On Mon, Sep 25, 2017 at 10:12:09AM +0000, Icenowy Zheng wrote: > 于 2017年9月25日 GMT+08:00 下午6:10:27, Maxime Ripard 写到: > >Hi, > > > >On Sat, Sep 23, 2017 at 12:15:28AM +0000, Icenowy Zheng wrote: > >> This patchset imports simple DVFS support for Allwinner A64 SoC. > >> > >> As the thermal sensor driver is not yet implemented and some boards > >> have still no AXP PMIC support, now only two OPPs are present -- > >> 648MHz@1.04V and 816MHz@1.1V to prevent overheat or undervoltage. > >> > >> PATCH 1 is a fix to the CCU driver of A64, and the remaining patches > >> set up the device tree bits of the DVFS on Pine64. > > > >How has this been tested? > > > >What tasks did you run, with what governor, etc... > > I only tested manual frequency switching between 648MHz and > 816MHz, and tested the PLL stuck issue by change the OPPs to > some random value. Ideally, we should test that it's actually reliable. Poorly chosen OPPs might lead to corrupt data that you might not get before a while. Please test using: https://linux-sunxi.org/Hardware_Reliability_Tests#Reliability_of_cpufreq_voltage.2Ffrequency_settings And post the report. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com