Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: Zhou Yanjie <zhouyanjie@zoho.com>
Cc: linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	mturquette@baylibre.com, paul.burton@mips.com, sboyd@kernel.org,
	robh+dt@kernel.org, syq@debian.org, mark.rutland@arm.com
Subject: Re: [PATCH 2/2 v3] clk: Ingenic: Add CGU driver for X1000.
Date: Mon, 11 Nov 2019 02:16:23 +0100
Message-ID: <1573434983.3.2@crapouillou.net> (raw)
In-Reply-To: <1573378102-72380-3-git-send-email-zhouyanjie@zoho.com>

Hi,


Le dim., nov. 10, 2019 at 17:28, Zhou Yanjie <zhouyanjie@zoho.com> a 
écrit :
> Add support for the clocks provided by the CGU in the Ingenic X1000
> SoC, making use of the cgu code to do the heavy lifting.
> 
> Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>

Reviewed-by: Paul Cercueil <paul@crapouillou.net>

> ---
>  drivers/clk/ingenic/Kconfig     |  10 ++
>  drivers/clk/ingenic/Makefile    |   1 +
>  drivers/clk/ingenic/x1000-cgu.c | 274 
> ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 285 insertions(+)
>  create mode 100644 drivers/clk/ingenic/x1000-cgu.c
> 
> diff --git a/drivers/clk/ingenic/Kconfig b/drivers/clk/ingenic/Kconfig
> index 1cb4899..fb7b399 100644
> --- a/drivers/clk/ingenic/Kconfig
> +++ b/drivers/clk/ingenic/Kconfig
> @@ -45,6 +45,16 @@ config INGENIC_CGU_JZ4780
> 
>  	  If building for a JZ4780 SoC, you want to say Y here.
> 
> +config INGENIC_CGU_X1000
> +	bool "Ingenic X1000 CGU driver"
> +	default MACH_X1000
> +	select INGENIC_CGU_COMMON
> +	help
> +	  Support the clocks provided by the CGU hardware on Ingenic X1000
> +	  and compatible SoCs.
> +
> +	  If building for a X1000 SoC, you want to say Y here.
> +
>  config INGENIC_TCU_CLK
>  	bool "Ingenic JZ47xx TCU clocks driver"
>  	default MACH_INGENIC
> diff --git a/drivers/clk/ingenic/Makefile 
> b/drivers/clk/ingenic/Makefile
> index 097220b..8b1dad9 100644
> --- a/drivers/clk/ingenic/Makefile
> +++ b/drivers/clk/ingenic/Makefile
> @@ -4,4 +4,5 @@ obj-$(CONFIG_INGENIC_CGU_JZ4740)	+= jz4740-cgu.o
>  obj-$(CONFIG_INGENIC_CGU_JZ4725B)	+= jz4725b-cgu.o
>  obj-$(CONFIG_INGENIC_CGU_JZ4770)	+= jz4770-cgu.o
>  obj-$(CONFIG_INGENIC_CGU_JZ4780)	+= jz4780-cgu.o
> +obj-$(CONFIG_INGENIC_CGU_X1000)		+= x1000-cgu.o
>  obj-$(CONFIG_INGENIC_TCU_CLK)		+= tcu.o
> diff --git a/drivers/clk/ingenic/x1000-cgu.c 
> b/drivers/clk/ingenic/x1000-cgu.c
> new file mode 100644
> index 00000000..b22d87b
> --- /dev/null
> +++ b/drivers/clk/ingenic/x1000-cgu.c
> @@ -0,0 +1,274 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * X1000 SoC CGU driver
> + * Copyright (c) 2019 Zhou Yanjie <zhouyanjie@zoho.com>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/of.h>
> +#include <dt-bindings/clock/x1000-cgu.h>
> +#include "cgu.h"
> +#include "pm.h"
> +
> +/* CGU register offsets */
> +#define CGU_REG_CPCCR		0x00
> +#define CGU_REG_APLL		0x10
> +#define CGU_REG_MPLL		0x14
> +#define CGU_REG_CLKGR		0x20
> +#define CGU_REG_OPCR		0x24
> +#define CGU_REG_DDRCDR		0x2c
> +#define CGU_REG_MACCDR		0x54
> +#define CGU_REG_I2SCDR		0x60
> +#define CGU_REG_LPCDR		0x64
> +#define CGU_REG_MSC0CDR		0x68
> +#define CGU_REG_I2SCDR1		0x70
> +#define CGU_REG_SSICDR		0x74
> +#define CGU_REG_CIMCDR		0x7c
> +#define CGU_REG_PCMCDR		0x84
> +#define CGU_REG_MSC1CDR		0xa4
