From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Lucas Stach To: Michael Turquette , Stephen Boyd , Rob Herring , Shawn Guo Cc: Fabio Estevam , kernel@pengutronix.de, linux-imx@nxp.com, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, patchwork-lst@pengutronix.de Subject: [PATCH 1/3] clk: imx6q: reset exclusive gates on init Date: Tue, 31 Jul 2018 12:20:07 +0200 Message-Id: <20180731102009.6710-1-l.stach@pengutronix.de> List-ID: The exclusive gates may be set up in the wrong way by software running before the clock driver comes up. In that case the exclusive setup is locked in its initial state, as the complementary function can't be activated without disabling the initial setup first. To avoid this lock situation, reset the exclusive gates to the off state and allow the kernel to provide the proper setup. Signed-off-by: Lucas Stach --- drivers/clk/imx/clk-imx6q.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c index b9ea7037e193..9059a369ae95 100644 --- a/drivers/clk/imx/clk-imx6q.c +++ b/drivers/clk/imx/clk-imx6q.c @@ -515,8 +515,12 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) * lvds1_gate and lvds2_gate are pseudo-gates. Both can be * independently configured as clock inputs or outputs. We treat * the "output_enable" bit as a gate, even though it's really just - * enabling clock output. + * enabling clock output. Initially the gate bits are cleared, as + * otherwise the exclusive configuration gets locked in the setup done + * by software running before the clock driver, with no way to change + * it. */ + writel(readl(base + 0x160) & ~0x3c00, base + 0x160); clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate_exclusive("lvds1_gate", "lvds1_sel", base + 0x160, 10, BIT(12)); clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate_exclusive("lvds2_gate", "lvds2_sel", base + 0x160, 11, BIT(13)); -- 2.18.0