From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: sboyd@kernel.org, mturquette@baylibre.com, afaerber@suse.de,
robh+dt@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-actions@lists.infradead.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Edgar Bernardi Righi <edgar.righi@lsitec.org.br>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH 2/6] dt-bindings: clock: Add DT bindings for Actions Semi S500 CMU
Date: Tue, 1 Jan 2019 00:25:13 +0530 [thread overview]
Message-ID: <20181231185517.18517-3-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20181231185517.18517-1-manivannan.sadhasivam@linaro.org>
From: Edgar Bernardi Righi <edgar.righi@lsitec.org.br>
Add devicetree bindings for Actions Semi S500 Clock Management Unit.
Signed-off-by: Edgar Bernardi Righi <edgar.righi@lsitec.org.br>
[Mani: Documented S500 CMU compatible]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
Rob, I have removed your Reviewed-by tag for this patch since the
earlier revision contained only bindings constants and lacked the
compatible documentation, which is added now.
.../bindings/clock/actions,owl-cmu.txt | 7 +-
include/dt-bindings/clock/actions,s500-cmu.h | 78 +++++++++++++++++++
2 files changed, 82 insertions(+), 3 deletions(-)
create mode 100644 include/dt-bindings/clock/actions,s500-cmu.h
diff --git a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
index 2ef86ae96df8..86183f559022 100644
--- a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
+++ b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
@@ -2,13 +2,14 @@
The Actions Semi Owl Clock Management Unit generates and supplies clock
to various controllers within the SoC. The clock binding described here is
-applicable to S900 and S700 SoC's.
+applicable to S900,S700 and S500 SoC's.
Required Properties:
- compatible: should be one of the following,
"actions,s900-cmu"
"actions,s700-cmu"
+ "actions,s500-cmu"
- reg: physical base address of the controller and length of memory mapped
region.
- clocks: Reference to the parent clocks ("hosc", "losc")
@@ -19,8 +20,8 @@ Each clock is assigned an identifier, and client nodes can use this identifier
to specify the clock which they consume.
All available clocks are defined as preprocessor macros in corresponding
-dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h header and can be
-used in device tree sources.
+dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h or
+actions,s500-cmu.h header and can be used in device tree sources.
External clocks:
diff --git a/include/dt-bindings/clock/actions,s500-cmu.h b/include/dt-bindings/clock/actions,s500-cmu.h
new file mode 100644
index 000000000000..dc3fd2b0299d
--- /dev/null
+++ b/include/dt-bindings/clock/actions,s500-cmu.h
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree binding constants for Actions Semi S500 Clock Management Unit
+ *
+ * Copyright (c) 2014 Actions Semi Inc.
+ * Copyright (c) 2018 LSI-TEC - Caninos Loucos
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_S500_CMU_H
+#define __DT_BINDINGS_CLOCK_S500_CMU_H
+
+#define CLK_NONE 0
+
+/* fixed rate clocks */
+#define CLK_LOSC 1
+#define CLK_HOSC 2
+
+/* pll clocks */
+#define CLK_CORE_PLL 3
+#define CLK_DEV_PLL 4
+#define CLK_DDR_PLL 5
+#define CLK_NAND_PLL 6
+#define CLK_DISPLAY_PLL 7
+#define CLK_ETHERNET_PLL 8
+#define CLK_AUDIO_PLL 9
+
+/* system clock */
+#define CLK_DEV 10
+#define CLK_H 11
+#define CLK_AHBPREDIV 12
+#define CLK_AHB 13
+#define CLK_DE 14
+#define CLK_BISP 15
+#define CLK_VCE 16
+#define CLK_VDE 17
+
+/* peripheral device clock */
+#define CLK_TIMER 18
+#define CLK_I2C0 19
+#define CLK_I2C1 20
+#define CLK_I2C2 21
+#define CLK_I2C3 22
+#define CLK_PWM0 23
+#define CLK_PWM1 24
+#define CLK_PWM2 25
+#define CLK_PWM3 26
+#define CLK_PWM4 27
+#define CLK_PWM5 28
+#define CLK_SD0 29
+#define CLK_SD1 30
+#define CLK_SD2 31
+#define CLK_SENSOR0 32
+#define CLK_SENSOR1 33
+#define CLK_SPI0 34
+#define CLK_SPI1 35
+#define CLK_SPI2 36
+#define CLK_SPI3 37
+#define CLK_UART0 38
+#define CLK_UART1 39
+#define CLK_UART2 40
+#define CLK_UART3 41
+#define CLK_UART4 42
+#define CLK_UART5 43
+#define CLK_UART6 44
+#define CLK_DE1 45
+#define CLK_DE2 46
+#define CLK_I2SRX 47
+#define CLK_I2STX 48
+#define CLK_HDMI_AUDIO 49
+#define CLK_HDMI 50
+#define CLK_SPDIF 51
+#define CLK_NAND 52
+#define CLK_ECC 53
+#define CLK_RMII_REF 54
+
+#define CLK_NR_CLKS (CLK_RMII_REF + 1)
+
+#endif /* __DT_BINDINGS_CLOCK_S500_CMU_H */
--
2.17.1
next prev parent reply other threads:[~2018-12-31 18:55 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-31 18:55 [PATCH 0/6] Add clock support for Actions Semi S500 SoC Manivannan Sadhasivam
2018-12-31 18:55 ` [PATCH 1/6] clk: actions: Add configurable PLL delay Manivannan Sadhasivam
2019-01-11 23:57 ` Stephen Boyd
2018-12-31 18:55 ` Manivannan Sadhasivam [this message]
2019-01-11 14:56 ` [PATCH 2/6] dt-bindings: clock: Add DT bindings for Actions Semi S500 CMU Rob Herring
2018-12-31 18:55 ` [PATCH 3/6] ARM: dts: Add CMU support for Actions Semi Owl S500 SoC Manivannan Sadhasivam
2018-12-31 18:55 ` [PATCH 4/6] ARM: dts: Remove fake UART clock for S500 based SBCs Manivannan Sadhasivam
2018-12-31 18:55 ` [PATCH 5/6] clk: actions: Add clock driver for S500 SoC Manivannan Sadhasivam
2019-01-11 23:56 ` Stephen Boyd
2019-01-15 3:15 ` Manivannan Sadhasivam
2018-12-31 18:55 ` [PATCH 6/6] MAINTAINERS: Add linux-actions mailing list for Actions Semi Manivannan Sadhasivam
2018-12-31 19:12 ` Joe Perches
2019-01-01 3:26 ` Manivannan Sadhasivam
2019-01-01 3:32 ` Andreas Färber
2019-01-01 7:37 ` Manivannan Sadhasivam
2019-01-01 16:56 ` Joe Perches
2019-01-02 2:18 ` Manivannan Sadhasivam
2019-01-11 22:51 ` [PATCH 0/6] Add clock support for Actions Semi S500 SoC Stephen Boyd
2019-01-14 9:18 ` Manivannan Sadhasivam
2019-01-14 21:55 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181231185517.18517-3-manivannan.sadhasivam@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=afaerber@suse.de \
--cc=devicetree@vger.kernel.org \
--cc=edgar.righi@lsitec.org.br \
--cc=linux-actions@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).