Linux-Clk Archive on lore.kernel.org
 help / Atom feed
* [PATCH v2 0/7] Enable rk3066 VOP and HDMI for MK808
@ 2018-12-29 13:33 Johan Jonker
  2018-12-29 13:33 ` [PATCH v2 1/7] ARM: dts: rockchip: rk3066: add HCLK_HDMI to pmu node Johan Jonker
                   ` (6 more replies)
  0 siblings, 7 replies; 14+ messages in thread
From: Johan Jonker @ 2018-12-29 13:33 UTC (permalink / raw)
  To: heiko
  Cc: hjc, airlied, robh+dt, mark.rutland, mturquette, sboyd,
	dri-devel, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, linux-clk

DISCLAIMER: Use at your own risk.
For testing only!

Version: V2

Title: Enable rk3066 VOP and HDMI for MK808.

This patch serie only works in combination with a MK808 TV stick and
a rk3066 processor. Other boxes and tablets with a rk3066
need extra software for power management and lcd's.

What does it do:

With these 7 kernel patches a MK808 can show 2 penquins and a console
on a DVI-D monitor in combination with a framebuffer.

Not tested:

HDMI TV
DRM
Xorg
Display managers
Android
etc.

Problems:

Fixed screen size for DVI-D.
HDMI sound not included.
etc.

///////////////////////////////////////////

# How to make rkfs.cpio

find . | cpio -o --format=newc > ../rkfs.cpio

# How to compile/flash

make menuconfig  ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi-
make -j4  ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi-

cp ./arch/arm/boot/zImage ../zImage-dtb
cat ./arch/arm/boot/dts/rk3066a-mk808.dtb >> ../zImage-dtb
../tools/rkcrc -k ../zImage-dtb ../mk808.img
sudo ../tools/rkflashtool w 0x4000 0x8000 < ../mk808.img
sudo ../tools/rkflashtool b

///////////////////////////////////////////

Finley Xiao (1):
  clk: rockchip: rk3188: add CLK_SET_RATE_PARENT for lcdc dclk

Johan Jonker (2):
  ARM: dts: rockchip: rk3066: add HCLK_HDMI to pmu node
  ARM: dts: rockchip: rk3066a-mk808: enable vop0 and hdmi nodes

Mark Yao (2):
  drm: rockchip: vop: add rk3066 vop definitions
  ARM: dts: rockchip: add rk3066 vop display nodes

Zheng Yang (2):
  drm: rockchip: introduce rk3066 hdmi
  ARM: dts: rockchip: add rk3066 hdmi nodes

 .../bindings/display/rockchip/rockchip-vop.txt     |   1 +
 arch/arm/boot/dts/rk3066a-mk808.dts                |  12 +
 arch/arm/boot/dts/rk3066a.dtsi                     |  92 ++
 drivers/clk/rockchip/clk-rk3188.c                  |   4 +-
 drivers/gpu/drm/rockchip/Kconfig                   |   8 +
 drivers/gpu/drm/rockchip/Makefile                  |   1 +
 drivers/gpu/drm/rockchip/rk3066_hdmi.c             | 928 +++++++++++++++++++++
 drivers/gpu/drm/rockchip/rk3066_hdmi.h             | 235 ++++++
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c        |   2 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.h        |   1 +
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c        | 110 +++
 drivers/gpu/drm/rockchip/rockchip_vop_reg.h        |  53 ++
 12 files changed, 1445 insertions(+), 2 deletions(-)
 create mode 100644 drivers/gpu/drm/rockchip/rk3066_hdmi.c
 create mode 100644 drivers/gpu/drm/rockchip/rk3066_hdmi.h

-- 
2.11.0


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v2 1/7] ARM: dts: rockchip: rk3066: add HCLK_HDMI to pmu node
  2018-12-29 13:33 [PATCH v2 0/7] Enable rk3066 VOP and HDMI for MK808 Johan Jonker
@ 2018-12-29 13:33 ` Johan Jonker
  2018-12-30 14:03   ` Heiko Stuebner
  2018-12-29 13:33 ` [PATCH v2 2/7] clk: rockchip: rk3188: add CLK_SET_RATE_PARENT for lcdc dclk Johan Jonker
                   ` (5 subsequent siblings)
  6 siblings, 1 reply; 14+ messages in thread
From: Johan Jonker @ 2018-12-29 13:33 UTC (permalink / raw)
  To: heiko
  Cc: hjc, airlied, robh+dt, mark.rutland, mturquette, sboyd,
	dri-devel, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, linux-clk

A MK808 TV stick with rk3066 processor
boots normal with logo and console,
but after booting the monitor remains black.
This patch fixes a vblank wait time out
by adding HCLK_HDMI to the pmu node.
The HCLK_HDMI clock is now part of the logic
that enables the RK3066_PD_VIO power domain.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 arch/arm/boot/dts/rk3066a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 30dc8af0b..b6b3a77da 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -669,6 +669,7 @@
 				 <&cru SCLK_CIF0>,
 				 <&cru ACLK_CIF0>,
 				 <&cru HCLK_CIF0>,
+				 <&cru HCLK_HDMI>,
 				 <&cru ACLK_IPP>,
 				 <&cru HCLK_IPP>,
 				 <&cru ACLK_RGA>,
-- 
2.11.0


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v2 2/7] clk: rockchip: rk3188: add CLK_SET_RATE_PARENT for lcdc dclk
  2018-12-29 13:33 [PATCH v2 0/7] Enable rk3066 VOP and HDMI for MK808 Johan Jonker
  2018-12-29 13:33 ` [PATCH v2 1/7] ARM: dts: rockchip: rk3066: add HCLK_HDMI to pmu node Johan Jonker
@ 2018-12-29 13:33 ` Johan Jonker
  2018-12-30 17:05   ` Heiko Stuebner
  2018-12-29 13:33 ` [PATCH v2 3/7] drm: rockchip: vop: add rk3066 vop definitions Johan Jonker
                   ` (4 subsequent siblings)
  6 siblings, 1 reply; 14+ messages in thread
From: Johan Jonker @ 2018-12-29 13:33 UTC (permalink / raw)
  To: heiko
  Cc: hjc, airlied, robh+dt, mark.rutland, mturquette, sboyd,
	dri-devel, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, linux-clk

From: Finley Xiao <finley.xiao@rock-chips.com>

Add CLK_SET_RATE_PARENT for lcdc dclk.

Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 drivers/clk/rockchip/clk-rk3188.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c
index 7ea20341e..5ecf28854 100644
--- a/drivers/clk/rockchip/clk-rk3188.c
+++ b/drivers/clk/rockchip/clk-rk3188.c
@@ -586,12 +586,12 @@ static struct rockchip_clk_branch rk3066a_clk_branches[] __initdata = {
 	COMPOSITE(0, "dclk_lcdc0_src", mux_pll_src_cpll_gpll_p, 0,
 			RK2928_CLKSEL_CON(27), 0, 1, MFLAGS, 8, 8, DFLAGS,
 			RK2928_CLKGATE_CON(3), 1, GFLAGS),
-	MUX(DCLK_LCDC0, "dclk_lcdc0", mux_rk3066_lcdc0_p, 0,
+	MUX(DCLK_LCDC0, "dclk_lcdc0", mux_rk3066_lcdc0_p, CLK_SET_RATE_PARENT,
 			RK2928_CLKSEL_CON(27), 4, 1, MFLAGS),
 	COMPOSITE(0, "dclk_lcdc1_src", mux_pll_src_cpll_gpll_p, 0,
 			RK2928_CLKSEL_CON(28), 0, 1, MFLAGS, 8, 8, DFLAGS,
 			RK2928_CLKGATE_CON(3), 2, GFLAGS),
-	MUX(DCLK_LCDC1, "dclk_lcdc1", mux_rk3066_lcdc1_p, 0,
+	MUX(DCLK_LCDC1, "dclk_lcdc1", mux_rk3066_lcdc1_p, CLK_SET_RATE_PARENT,
 			RK2928_CLKSEL_CON(28), 4, 1, MFLAGS),
 
 	COMPOSITE_NOMUX(0, "cif1_pre", "cif_src", 0,
-- 
2.11.0


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v2 3/7] drm: rockchip: vop: add rk3066 vop definitions
  2018-12-29 13:33 [PATCH v2 0/7] Enable rk3066 VOP and HDMI for MK808 Johan Jonker
  2018-12-29 13:33 ` [PATCH v2 1/7] ARM: dts: rockchip: rk3066: add HCLK_HDMI to pmu node Johan Jonker
  2018-12-29 13:33 ` [PATCH v2 2/7] clk: rockchip: rk3188: add CLK_SET_RATE_PARENT for lcdc dclk Johan Jonker
@ 2018-12-29 13:33 ` Johan Jonker
  2018-12-30 17:22   ` Heiko Stuebner
  2018-12-29 13:33 ` [PATCH v2 4/7] drm: rockchip: introduce rk3066 hdmi Johan Jonker
                   ` (3 subsequent siblings)
  6 siblings, 1 reply; 14+ messages in thread
From: Johan Jonker @ 2018-12-29 13:33 UTC (permalink / raw)
  To: heiko
  Cc: hjc, airlied, robh+dt, mark.rutland, mturquette, sboyd,
	dri-devel, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, linux-clk

From: Mark Yao <mark.yao@rock-chips.com>

This patch adds the rk3066 VOP definitions.

The VOP or LCD Controller serves as interface between
framebuffer memory and a display device (LCD panel or TV set).

This SOC has two symmetrical LCDC's for a dual panel application.

A LCDC has 5 display layers.
Only 3 are used here.

- Video layer 0 (Win0)
- Video layer 1 (Win1)
- OSD layer     (Win2)

Win0 and Win1 are exchangeable.
Maximum resolution is 1920x1080.

The LCDC0 output is connected to:
- LCDC0 IO (without IOMUX)
- HDMI TX video input

The LCDC1 output is connected to:
- LCDC1 IO (with IOMUX)
- HDMI TX video input

The HDMI TX input can switch between LCDC0 and LCDC1.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 .../bindings/display/rockchip/rockchip-vop.txt     |   1 +
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c        | 110 +++++++++++++++++++++
 drivers/gpu/drm/rockchip/rockchip_vop_reg.h        |  53 ++++++++++
 3 files changed, 164 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
index b79e5769f..4f58c5a2d 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
@@ -10,6 +10,7 @@ Required properties:
 		"rockchip,rk3126-vop";
 		"rockchip,px30-vop-lit";
 		"rockchip,px30-vop-big";
+		"rockchip,rk3066-vop";
 		"rockchip,rk3188-vop";
 		"rockchip,rk3288-vop";
 		"rockchip,rk3368-vop";
diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
index a6db3cd55..2799c7e8e 100644
--- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
+++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
@@ -299,6 +299,114 @@ static const struct vop_data px30_vop_lit = {
 	.win_size = ARRAY_SIZE(px30_vop_lit_win_data),
 };
 