> +#define CGU_REG_CMP_INTR	0xb0
> +#define CGU_REG_CMP_INTRE	0xb4
> +#define CGU_REG_DRCG		0xd0
> +#define CGU_REG_CPCSR		0xd4
> +#define CGU_REG_PCMCDR1		0xe0
> +#define CGU_REG_MACPHYC		0xe8
> +
> +/* bits within the OPCR register */
> +#define OPCR_SPENDN0		BIT(7)
> +#define OPCR_SPENDN1		BIT(6)
> +
> +static struct ingenic_cgu *cgu;
> +
> +static const s8 pll_od_encoding[8] = {
> +	0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
> +};
> +
> +static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
> +
> +	/* External clocks */
> +
> +	[X1000_CLK_EXCLK] = { "ext", CGU_CLK_EXT },
> +	[X1000_CLK_RTCLK] = { "rtc", CGU_CLK_EXT },
> +
> +	/* PLLs */
> +
> +	[X1000_CLK_APLL] = {
> +		"apll", CGU_CLK_PLL,
> +		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
> +		.pll = {
> +			.reg = CGU_REG_APLL,
> +			.m_shift = 24,
> +			.m_bits = 7,
> +			.m_offset = 1,
> +			.n_shift = 18,
> +			.n_bits = 5,
> +			.n_offset = 1,
> +			.od_shift = 16,
> +			.od_bits = 2,
> +			.od_max = 8,
> +			.od_encoding = pll_od_encoding,
> +			.bypass_bit = 9,
> +			.enable_bit = 8,
> +			.stable_bit = 10,
> +		},
> +	},
> +
> +	[X1000_CLK_MPLL] = {
> +		"mpll", CGU_CLK_PLL,
> +		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
> +		.pll = {
> +			.reg = CGU_REG_MPLL,
> +			.m_shift = 24,
> +			.m_bits = 7,
> +			.m_offset = 1,
> +			.n_shift = 18,
> +			.n_bits = 5,
> +			.n_offset = 1,
> +			.od_shift = 16,
> +			.od_bits = 2,
> +			.od_max = 8,
> +			.od_encoding = pll_od_encoding,
> +			.bypass_bit = 6,
> +			.enable_bit = 7,
> +			.stable_bit = 0,
> +		},
> +	},
> +
> +	/* Muxes & dividers */
> +
> +	[X1000_CLK_SCLKA] = {
> +		"sclk_a", CGU_CLK_MUX,
> +		.parents = { -1, X1000_CLK_EXCLK, X1000_CLK_APLL, -1 },
> +		.mux = { CGU_REG_CPCCR, 30, 2 },
> +	},
> +
> +	[X1000_CLK_CPUMUX] = {
> +		"cpu_mux", CGU_CLK_MUX,
> +		.parents = { -1, X1000_CLK_SCLKA, X1000_CLK_MPLL, -1 },
> +		.mux = { CGU_REG_CPCCR, 28, 2 },
> +	},
> +
> +	[X1000_CLK_CPU] = {
> +		"cpu", CGU_CLK_DIV,
> +		.parents = { X1000_CLK_CPUMUX, -1, -1, -1 },
> +		.div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
> +	},
> +
> +	[X1000_CLK_L2CACHE] = {
> +		"l2cache", CGU_CLK_DIV,
> +		.parents = { X1000_CLK_CPUMUX, -1, -1, -1 },
> +		.div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
> +	},
> +
> +	[X1000_CLK_AHB0] = {
> +		"ahb0", CGU_CLK_MUX | CGU_CLK_DIV,
> +		.parents = { -1, X1000_CLK_SCLKA, X1000_CLK_MPLL, -1 },
> +		.mux = { CGU_REG_CPCCR, 26, 2 },
> +		.div = { CGU_REG_CPCCR, 8, 1, 4, 21, -1, -1 },
> +	},
> +
> +	[X1000_CLK_AHB2PMUX] = {
> +		"ahb2_apb_mux", CGU_CLK_MUX,
> +		.parents = { -1, X1000_CLK_SCLKA, X1000_CLK_MPLL, -1 },
> +		.mux = { CGU_REG_CPCCR, 24, 2 },
> +	},
> +
> +	[X1000_CLK_AHB2] = {
> +		"ahb2", CGU_CLK_DIV,
> +		.parents = { X1000_CLK_AHB2PMUX, -1, -1, -1 },
> +		.div = { CGU_REG_CPCCR, 12, 1, 4, 20, -1, -1 },
> +	},
> +
> +	[X1000_CLK_PCLK] = {
> +		"pclk", CGU_CLK_DIV,
> +		.parents = { X1000_CLK_AHB2PMUX, -1, -1, -1 },
> +		.div = { CGU_REG_CPCCR, 16, 1, 4, 20, -1, -1 },
> +	},
> +
> +	[X1000_CLK_DDR] = {
> +		"ddr", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
> +		.parents = { -1, X1000_CLK_SCLKA, X1000_CLK_MPLL, -1 },
> +		.mux = { CGU_REG_DDRCDR, 30, 2 },
> +		.div = { CGU_REG_DDRCDR, 0, 1, 4, 29, 28, 27 },
