From: Stefan Wahren <wahrenst@gmx.net>
To: Eric Anholt <eric@anholt.net>,
Florian Fainelli <f.fainelli@gmail.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Wolfram Sang <wsa@the-dreams.de>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: bcm-kernel-feedback-list@broadcom.com,
linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org,
linux-clk@vger.kernel.org, linux-rpi-kernel@lists.infradead.org,
devicetree@vger.kernel.org, Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH V2 09/13] dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema
Date: Tue, 13 Aug 2019 18:20:44 +0200 [thread overview]
Message-ID: <1565713248-4906-10-git-send-email-wahrenst@gmx.net> (raw)
In-Reply-To: <1565713248-4906-1-git-send-email-wahrenst@gmx.net>
Convert the BCM2835/6/7 SoC bindings to DT schema format using json-schema.
All the other Broadcom boards are maintained by Florian Fainelli.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Eric Anholt <eric@anholt.net>
---
.../devicetree/bindings/arm/bcm/bcm2835.yaml | 46 +++++++++++++++
.../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 67 ----------------------
2 files changed, 46 insertions(+), 67 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
new file mode 100644
index 0000000..1a4be26
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/bcm2835.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711/BCM2835 Platforms Device Tree Bindings
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+ - Stefan Wahren <wahrenst@gmx.net>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: BCM2835 based Boards
+ items:
+ - enum:
+ - raspberrypi,model-a
+ - raspberrypi,model-a-plus
+ - raspberrypi,model-b
+ - raspberrypi,model-b-i2c0 # Raspberry Pi Model B (no P5)
+ - raspberrypi,model-b-rev2
+ - raspberrypi,model-b-plus
+ - raspberrypi,compute-module
+ - raspberrypi,model-zero
+ - raspberrypi,model-zero-w
+ - const: brcm,bcm2835
+
+ - description: BCM2836 based Boards
+ items:
+ - enum:
+ - raspberrypi,2-model-b
+
+ - description: BCM2837 based Boards
+ items:
+ - enum:
+ - raspberrypi,3-model-a-plus
+ - raspberrypi,3-model-b
+ - raspberrypi,3-model-b-plus
+ - raspberrypi,3-compute-module
+ - raspberrypi,3-compute-module-lite
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
deleted file mode 100644
index 245328f..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-Broadcom BCM2835 device tree bindings
--------------------------------------------
-
-Raspberry Pi Model A
-Required root node properties:
-compatible = "raspberrypi,model-a", "brcm,bcm2835";
-
-Raspberry Pi Model A+
-Required root node properties:
-compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
-
-Raspberry Pi Model B
-Required root node properties:
-compatible = "raspberrypi,model-b", "brcm,bcm2835";
-
-Raspberry Pi Model B (no P5)
-early model B with I2C0 rather than I2C1 routed to the expansion header
-Required root node properties:
-compatible = "raspberrypi,model-b-i2c0", "brcm,bcm2835";
-
-Raspberry Pi Model B rev2
-Required root node properties:
-compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
-
-Raspberry Pi Model B+
-Required root node properties:
-compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
-
-Raspberry Pi 2 Model B
-Required root node properties:
-compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
-
-Raspberry Pi 3 Model A+
-Required root node properties:
-compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
-
-Raspberry Pi 3 Model B
-Required root node properties:
-compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
-
-Raspberry Pi 3 Model B+
-Required root node properties:
-compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
-
-Raspberry Pi Compute Module
-Required root node properties:
-compatible = "raspberrypi,compute-module", "brcm,bcm2835";
-
-Raspberry Pi Compute Module 3
-Required root node properties:
-compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
-
-Raspberry Pi Compute Module 3 Lite
-Required root node properties:
-compatible = "raspberrypi,3-compute-module-lite", "brcm,bcm2837";
-
-Raspberry Pi Zero
-Required root node properties:
-compatible = "raspberrypi,model-zero", "brcm,bcm2835";
-
-Raspberry Pi Zero W
-Required root node properties:
-compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
-
-Generic BCM2835 board
-Required root node properties:
-compatible = "brcm,bcm2835";
--
2.7.4
next prev parent reply other threads:[~2019-08-13 16:21 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-13 16:20 [PATCH V2 00/13] ARM: Add minimal Raspberry Pi 4 support Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 01/13] ARM: dts: bcm283x: Enable HDMI at board level Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 02/13] ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 03/13] dt-bindings: bcm2835-cprman: Add bcm2711 support Stefan Wahren
2019-08-16 17:41 ` Stephen Boyd
2019-08-27 16:00 ` Rob Herring
2019-08-13 16:20 ` [PATCH V2 04/13] clk: bcm2835: Introduce SoC specific clock registration Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 05/13] clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support Stefan Wahren
2019-09-12 17:24 ` Matthias Brugger
2019-09-12 18:52 ` Eric Anholt
2019-09-13 1:20 ` Stefan Wahren
2019-09-13 7:13 ` Matthias Brugger
2019-09-13 23:02 ` Florian Fainelli
2019-08-13 16:20 ` [PATCH V2 06/13] clk: bcm2835: Mark PLLD_PER as CRITICAL Stefan Wahren
2019-08-16 17:39 ` Stephen Boyd
2019-08-13 16:20 ` [PATCH V2 07/13] dt-bindings: i2c: bcm2835: Add brcm,bcm2711 compatible Stefan Wahren
2019-08-27 16:00 ` Rob Herring
2019-08-13 16:20 ` [PATCH V2 08/13] i2c: bcm2835: Avoid clk stretch quirk for BCM2711 Stefan Wahren
2019-08-14 19:36 ` Wolfram Sang
2019-08-17 7:32 ` Stefan Wahren
2019-08-17 8:30 ` Wolfram Sang
2019-08-13 16:20 ` Stefan Wahren [this message]
2019-08-13 17:22 ` [PATCH V2 09/13] dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema Rob Herring
2019-08-14 19:21 ` Stefan Wahren
2019-08-14 23:06 ` Rob Herring
2019-08-13 16:20 ` [PATCH V2 10/13] dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 11/13] ARM: bcm: Add support for BCM2711 SoC Stefan Wahren
2019-09-10 14:13 ` Matthias Brugger
2019-08-13 16:20 ` [PATCH V2 12/13] ARM: dts: Add minimal Raspberry Pi 4 support Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 13/13] MAINTAINERS: Add BCM2711 to BCM2835 ARCH Stefan Wahren
2019-08-13 20:42 ` [PATCH V2 00/13] ARM: Add minimal Raspberry Pi 4 support Eric Anholt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1565713248-4906-10-git-send-email-wahrenst@gmx.net \
--to=wahrenst@gmx.net \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=eric@anholt.net \
--cc=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sbranden@broadcom.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).