+static const struct vop_scl_regs rk3066_win_scl = {
+	.scale_yrgb_x = VOP_REG(RK3066_WIN0_SCL_FACTOR_YRGB, 0xffff, 0x0),
+	.scale_yrgb_y = VOP_REG(RK3066_WIN0_SCL_FACTOR_YRGB, 0xffff, 16),
+	.scale_cbcr_x = VOP_REG(RK3066_WIN0_SCL_FACTOR_CBR, 0xffff, 0x0),
+	.scale_cbcr_y = VOP_REG(RK3066_WIN0_SCL_FACTOR_CBR, 0xffff, 16),
+};
+
+static const struct vop_win_phy rk3066_win0_data = {
+	.scl = &rk3066_win_scl,
+	.data_formats = formats_win_full,
+	.nformats = ARRAY_SIZE(formats_win_full),
+	.enable = VOP_REG(RK3066_SYS_CTRL1, 0x1, 0),
+	.format = VOP_REG(RK3066_SYS_CTRL0, 0x7, 4),
+	.rb_swap = VOP_REG(RK3066_SYS_CTRL0, 0x1, 19),
+	.act_info = VOP_REG(RK3066_WIN0_ACT_INFO, 0x1fff1fff, 0),
+	.dsp_info = VOP_REG(RK3066_WIN0_DSP_INFO, 0x0fff0fff, 0),
+	.dsp_st = VOP_REG(RK3066_WIN0_DSP_ST, 0x1fff1fff, 0),
+	.yrgb_mst = VOP_REG(RK3066_WIN0_YRGB_MST0, 0xffffffff, 0),
+	.uv_mst = VOP_REG(RK3066_WIN0_CBR_MST0, 0xffffffff, 0),
+	.yrgb_vir = VOP_REG(RK3066_WIN0_VIR, 0xffff, 0),
+	.uv_vir = VOP_REG(RK3066_WIN0_VIR, 0x1fff, 16),
+};
+
+static const struct vop_win_phy rk3066_win1_data = {
+	.scl = &rk3066_win_scl,
+	.data_formats = formats_win_full,
+	.nformats = ARRAY_SIZE(formats_win_full),
+	.enable = VOP_REG(RK3066_SYS_CTRL1, 0x1, 1),
+	.format = VOP_REG(RK3066_SYS_CTRL0, 0x7, 7),
+	.rb_swap = VOP_REG(RK3066_SYS_CTRL0, 0x1, 23),
+	.act_info = VOP_REG(RK3066_WIN1_ACT_INFO, 0x1fff1fff, 0),
+	.dsp_info = VOP_REG(RK3066_WIN1_DSP_INFO, 0x0fff0fff, 0),
+	.dsp_st = VOP_REG(RK3066_WIN1_DSP_ST, 0x1fff1fff, 0),
+	.yrgb_mst = VOP_REG(RK3066_WIN1_YRGB_MST, 0xffffffff, 0),
+	.uv_mst = VOP_REG(RK3066_WIN1_CBR_MST, 0xffffffff, 0),
+	.yrgb_vir = VOP_REG(RK3066_WIN1_VIR, 0xffff, 0),
+	.uv_vir = VOP_REG(RK3066_WIN1_VIR, 0x1fff, 16),
+};
+
+static const struct vop_win_phy rk3066_win2_data = {
+	.data_formats = formats_win_lite,
+	.nformats = ARRAY_SIZE(formats_win_lite),
+	.enable = VOP_REG(RK3066_SYS_CTRL1, 0x1, 2),
+	.format = VOP_REG(RK3066_SYS_CTRL0, 0x7, 10),
+	.rb_swap = VOP_REG(RK3066_SYS_CTRL0, 0x1, 27),
+	.dsp_info = VOP_REG(RK3066_WIN2_DSP_INFO, 0x0fff0fff, 0),
+	.dsp_st = VOP_REG(RK3066_WIN2_DSP_ST, 0x1fff1fff, 0),
+	.yrgb_mst = VOP_REG(RK3066_WIN2_MST, 0xffffffff, 0),
+	.yrgb_vir = VOP_REG(RK3066_WIN2_VIR, 0xffff, 0),
+};
+
+static const struct vop_modeset rk3066_modeset = {
+	.htotal_pw = VOP_REG(RK3066_DSP_HTOTAL_HS_END, 0x1fff1fff, 0),
+	.hact_st_end = VOP_REG(RK3066_DSP_HACT_ST_END, 0x1fff1fff, 0),
+	.vtotal_pw = VOP_REG(RK3066_DSP_VTOTAL_VS_END, 0x1fff1fff, 0),
+	.vact_st_end = VOP_REG(RK3066_DSP_VACT_ST_END, 0x1fff1fff, 0),
+};
+
+static const struct vop_output rk3066_output = {
+	.pin_pol = VOP_REG(RK3066_DSP_CTRL0, 0x7, 4),
+};
+
+static const struct vop_common rk3066_common = {
+	.standby = VOP_REG(RK3066_SYS_CTRL0, 0x1, 1),
+	.out_mode = VOP_REG(RK3066_DSP_CTRL0, 0xf, 0),
+	.cfg_done = VOP_REG(RK3066_REG_CFG_DONE, 0x1, 0),
+	.dsp_blank = VOP_REG(RK3066_DSP_CTRL1, 0x1, 24),
+};
+
+static const struct vop_win_data rk3066_vop_win_data[] = {
+	{ .base = 0x00, .phy = &rk3066_win0_data,
+	  .type = DRM_PLANE_TYPE_PRIMARY },
+	{ .base = 0x00, .phy = &rk3066_win1_data,
+	  .type = DRM_PLANE_TYPE_OVERLAY },
+	{ .base = 0x00, .phy = &rk3066_win2_data,
+	  .type = DRM_PLANE_TYPE_CURSOR },
+};
+
+static const int rk3066_vop_intrs[] = {
+	/*
+	 * hs_start interrupt fires at frame-start, so serves
+	 * the same purpose as dsp_hold in the driver.
+	 */
+	DSP_HOLD_VALID_INTR,
+	FS_INTR,
+	LINE_FLAG_INTR,
+	BUS_ERROR_INTR,
+};
+
+static const struct vop_intr rk3066_intr = {
+	.intrs = rk3066_vop_intrs,
+	.nintrs = ARRAY_SIZE(rk3066_vop_intrs),
+	.line_flag_num[0] = VOP_REG(RK3066_INT_STATUS, 0xfff, 12),
+	.status = VOP_REG(RK3066_INT_STATUS, 0xf, 0),
+	.enable = VOP_REG(RK3066_INT_STATUS, 0xf, 4),
+	.clear = VOP_REG(RK3066_INT_STATUS, 0xf, 8),
+};
+
+static const struct vop_data rk3066_vop = {
+	.version = VOP_VERSION(2, 1),
+	.intr = &rk3066_intr,
+	.common = &rk3066_common,
+	.modeset = &rk3066_modeset,
+	.output = &rk3066_output,
+	.win = rk3066_vop_win_data,
+	.win_size = ARRAY_SIZE(rk3066_vop_win_data),
+};
+
 static const struct vop_scl_regs rk3188_win_scl = {
 	.scale_yrgb_x = VOP_REG(RK3188_WIN0_SCL_FACTOR_YRGB, 0xffff, 0x0),
 	.scale_yrgb_y = VOP_REG(RK3188_WIN0_SCL_FACTOR_YRGB, 0xffff, 16),
@@ -754,6 +862,8 @@ static const struct of_device_id vop_driver_dt_match[] = {
 	  .data = &px30_vop_big },
 	{ .compatible = "rockchip,px30-vop-lit",
 	  .data = &px30_vop_lit },
+	{ .compatible = "rockchip,rk3066-vop",
+	  .data = &rk3066_vop },
 	{ .compatible = "rockchip,rk3188-vop",
 	  .data = &rk3188_vop },
 	{ .compatible = "rockchip,rk3288-vop",
diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.h b/drivers/gpu/drm/rockchip/rockchip_vop_reg.h
index 7348c6835..d837d4a7d 100644
--- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.h
+++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.h
@@ -983,4 +983,57 @@
 #define RK3188_REG_CFG_DONE		0x90
 /* rk3188 register definition end */
 
+/* rk3066 register definition */
+#define RK3066_SYS_CTRL0		0x00
+#define RK3066_SYS_CTRL1		0x04
+#define RK3066_DSP_CTRL0		0x08
+#define RK3066_DSP_CTRL1		0x0c
+#define RK3066_INT_STATUS		0x10
+#define RK3066_MCU_CTRL			0x14
+#define RK3066_BLEND_CTRL		0x18
+#define RK3066_WIN0_COLOR_KEY_CTRL	0x1c
+#define RK3066_WIN1_COLOR_KEY_CTRL	0x20
+#define RK3066_WIN2_COLOR_KEY_CTRL	0x24
+#define RK3066_WIN0_YRGB_MST0		0x28
+#define RK3066_WIN0_CBR_MST0		0x2c
+#define RK3066_WIN0_YRGB_MST1		0x30
+#define RK3066_WIN0_CBR_MST1		0x34
+#define RK3066_WIN0_VIR			0x38
+#define RK3066_WIN0_ACT_INFO		0x3c
+#define RK3066_WIN0_DSP_INFO		0x40
+#define RK3066_WIN0_DSP_ST		0x44
+#define RK3066_WIN0_SCL_FACTOR_YRGB	0x48
+#define RK3066_WIN0_SCL_FACTOR_CBR	0x4c
+#define RK3066_WIN0_SCL_OFFSET		0x50
+#define RK3066_WIN1_YRGB_MST		0x54
+#define RK3066_WIN1_CBR_MST		0x58
+#define RK3066_WIN1_VIR			0x5c
+#define RK3066_WIN1_ACT_INFO		0x60
+#define RK3066_WIN1_DSP_INFO		0x64
+#define RK3066_WIN1_DSP_ST		0x68
+#define RK3066_WIN1_SCL_FACTOR_YRGB	0x6c
+#define RK3066_WIN1_SCL_FACTOR_CBR	0x70
+#define RK3066_WIN1_SCL_OFFSET		0x74
+#define RK3066_WIN2_MST			0x78
+#define RK3066_WIN2_VIR			0x7c
+#define RK3066_WIN2_DSP_INFO		0x80
+#define RK3066_WIN2_DSP_ST		0x84
+#define RK3066_HWC_MST			0x88
+#define RK3066_HWC_DSP_ST		0x8c
+#define RK3066_HWC_COLOR_LUT0		0x90
+#define RK3066_HWC_COLOR_LUT1		0x94
+#define RK3066_HWC_COLOR_LUT2		0x98
+#define RK3066_DSP_HTOTAL_HS_END	0x9c
+#define RK3066_DSP_HACT_ST_END		0xa0
+#define RK3066_DSP_VTOTAL_VS_END	0xa4
+#define RK3066_DSP_VACT_ST_END		0xa8
+#define RK3066_DSP_VS_ST_END_F1		0xac
+#define RK3066_DSP_VACT_ST_END_F1	0xb0
+#define RK3066_REG_CFG_DONE		0xc0
+#define RK3066_MCU_BYPASS_WPORT		0x100
+#define RK3066_MCU_BYPASS_RPORT		0x200
+#define RK3066_WIN2_LUT_ADDR		0x400
+#define RK3066_DSP_LUT_ADDR		0x800
+/* rk3066 register definition end */
+
 #endif /* _ROCKCHIP_VOP_REG_H */
-- 
2.11.0


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v2 4/7] drm: rockchip: introduce rk3066 hdmi
  2018-12-29 13:33 [PATCH v2 0/7] Enable rk3066 VOP and HDMI for MK808 Johan Jonker
                   ` (2 preceding siblings ...)
  2018-12-29 13:33 ` [PATCH v2 3/7] drm: rockchip: vop: add rk3066 vop definitions Johan Jonker
@ 2018-12-29 13:33 ` Johan Jonker
  2018-12-29 13:33 ` [PATCH v2 5/7] ARM: dts: rockchip: add rk3066 vop display nodes Johan Jonker
                   ` (2 subsequent siblings)
  6 siblings, 0 replies; 14+ messages in thread
From: Johan Jonker @ 2018-12-29 13:33 UTC (permalink / raw)
  To: heiko
  Cc: hjc, airlied, robh+dt, mark.rutland, mturquette, sboyd,
	dri-devel, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, linux-clk

From: Zheng Yang <zhengyang@rock-chips.com>

Introduce rk3066 hdmi.

Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 drivers/gpu/drm/rockchip/Kconfig            |   8 +
 drivers/gpu/drm/rockchip/Makefile           |   1 +
 drivers/gpu/drm/rockchip/rk3066_hdmi.c      | 928 ++++++++++++++++++++++++++++
 drivers/gpu/drm/rockchip/rk3066_hdmi.h      | 235 +++++++
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c |   2 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.h |   1 +
 6 files changed, 1175 insertions(+)
 create mode 100644 drivers/gpu/drm/rockchip/rk3066_hdmi.c
 create mode 100644 drivers/gpu/drm/rockchip/rk3066_hdmi.h

diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 26438d457..db284b6c9 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -77,4 +77,12 @@ config ROCKCHIP_RGB
 	  Some Rockchip CRTCs, like rv1108, can directly output parallel
 	  and serial RGB format to panel or connect to a conversion chip.
 	  say Y to enable its driver.
+
+config ROCKCHIP_RK3066_HDMI
+	bool "Rockchip specific extensions for RK3066 HDMI"
+	depends on DRM_ROCKCHIP
+	help
+	  This selects support for Rockchip SoC specific extensions
+	  for the RK3066 HDMI driver. If you want to enable
+	  HDMI on RK3066 based SoC, you should select this option.
 endif
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index 868263ff0..41b3baee4 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -15,5 +15,6 @@ rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o
 rockchipdrm-$(CONFIG_ROCKCHIP_INNO_HDMI) += inno_hdmi.o
 rockchipdrm-$(CONFIG_ROCKCHIP_LVDS) += rockchip_lvds.o
 rockchipdrm-$(CONFIG_ROCKCHIP_RGB) += rockchip_rgb.o
+rockchipdrm-$(CONFIG_ROCKCHIP_RK3066_HDMI) += rk3066_hdmi.o
 
 obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o
diff --git a/drivers/gpu/drm/rockchip/rk3066_hdmi.c b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
new file mode 100644
index 000000000..6e1843b64
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
@@ -0,0 +1,928 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ *    Zheng Yang <zhengyang@rock-chips.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hdmi.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_of.h>
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#include "rk3066_hdmi.h"
+
+#define DEFAULT_PLLA_RATE	30000000
+
+struct hdmi_data_info {
+	int vic;
+	bool sink_is_hdmi;
+	unsigned int enc_in_format;
+	unsigned int enc_out_format;
+	unsigned int colorimetry;
+};
+
+struct rk3066_hdmi_i2c {
+	struct i2c_adapter adap;
+
+	u8 ddc_addr;
+	u8 segment_addr;
+	u8 stat;
+
+	struct mutex lock;	/*for i2c operation*/
+	struct completion cmp;
+};
+
+struct rk3066_hdmi {
+	struct device *dev;
+	struct drm_device *drm_dev;
+	struct regmap *regmap;
+	int irq;
+	struct clk *hclk;
+	void __iomem *regs;
+
+	struct drm_connector	connector;
+	struct drm_encoder	encoder;
+
+	struct rk3066_hdmi_i2c *i2c;
+	struct i2c_adapter *ddc;
+
+	unsigned int tmdsclk;
+
+	struct hdmi_data_info	hdmi_data;
+	struct drm_display_mode previous_mode;
+};
+
+#define to_rk3066_hdmi(x)	container_of(x, struct rk3066_hdmi, x)
+
+static inline u8 hdmi_readb(struct rk3066_hdmi *hdmi, u16 offset)
+{
+	return readl_relaxed(hdmi->regs + offset);
+}
+
+static inline void hdmi_writeb(struct rk3066_hdmi *hdmi, u16 offset, u32 val)
+{
+	writel_relaxed(val, hdmi->regs + offset);
+}
+
+static inline void hdmi_modb(struct rk3066_hdmi *hdmi, u16 offset,
+			     u32 msk, u32 val)
+{
+	u8 temp = hdmi_readb(hdmi, offset) & ~msk;
+
+	temp |= val & msk;
+	hdmi_writeb(hdmi, offset, temp);
+}
+
+static void rk3066_hdmi_i2c_init(struct rk3066_hdmi *hdmi)
+{
+	int ddc_bus_freq;
+
+	ddc_bus_freq = (hdmi->tmdsclk >> 2) / HDMI_SCL_RATE;
+
+	hdmi_writeb(hdmi, HDMI_DDC_BUS_FREQ_L, ddc_bus_freq & 0xFF);
+	hdmi_writeb(hdmi, HDMI_DDC_BUS_FREQ_H, (ddc_bus_freq >> 8) & 0xFF);
+
+	/* Clear the EDID interrupt flag and mute the interrupt */
+	hdmi_modb(hdmi, HDMI_INTR_MASK1, HDMI_INTR_EDID_MASK, 0);
+	hdmi_writeb(hdmi, HDMI_INTR_STATUS1, HDMI_INTR_EDID_MASK);
+}
+
+static inline u8 rk3066_hdmi_get_power_mode(struct rk3066_hdmi *hdmi)
+{
+	return hdmi_readb(hdmi, HDMI_SYS_CTRL) & HDMI_SYS_POWER_MODE_MASK;
+}
+
+static void rk3066_hdmi_set_power_mode(struct rk3066_hdmi *hdmi, int mode)
+{
+	u8 current_mode, next_mode;
+	u8 i = 0;
+
+	current_mode = rk3066_hdmi_get_power_mode(hdmi);
+
+	dev_dbg(hdmi->dev, "mode         :%d\n", mode);
+	dev_dbg(hdmi->dev, "current_mode :%d\n", current_mode);
+
+	if (current_mode == mode)
+		return;
+
+	do {
+		if (current_mode > mode)
+			next_mode = current_mode / 2;
+		else {
+			if (current_mode < HDMI_SYS_POWER_MODE_A)
+				next_mode = HDMI_SYS_POWER_MODE_A;
+			else
+				next_mode = current_mode * 2;
+		}
+
+		dev_dbg(hdmi->dev, "%d: next_mode :%d\n", i, next_mode);
+
+		if (next_mode != HDMI_SYS_POWER_MODE_D) {
+			hdmi_modb(hdmi, HDMI_SYS_CTRL,
+				  HDMI_SYS_POWER_MODE_MASK, next_mode);
+		} else {
+			hdmi_writeb(hdmi, HDMI_SYS_CTRL,
+				    HDMI_SYS_POWER_MODE_D |
+				    HDMI_SYS_PLL_RESET_MASK);
+			usleep_range(90, 100);
+			hdmi_writeb(hdmi, HDMI_SYS_CTRL,
+				    HDMI_SYS_POWER_MODE_D |
+				    HDMI_SYS_PLLB_RESET);
+			usleep_range(90, 100);
+			hdmi_writeb(hdmi, HDMI_SYS_CTRL,
+				    HDMI_SYS_POWER_MODE_D);
+		}
+		current_mode = next_mode;
+		i = i + 1;
+	} while ((next_mode != mode) && (i < 5));
+
+	/*
+	 * When IP controller haven't configured to an accurate video
+	 * timing, DDC_CLK is equal to PLLA freq which is 30MHz,so we
+	 * need to init the TMDS rate to PCLK rate, and reconfigure
+	 * the DDC clock.
+	 */
+	if (mode < HDMI_SYS_POWER_MODE_D)
+		hdmi->tmdsclk = DEFAULT_PLLA_RATE;
+}
+
+static int
+rk3066_hdmi_upload_frame(struct rk3066_hdmi *hdmi, int setup_rc,
+			 union hdmi_infoframe *frame, u32 frame_index,
+			 u32 mask, u32 disable, u32 enable)
+{
+	if (mask)
+		hdmi_modb(hdmi, HDMI_CP_AUTO_SEND_CTRL, mask, disable);
+
+	hdmi_writeb(hdmi, HDMI_CP_BUF_INDEX, frame_index);
+
+	if (setup_rc >= 0) {
+		u8 packed_frame[HDMI_MAXIMUM_INFO_FRAME_SIZE];
+		ssize_t rc, i;
+
+		rc = hdmi_infoframe_pack(frame, packed_frame,
+					 sizeof(packed_frame));
+		if (rc < 0)
+			return rc;
+
+		for (i = 0; i < rc; i++)
+			hdmi_writeb(hdmi, HDMI_CP_BUF_ACC_HB0 + i * 4,
+				    packed_frame[i]);
+
+		if (mask)
+			hdmi_modb(hdmi, HDMI_CP_AUTO_SEND_CTRL, mask, enable);
+	}
+
+	return setup_rc;
+}
+
+static int rk3066_hdmi_config_avi(struct rk3066_hdmi *hdmi,
+				  struct drm_display_mode *mode)
+{
+	union hdmi_infoframe frame;
+	int rc;
+
+	rc = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, mode, false);
+
+	if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_YUV444)
+		frame.avi.colorspace = HDMI_COLORSPACE_YUV444;
+	else if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_YUV422)
+		frame.avi.colorspace = HDMI_COLORSPACE_YUV422;
+	else
+		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
+
+	frame.avi.colorimetry = hdmi->hdmi_data.colorimetry;
+	frame.avi.scan_mode = HDMI_SCAN_MODE_NONE;
+
+	return rk3066_hdmi_upload_frame(hdmi, rc, &frame,
+					HDMI_INFOFRAME_AVI, 0, 0, 0);
+}
+
+static int rk3066_hdmi_config_video_timing(struct rk3066_hdmi *hdmi,
+					   struct drm_display_mode *mode)
+{
+	int value, vsync_offset;
+
+	/* Set detail external video timing polarity and interlace mode */
+	value = HDMI_EXT_VIDEO_SET_EN;
+	value |= mode->flags & DRM_MODE_FLAG_PHSYNC ?
+		 HDMI_VIDEO_HSYNC_ACTIVE_HIGH : HDMI_VIDEO_HSYNC_ACTIVE_LOW;
+	value |= mode->flags & DRM_MODE_FLAG_PVSYNC ?
+		 HDMI_VIDEO_VSYNC_ACTIVE_HIGH : HDMI_VIDEO_VSYNC_ACTIVE_LOW;
+	value |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
+		 HDMI_VIDEO_MODE_INTERLACE : HDMI_VIDEO_MODE_PROGRESSIVE;
+	if (hdmi->hdmi_data.vic == 2 || hdmi->hdmi_data.vic == 3)
+		vsync_offset = 6;
+	else
+		vsync_offset = 0;
+	value |= vsync_offset << 4;
+	hdmi_writeb(hdmi, HDMI_EXT_VIDEO_PARA, value);
+
+	/* Set detail external video timing */
+	value = mode->htotal;
+	hdmi_writeb(hdmi, HDMI_EXT_HTOTAL_L, value & 0xFF);
+	hdmi_writeb(hdmi, HDMI_EXT_HTOTAL_H, (value >> 8) & 0xFF);
+
+	value = mode->htotal - mode->hdisplay;
+	hdmi_writeb(hdmi, HDMI_EXT_HBLANK_L, value & 0xFF);
+	hdmi_writeb(hdmi, HDMI_EXT_HBLANK_H, (value >> 8) & 0xFF);
+
+	value = mode->htotal - mode->hsync_start;
+	hdmi_writeb(hdmi, HDMI_EXT_HDELAY_L, value & 0xFF);
+	hdmi_writeb(hdmi, HDMI_EXT_HDELAY_H, (value >> 8) & 0xFF);
+
+	value = mode->hsync_end - mode->hsync_start;
+	hdmi_writeb(hdmi, HDMI_EXT_HDURATION_L, value & 0xFF);
+	hdmi_writeb(hdmi, HDMI_EXT_HDURATION_H, (value >> 8) & 0xFF);
+
+	value = mode->vtotal;
+	hdmi_writeb(hdmi, HDMI_EXT_VTOTAL_L, value & 0xFF);
+	hdmi_writeb(hdmi, HDMI_EXT_VTOTAL_H, (value >> 8) & 0xFF);
+
+	value = mode->vtotal - mode->vdisplay;
+	hdmi_writeb(hdmi, HDMI_EXT_VBLANK_L, value & 0xFF);
+
+	value = mode->vtotal - mode->vsync_start + vsync_offset;
+	hdmi_writeb(hdmi, HDMI_EXT_VDELAY, value & 0xFF);
+
+	value = mode->vsync_end - mode->vsync_start;
+	hdmi_writeb(hdmi, HDMI_EXT_VDURATION, value & 0xFF);
+
+	return 0;
+}
+
+static void
+rk3066_hdmi_phy_write(struct rk3066_hdmi *hdmi, u16 offset, u8 value)
+{
+	hdmi_writeb(hdmi, offset, value);
+	hdmi_modb(hdmi, HDMI_SYS_CTRL,
+		  HDMI_SYS_PLL_RESET_MASK, HDMI_SYS_PLL_RESET);
+	usleep_range(90, 100);
+	hdmi_modb(hdmi, HDMI_SYS_CTRL, HDMI_SYS_PLL_RESET_MASK, 0);
+	usleep_range(900, 1000);
+}
+
+static void rk3066_hdmi_config_phy(struct rk3066_hdmi *hdmi)
+{
+	/* tmds frequency same as input dclk */
+	hdmi_writeb(hdmi, HDMI_DEEP_COLOR_MODE, 0x22);
+	if (hdmi->tmdsclk > 100000000) {
+		rk3066_hdmi_phy_write(hdmi, 0x158, 0x0E);
+		rk3066_hdmi_phy_write(hdmi, 0x15c, 0x00);
+		rk3066_hdmi_phy_write(hdmi, 0x160, 0x60);
+		rk3066_hdmi_phy_write(hdmi, 0x164, 0x00);
+		rk3066_hdmi_phy_write(hdmi, 0x168, 0xDA);
+		rk3066_hdmi_phy_write(hdmi, 0x16c, 0xA1);
+		rk3066_hdmi_phy_write(hdmi, 0x170, 0x0e);
+		rk3066_hdmi_phy_write(hdmi, 0x174, 0x22);
+		rk3066_hdmi_phy_write(hdmi, 0x178, 0x00);
+	} else if (hdmi->tmdsclk > 50000000) {
+		rk3066_hdmi_phy_write(hdmi, 0x158, 0x06);
+		rk3066_hdmi_phy_write(hdmi, 0x15c, 0x00);
+		rk3066_hdmi_phy_write(hdmi, 0x160, 0x60);
+		rk3066_hdmi_phy_write(hdmi, 0x164, 0x00);
+		rk3066_hdmi_phy_write(hdmi, 0x168, 0xCA);
+		rk3066_hdmi_phy_write(hdmi, 0x16c, 0xA3);
+		rk3066_hdmi_phy_write(hdmi, 0x170, 0x0e);
+		rk3066_hdmi_phy_write(hdmi, 0x174, 0x20);
+		rk3066_hdmi_phy_write(hdmi, 0x178, 0x00);
+	} else {
+		rk3066_hdmi_phy_write(hdmi, 0x158, 0x02);
+		rk3066_hdmi_phy_write(hdmi, 0x15c, 0x00);
+		rk3066_hdmi_phy_write(hdmi, 0x160, 0x60);
+		rk3066_hdmi_phy_write(hdmi, 0x164, 0x00);
+		rk3066_hdmi_phy_write(hdmi, 0x168, 0xC2);
+		rk3066_hdmi_phy_write(hdmi, 0x16c, 0xA2);
+		rk3066_hdmi_phy_write(hdmi, 0x170, 0x0e);
+		rk3066_hdmi_phy_write(hdmi, 0x174, 0x20);
+		rk3066_hdmi_phy_write(hdmi, 0x178, 0x00);
+	}
+}
+
+static int rk3066_hdmi_setup(struct rk3066_hdmi *hdmi,
+			     struct drm_display_mode *mode)
+{
+	hdmi->hdmi_data.vic = drm_match_cea_mode(mode);
+
+	hdmi->hdmi_data.enc_in_format = HDMI_COLORSPACE_RGB;
+	hdmi->hdmi_data.enc_out_format = HDMI_COLORSPACE_RGB;
+
+	if (hdmi->hdmi_data.vic == 6 || hdmi->hdmi_data.vic == 7 ||
+	    hdmi->hdmi_data.vic == 21 || hdmi->hdmi_data.vic == 22 ||
+	    hdmi->hdmi_data.vic == 2 || hdmi->hdmi_data.vic == 3 ||
+	    hdmi->hdmi_data.vic == 17 || hdmi->hdmi_data.vic == 18)
+		hdmi->hdmi_data.colorimetry = HDMI_COLORIMETRY_ITU_601;
+	else
+		hdmi->hdmi_data.colorimetry = HDMI_COLORIMETRY_ITU_709;
+
+	hdmi->tmdsclk = mode->clock * 1000;
+
+	/* Mute video and audio output */
+	hdmi_modb(hdmi, HDMI_VIDEO_CTRL2, HDMI_VIDEO_AUDIO_DISABLE_MASK,
+		  HDMI_AUDIO_DISABLE | HDMI_VIDEO_DISABLE);
+
+	/* Set power state to mode b */
+	if (rk3066_hdmi_get_power_mode(hdmi) != HDMI_SYS_POWER_MODE_B)
+		rk3066_hdmi_set_power_mode(hdmi, HDMI_SYS_POWER_MODE_B);
+
+	/* Input video mode is RGB24bit, Data enable signal from external */
+	hdmi_modb(hdmi, HDMI_AV_CTRL1,
+		  HDMI_VIDEO_DE_MASK, HDMI_VIDEO_EXTERNAL_DE);
+	hdmi_writeb(hdmi, HDMI_VIDEO_CTRL1,
+		    HDMI_VIDEO_OUTPUT_RGB444 |
+		    HDMI_VIDEO_INPUT_DATA_DEPTH_8BIT |
+		    HDMI_VIDEO_INPUT_COLOR_RGB);
+	hdmi_writeb(hdmi, HDMI_DEEP_COLOR_MODE, 0x20);
+
+	rk3066_hdmi_config_video_timing(hdmi, mode);
+
+	if (hdmi->hdmi_data.sink_is_hdmi) {
+		hdmi_modb(hdmi, HDMI_HDCP_CTRL, HDMI_VIDEO_MODE_MASK,
+			  HDMI_VIDEO_MODE_HDMI);
+	} else {
+		hdmi_modb(hdmi, HDMI_HDCP_CTRL, HDMI_VIDEO_MODE_MASK, 0);
+	}
+
+	rk3066_hdmi_config_avi(hdmi, mode);
+
+	rk3066_hdmi_config_phy(hdmi);
+
+	rk3066_hdmi_set_power_mode(hdmi, HDMI_SYS_POWER_MODE_E);
+
+	/*
+	 * When IP controller have configured to an accurate video
+	 * timing, then the TMDS clock source would be switched to
+	 * DCLK_LCDC, so we need to init the TMDS rate to mode pixel
+	 * clock rate, and reconfigure the DDC clock.
+	 */
+	rk3066_hdmi_i2c_init(hdmi);
+
+	/* Unmute video and audio output */
+	hdmi_modb(hdmi, HDMI_VIDEO_CTRL2,
+		  HDMI_VIDEO_AUDIO_DISABLE_MASK, HDMI_AUDIO_DISABLE);
+	return 0;
+}
+
+static void
+rk3066_hdmi_encoder_mode_set(struct drm_encoder *encoder,
+			     struct drm_display_mode *mode,
+			     struct drm_display_mode *adj_mode)
+{
+	struct rk3066_hdmi *hdmi = to_rk3066_hdmi(encoder);
+
+	/* Store the display mode for plugin/DPMS poweron events */
+	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+}
+
+static void rk3066_hdmi_encoder_enable(struct drm_encoder *encoder)
+{
+	struct rk3066_hdmi *hdmi = to_rk3066_hdmi(encoder);
+	int mux, val;
+
+	mux = drm_of_encoder_active_endpoint_id(hdmi->dev->of_node, encoder);
+	if (mux)
+		val = BIT(30) | BIT(14);
+	else
+		val = BIT(30);
+
+	regmap_write(hdmi->regmap, 0x150, val);
+
+	dev_dbg(hdmi->dev, "hdmi encoder enable select: vop%s\n",
+		(mux) ? "1" : "0");
+
+	rk3066_hdmi_setup(hdmi, &hdmi->previous_mode);
+}
+
+static void rk3066_hdmi_encoder_disable(struct drm_encoder *encoder)
+{
+	struct rk3066_hdmi *hdmi = to_rk3066_hdmi(encoder);
+
+	dev_dbg(hdmi->dev, "hdmi encoder disable\n");
+
+	if (rk3066_hdmi_get_power_mode(hdmi) == HDMI_SYS_POWER_MODE_E) {
+		hdmi_writeb(hdmi, HDMI_VIDEO_CTRL2,
+			    HDMI_VIDEO_AUDIO_DISABLE_MASK);
+		hdmi_modb(hdmi, HDMI_VIDEO_CTRL2,
+			  HDMI_AUDIO_CP_LOGIC_RESET_MASK,
+			  HDMI_AUDIO_CP_LOGIC_RESET);
+		usleep_range(500, 510);
+	}
+	rk3066_hdmi_set_power_mode(hdmi, HDMI_SYS_POWER_MODE_A);
+}
+
+static bool
+rk3066_hdmi_encoder_mode_fixup(struct drm_encoder *encoder,
+			       const struct drm_display_mode *mode,
+			       struct drm_display_mode *adj_mode)
+{
+	return true;
+}
+
+static int
+rk3066_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
+				 struct drm_crtc_state *crtc_state,
+				 struct drm_connector_state *conn_state)
+{
+	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
+
+	s->output_mode = ROCKCHIP_OUT_MODE_P888;
+	s->output_type = DRM_MODE_CONNECTOR_HDMIA;
+
+	return 0;
+}
+
+static const
+struct drm_encoder_helper_funcs rk3066_hdmi_encoder_helper_funcs = {
+	.enable     = rk3066_hdmi_encoder_enable,
+	.disable    = rk3066_hdmi_encoder_disable,
+	.mode_fixup = rk3066_hdmi_encoder_mode_fixup,
+	.mode_set   = rk3066_hdmi_encoder_mode_set,
+	.atomic_check = rk3066_hdmi_encoder_atomic_check,
+};
+
+static const struct drm_encoder_funcs rk3066_hdmi_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+static enum drm_connector_status
+rk3066_hdmi_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct rk3066_hdmi *hdmi = to_rk3066_hdmi(connector);
+
+	return (hdmi_readb(hdmi, HDMI_HPG_MENS_STA) & HDMI_HPG_IN_STATUS_HIGH) ?
+		connector_status_connected : connector_status_disconnected;
+}
+
+static const struct drm_display_mode edid_cea_modes[] = {
+	/* 4 - 1280x720@60Hz 16:9 */
+	{ DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1390,
+		   1430, 1650, 0, 720, 725, 730, 750, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
+	  .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
+};
+
+static int rk3066_hdmi_connector_get_modes(struct drm_connector *connector)
+{
+	struct rk3066_hdmi *hdmi = to_rk3066_hdmi(connector);
+	struct drm_display_mode *mode = NULL;
+	struct edid *edid;
+	int ret = 0;
+
+	if (!hdmi->ddc)
+		return 0;
+
+	hdmi->hdmi_data.sink_is_hdmi = false;
+
+	edid = drm_get_edid(connector, hdmi->ddc);
+	if (edid) {
+		hdmi->hdmi_data.sink_is_hdmi = drm_detect_hdmi_monitor(edid);
+
+		dev_info(hdmi->dev, "monitor type : %s : %dx%d cm\n",
+			(hdmi->hdmi_data.sink_is_hdmi ? "HDMI" : "DVI"),
+			edid->width_cm, edid->height_cm);
+
+		drm_connector_update_edid_property(connector, edid);
+		ret = drm_add_edid_modes(connector, edid);
+		kfree(edid);
+	}
+
+	if ((ret == 0) || (hdmi->hdmi_data.sink_is_hdmi == false)) {
+		hdmi->hdmi_data.sink_is_hdmi = false;
+
+		mode = drm_mode_duplicate(hdmi->drm_dev, &edid_cea_modes[0]);
+		if (!mode)
+			return ret;
+		mode->type |= DRM_MODE_TYPE_PREFERRED;
+		drm_mode_probed_add(connector, mode);
+		ret++;
+
+		dev_info(hdmi->dev, "no CEA mode found, use default\n");
+	}
+
+	return ret;
+}
+
+static enum drm_mode_status
+rk3066_hdmi_connector_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	u32 vic = drm_match_cea_mode(mode);
+
+	if (vic > 1)
+		return MODE_OK;
+	else
+		return MODE_BAD;
+}
+
+static struct drm_encoder *
+rk3066_hdmi_connector_best_encoder(struct drm_connector *connector)
+{
+	struct rk3066_hdmi *hdmi = to_rk3066_hdmi(connector);
+
+	return &hdmi->encoder;
+}
+
+static int
+rk3066_hdmi_probe_single_connector_modes(struct drm_connector *connector,
+					 uint32_t maxX, uint32_t maxY)
+{
+	return drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+}
+
+static void rk3066_hdmi_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_unregister(connector);
+	drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs rk3066_hdmi_connector_funcs = {
+	.fill_modes = rk3066_hdmi_probe_single_connector_modes,
+	.detect = rk3066_hdmi_connector_detect,
+	.destroy = rk3066_hdmi_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static const
+struct drm_connector_helper_funcs rk3066_hdmi_connector_helper_funcs = {