> +		.gate = { CGU_REG_CLKGR, 31 },
> +	},
> +
> +	[X1000_CLK_MAC] = {
> +		"mac", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
> +		.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL},
> +		.mux = { CGU_REG_MACCDR, 31, 1 },
> +		.div = { CGU_REG_MACCDR, 0, 1, 8, 29, 28, 27 },
> +		.gate = { CGU_REG_CLKGR, 25 },
> +	},
> +
> +	[X1000_CLK_MSCMUX] = {
> +		"msc_mux", CGU_CLK_MUX,
> +		.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL},
> +		.mux = { CGU_REG_MSC0CDR, 31, 1 },
> +	},
> +
> +	[X1000_CLK_MSC0] = {
> +		"msc0", CGU_CLK_DIV | CGU_CLK_GATE,
> +		.parents = { X1000_CLK_MSCMUX, -1, -1, -1 },
> +		.div = { CGU_REG_MSC0CDR, 0, 2, 8, 29, 28, 27 },
> +		.gate = { CGU_REG_CLKGR, 4 },
> +	},
> +
> +	[X1000_CLK_MSC1] = {
> +		"msc1", CGU_CLK_DIV | CGU_CLK_GATE,
> +		.parents = { X1000_CLK_MSCMUX, -1, -1, -1 },
> +		.div = { CGU_REG_MSC1CDR, 0, 2, 8, 29, 28, 27 },
> +		.gate = { CGU_REG_CLKGR, 5 },
> +	},
> +
> +	[X1000_CLK_SSIPLL] = {
> +		"ssi_pll", CGU_CLK_MUX | CGU_CLK_DIV,
> +		.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL, -1, -1 },
> +		.mux = { CGU_REG_SSICDR, 31, 1 },
> +		.div = { CGU_REG_SSICDR, 0, 1, 8, 29, 28, 27 },
> +	},
> +
> +	[X1000_CLK_SSIMUX] = {
> +		"ssi_mux", CGU_CLK_MUX,
> +		.parents = { X1000_CLK_EXCLK, X1000_CLK_SSIPLL, -1, -1 },
> +		.mux = { CGU_REG_SSICDR, 30, 1 },
> +	},
> +
> +	/* Gate-only clocks */
> +
> +	[X1000_CLK_SFC] = {
> +		"sfc", CGU_CLK_GATE,
> +		.parents = { X1000_CLK_SSIPLL, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR, 2 },
> +	},
> +
> +	[X1000_CLK_I2C0] = {
> +		"i2c0", CGU_CLK_GATE,
> +		.parents = { X1000_CLK_PCLK, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR, 7 },
> +	},
> +
> +	[X1000_CLK_I2C1] = {
> +		"i2c1", CGU_CLK_GATE,
> +		.parents = { X1000_CLK_PCLK, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR, 8 },
> +	},
> +
> +	[X1000_CLK_I2C2] = {
> +		"i2c2", CGU_CLK_GATE,
> +		.parents = { X1000_CLK_PCLK, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR, 9 },
> +	},
> +
> +	[X1000_CLK_UART0] = {
> +		"uart0", CGU_CLK_GATE,
> +		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR, 14 },
> +	},
> +
> +	[X1000_CLK_UART1] = {
> +		"uart1", CGU_CLK_GATE,
> +		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR, 15 },
> +	},
> +
> +	[X1000_CLK_UART2] = {
> +		"uart2", CGU_CLK_GATE,
> +		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR, 16 },
> +	},
> +
> +	[X1000_CLK_SSI] = {
> +		"ssi", CGU_CLK_GATE,
> +		.parents = { X1000_CLK_SSIMUX, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR, 19 },
> +	},
> +
> +	[X1000_CLK_PDMA] = {
> +		"pdma", CGU_CLK_GATE,
> +		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR, 21 },
> +	},
> +};
> +
> +static void __init x1000_cgu_init(struct device_node *np)
> +{
> +	int retval;
> +
> +	cgu = ingenic_cgu_new(x1000_cgu_clocks,
> +			      ARRAY_SIZE(x1000_cgu_clocks), np);
> +	if (!cgu) {
> +		pr_err("%s: failed to initialise CGU\n", __func__);
> +		return;
> +	}
> +
> +	retval = ingenic_cgu_register_clocks(cgu);
> +	if (retval) {
> +		pr_err("%s: failed to register CGU Clocks\n", __func__);
> +		return;
> +	}
> +
> +	ingenic_cgu_register_syscore_ops(cgu);
> +}
> +CLK_OF_DECLARE(x1000_cgu, "ingenic,x1000-cgu", x1000_cgu_init);
> --
> 2.7.4
> 
> 



