From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Gregory CLEMENT To: Mike Turquette , Stephen Boyd , linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Rob Herring , devicetree@vger.kernel.org, Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Gregory CLEMENT , Thomas Petazzoni , linux-arm-kernel@lists.infradead.org, Nadav Haklai , Victor Gu , Romain Perier , Omri Itach , Marcin Wojtas , Wilson Ding , Hua Jing , Terry Zhou Subject: [PATCH v2 5/6] dt-bindings: clock: add DT binding for the peripheral clocks on Armada 3700 Date: Fri, 8 Jul 2016 00:37:50 +0200 Message-Id: <1467931071-31004-6-git-send-email-gregory.clement@free-electrons.com> In-Reply-To: <1467931071-31004-1-git-send-email-gregory.clement@free-electrons.com> References: <1467931071-31004-1-git-send-email-gregory.clement@free-electrons.com> List-ID: This commit adds the DT binding documentation for the peripheral clocks used in the Marvell Armada 3700 SoCs. Signed-off-by: Gregory CLEMENT Acked-by: Rob Herring --- .../bindings/clock/armada3700-periph-clock.txt | 70 ++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt diff --git a/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt new file mode 100644 index 000000000000..1e3370ba189f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt @@ -0,0 +1,70 @@ +* Peripheral Clock bindings for Marvell Armada 37xx SoCs + +Marvell Armada 37xx SoCs provide peripheral clocks which are +used as clock source for the peripheral of the SoC. + +There are two different blocks associated to north bridge and south +bridge. + +The peripheral clock consumer should specify the desired clock by +having the clock ID in its "clocks" phandle cell. + +The following is a list of provided IDs for Armada 370 North bridge clocks: +ID Clock name Description +----------------------------------- +0 mmc MMC controller +1 sata_host Sata Host +2 sec_at Security AT +3 sac_dap Security DAP +4 tsecm Security Engine +5 setm_tmx Serial Embedded Trace Module +6 avs Adaptive Voltage Scaling +7 sqf SPI +8 pwm PWM +9 i2c_2 I2C 2 +10 i2c_1 I2C 1 +11 ddr_phy DDR PHY +12 ddr_fclk DDR F clock +13 trace Trace +14 counter Counter +15 eip97 EIP 97 +16 cpu CPU + +The following is a list of provided IDs for Armada 370 South bridge clocks: +ID Clock name Description +----------------------------------- +0 gbe-50 50 MHz parent clock for Gigabit Ethernet +1 gbe-core parent clock for Gigabit Ethernet core +2 gbe-125 125 MHz parent clock for Gigabit Ethernet +3 gbe1-50 50 MHz clock for Gigabit Ethernet port 1 +4 gbe0-50 50 MHz clock for Gigabit Ethernet port 0 +5 gbe1-125 125 MHz clock for Gigabit Ethernet port 1 +6 gbe0-125 125 MHz clock for Gigabit Ethernet port 0 +7 gbe1-core Gigabit Ethernet core port 1 +8 gbe0-core Gigabit Ethernet core port 0 +9 gbe-bm Gigabit Ethernet Buffer Manager +10 sdio SDIO +11 usb32-sub2-sys USB 2 clock +12 usb32-ss-sys USB 3 clock + +Required properties: + +- compatible : shall be "marvell,armada-3700-periph-clock-nb" for the + north bridge block, or + "marvell,armada-3700-periph-clock-sb" for the south bridge block +- reg : must be the register address of North/South Bridge Clock register +- #clock-cells : from common clock binding; shall be set to 1 + +- clocks : list of the parent clock phandle in the following order: + TBG-A P, TBG-B P, TBG-A S, TBG-B S and finally the xtal clock. + + +Example: + +nb_perih_clk: nb-periph-clk@13000{ + compatible = "marvell,armada-3700-periph-clock-nb"; + reg = <0x13000 0x1000>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, + <&tbg 3>, <&xtalclk>; + #clock-cells = <1>; +}; -- 2.5.0