Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Joseph Lo <josephl@nvidia.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	Peter De Schrijver <pdeschrijver@nvidia.com>,
	Jonathan Hunter <jonathanh@nvidia.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<linux-tegra@vger.kernel.org>, <linux-clk@vger.kernel.org>,
	Joseph Lo <josephl@nvidia.com>, Stephen Boyd <sboyd@kernel.org>
Subject: [PATCH V4 08/20] clk: tegra: dfll: round down voltages based on alignment
Date: Fri, 4 Jan 2019 11:06:50 +0800
Message-ID: <20190104030702.8684-9-josephl@nvidia.com> (raw)
In-Reply-To: <20190104030702.8684-1-josephl@nvidia.com>

When generating the OPP table, the voltages are round down with the
alignment from the regulator. The alignment should be applied for
voltages look up as well.

Based on the work of Penny Chiu <pchiu@nvidia.com>.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
---
*V4:
 - add ack tags
*V3:
 - fix error handling code when regulator_list_voltage returns error
*V2:
 - s/align_volt/align_step/
 - s/reg_volt/reg_volt_id/
---
 drivers/clk/tegra/clk-dfll.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c
index 69bbf62a9eab..0400e5b1d627 100644
--- a/drivers/clk/tegra/clk-dfll.c
+++ b/drivers/clk/tegra/clk-dfll.c
@@ -804,18 +804,17 @@ static void dfll_init_out_if(struct tegra_dfll *td)
 static int find_lut_index_for_rate(struct tegra_dfll *td, unsigned long rate)
 {
 	struct dev_pm_opp *opp;
-	unsigned long uv;
-	int i;
+	int i, align_step;
 
 	opp = dev_pm_opp_find_freq_ceil(td->soc->dev, &rate);
 	if (IS_ERR(opp))
 		return PTR_ERR(opp);
 
-	uv = dev_pm_opp_get_voltage(opp);
+	align_step = dev_pm_opp_get_voltage(opp) / td->soc->alignment.step_uv;
 	dev_pm_opp_put(opp);
 
 	for (i = td->lut_bottom; i < td->lut_size; i++) {
-		if (td->lut_uv[i] >= uv)
+		if ((td->lut_uv[i] / td->soc->alignment.step_uv) >= align_step)
 			return i;
 	}
 
@@ -1533,18 +1532,21 @@ static int dfll_init(struct tegra_dfll *td)
  */
 static int find_vdd_map_entry_exact(struct tegra_dfll *td, int uV)
 {
-	int i, n_voltages, reg_uV;
+	int i, n_voltages, reg_uV,reg_volt_id, align_step;
 
 	if (WARN_ON(td->pmu_if == TEGRA_DFLL_PMU_PWM))
 		return -EINVAL;
 
+	align_step = uV / td->soc->alignment.step_uv;
 	n_voltages = regulator_count_voltages(td->vdd_reg);
 	for (i = 0; i < n_voltages; i++) {
 		reg_uV = regulator_list_voltage(td->vdd_reg, i);
 		if (reg_uV < 0)
 			break;
 
-		if (uV == reg_uV)
+		reg_volt_id = reg_uV / td->soc->alignment.step_uv;
+
+		if (align_step == reg_volt_id)
 			return i;
 	}
 
@@ -1558,18 +1560,21 @@ static int find_vdd_map_entry_exact(struct tegra_dfll *td, int uV)
  * */
 static int find_vdd_map_entry_min(struct tegra_dfll *td, int uV)
 {
-	int i, n_voltages, reg_uV;
+	int i, n_voltages, reg_uV, reg_volt_id, align_step;
 
 	if (WARN_ON(td->pmu_if == TEGRA_DFLL_PMU_PWM))
 		return -EINVAL;
 
+	align_step = uV / td->soc->alignment.step_uv;
 	n_voltages = regulator_count_voltages(td->vdd_reg);
 	for (i = 0; i < n_voltages; i++) {
 		reg_uV = regulator_list_voltage(td->vdd_reg, i);
 		if (reg_uV < 0)
 			break;
 