+	.get_modes = rk3066_hdmi_connector_get_modes,
+	.mode_valid = rk3066_hdmi_connector_mode_valid,
+	.best_encoder = rk3066_hdmi_connector_best_encoder,
+};
+
+static int
+rk3066_hdmi_register(struct drm_device *drm, struct rk3066_hdmi *hdmi)
+{
+	struct drm_encoder *encoder = &hdmi->encoder;
+	struct device *dev = hdmi->dev;
+
+	encoder->possible_crtcs =
+		drm_of_find_possible_crtcs(drm, dev->of_node);
+
+	/*
+	 * If we failed to find the CRTC(s) which this encoder is
+	 * supposed to be connected to, it's because the CRTC has
+	 * not been registered yet.  Defer probing, and hope that
+	 * the required CRTC is added later.
+	 */
+	if (encoder->possible_crtcs == 0)
+		return -EPROBE_DEFER;
+
+	dev_info(hdmi->dev, "CRTC found\n");
+
+	drm_encoder_helper_add(encoder, &rk3066_hdmi_encoder_helper_funcs);
+	drm_encoder_init(drm, encoder, &rk3066_hdmi_encoder_funcs,
+			 DRM_MODE_ENCODER_TMDS, NULL);
+
+	hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+	drm_connector_helper_add(&hdmi->connector,
+				 &rk3066_hdmi_connector_helper_funcs);
+	drm_connector_init(drm, &hdmi->connector,
+			   &rk3066_hdmi_connector_funcs,
+			   DRM_MODE_CONNECTOR_HDMIA);
+
+	drm_connector_attach_encoder(&hdmi->connector, encoder);
+
+	return 0;
+}
+
+static irqreturn_t rk3066_hdmi_i2c_irq(struct rk3066_hdmi *hdmi, u8 stat)
+{
+	struct rk3066_hdmi_i2c *i2c = hdmi->i2c;
+
+	if (!(stat & HDMI_INTR_EDID_MASK))
+		return IRQ_NONE;
+
+	i2c->stat = stat;
+
+	complete(&i2c->cmp);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rk3066_hdmi_hardirq(int irq, void *dev_id)
+{
+	struct rk3066_hdmi *hdmi = dev_id;
+	irqreturn_t ret = IRQ_NONE;
+	u8 interrupt;
+
+	if (rk3066_hdmi_get_power_mode(hdmi) == HDMI_SYS_POWER_MODE_A)
+		hdmi_writeb(hdmi, HDMI_SYS_CTRL, HDMI_SYS_POWER_MODE_B);
+
+	interrupt = hdmi_readb(hdmi, HDMI_INTR_STATUS1);
+	if (interrupt)
+		hdmi_writeb(hdmi, HDMI_INTR_STATUS1, interrupt);
+
+	if (hdmi->i2c)
+		ret = rk3066_hdmi_i2c_irq(hdmi, interrupt);
+
+	if (interrupt & (HDMI_INTR_HOTPLUG | HDMI_INTR_MSENS))
+		ret = IRQ_WAKE_THREAD;
+
+	return ret;
+}
+
+static irqreturn_t rk3066_hdmi_irq(int irq, void *dev_id)
+{
+	struct rk3066_hdmi *hdmi = dev_id;
+
+	drm_helper_hpd_irq_event(hdmi->connector.dev);
+
+	return IRQ_HANDLED;
+}
+
+static int rk3066_hdmi_i2c_read(struct rk3066_hdmi *hdmi, struct i2c_msg *msgs)
+{
+	int length = msgs->len;
+	u8 *buf = msgs->buf;
+	int ret;
+
+	ret = wait_for_completion_timeout(&hdmi->i2c->cmp, HZ / 10);
+	if (!ret || hdmi->i2c->stat & HDMI_INTR_EDID_ERR)
+		return -EAGAIN;
+
+	while (length--)
+		*buf++ = hdmi_readb(hdmi, HDMI_DDC_READ_FIFO_ADDR);
+
+	return 0;
+}
+
+static int rk3066_hdmi_i2c_write(struct rk3066_hdmi *hdmi, struct i2c_msg *msgs)
+{
+	/*
+	 * The DDC module only support read EDID message, so
+	 * we assume that each word write to this i2c adapter
+	 * should be the offset of EDID word address.
+	 */
+	if (msgs->len != 1 ||
+	    (msgs->addr != DDC_ADDR && msgs->addr != DDC_SEGMENT_ADDR))
+		return -EINVAL;
+
+	reinit_completion(&hdmi->i2c->cmp);
+
+	if (msgs->addr == DDC_SEGMENT_ADDR)
+		hdmi->i2c->segment_addr = msgs->buf[0];
+	if (msgs->addr == DDC_ADDR)
+		hdmi->i2c->ddc_addr = msgs->buf[0];
+
+	/* Set edid word address 0x00/0x80 */
+	hdmi_writeb(hdmi, HDMI_EDID_WORD_ADDR, hdmi->i2c->ddc_addr);
+
+	/* Set edid segment pointer */
+	hdmi_writeb(hdmi, HDMI_EDID_SEGMENT_POINTER, hdmi->i2c->segment_addr);
+
+	return 0;
+}
+
+static int rk3066_hdmi_i2c_xfer(struct i2c_adapter *adap,
+				struct i2c_msg *msgs, int num)
+{
+	struct rk3066_hdmi *hdmi = i2c_get_adapdata(adap);
+	struct rk3066_hdmi_i2c *i2c = hdmi->i2c;
+	int i, ret = 0;
+
+	mutex_lock(&i2c->lock);
+
+	rk3066_hdmi_i2c_init(hdmi);
+
+	/* Unmute the interrupt */
+	hdmi_modb(hdmi, HDMI_INTR_MASK1,
+		  HDMI_INTR_EDID_MASK, HDMI_INTR_EDID_MASK);
+	i2c->stat = 0;
+
+	for (i = 0; i < num; i++) {
+		dev_dbg(hdmi->dev, "xfer: num: %d/%d, len: %d, flags: %#x\n",
+			i + 1, num, msgs[i].len, msgs[i].flags);
+
+		if (msgs[i].flags & I2C_M_RD)
+			ret = rk3066_hdmi_i2c_read(hdmi, &msgs[i]);
+		else
+			ret = rk3066_hdmi_i2c_write(hdmi, &msgs[i]);
+
+		if (ret < 0)
+			break;
+	}
+
+	if (!ret)
+		ret = num;
+
+	/* Mute HDMI EDID interrupt */
+	hdmi_modb(hdmi, HDMI_INTR_MASK1, HDMI_INTR_EDID_MASK, 0);
+
+	mutex_unlock(&i2c->lock);
+
+	return ret;
+}
+
+static u32 rk3066_hdmi_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm rk3066_hdmi_algorithm = {
+	.master_xfer	= rk3066_hdmi_i2c_xfer,
+	.functionality	= rk3066_hdmi_i2c_func,
+};
+
+static struct i2c_adapter *rk3066_hdmi_i2c_adapter(struct rk3066_hdmi *hdmi)
+{
+	struct i2c_adapter *adap;
+	struct rk3066_hdmi_i2c *i2c;
+	int ret;
+
+	i2c = devm_kzalloc(hdmi->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&i2c->lock);
+	init_completion(&i2c->cmp);
+
+	adap = &i2c->adap;
+	adap->class = I2C_CLASS_DDC;
+	adap->owner = THIS_MODULE;
+	adap->dev.parent = hdmi->dev;
+	adap->dev.of_node = hdmi->dev->of_node;
+	adap->algo = &rk3066_hdmi_algorithm;
+	strlcpy(adap->name, "RK3066 HDMI", sizeof(adap->name));
+	i2c_set_adapdata(adap, hdmi);
+
+	ret = i2c_add_adapter(adap);
+	if (ret) {
+		dev_warn(hdmi->dev, "cannot add %s I2C adapter\n", adap->name);
+		devm_kfree(hdmi->dev, i2c);
+		return ERR_PTR(ret);
+	}
+
+	hdmi->i2c = i2c;
+
+	dev_info(hdmi->dev, "registered %s I2C bus driver\n", adap->name);
+
+	return adap;
+}
+
+static int rk3066_hdmi_bind(struct device *dev, struct device *master,
+			    void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct drm_device *drm = data;
+	struct rk3066_hdmi *hdmi;
+	struct resource *iores;
+	int irq;
+	int ret;
+
+	hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
+	if (!hdmi)
+		return -ENOMEM;
+
+	hdmi->dev = dev;
+	hdmi->drm_dev = drm;
+
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iores)
+		return -ENXIO;
+
+	hdmi->regs = devm_ioremap_resource(dev, iores);
+	if (IS_ERR(hdmi->regs))
+		return PTR_ERR(hdmi->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	hdmi->hclk = devm_clk_get(hdmi->dev, "hclk");
+	if (IS_ERR(hdmi->hclk)) {
+		dev_err(hdmi->dev, "unable to get HDMI hclk clk\n");
+		return PTR_ERR(hdmi->hclk);
+	}
+
+	ret = clk_prepare_enable(hdmi->hclk);
+	if (ret) {
+		dev_err(hdmi->dev, "cannot enable HDMI hclk clock: %d\n", ret);
+		return ret;
+	}
+
+	hdmi->regmap =
+		syscon_regmap_lookup_by_phandle(hdmi->dev->of_node,
+						"rockchip,grf");
+	if (IS_ERR(hdmi->regmap)) {
+		dev_err(hdmi->dev, "unable to get rockchip,grf\n");
+		ret = PTR_ERR(hdmi->regmap);
+		goto err_disable_hclk;
+	}
+
+	/* internal hclk = hdmi_hclk / 25 */
+	hdmi_writeb(hdmi, HDMI_INTERNAL_CLK_DIVIDER, 25);
+
+	hdmi->ddc = rk3066_hdmi_i2c_adapter(hdmi);
+	if (IS_ERR(hdmi->ddc)) {
+		ret = PTR_ERR(hdmi->ddc);
+		hdmi->ddc = NULL;
+		goto err_disable_hclk;
+	}
+
+	rk3066_hdmi_set_power_mode(hdmi, HDMI_SYS_POWER_MODE_B);
+	usleep_range(999, 1000);
+	hdmi_writeb(hdmi, HDMI_INTR_MASK1, HDMI_INTR_HOTPLUG);
+	hdmi_writeb(hdmi, HDMI_INTR_MASK2, 0);
+	hdmi_writeb(hdmi, HDMI_INTR_MASK3, 0);
+	hdmi_writeb(hdmi, HDMI_INTR_MASK4, 0);
+	rk3066_hdmi_set_power_mode(hdmi, HDMI_SYS_POWER_MODE_A);
+
+	ret = rk3066_hdmi_register(drm, hdmi);
+	if (ret)
+		goto err_disable_hclk;
+
+	dev_set_drvdata(dev, hdmi);
+
+	ret = devm_request_threaded_irq(dev, irq, rk3066_hdmi_hardirq,
+					rk3066_hdmi_irq, IRQF_SHARED,
+					dev_name(dev), hdmi);
+	if (ret) {
+		dev_err(hdmi->dev,
+			"failed to request hdmi irq: %d\n", ret);
+		goto err_disable_hclk;
+	}
+
+	return 0;
+
+err_disable_hclk:
+	clk_disable_unprepare(hdmi->hclk);
+
+	return ret;
+}
+
+static void rk3066_hdmi_unbind(struct device *dev, struct device *master,
+			       void *data)
+{
+	struct rk3066_hdmi *hdmi = dev_get_drvdata(dev);
+
+	hdmi->connector.funcs->destroy(&hdmi->connector);
+	hdmi->encoder.funcs->destroy(&hdmi->encoder);
+
+	clk_disable_unprepare(hdmi->hclk);
+	i2c_put_adapter(hdmi->ddc);
+}
+
+static const struct component_ops rk3066_hdmi_ops = {
+	.bind	= rk3066_hdmi_bind,
+	.unbind	= rk3066_hdmi_unbind,
+};
+
+static int rk3066_hdmi_probe(struct platform_device *pdev)
+{
+	return component_add(&pdev->dev, &rk3066_hdmi_ops);
+}
+
+static int rk3066_hdmi_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &rk3066_hdmi_ops);
+
+	return 0;
+}
+
+static const struct of_device_id rk3066_hdmi_dt_ids[] = {
+	{ .compatible = "rockchip,rk3066-hdmi",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, rk3066_hdmi_dt_ids);
+
+struct platform_driver rk3066_hdmi_driver = {
+	.probe  = rk3066_hdmi_probe,
+	.remove = rk3066_hdmi_remove,
+	.driver = {
+		.name = "rockchip-rk3066hdmi",
+		.of_match_table = rk3066_hdmi_dt_ids,
+	},
+};
+
+MODULE_AUTHOR("Zheng Yang <zhengyang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip Specific RK3066-HDMI Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:rockchip-rk3066hdmi");
diff --git a/drivers/gpu/drm/rockchip/rk3066_hdmi.h b/drivers/gpu/drm/rockchip/rk3066_hdmi.h
new file mode 100644
index 000000000..f4c2e2081
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/rk3066_hdmi.h
@@ -0,0 +1,235 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ *    Zheng Yang <zhengyang@rock-chips.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __RK3066_HDMI_H__
+#define __RK3066_HDMI_H__
+
+#define DDC_SEGMENT_ADDR			0x30
+#define HDMI_SCL_RATE				(50 * 1000)
+#define HDMI_MAXIMUM_INFO_FRAME_SIZE		0x11
+
+#define N_32K					0x1000
+#define N_441K					0x1880
+#define N_882K					0x3100
+#define N_1764K					0x6200
+#define N_48K					0x1800
+#define N_96K					0x3000
+#define N_192K					0x6000
+
+#define HDMI_SYS_CTRL				0x000
+#define HDMI_LR_SWAP_N3				0x004
+#define HDMI_N2					0x008
+#define HDMI_N1					0x00c
+#define HDMI_SPDIF_FS_CTS_INT3			0x010
+#define HDMI_CTS_INT2				0x014
+#define HDMI_CTS_INT1				0x018
+#define HDMI_CTS_EXT3				0x01c
+#define HDMI_CTS_EXT2				0x020
+#define HDMI_CTS_EXT1				0x024
+#define HDMI_AUDIO_CTRL1			0x028
+#define HDMI_AUDIO_CTRL2			0x02c
+#define HDMI_I2S_AUDIO_CTRL			0x030
+#define HDMI_I2S_SWAP				0x040
+#define HDMI_AUDIO_STA_BIT_CTRL1		0x044
+#define HDMI_AUDIO_STA_BIT_CTRL2		0x048
+#define HDMI_AUDIO_SRC_NUM_AND_LENGTH		0x050
+#define HDMI_AV_CTRL1				0x054
+#define HDMI_VIDEO_CTRL1			0x058
+#define HDMI_DEEP_COLOR_MODE			0x05c
+
+#define HDMI_EXT_VIDEO_PARA			0x0c0
+#define HDMI_EXT_HTOTAL_L			0x0c4
+#define HDMI_EXT_HTOTAL_H			0x0c8
+#define HDMI_EXT_HBLANK_L			0x0cc
+#define HDMI_EXT_HBLANK_H			0x0d0
+#define HDMI_EXT_HDELAY_L			0x0d4
+#define HDMI_EXT_HDELAY_H			0x0d8
+#define HDMI_EXT_HDURATION_L			0x0dc
+#define HDMI_EXT_HDURATION_H			0x0e0
+#define HDMI_EXT_VTOTAL_L			0x0e4
+#define HDMI_EXT_VTOTAL_H			0x0e8
+#define HDMI_AV_CTRL2				0x0ec
+#define HDMI_EXT_VBLANK_L			0x0f4
+#define HDMI_EXT_VBLANK_H			0x10c
+#define HDMI_EXT_VDELAY				0x0f8
+#define HDMI_EXT_VDURATION			0x0fc
+
+#define HDMI_CP_MANU_SEND_CTRL			0x100
+#define HDMI_CP_AUTO_SEND_CTRL			0x104
+#define HDMI_AUTO_CHECKSUM_OPT			0x108
+
+#define HDMI_VIDEO_CTRL2			0x114
+
+#define HDMI_PHY_OPTION				0x144
+
+#define HDMI_CP_BUF_INDEX			0x17c
+#define HDMI_CP_BUF_ACC_HB0			0x180
+#define HDMI_CP_BUF_ACC_HB1			0x184
+#define HDMI_CP_BUF_ACC_HB2			0x188
+#define HDMI_CP_BUF_ACC_PB0			0x18c
+
+#define HDMI_DDC_READ_FIFO_ADDR			0x200
+#define HDMI_DDC_BUS_FREQ_L			0x204
+#define HDMI_DDC_BUS_FREQ_H			0x208
+#define HDMI_DDC_BUS_CTRL			0x2dc
+#define HDMI_DDC_I2C_LEN			0x278
+#define HDMI_DDC_I2C_OFFSET			0x280
+#define HDMI_DDC_I2C_CTRL			0x284
+#define HDMI_DDC_I2C_READ_BUF0			0x288
+#define HDMI_DDC_I2C_READ_BUF1			0x28c
+#define HDMI_DDC_I2C_READ_BUF2			0x290
+#define HDMI_DDC_I2C_READ_BUF3			0x294
+#define HDMI_DDC_I2C_WRITE_BUF0			0x298
+#define HDMI_DDC_I2C_WRITE_BUF1			0x29c
+#define HDMI_DDC_I2C_WRITE_BUF2			0x2a0
+#define HDMI_DDC_I2C_WRITE_BUF3			0x2a4
+#define HDMI_DDC_I2C_WRITE_BUF4			0x2ac
+#define HDMI_DDC_I2C_WRITE_BUF5			0x2b0
+#define HDMI_DDC_I2C_WRITE_BUF6			0x2b4
+
+#define HDMI_INTR_MASK1				0x248
+#define HDMI_INTR_MASK2				0x24c
+#define HDMI_INTR_STATUS1			0x250
+#define HDMI_INTR_STATUS2			0x254
+#define HDMI_INTR_MASK3				0x258
+#define HDMI_INTR_MASK4				0x25c
+#define HDMI_INTR_STATUS3			0x260
+#define HDMI_INTR_STATUS4			0x264
+
+#define HDMI_HDCP_CTRL				0x2bc
+
+#define HDMI_EDID_SEGMENT_POINTER		0x310
+#define HDMI_EDID_WORD_ADDR			0x314
+#define HDMI_EDID_FIFO_ADDR			0x318
+
+#define HDMI_HPG_MENS_STA			0x37c
+
+#define HDMI_INTERNAL_CLK_DIVIDER		0x800
+
+enum {
+	/* HDMI_SYS_CTRL */
+	HDMI_SYS_POWER_MODE_MASK = 0xf0,
+	HDMI_SYS_POWER_MODE_A = 0x10,
+	HDMI_SYS_POWER_MODE_B = 0x20,
+	HDMI_SYS_POWER_MODE_D = 0x40,
+	HDMI_SYS_POWER_MODE_E = 0x80,
+	HDMI_SYS_PLL_RESET_MASK = 0x0c,
+	HDMI_SYS_PLL_RESET = 0x0c,
+	HDMI_SYS_PLLB_RESET = 0x08,
+
+	/* HDMI_LR_SWAP_N3 */
+	HDMI_AUDIO_LR_SWAP_MASK = 0xf0,
+	HDMI_AUDIO_LR_SWAP_SUBPACKET0 = 0x10,
+	HDMI_AUDIO_LR_SWAP_SUBPACKET1 = 0x20,
+	HDMI_AUDIO_LR_SWAP_SUBPACKET2 = 0x40,
+	HDMI_AUDIO_LR_SWAP_SUBPACKET3 = 0x80,
+	HDMI_AUDIO_N_19_16_MASK = 0x0f,
+
+	/* HDMI_AUDIO_CTRL1 */
+	HDMI_AUDIO_EXTERNAL_CTS = BIT(7),
+	HDMI_AUDIO_INPUT_IIS = 0,
+	HDMI_AUDIO_INPUT_SPDIF = 0x08,
+	HDMI_AUDIO_INPUT_MCLK_ACTIVE = 0x04,
+	HDMI_AUDIO_INPUT_MCLK_DEACTIVE = 0,
+	HDMI_AUDIO_INPUT_MCLK_RATE_128X = 0,
+	HDMI_AUDIO_INPUT_MCLK_RATE_256X = 1,
+	HDMI_AUDIO_INPUT_MCLK_RATE_384X = 2,
+	HDMI_AUDIO_INPUT_MCLK_RATE_512X = 3,
+
+	/* HDMI_I2S_AUDIO_CTRL */
+	HDMI_AUDIO_I2S_FORMAT_STANDARD = 0,
+	HDMI_AUDIO_I2S_CHANNEL_1_2 = 0x04,
+	HDMI_AUDIO_I2S_CHANNEL_3_4 = 0x0c,
+	HDMI_AUDIO_I2S_CHANNEL_5_6 = 0x1c,
+	HDMI_AUDIO_I2S_CHANNEL_7_8 = 0x3c,
+
+	/* HDMI_AV_CTRL1 */
+	HDMI_AUDIO_SAMPLE_FRE_MASK = 0xf0,
+	HDMI_AUDIO_SAMPLE_FRE_32000 = 0x30,
+	HDMI_AUDIO_SAMPLE_FRE_44100 = 0,
+	HDMI_AUDIO_SAMPLE_FRE_48000 = 0x20,
+	HDMI_AUDIO_SAMPLE_FRE_88200 = 0x80,
+	HDMI_AUDIO_SAMPLE_FRE_96000 = 0xa0,
+	HDMI_AUDIO_SAMPLE_FRE_176400 = 0xc0,
+	HDMI_AUDIO_SAMPLE_FRE_192000 = 0xe0,
+	HDMI_AUDIO_SAMPLE_FRE_768000 = 0x90,
+
+	HDMI_VIDEO_INPUT_FORMAT_MASK = 0x0e,
+	HDMI_VIDEO_INPUT_RGB_YCBCR444 = 0,
+	HDMI_VIDEO_INPUT_YCBCR422 = 0x02,
+	HDMI_VIDEO_DE_MASK = 0x1,
+	HDMI_VIDEO_INTERNAL_DE = 0,
+	HDMI_VIDEO_EXTERNAL_DE = 0x01,
+
+	/* HDMI_VIDEO_CTRL1 */
+	HDMI_VIDEO_OUTPUT_FORMAT_MASK = 0xc0,
+	HDMI_VIDEO_OUTPUT_RGB444 = 0,
+	HDMI_VIDEO_OUTPUT_YCBCR444 = 0x40,
+	HDMI_VIDEO_OUTPUT_YCBCR422 = 0x80,
+	HDMI_VIDEO_INPUT_DATA_DEPTH_MASK = 0x30,
+	HDMI_VIDEO_INPUT_DATA_DEPTH_12BIT = 0,
+	HDMI_VIDEO_INPUT_DATA_DEPTH_10BIT = 0x10,
+	HDMI_VIDEO_INPUT_DATA_DEPTH_8BIT = 0x30,
+	HDMI_VIDEO_INPUT_COLOR_MASK = 1,
+	HDMI_VIDEO_INPUT_COLOR_RGB = 0,
+	HDMI_VIDEO_INPUT_COLOR_YCBCR = 1,
+
+	/* HDMI_EXT_VIDEO_PARA */
+	HDMI_VIDEO_VSYNC_OFFSET_SHIFT = 4,
+	HDMI_VIDEO_VSYNC_ACTIVE_HIGH = BIT(3),
+	HDMI_VIDEO_VSYNC_ACTIVE_LOW = 0,
+	HDMI_VIDEO_HSYNC_ACTIVE_HIGH = BIT(2),
+	HDMI_VIDEO_HSYNC_ACTIVE_LOW = 0,
+	HDMI_VIDEO_MODE_INTERLACE = BIT(1),
+	HDMI_VIDEO_MODE_PROGRESSIVE = 0,
+	HDMI_EXT_VIDEO_SET_EN = BIT(0),
+
+	/* HDMI_CP_AUTO_SEND_CTRL */
+
+	/* HDMI_VIDEO_CTRL2 */
+	HDMI_VIDEO_AV_MUTE_MASK = 0xc0,
+	HDMI_VIDEO_CLR_AV_MUTE = BIT(7),
+	HDMI_VIDEO_SET_AV_MUTE = BIT(6),
+	HDMI_AUDIO_CP_LOGIC_RESET_MASK = BIT(2),
+	HDMI_AUDIO_CP_LOGIC_RESET = BIT(2),
+	HDMI_VIDEO_AUDIO_DISABLE_MASK = 0x3,
+	HDMI_AUDIO_DISABLE = BIT(1),
+	HDMI_VIDEO_DISABLE = BIT(0),
+
+	/* HDMI_CP_BUF_INDEX */
+	HDMI_INFOFRAME_VSI = 0x05,
+	HDMI_INFOFRAME_AVI = 0x06,
+	HDMI_INFOFRAME_AAI = 0x08,
+
+	/* HDMI_INTR_MASK1 */
+	/* HDMI_INTR_STATUS1 */
+	HDMI_INTR_HOTPLUG = BIT(7),
+	HDMI_INTR_MSENS = BIT(6),
+	HDMI_INTR_VSYNC = BIT(5),
+	HDMI_INTR_AUDIO_FIFO_FULL = BIT(4),
+	HDMI_INTR_EDID_MASK = 0x6,
+	HDMI_INTR_EDID_READY = BIT(2),
+	HDMI_INTR_EDID_ERR = BIT(1),
+
+	/* HDMI_HDCP_CTRL */
+	HDMI_VIDEO_MODE_MASK = BIT(1),
+	HDMI_VIDEO_MODE_HDMI = BIT(1),
+
+	/* HDMI_HPG_MENS_STA */
+	HDMI_HPG_IN_STATUS_HIGH = BIT(7),
+	HDMI_MSENS_IN_STATUS_HIGH = BIT(6),
+};
+
+#endif /* __RK3066_HDMI_H__ */
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index 941f35233..1f0c592b3 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -492,6 +492,8 @@ static int __init rockchip_drm_init(void)
 	ADD_ROCKCHIP_SUB_DRIVER(dw_mipi_dsi_driver,
 				CONFIG_ROCKCHIP_DW_MIPI_DSI);
 	ADD_ROCKCHIP_SUB_DRIVER(inno_hdmi_driver, CONFIG_ROCKCHIP_INNO_HDMI);
+	ADD_ROCKCHIP_SUB_DRIVER(rk3066_hdmi_driver,
+				CONFIG_ROCKCHIP_RK3066_HDMI);
 
