) += cp110-system-controller.o
diff --git a/drivers/clk/mvebu/armada-37xx-xtal.c b/drivers/clk/mvebu/armada-37xx-xtal.c
new file mode 100644
index 000000000000..f832c219420f
--- /dev/null
+++ b/drivers/clk/mvebu/armada-37xx-xtal.c
@@ -0,0 +1,98 @@
+/*
+ * Marvell Armada 37xx SoC xtal clocks
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define NB_GPIO1_LATCH	0xC
+#define XTAL_MODE	    BIT(31)
+
+static int armada_3700_xtal_clock_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const char *xtal_name = "xtal";
+	struct device_node *parent;
+	struct regmap *regmap;
+	struct clk_hw *xtal_hw;
+	unsigned int rate;
+	u32 reg;
+	int ret;
+
+	xtal_hw = devm_kzalloc(&pdev->dev, sizeof(*xtal_hw), GFP_KERNEL);
+	if (!xtal_hw)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, xtal_hw);
+
+	parent = np->parent;
+	if (!parent) {
+		dev_err(&pdev->dev, "no parent\n");
+		return -ENODEV;
+	}
+
+	regmap = syscon_node_to_regmap(parent);
+	if (IS_ERR(regmap)) {
+		dev_err(&pdev->dev, "cannot get regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	ret = regmap_read(regmap, NB_GPIO1_LATCH, &reg);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot read from regmap\n");
+		return ret;
+	}
+
+	if (reg & XTAL_MODE)
+		rate = 40000000;
+	else
+		rate = 25000000;
+
+	of_property_read_string_index(np, "clock-output-names", 0, &xtal_name);
+	xtal_hw = clk_hw_register_fixed_rate(NULL, xtal_name, NULL, 0, rate);
+	if (IS_ERR(xtal_hw))
+		return PTR_ERR(xtal_hw);
+	ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, xtal_hw);
+
+	return ret;
+}
+
+static int armada_3700_xtal_clock_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+
+	return 0;
+}
+
+static const struct of_device_id armada_3700_xtal_clock_of_match[] = {
+	{ .compatible = "marvell,armada-3700-xtal-clock", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, armada_3700_xtal_clock_of_match);
+
+static struct platform_driver armada_3700_xtal_clock_driver = {
+	.probe = armada_3700_xtal_clock_probe,
+	.remove = armada_3700_xtal_clock_remove,
+	.driver		= {
+		.name	= "marvell-armada-3700-xtal-clock",
+		.of_match_table = armada_3700_xtal_clock_of_match,
+	},
+};
+
+module_platform_driver(armada_3700_xtal_clock_driver);
+
+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell Armada 37xx SoC xtal clocks driver");
+MODULE_LICENSE("GPL v2");
-- 
2.5.0

  parent reply	other threads:[~2016-07-07 22:37 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-07 22:37 [PATCH v2 0/6] Add clock support for Armada 37xx SoCs Gregory CLEMENT
2016-07-07 22:37 ` [PATCH v2 1/6] dt-bindings: clock: add DT binding for the Xtal clock on Armada 3700 Gregory CLEMENT
2016-07-08  7:31   ` Thomas Petazzoni
2016-07-11 16:12     ` Gregory CLEMENT
2016-07-07 22:37 ` Gregory CLEMENT [this message]
2016-07-08 17:32   ` [PATCH v2 2/6] clk: mvebu: Add the xtal clock for Armada 3700 SoC Michael Turquette
2016-07-12 10:42     ` Gregory CLEMENT
2016-07-09 23:34   ` Paul Gortmaker
2016-07-12 10:43     ` Gregory CLEMENT
2016-07-07 22:37 ` [PATCH v2 3/6] dt-bindings: clock: add DT binding for the TBG clocks on Armada 3700 Gregory CLEMENT
2016-07-07 22:37 ` [PATCH v2 4/6] clk: mvebu Add the time base generator clocks for " Gregory CLEMENT
2016-07-07 22:37 ` [PATCH v2 5/6] dt-bindings: clock: add DT binding for the peripheral clocks on " Gregory CLEMENT
2016-07-07 22:37 ` [PATCH v2 6/6] clk: mvebu: Add the peripheral clock driver for " Gregory CLEMENT
2016-07-08 18:27   ` Michael Turquette
2016-07-12 16:30     ` Gregory CLEMENT
2016-07-12 17:28       ` Michael Turquette

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467931071-31004-3-git-send-email-gregory.clement@free-electrons.com \
    --to=gregory.clement@free-electrons.com \
    --cc=andrew@lunn.ch \
    --cc=bjzhou@marvell.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dingwei@marvell.com \
    --cc=jason@lakedaemon.net \
    --cc=jinghua@marvell.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=mw@semihalf.com \
    --cc=nadavh@marvell.com \
    --cc=omrii@marvell.com \
    --cc=robh+dt@kernel.org \
    --cc=romain.perier@free-electrons.com \
    --cc=sboyd@codeaurora.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=thomas.petazzoni@free-electrons.com \
    --cc=xigu@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).