  reply index

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-18 17:50 clk: X1000: Add support for the X1000 Zhou Yanjie
2019-10-18 17:50 ` [PATCH 1/2] dt-bindings: clock: Add X1000 bindings Zhou Yanjie
2019-10-18 17:50 ` [PATCH 2/2] clk: Ingenic: Add CGU driver for X1000 Zhou Yanjie
2019-10-21 12:31   ` Paul Cercueil
2019-10-22 15:34     ` Zhou Yanjie
2019-10-22 16:56 ` clk: X1000: Add support for the X1000 v2 Zhou Yanjie
2019-10-22 16:56   ` [PATCH 1/2 v2] dt-bindings: clock: Add X1000 bindings Zhou Yanjie
2019-10-25 21:49     ` Rob Herring
2019-10-22 16:56   ` [PATCH 2/2 v2] clk: Ingenic: Add CGU driver for X1000 Zhou Yanjie
2019-11-02 21:27     ` Paul Cercueil
2019-11-10  9:28 ` clk: X1000: Add support for the X1000 v3 Zhou Yanjie
2019-11-10  9:28   ` [PATCH 1/2 v3] dt-bindings: clock: Add X1000 bindings Zhou Yanjie
2019-11-11  1:13     ` Paul Cercueil
2019-11-14 13:25       ` Zhou Yanjie
2019-11-12  0:55     ` Rob Herring
2019-11-13 23:59       ` Stephen Boyd
2019-11-14 13:37         ` Zhou Yanjie
2019-11-14 13:29       ` Zhou Yanjie
2019-11-14  0:00     ` Stephen Boyd
2019-11-10  9:28   ` [PATCH 2/2 v3] clk: Ingenic: Add CGU driver for X1000 Zhou Yanjie
2019-11-11  1:16     ` Paul Cercueil [this message]
2019-11-14  0:00     ` Stephen Boyd

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1573434983.3.2@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=paul.burton@mips.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=syq@debian.org \
    --cc=zhouyanjie@zoho.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git