Linux-Clk Archive on lore.kernel.org
 help / Atom feed
From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: hjc@rock-chips.com, airlied@linux.ie, robh+dt@kernel.org,
	mark.rutland@arm.com, mturquette@baylibre.com, sboyd@kernel.org,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org
Subject: [PATCH v2 5/7] ARM: dts: rockchip: add rk3066 vop display nodes
Date: Sat, 29 Dec 2018 14:33:16 +0100
Message-ID: <20181229133318.18128-6-jbx6244@gmail.com> (raw)
In-Reply-To: <20181229133318.18128-1-jbx6244@gmail.com>

From: Mark Yao <mark.yao@rock-chips.com>

This patch adds the core display subsystem and vop nodes to rk3066.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 arch/arm/boot/dts/rk3066a.dtsi | 47 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index b6b3a77da..653127a37 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -44,6 +44,11 @@
 		};
 	};
 
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop0_out>, <&vop1_out>;
+	};
+
 	sram: sram@10080000 {
 		compatible = "mmio-sram";
 		reg = <0x10080000 0x10000>;
@@ -57,6 +62,48 @@
 		};
 	};
 
+	vop0: vop@1010c000 {
+		compatible = "rockchip,rk3066-vop";
+		reg = <0x1010c000 0x19c>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC0>,
+			 <&cru DCLK_LCDC0>,
+			 <&cru HCLK_LCDC0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3066_PD_VIO>;
+		resets = <&cru SRST_LCDC0_AXI>,
+			 <&cru SRST_LCDC0_AHB>,
+			 <&cru SRST_LCDC0_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vop0_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	vop1: vop@1010e000 {
+		compatible = "rockchip,rk3066-vop";
+		reg = <0x1010e000 0x19c>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC1>,
+			 <&cru DCLK_LCDC1>,
+			 <&cru HCLK_LCDC1>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3066_PD_VIO>;
+		resets = <&cru SRST_LCDC1_AXI>,
+			 <&cru SRST_LCDC1_AHB>,
+			 <&cru SRST_LCDC1_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vop1_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	i2s0: i2s@10118000 {
 		compatible = "rockchip,rk3066-i2s";
 		reg = <0x10118000 0x2000>;
-- 
2.11.0


  parent reply index

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-29 13:33 [PATCH v2 0/7] Enable rk3066 VOP and HDMI for MK808 Johan Jonker
2018-12-29 13:33 ` [PATCH v2 1/7] ARM: dts: rockchip: rk3066: add HCLK_HDMI to pmu node Johan Jonker
2018-12-30 14:03   ` Heiko Stuebner
2018-12-29 13:33 ` [PATCH v2 2/7] clk: rockchip: rk3188: add CLK_SET_RATE_PARENT for lcdc dclk Johan Jonker
2018-12-30 17:05   ` Heiko Stuebner
2018-12-29 13:33 ` [PATCH v2 3/7] drm: rockchip: vop: add rk3066 vop definitions Johan Jonker
2018-12-30 17:22   ` Heiko Stuebner
2019-01-11 14:54     ` Rob Herring
2019-01-12 18:53       ` Heiko Stuebner
2018-12-29 13:33 ` [PATCH v2 4/7] drm: rockchip: introduce rk3066 hdmi Johan Jonker
2019-02-01 14:25   ` Johan Jonker
2018-12-29 13:33 ` Johan Jonker [this message]
2019-01-12 19:24   ` [PATCH v2 5/7] ARM: dts: rockchip: add rk3066 vop display nodes Heiko Stuebner
2018-12-29 13:33 ` [PATCH v2 6/7] ARM: dts: rockchip: add rk3066 hdmi nodes Johan Jonker
2018-12-29 13:33 ` [PATCH v2 7/7] ARM: dts: rockchip: rk3066a-mk808: enable vop0 and " Johan Jonker
2019-02-01 12:32 ` [PATCH] dt-bindings: display: rockchip: add document for rk3066 hdmi Johan Jonker
2019-02-25 16:59   ` Rob Herring
2019-02-27 18:04     ` Johan Jonker
2019-02-27 19:06       ` Rob Herring

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181229133318.18128-6-jbx6244@gmail.com \
    --to=jbx6244@gmail.com \
    --cc=airlied@linux.ie \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=heiko@sntech.de \
    --cc=hjc@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org linux-clk@archiver.kernel.org
	public-inbox-index linux-clk


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/ public-inbox