 	ret = platform_register_drivers(rockchip_sub_drivers,
 					num_rockchip_sub_drivers);
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
index 21a023a97..d03890314 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
@@ -72,4 +72,5 @@ extern struct platform_driver inno_hdmi_driver;
 extern struct platform_driver rockchip_dp_driver;
 extern struct platform_driver rockchip_lvds_driver;
 extern struct platform_driver vop_platform_driver;
+extern struct platform_driver rk3066_hdmi_driver;
 #endif /* _ROCKCHIP_DRM_DRV_H_ */
-- 
2.11.0


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v2 5/7] ARM: dts: rockchip: add rk3066 vop display nodes
  2018-12-29 13:33 [PATCH v2 0/7] Enable rk3066 VOP and HDMI for MK808 Johan Jonker
                   ` (3 preceding siblings ...)
  2018-12-29 13:33 ` [PATCH v2 4/7] drm: rockchip: introduce rk3066 hdmi Johan Jonker
@ 2018-12-29 13:33 ` Johan Jonker
  2019-01-12 19:24   ` Heiko Stuebner
  2018-12-29 13:33 ` [PATCH v2 6/7] ARM: dts: rockchip: add rk3066 hdmi nodes Johan Jonker
  2018-12-29 13:33 ` [PATCH v2 7/7] ARM: dts: rockchip: rk3066a-mk808: enable vop0 and " Johan Jonker
  6 siblings, 1 reply; 14+ messages in thread
From: Johan Jonker @ 2018-12-29 13:33 UTC (permalink / raw)
  To: heiko
  Cc: hjc, airlied, robh+dt, mark.rutland, mturquette, sboyd,
	dri-devel, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, linux-clk

