[PATCH 6/8] clk: at91: move sam9x60's PLL register offsets to PMC header

[Claudiu Beznea <claudiu.beznea@microchip.com>]

Move SAM9X60's PLL register offsets to PMC header so that the
definitions would also be available from arch/arm/mach-at91/pm_suspend.S.
This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/clk/at91/clk-sam9x60-pll.c | 91 ++++++++++++++++----------------------
 include/linux/clk/at91_pmc.h       | 20 +++++++++
 2 files changed, 57 insertions(+), 54 deletions(-)

diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
index dfb354a5ff18..e699803986e5 100644
--- a/drivers/clk/at91/clk-sam9x60-pll.c
+++ b/drivers/clk/at91/clk-sam9x60-pll.c
@@ -14,27 +14,8 @@
 
 #include "pmc.h"
 
-#define PMC_PLL_CTRL0	0xc
-#define		PMC_PLL_CTRL0_DIV_MSK		GENMASK(7, 0)
-#define		PMC_PLL_CTRL0_ENPLL		BIT(28)
-#define		PMC_PLL_CTRL0_ENPLLCK		BIT(29)
-#define		PMC_PLL_CTRL0_ENLOCK		BIT(31)
-
-#define PMC_PLL_CTRL1	0x10
-#define		PMC_PLL_CTRL1_FRACR_MSK		GENMASK(21, 0)
-#define		PMC_PLL_CTRL1_MUL_MSK		GENMASK(30, 24)
-
-#define PMC_PLL_ACR	0x18
-#define		PMC_PLL_ACR_DEFAULT_UPLL	0x12020010UL
-#define		PMC_PLL_ACR_DEFAULT_PLLA	0x00020010UL
-#define		PMC_PLL_ACR_UTMIVR		BIT(12)
-#define		PMC_PLL_ACR_UTMIBG		BIT(13)
-#define		PMC_PLL_ACR_LOOP_FILTER_MSK	GENMASK(31, 24)
-
-#define PMC_PLL_UPDT	0x1c
-#define		PMC_PLL_UPDT_UPDATE		BIT(8)
-
-#define PMC_PLL_ISR0	0xec
+#define	PMC_PLL_CTRL0_DIV_MSK	GENMASK(7, 0)
+#define	PMC_PLL_CTRL1_MUL_MSK	GENMASK(30, 24)
 
 #define PLL_DIV_MAX		(FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, UINT_MAX) + 1)
 #define UPLL_DIV		2
@@ -59,7 +40,7 @@ static inline bool sam9x60_pll_ready(struct regmap *regmap, int id)
 {
 	unsigned int status;
 
-	regmap_read(regmap, PMC_PLL_ISR0, &status);
+	regmap_read(regmap, AT91_PMC_PLL_ISR0, &status);
 
 	return !!(status & BIT(id));
 }
@@ -74,12 +55,12 @@ static int sam9x60_pll_prepare(struct clk_hw *hw)
 	u32 val;
 
 	spin_lock_irqsave(pll->lock, flags);
-	regmap_write(regmap, PMC_PLL_UPDT, pll->id);
+	regmap_write(regmap, AT91_PMC_PLL_UPDT, pll->id);
 
-	regmap_read(regmap, PMC_PLL_CTRL0, &val);
+	regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val);
 	div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, val);
 
-	regmap_read(regmap, PMC_PLL_CTRL1, &val);
+	regmap_read(regmap, AT91_PMC_PLL_CTRL1, &val);
 	mul = FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, val);
 
 	if (sam9x60_pll_ready(regmap, pll->id) &&
@@ -88,39 +69,39 @@ static int sam9x60_pll_prepare(struct clk_hw *hw)
 		return 0;
 	}
 
-	/* Recommended value for PMC_PLL_ACR */
+	/* Recommended value for AT91_PMC_PLL_ACR */
 	if (pll->characteristics->upll)
-		val = PMC_PLL_ACR_DEFAULT_UPLL;
+		val = AT91_PMC_PLL_ACR_DEFAULT_UPLL;
 	else
-		val = PMC_PLL_ACR_DEFAULT_PLLA;
-	regmap_write(regmap, PMC_PLL_ACR, val);
+		val = AT91_PMC_PLL_ACR_DEFAULT_PLLA;
+	regmap_write(regmap, AT91_PMC_PLL_ACR, val);
 
