Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Hanks Chen <hanks.chen@mediatek.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Sean Wang <sean.wang@kernel.org>
Cc: mtk01761 <wendell.lin@mediatek.com>,
	Andy Teng <andy.teng@mediatek.com>, <linux-gpio@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>,
	<wsd_upstream@mediatek.com>, CC Hwang <cc.hwang@mediatek.com>,
	Loda Chou <loda.chou@mediatek.com>,
	Hanks Chen <hanks.chen@mediatek.com>
Subject: [PATCH v6 7/7] arm64: dts: add dts nodes for MT6779
Date: Thu, 18 Jun 2020 19:33:38 +0800
Message-ID: <1592480018-3340-8-git-send-email-hanks.chen@mediatek.com> (raw)
In-Reply-To: <1592480018-3340-1-git-send-email-hanks.chen@mediatek.com>

this adds initial MT6779 dts settings for board support,
including cpu, gic, timer, ccf, pinctrl, uart, sysirq...etc.

Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/Makefile       |    1 +
 arch/arm64/boot/dts/mediatek/mt6779-evb.dts |   31 ++++
 arch/arm64/boot/dts/mediatek/mt6779.dtsi    |  261 +++++++++++++++++++++++++++
 3 files changed, 293 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index a57af9d..4d1b0f9 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
new file mode 100644
index 0000000..164f5cb
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt6779.dtsi"
+
+/ {
+	model = "MediaTek MT6779 EVB";
+	compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
new file mode 100644
index 0000000..64e5963
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/clock/mt6779-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/mt6779-pinfunc.h>
+
+/ {
+	compatible = "mediatek,mt6779";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x100>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x200>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x300>;
+		};
+
+		cpu4: cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x400>;
+		};
+
+		cpu5: cpu@5 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x500>;
+		};
+
+		cpu6: cpu@6 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a75";
+			enable-method = "psci";
+			reg = <0x600>;
+		};
+
+		cpu7: cpu@7 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a75";
+			enable-method = "psci";
+			reg = <0x700>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+
+	clk26m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator@1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@0c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c040000 0 0x200000>; /* GICR */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 \
+						&cpu2 &cpu3 &cpu4 &cpu5>;
+				};
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+
+		};
+
+		sysirq: intpol-controller@0c53a650 {
+			compatible = "mediatek,mt6779-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x0c53a650 0 0x50>;
+		};
+
+		topckgen: clock-controller@10000000 {
+			compatible = "mediatek,mt6779-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: clock-controller@10001000 {
+			compatible = "mediatek,mt6779-infracfg_ao", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt6779-pinctrl", "syscon";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11c20000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e70000 0 0x1000>,
+			      <0 0x11ea0000 0 0x1000>,
+			      <0 0x11f20000 0 0x1000>,
+			      <0 0x11f30000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio", "iocfg_rm",
+				    "iocfg_br", "iocfg_lm",
+				    "iocfg_lb", "iocfg_rt",
+				    "iocfg_lt", "iocfg_tl",
+				    "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 210>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apmixed: clock-controller@1000c000 {
+			compatible = "mediatek,mt6779-apmixed", "syscon";
+			reg = <0 0x1000c000 0 0xe00>;
+			#clock-cells = <1>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt6779-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt6779-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		audio: clock-controller@11210000 {
+			compatible = "mediatek,mt6779-audio", "syscon";
+			reg = <0 0x11210000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt6779-mfgcfg", "syscon";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt6779-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys: clock-controller@15020000 {
+			compatible = "mediatek,mt6779-imgsys", "syscon";
+			reg = <0 0x15020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys: clock-controller@16000000 {
+			compatible = "mediatek,mt6779-vdecsys", "syscon";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@17000000 {
+			compatible = "mediatek,mt6779-vencsys", "syscon";
+			reg = <0 0x17000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt6779-camsys", "syscon";
+			reg = <0 0x1a000000 0 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		ipesys: clock-controller@1b000000 {
+			compatible = "mediatek,mt6779-ipesys", "syscon";
+			reg = <0 0x1b000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+	};
+};
-- 
1.7.9.5

  parent reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-18 11:33 [PATCH v6] Add basic SoC Support for Mediatek MT6779 SoC Hanks Chen
2020-06-18 11:33 ` [PATCH v6 1/7] dt-bindings: pinctrl: add bindings for MediaTek " Hanks Chen
2020-06-21 21:13   ` Pavel Machek
2020-06-22  2:28     ` Hanks Chen
2020-06-29 21:53   ` Rob Herring
2020-06-30  3:56     ` Hanks Chen
2020-06-18 11:33 ` [PATCH v6 2/7] pinctrl: mediatek: update pinmux definitions for mt6779 Hanks Chen
2020-07-07 11:39   ` Linus Walleij
2020-06-18 11:33 ` [PATCH v6 3/7] pinctrl: mediatek: avoid virtual gpio trying to set reg Hanks Chen
2020-07-07 11:31   ` Linus Walleij
2020-07-07 11:34     ` Linus Walleij
2020-07-14 20:39       ` Sean Wang
2020-06-18 11:33 ` [PATCH v6 5/7] pinctrl: mediatek: add mt6779 eint support Hanks Chen
2020-07-07 11:36   ` Linus Walleij
2020-06-18 11:33 ` [PATCH v6 6/7] clk: mediatek: add UART0 clock support Hanks Chen
2020-06-18 15:51   ` Matthias Brugger
2020-06-18 16:16     ` Hanks Chen
2020-06-19 10:02       ` Matthias Brugger
2020-06-18 11:33 ` Hanks Chen [this message]
2020-06-22 11:28   ` [PATCH v6 7/7] arm64: dts: add dts nodes for MT6779 Matthias Brugger
     [not found] ` <1592480018-3340-5-git-send-email-hanks.chen@mediatek.com>
2020-07-07 11:37   ` [PATCH v6 4/7] pinctrl: mediatek: add pinctrl support for MT6779 SoC Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1592480018-3340-8-git-send-email-hanks.chen@mediatek.com \
    --to=hanks.chen@mediatek.com \
    --cc=andy.teng@mediatek.com \
    --cc=cc.hwang@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=loda.chou@mediatek.com \
    --cc=matthias.bgg@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sean.wang@kernel.org \
    --cc=wendell.lin@mediatek.com \
    --cc=wsd_upstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git