From: Mark Yao <mark.yao@rock-chips.com>

This patch adds the core display subsystem and vop nodes to rk3066.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 arch/arm/boot/dts/rk3066a.dtsi | 47 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index b6b3a77da..653127a37 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -44,6 +44,11 @@
 		};
 	};
 
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop0_out>, <&vop1_out>;
+	};
+
 	sram: sram@10080000 {
 		compatible = "mmio-sram";
 		reg = <0x10080000 0x10000>;
@@ -57,6 +62,48 @@
 		};
 	};
 
+	vop0: vop@1010c000 {
+		compatible = "rockchip,rk3066-vop";
+		reg = <0x1010c000 0x19c>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC0>,
+			 <&cru DCLK_LCDC0>,
+			 <&cru HCLK_LCDC0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3066_PD_VIO>;
+		resets = <&cru SRST_LCDC0_AXI>,
+			 <&cru SRST_LCDC0_AHB>,
+			 <&cru SRST_LCDC0_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vop0_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	vop1: vop@1010e000 {
+		compatible = "rockchip,rk3066-vop";
+		reg = <0x1010e000 0x19c>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC1>,
+			 <&cru DCLK_LCDC1>,
+			 <&cru HCLK_LCDC1>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3066_PD_VIO>;
+		resets = <&cru SRST_LCDC1_AXI>,
+			 <&cru SRST_LCDC1_AHB>,
+			 <&cru SRST_LCDC1_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vop1_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	i2s0: i2s@10118000 {
 		compatible = "rockchip,rk3066-i2s";
 		reg = <0x10118000 0x2000>;
-- 
2.11.0


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v2 6/7] ARM: dts: rockchip: add rk3066 hdmi nodes
  2018-12-29 13:33 [PATCH v2 0/7] Enable rk3066 VOP and HDMI for MK808 Johan Jonker
                   ` (4 preceding siblings ...)
  2018-12-29 13:33 ` [PATCH v2 5/7] ARM: dts: rockchip: add rk3066 vop display nodes Johan Jonker
@ 2018-12-29 13:33 ` Johan Jonker
  2018-12-29 13:33 ` [PATCH v2 7/7] ARM: dts: rockchip: rk3066a-mk808: enable vop0 and " Johan Jonker
  6 siblings, 0 replies; 14+ messages in thread
From: Johan Jonker @ 2018-12-29 13:33 UTC (permalink / raw)
  To: heiko
  Cc: hjc, airlied, robh+dt, mark.rutland, mturquette, sboyd,
	dri-devel, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, linux-clk

From: Zheng Yang <zhengyang@rock-chips.com>

This patch adds the hdmi nodes to rk3066.

Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 arch/arm/boot/dts/rk3066a.dtsi | 44 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 653127a37..f95ce9881 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -80,6 +80,10 @@
 		vop0_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+			vop0_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop0>;
+			};
 		};
 	};
 
@@ -101,6 +105,36 @@
 		vop1_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+			vop1_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop1>;
+			};
+		};
+	};
+
+	hdmi: hdmi@10116000 {
+		compatible = "rockchip,rk3066-hdmi";
+		reg = <0x10116000 0x2000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HDMI>;
+		clock-names = "hclk";
+		power-domains = <&power RK3066_PD_VIO>;
+		rockchip,grf = <&grf>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
+		status = "disabled";
+
+		hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			hdmi_in_vop0: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vop0_out_hdmi>;
+			};
+			hdmi_in_vop1: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&vop1_out_hdmi>;
+			};
 		};
 	};
 
@@ -415,6 +449,16 @@
 			};
 		};
 
+		hdmi {
+			hdmi_hpd: hdmi-hpd {
+				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
+			};
+			hdmii2c_xfer: hdmii2c-xfer {
+				rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
+						<0 RK_PA2 1 &pcfg_pull_none>;
+			};
+		};
+
 		pwm0 {
 			pwm0_out: pwm0-out {
 				rockchip,pins = <RK_GPIO0 3 RK_FUNC_1 &pcfg_pull_none>;
-- 
2.11.0


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v2 7/7] ARM: dts: rockchip: rk3066a-mk808: enable vop0 and hdmi nodes
  2018-12-29 13:33 [PATCH v2 0/7] Enable rk3066 VOP and HDMI for MK808 Johan Jonker
                   ` (5 preceding siblings ...)
  2018-12-29 13:33 ` [PATCH v2 6/7] ARM: dts: rockchip: add rk3066 hdmi nodes Johan Jonker
@ 2018-12-29 13:33 ` " Johan Jonker
  6 siblings, 0 replies; 14+ messages in thread
From: Johan Jonker @ 2018-12-29 13:33 UTC (permalink / raw)
  To: heiko
  Cc: hjc, airlied, robh+dt, mark.rutland, mturquette, sboyd,
	dri-devel, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, linux-clk

This patch enables the vop0 and hdmi nodes
for a MK808 with rk3066 processor.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 arch/arm/boot/dts/rk3066a-mk808.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index b6a8a82d2..14a560598 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -91,6 +91,14 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in_vop1 {
+	status = "disabled";
+};
+
 &mmc0 {
 	bus-width = <4>;
 	cap-mmc-highspeed;
@@ -151,6 +159,10 @@
 	status = "okay";
 };
 
+&vop0 {
+	status = "okay";
+};
+
 &wdt {
 	status = "okay";
 };
-- 
2.11.0


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 1/7] ARM: dts: rockchip: rk3066: add HCLK_HDMI to pmu node
  2018-12-29 13:33 ` [PATCH v2 1/7] ARM: dts: rockchip: rk3066: add HCLK_HDMI to pmu node Johan Jonker
@ 2018-12-30 14:03   ` Heiko Stuebner
  0 siblings, 0 replies; 14+ messages in thread
From: Heiko Stuebner @ 2018-12-30 14:03 UTC (permalink / raw)
  To: Johan Jonker
  Cc: hjc, airlied, robh+dt, mark.rutland, mturquette, sboyd,
	dri-devel, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, linux-clk

Am Samstag, 29. Dezember 2018, 14:33:12 CET schrieb Johan Jonker:
> A MK808 TV stick with rk3066 processor
> boots normal with logo and console,
> but after booting the monitor remains black.
> This patch fixes a vblank wait time out
> by adding HCLK_HDMI to the pmu node.
> The HCLK_HDMI clock is now part of the logic
> that enables the RK3066_PD_VIO power domain.
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>

applied for 4.22

Thanks
Heiko



^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 2/7] clk: rockchip: rk3188: add CLK_SET_RATE_PARENT for lcdc dclk
  2018-12-29 13:33 ` [PATCH v2 2/7] clk: rockchip: rk3188: add CLK_SET_RATE_PARENT for lcdc dclk Johan Jonker
@ 2018-12-30 17:05   ` Heiko Stuebner
  0 siblings, 0 replies; 14+ messages in thread
From: Heiko Stuebner @ 2018-12-30 17:05 UTC (permalink / raw)
  To: Johan Jonker
  Cc: hjc, airlied, robh+dt, mark.rutland, mturquette, sboyd,
	dri-devel, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, linux-clk

Am Samstag, 29. Dezember 2018, 14:33:13 CET schrieb Johan Jonker:
> From: Finley Xiao <finley.xiao@rock-chips.com>
> 
> Add CLK_SET_RATE_PARENT for lcdc dclk.
> 
> Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>

applied for 4.22

Thanks
Heiko



^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 3/7] drm: rockchip: vop: add rk3066 vop definitions
  2018-12-29 13:33 ` [PATCH v2 3/7] drm: rockchip: vop: add rk3066 vop definitions Johan Jonker
@ 2018-12-30 17:22   ` Heiko Stuebner
  2019-01-11 14:54     ` Rob Herring
  0 siblings, 1 reply; 14+ messages in thread
From: Heiko Stuebner @ 2018-12-30 17:22 UTC (permalink / raw)
  To: Johan Jonker
  Cc: hjc, airlied, robh+dt, mark.rutland, mturquette, sboyd,
	dri-devel, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, linux-clk

Hi Johan,

Am Samstag, 29. Dezember 2018, 14:33:14 CET schrieb Johan Jonker:
> From: Mark Yao <mark.yao@rock-chips.com>
> 
> This patch adds the rk3066 VOP definitions.
> 
> The VOP or LCD Controller serves as interface between
> framebuffer memory and a display device (LCD panel or TV set).
> 
> This SOC has two symmetrical LCDC's for a dual panel application.
> 
> A LCDC has 5 display layers.
> Only 3 are used here.
> 
> - Video layer 0 (Win0)
> - Video layer 1 (Win1)
> - OSD layer     (Win2)

Patch itself looks good, we'll need to wait a bit to give Rob a chance
to look at the (simple) dt-binding change and I'll drop the paragraph
about the display layers when applying.

Looking at the rk3066-manual, the lcdcs really only have 3 fully usable
layers + the special cursor layer which is right now not really usable in
a drm context, so the above paragraph is misleading, so I'll just drop it.

Heiko


> Win0 and Win1 are exchangeable.
> Maximum resolution is 1920x1080.
> 
> The LCDC0 output is connected to:
> - LCDC0 IO (without IOMUX)
> - HDMI TX video input
> 
> The LCDC1 output is connected to:
> - LCDC1 IO (with IOMUX)
> - HDMI TX video input
> 
> The HDMI TX input can switch between LCDC0 and LCDC1.
> 
> Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>




^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 3/7] drm: rockchip: vop: add rk3066 vop definitions
  2018-12-30 17:22   ` Heiko Stuebner
@ 2019-01-11 14:54     ` Rob Herring
  2019-01-12 18:53       ` Heiko Stuebner
  0 siblings, 1 reply; 14+ messages in thread
From: Rob Herring @ 2019-01-11 14:54 UTC (permalink / raw)
  To: Heiko Stuebner
  Cc: Johan Jonker, hjc, airlied, mark.rutland, mturquette, sboyd,
	dri-devel, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, linux-clk

On Sun, Dec 30, 2018 at 06:22:00PM +0100, Heiko Stuebner wrote:
> Hi Johan,
> 
> Am Samstag, 29. Dezember 2018, 14:33:14 CET schrieb Johan Jonker:
> > From: Mark Yao <mark.yao@rock-chips.com>
> > 
> > This patch adds the rk3066 VOP definitions.
> > 
> > The VOP or LCD Controller serves as interface between
> > framebuffer memory and a display device (LCD panel or TV set).
> > 
> > This SOC has two symmetrical LCDC's for a dual panel application.
> > 
> > A LCDC has 5 display layers.
> > Only 3 are used here.
> > 
> > - Video layer 0 (Win0)
> > - Video layer 1 (Win1)
> > - OSD layer     (Win2)
> 
> Patch itself looks good, we'll need to wait a bit to give Rob a chance
> to look at the (simple) dt-binding change and I'll drop the paragraph
> about the display layers when applying.

Don't wait on me for simple oneline compatible additions.

Acked-by: Rob Herring <robh@kernel.org>

Rob

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 3/7] drm: rockchip: vop: add rk3066 vop definitions
  2019-01-11 14:54     ` Rob Herring
@ 2019-01-12 18:53       ` Heiko Stuebner
  0 siblings, 0 replies; 14+ messages in thread
From: Heiko Stuebner @ 2019-01-12 18:53 UTC (permalink / raw)
  To: Rob Herring
  Cc: Johan Jonker, hjc, airlied, mark.rutland, mturquette, sboyd,
	dri-devel, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, linux-clk

Am Freitag, 11. Januar 2019, 15:54:24 CET schrieb Rob Herring:
> On Sun, Dec 30, 2018 at 06:22:00PM +0100, Heiko Stuebner wrote:
> > Hi Johan,
> > 
> > Am Samstag, 29. Dezember 2018, 14:33:14 CET schrieb Johan Jonker:
> > > From: Mark Yao <mark.yao@rock-chips.com>
> > > 
> > > This patch adds the rk3066 VOP definitions.
> > > 
> > > The VOP or LCD Controller serves as interface between
> > > framebuffer memory and a display device (LCD panel or TV set).
> > > 
> > > This SOC has two symmetrical LCDC's for a dual panel application.
> > > 
> > > A LCDC has 5 display layers.
> > > Only 3 are used here.
> > > 
> > > - Video layer 0 (Win0)
> > > - Video layer 1 (Win1)
> > > - OSD layer     (Win2)
> > 
> > Patch itself looks good, we'll need to wait a bit to give Rob a chance
> > to look at the (simple) dt-binding change and I'll drop the paragraph
> > about the display layers when applying.
> 
> Don't wait on me for simple oneline compatible additions.

This more or less was the fault of the year change :-D ... most of
the time I'd apply a simple new compatible earlier and possibly
without Ack ;-) .

And I've applied the patch to drm-misc-next now (for 5.1).

Heiko



^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v2 5/7] ARM: dts: rockchip: add rk3066 vop display nodes
  2018-12-29 13:33 ` [PATCH v2 5/7] ARM: dts: rockchip: add rk3066 vop display nodes Johan Jonker
@ 2019-01-12 19:24   ` Heiko Stuebner
  0 siblings, 0 replies; 14+ messages in thread
From: Heiko Stuebner @ 2019-01-12 19:24 UTC (permalink / raw)
  To: Johan Jonker
  Cc: hjc, airlied, robh+dt, mark.rutland, mturquette, sboyd,
	dri-devel, devicetree, linux-arm-kernel, linux-rockchip,
	linux-kernel, linux-clk

Am Samstag, 29. Dezember 2018, 14:33:16 CET schrieb Johan Jonker:
> From: Mark Yao <mark.yao@rock-chips.com>
> 
> This patch adds the core display subsystem and vop nodes to rk3066.
> 
> Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>

applied for 5.1

Thanks
Heiko



^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, back to index

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-29 13:33 [PATCH v2 0/7] Enable rk3066 VOP and HDMI for MK808 Johan Jonker
2018-12-29 13:33 ` [PATCH v2 1/7] ARM: dts: rockchip: rk3066: add HCLK_HDMI to pmu node Johan Jonker
2018-12-30 14:03   ` Heiko Stuebner
2018-12-29 13:33 ` [PATCH v2 2/7] clk: rockchip: rk3188: add CLK_SET_RATE_PARENT for lcdc dclk Johan Jonker
2018-12-30 17:05   ` Heiko Stuebner
2018-12-29 13:33 ` [PATCH v2 3/7] drm: rockchip: vop: add rk3066 vop definitions Johan Jonker
2018-12-30 17:22   ` Heiko Stuebner
2019-01-11 14:54     ` Rob Herring
2019-01-12 18:53       ` Heiko Stuebner
2018-12-29 13:33 ` [PATCH v2 4/7] drm: rockchip: introduce rk3066 hdmi Johan Jonker
2018-12-29 13:33 ` [PATCH v2 5/7] ARM: dts: rockchip: add rk3066 vop display nodes Johan Jonker
2019-01-12 19:24   ` Heiko Stuebner
2018-12-29 13:33 ` [PATCH v2 6/7] ARM: dts: rockchip: add rk3066 hdmi nodes Johan Jonker
2018-12-29 13:33 ` [PATCH v2 7/7] ARM: dts: rockchip: rk3066a-mk808: enable vop0 and " Johan Jonker

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org linux-clk@archiver.kernel.org
	public-inbox-index linux-clk


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/ public-inbox