-		if (uV <= reg_uV)
+		reg_volt_id = reg_uV / td->soc->alignment.step_uv;
+
+		if (align_step <= reg_volt_id)
 			return i;
 	}
 
-- 
2.20.1


  parent reply index

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-04  3:06 [PATCH V4 00/20] Tegra210 DFLL support Joseph Lo
2019-01-04  3:06 ` [PATCH V4 01/20] dt-bindings: clock: tegra124-dfll: Update DFLL binding for PWM regulator Joseph Lo
2019-01-08  0:35   ` Joseph Lo
2019-01-11  8:14     ` Joseph Lo
2019-01-11 19:32   ` Rob Herring
2019-01-04  3:06 ` [PATCH V4 02/20] dt-bindings: clock: tegra124-dfll: add Tegra210 support Joseph Lo
2019-01-04  3:06 ` [PATCH V4 03/20] dt-bindings: cpufreq: tegra124: remove vdd-cpu-supply from required properties Joseph Lo
2019-01-04  3:06 ` [PATCH V4 04/20] dt-bindings: cpufreq: tegra124: remove cpu_lp clock " Joseph Lo
2019-01-04  3:06 ` [PATCH V4 05/20] clk: tegra: dfll: registration for multiple SoCs Joseph Lo
2019-01-04  3:06 ` [PATCH V4 06/20] clk: tegra: dfll: CVB calculation alignment with the regulator Joseph Lo
2019-01-04  3:06 ` [PATCH V4 07/20] clk: tegra: dfll: support PWM regulator control Joseph Lo
2019-01-04  3:06 ` Joseph Lo [this message]
2019-01-04  3:06 ` [PATCH V4 09/20] clk: tegra: dfll: add CVB tables for Tegra210 Joseph Lo
2019-01-04  3:06 ` [PATCH V4 10/20] clk: tegra: dfll: build clk-dfll.c for Tegra124 and Tegra210 Joseph Lo
2019-01-08  0:33   ` Joseph Lo
2019-01-09 18:39   ` Stephen Boyd
2019-01-04  3:06 ` [PATCH V4 11/20] cpufreq: tegra124: do not handle the CPU rail Joseph Lo
2019-01-04  3:06 ` [PATCH V4 12/20] cpufreq: tegra124: extend to support Tegra210 Joseph Lo
2019-01-04  3:06 ` [PATCH V4 13/20] cpufreq: dt-platdev: add Tegra210 to blacklist Joseph Lo
2019-01-04  3:06 ` [PATCH V4 14/20] arm64: dts: tegra210: add DFLL clock Joseph Lo
2019-01-04  3:06 ` [PATCH V4 15/20] arm64: dts: tegra210: add CPU clocks Joseph Lo
2019-01-04  3:06 ` [PATCH V4 16/20] arm64: dts: tegra210-p2597: add pinmux for PWM-based DFLL support Joseph Lo
2019-01-04  3:06 ` [PATCH V4 17/20] arm64: dts: tegra210-p2371-2180: enable DFLL clock Joseph Lo
2019-01-04  3:07 ` [PATCH V4 18/20] arm64: dts: tegra210-smaug: add CPU power rail regulator Joseph Lo
2019-01-04  3:07 ` [PATCH V4 19/20] arm64: dts: tegra210-smaug: enable DFLL clock Joseph Lo
2019-01-04  3:07 ` [PATCH V4 20/20] arm64: defconfig: Enable MAX8973 regulator Joseph Lo
2019-01-25 13:46 ` [PATCH V4 00/20] Tegra210 DFLL support Thierry Reding
2019-01-28  1:43   ` Joseph Lo
2019-01-28  7:54     ` Thierry Reding
2019-02-01  2:49       ` Joseph Lo
2019-02-05 22:27         ` Stephen Boyd

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190104030702.8684-9-josephl@nvidia.com \
    --to=josephl@nvidia.com \
    --cc=jonathanh@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=pdeschrijver@nvidia.com \
    --cc=sboyd@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org linux-clk@archiver.kernel.org
	public-inbox-index linux-clk


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/ public-inbox