-	regmap_write(regmap, PMC_PLL_CTRL1,
+	regmap_write(regmap, AT91_PMC_PLL_CTRL1,
 		     FIELD_PREP(PMC_PLL_CTRL1_MUL_MSK, pll->mul));
 
 	if (pll->characteristics->upll) {
 		/* Enable the UTMI internal bandgap */
-		val |= PMC_PLL_ACR_UTMIBG;
-		regmap_write(regmap, PMC_PLL_ACR, val);
+		val |= AT91_PMC_PLL_ACR_UTMIBG;
+		regmap_write(regmap, AT91_PMC_PLL_ACR, val);
 
 		udelay(10);
 
 		/* Enable the UTMI internal regulator */
-		val |= PMC_PLL_ACR_UTMIVR;
-		regmap_write(regmap, PMC_PLL_ACR, val);
+		val |= AT91_PMC_PLL_ACR_UTMIVR;
+		regmap_write(regmap, AT91_PMC_PLL_ACR, val);
 
 		udelay(10);
 	}
 
-	regmap_update_bits(regmap, PMC_PLL_UPDT,
-			   PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
+	regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
+			   AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
 
-	regmap_write(regmap, PMC_PLL_CTRL0,
-		     PMC_PLL_CTRL0_ENLOCK | PMC_PLL_CTRL0_ENPLL |
-		     PMC_PLL_CTRL0_ENPLLCK | pll->div);
+	regmap_write(regmap, AT91_PMC_PLL_CTRL0,
+		     AT91_PMC_PLL_CTRL0_ENLOCK | AT91_PMC_PLL_CTRL0_ENPLL |
+		     AT91_PMC_PLL_CTRL0_ENPLLCK | pll->div);
 
-	regmap_update_bits(regmap, PMC_PLL_UPDT,
-			   PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
+	regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
+			   AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
 
 	while (!sam9x60_pll_ready(regmap, pll->id))
 		cpu_relax();
@@ -144,22 +125,24 @@ static void sam9x60_pll_unprepare(struct clk_hw *hw)
 
 	spin_lock_irqsave(pll->lock, flags);
 
-	regmap_write(pll->regmap, PMC_PLL_UPDT, pll->id);
+	regmap_write(pll->regmap, AT91_PMC_PLL_UPDT, pll->id);
 
-	regmap_update_bits(pll->regmap, PMC_PLL_CTRL0,
-			   PMC_PLL_CTRL0_ENPLLCK, 0);
+	regmap_update_bits(pll->regmap, AT91_PMC_PLL_CTRL0,
+			   AT91_PMC_PLL_CTRL0_ENPLLCK, 0);
 
-	regmap_update_bits(pll->regmap, PMC_PLL_UPDT,
-			   PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
+	regmap_update_bits(pll->regmap, AT91_PMC_PLL_UPDT,
+			   AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
 
-	regmap_update_bits(pll->regmap, PMC_PLL_CTRL0, PMC_PLL_CTRL0_ENPLL, 0);
+	regmap_update_bits(pll->regmap, AT91_PMC_PLL_CTRL0,
+			   AT91_PMC_PLL_CTRL0_ENPLL, 0);
 
 	if (pll->characteristics->upll)
-		regmap_update_bits(pll->regmap, PMC_PLL_ACR,
-				   PMC_PLL_ACR_UTMIBG | PMC_PLL_ACR_UTMIVR, 0);
+		regmap_update_bits(pll->regmap, AT91_PMC_PLL_ACR,
+				   AT91_PMC_PLL_ACR_UTMIBG |
+				   AT91_PMC_PLL_ACR_UTMIVR, 0);
 
-	regmap_update_bits(pll->regmap, PMC_PLL_UPDT,
-			   PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
+	regmap_update_bits(pll->regmap, AT91_PMC_PLL_UPDT,
+			   AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
 
 	spin_unlock_irqrestore(pll->lock, flags);
 }
@@ -316,10 +299,10 @@ sam9x60_clk_register_pll(struct regmap *regmap, spinlock_t *lock,
 	pll->regmap = regmap;
 	pll->lock = lock;
 
