Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Taniya Das <tdas@codeaurora.org>
To: Stephen Boyd <sboyd@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>
Cc: Andy Gross <andy.gross@linaro.org>,
	David Brown <david.brown@linaro.org>,
	Rajendra Nayak <rnayak@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	chandanu@codeaurora.org, Taniya Das <tdas@codeaurora.org>
Subject: [PATCH v1 1/2] clk: qcom: rcg2: Add support for display port clock ops
Date: Tue,  9 Oct 2018 19:27:46 +0530
Message-ID: <1539093467-12123-2-git-send-email-tdas@codeaurora.org> (raw)
In-Reply-To: <1539093467-12123-1-git-send-email-tdas@codeaurora.org>

New display port clock ops supported for display port clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/clk-rcg.h  |  1 +
 drivers/clk/qcom/clk-rcg2.c | 86 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 87 insertions(+)

diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
index e5eca8a..e0db0f7 100644
--- a/drivers/clk/qcom/clk-rcg.h
+++ b/drivers/clk/qcom/clk-rcg.h
@@ -162,6 +162,7 @@ struct clk_rcg2 {
 extern const struct clk_ops clk_pixel_ops;
 extern const struct clk_ops clk_gfx3d_ops;
 extern const struct clk_ops clk_rcg2_shared_ops;
+extern const struct clk_ops clk_dp_ops;

 struct clk_rcg_dfs_data {
 	struct clk_rcg2 *rcg;
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index 6e3bd19..ca6142f 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -10,6 +10,7 @@
 #include <linux/export.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
+#include <linux/rational.h>
 #include <linux/regmap.h>
 #include <linux/math64.h>
 #include <linux/slab.h>
@@ -1124,3 +1125,88 @@ int qcom_cc_register_rcg_dfs(struct regmap *regmap,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(qcom_cc_register_rcg_dfs);
+
+static int clk_rcg2_dp_set_rate(struct clk_hw *hw, unsigned long rate,
+			unsigned long parent_rate)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	struct freq_tbl f = { 0 };
+	unsigned long src_rate;
+	unsigned long num, den;
+	u32 mask = BIT(rcg->hid_width) - 1;
+	u32 hid_div, cfg;
+	int i, num_parents = clk_hw_get_num_parents(hw);
+
+	src_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
+	if (src_rate <= 0) {
+		pr_err("Invalid RCG parent rate\n");
+		return -EINVAL;
+	}
+
+	rational_best_approximation(src_rate, rate,
+			(unsigned long)(1 << 16) - 1,
+			(unsigned long)(1 << 16) - 1, &den, &num);
+
+	if (!num || !den) {
+		pr_err("Invalid MN values derived for requested rate %lu\n",
+							rate);
+		return -EINVAL;
+	}
+
+	regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &cfg);
+	hid_div = cfg;
+	cfg &= CFG_SRC_SEL_MASK;
+	cfg >>= CFG_SRC_SEL_SHIFT;
+
+	for (i = 0; i < num_parents; i++)
+		if (cfg == rcg->parent_map[i].cfg) {
+			f.src = rcg->parent_map[i].src;
+			break;
+	}
+
+	f.pre_div = hid_div;
+	f.pre_div >>= CFG_SRC_DIV_SHIFT;
+	f.pre_div &= mask;
+
+	if (num == den) {
+		f.m = 0;
+		f.n = 0;
+	} else {
+		f.m = num;
+		f.n = den;
+	}
+
+	return clk_rcg2_configure(rcg, &f);
+}
+
+static int clk_rcg2_dp_set_rate_and_parent(struct clk_hw *hw,
+		unsigned long rate, unsigned long parent_rate, u8 index)
+{
+	return clk_rcg2_dp_set_rate(hw, rate, parent_rate);
+}
+
+static int clk_rcg2_dp_determine_rate(struct clk_hw *hw,
+				struct clk_rate_request *req)
+{
+	if (!hw)
+		return -EINVAL;
+
+	if (!clk_hw_get_parent(hw)) {
+		pr_err("Missing the parent for the DP RCG\n");
+		return -EINVAL;
+	}
+
+	req->best_parent_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
+	return 0;
+}
+
+const struct clk_ops clk_dp_ops = {
+	.is_enabled = clk_rcg2_is_enabled,
+	.get_parent = clk_rcg2_get_parent,
+	.set_parent = clk_rcg2_set_parent,
+	.recalc_rate = clk_rcg2_recalc_rate,
+	.set_rate = clk_rcg2_dp_set_rate,
+	.set_rate_and_parent = clk_rcg2_dp_set_rate_and_parent,
+	.determine_rate = clk_rcg2_dp_determine_rate,
+};
+EXPORT_SYMBOL_GPL(clk_dp_ops);
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.


  reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-09 13:57 [PATCH v1 0/2] Add support for display port clocks and " Taniya Das
2018-10-09 13:57 ` Taniya Das [this message]
2018-10-09 20:46   ` [PATCH v1 1/2] clk: qcom: rcg2: Add support for display port " Stephen Boyd
2018-10-19 10:31     ` Taniya Das
2018-10-09 13:57 ` [PATCH v1 2/2] clk: qcom : dispcc: Add support for display port clocks Taniya Das
2018-10-09 20:34   ` Stephen Boyd
2018-10-19 10:34     ` Taniya Das
2018-10-28 10:34       ` Taniya Das
2018-10-29 18:43         ` Stephen Boyd
2018-10-30  6:01           ` Taniya Das
2018-10-30 16:33             ` Stephen Boyd
2018-11-01  5:02               ` Taniya Das
2018-11-06 17:08                 ` Stephen Boyd
2018-11-12  3:41                   ` chandanu
2019-02-02  0:05           ` chandanu
2019-07-15 22:59             ` Stephen Boyd

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1539093467-12123-2-git-send-email-tdas@codeaurora.org \
    --to=tdas@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=chandanu@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=rnayak@codeaurora.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org linux-clk@archiver.kernel.org
	public-inbox-index linux-clk


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/ public-inbox