linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: dillon.minfei@gmail.com
To: linus.walleij@linaro.org, broonie@kernel.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	dri-devel@lists.freedesktop.org, linux-clk@vger.kernel.org,
	dillon min <dillon.minfei@gmail.com>
Subject: [PATCH v5 5/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate, fix duplicated ltdc clock register to 'clk_core' case ltdc's clock turn off by clk_disable_unused()
Date: Mon, 25 May 2020 11:45:45 +0800	[thread overview]
Message-ID: <1590378348-8115-6-git-send-email-dillon.minfei@gmail.com> (raw)
In-Reply-To: <1590378348-8115-1-git-send-email-dillon.minfei@gmail.com>

From: dillon min <dillon.minfei@gmail.com>

ltdc set clock rate crashed
   'post_div_data[]''s pll_num is PLL_I2S, PLL_SAI (number is 1,2). but,
    as pll_num is offset of 'clks[]' input to clk_register_pll_div(), which
    is FCLK, CLK_LSI, defined in 'include/dt-bindings/clock/stm32fx-clock.h'
    so, this is a null object at the register time.
    then, in ltdc's clock is_enabled(), enable(), will call to_clk_gate().
    will return a null object, cause kernel crashed.
    need change pll_num to PLL_VCO_I2S, PLL_VCO_SAI for 'post_div_data[]'

 duplicated ltdc clock
   'stm32f429_gates[]' has a member 'ltdc' register to 'clk_core', but no
    upper driver use it, ltdc driver use the lcd-tft defined in
   'stm32f429_aux_clk[]'. after system startup, as stm32f429_gates[]'s ltdc
    enable_count is zero, so turn off by clk_disable_unused()

Changes since V3:
1 drop last wrong changes about 'CLK_IGNORE_UNUSED' patch
2 fix PLL_SAI mismatch with PLL_VCO_SAI

Signed-off-by: dillon min <dillon.minfei@gmail.com>
---
 drivers/clk/clk-stm32f4.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 18117ce..fa62e99 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -129,7 +129,6 @@ static const struct stm32f4_gate_data stm32f429_gates[] __initconst = {
 	{ STM32F4_RCC_APB2ENR, 20,	"spi5",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR, 21,	"spi6",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR, 22,	"sai1",		"apb2_div" },
-	{ STM32F4_RCC_APB2ENR, 26,	"ltdc",		"apb2_div" },
 };
 
 static const struct stm32f4_gate_data stm32f469_gates[] __initconst = {
@@ -557,13 +556,13 @@ static const struct clk_div_table post_divr_table[] = {
 
 #define MAX_POST_DIV 3
 static const struct stm32f4_pll_post_div_data  post_div_data[MAX_POST_DIV] = {
-	{ CLK_I2SQ_PDIV, PLL_I2S, "plli2s-q-div", "plli2s-q",
+	{ CLK_I2SQ_PDIV, PLL_VCO_I2S, "plli2s-q-div", "plli2s-q",
 		CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 0, 5, 0, NULL},
 
-	{ CLK_SAIQ_PDIV, PLL_SAI, "pllsai-q-div", "pllsai-q",
+	{ CLK_SAIQ_PDIV, PLL_VCO_SAI, "pllsai-q-div", "pllsai-q",
 		CLK_SET_RATE_PARENT, STM32F4_RCC_DCKCFGR, 8, 5, 0, NULL },
 
-	{ NO_IDX, PLL_SAI, "pllsai-r-div", "pllsai-r", CLK_SET_RATE_PARENT,
+	{ NO_IDX, PLL_VCO_SAI, "pllsai-r-div", "pllsai-r", CLK_SET_RATE_PARENT,
 		STM32F4_RCC_DCKCFGR, 16, 2, 0, post_divr_table },
 };
 
-- 
2.7.4


  parent reply	other threads:[~2020-05-25  3:46 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-25  3:45 [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco dillon.minfei
2020-05-25  3:45 ` [PATCH v5 1/8] ARM: dts: stm32: Add dma config for spi5 dillon.minfei
2020-05-25  3:45 ` [PATCH v5 2/8] ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board dillon.minfei
2020-05-25  3:45 ` [PATCH v5 3/8] ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board dillon.minfei
2020-05-25  3:45 ` [PATCH v5 4/8] dt-bindings: display: panel: Add ilitek ili9341 panel bindings dillon.minfei
2020-05-25 12:20   ` Linus Walleij
2020-05-25  3:45 ` dillon.minfei [this message]
2020-05-27  1:44   ` [PATCH v5 5/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate, fix duplicated ltdc clock register to 'clk_core' case ltdc's clock turn off by clk_disable_unused() Stephen Boyd
2020-05-27  3:30     ` dillon min
2020-05-25  3:45 ` [PATCH v5 6/8] drm/panel: Add ilitek ili9341 panel driver dillon.minfei
2020-05-25 12:23   ` Linus Walleij
2020-05-26  7:46   ` Andy Shevchenko
2020-05-26  9:08     ` dillon min
2020-05-26 10:38       ` Noralf Trønnes
2020-06-30 15:32         ` dillon min
2020-05-25  3:45 ` [PATCH v5 7/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4 dillon.minfei
2020-05-25  3:45 ` [PATCH v5 8/8] spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be coexit with 'SPI_3WIRE' mode dillon.minfei
2020-05-26  9:19 ` [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco Mark Brown
     [not found] <broonie@kernel.org>
2020-05-25  3:40 ` dillon.minfei
2020-05-25  3:40   ` [PATCH v5 5/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate, fix duplicated ltdc clock register to 'clk_core' case ltdc's clock turn off by clk_disable_unused() dillon.minfei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1590378348-8115-6-git-send-email-dillon.minfei@gmail.com \
    --to=dillon.minfei@gmail.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).