-	regmap_write(regmap, PMC_PLL_UPDT, id);
-	regmap_read(regmap, PMC_PLL_CTRL0, &pllr);
+	regmap_write(regmap, AT91_PMC_PLL_UPDT, id);
+	regmap_read(regmap, AT91_PMC_PLL_CTRL0, &pllr);
 	pll->div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, pllr);
-	regmap_read(regmap, PMC_PLL_CTRL1, &pllr);
+	regmap_read(regmap, AT91_PMC_PLL_CTRL1, &pllr);
 	pll->mul = FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, pllr);
 
 	hw = &pll->hw;
diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
index f3d691fc5f29..49a53a137610 100644
--- a/include/linux/clk/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h
@@ -33,16 +33,34 @@
 #define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
 #define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
 
+#define AT91_PMC_PLL_CTRL0		0x0C		/* PLL Control Register 0 [for SAM9X60] */
+#define		AT91_PMC_PLL_CTRL0_ENPLL	(1 << 28)	/* Enable PLL */
+#define		AT91_PMC_PLL_CTRL0_ENPLLCK	(1 << 29)	/* Enable PLL clock for PMC */
+#define		AT91_PMC_PLL_CTRL0_ENLOCK	(1 << 31)	/* Enable PLL lock */
+
+#define AT91_PMC_PLL_CTRL1		0x10		/* PLL Control Register 1 [for SAM9X60] */
+
 #define	AT91_PMC_PCER		0x10			/* Peripheral Clock Enable Register */
 #define	AT91_PMC_PCDR		0x14			/* Peripheral Clock Disable Register */
 #define	AT91_PMC_PCSR		0x18			/* Peripheral Clock Status Register */
 
+#define AT91_PMC_PLL_ACR	0x18			/* PLL Analog Control Register [for SAM9X60] */
+#define		AT91_PMC_PLL_ACR_DEFAULT_UPLL	0x12020010UL	/* Default PLL ACR value for UPLL */
+#define		AT91_PMC_PLL_ACR_DEFAULT_PLLA	0x00020010UL	/* Default PLL ACR value for PLLA */
+#define		AT91_PMC_PLL_ACR_UTMIVR		(1 << 12)	/* UPLL Voltage regulator Control */
+#define		AT91_PMC_PLL_ACR_UTMIBG		(1 << 13)	/* UPLL Bandgap Control */
+
 #define	AT91_CKGR_UCKR		0x1C			/* UTMI Clock Register [some SAM9] */
 #define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
 #define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
 #define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
 #define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI BIAS Start-up Time */
 
+#define AT91_PMC_PLL_UPDT		0x1C		/* PMC PLL update register [for SAM9X60] */
+#define		AT91_PMC_PLL_UPDT_UPDATE	(1 << 8)	/* Update PLL settings */
+#define		AT91_PMC_PLL_UPDT_ID		(1 << 0)	/* PLL ID */
+#define		AT91_PMC_PLL_UPDT_STUPTIM	(0xff << 16)	/* Startup time */
+
 #define	AT91_CKGR_MOR		0x20			/* Main Oscillator Register [not on SAM9RL] */
 #define		AT91_PMC_MOSCEN		(1    <<  0)		/* Main Oscillator Enable */
 #define		AT91_PMC_OSCBYPASS	(1    <<  1)		/* Oscillator Bypass */
@@ -183,6 +201,8 @@
 #define		AT91_PMC_WPVS		(0x1  <<  0)		/* Write Protect Violation Status */
 #define		AT91_PMC_WPVSRC		(0xffff  <<  8)		/* Write Protect Violation Source */
 
+#define AT91_PMC_PLL_ISR0	0xEC			/* PLL Interrupt Status Register 0 [SAM9X60 only] */
+
 #define AT91_PMC_PCER1		0x100			/* Peripheral Clock Enable Register 1 [SAMA5 only]*/
 #define AT91_PMC_PCDR1		0x104			/* Peripheral Clock Enable Register 1 */
 #define AT91_PMC_PCSR1		0x108			/* Peripheral Clock Enable Register 1 */
-- 
2.7.4