From: Jagan Teki <jagan@amarulasolutions.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Chen-Yu Tsai <wens@csie.org>,
Michael Turquette <mturquette@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
Michael Trimarchi <michael@amarulasolutions.com>,
linux-amarula@amarulasolutions.com, linux-sunxi@googlegroups.com,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI
Date: Fri, 25 Jan 2019 01:28:49 +0530 [thread overview]
Message-ID: <20190124195900.22620-12-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190124195900.22620-1-jagan@amarulasolutions.com>
Minimum PLL used for MIPI is 500MHz, as per manual, but
lowering the min rate by 300MHz can result proper working
nkms divider with the help of desired dclock rate from
panel driver.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
---
drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 932836d26e2b..296d489aad6e 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -183,6 +183,7 @@ static struct ccu_nkm pll_mipi_clk = {
.n = _SUNXI_CCU_MULT(8, 4),
.k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
.m = _SUNXI_CCU_DIV(0, 4),
+ .min_rate = 300000000,
.common = {
.reg = 0x040,
.hw.init = CLK_HW_INIT("pll-mipi", "pll-video0",
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-01-24 20:01 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-24 19:58 [PATCH v6 00/22] drm/sun4i: Allwinner A64 MIPI-DSI support Jagan Teki
2019-01-24 19:58 ` [PATCH v6 01/22] drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction delay Jagan Teki
2019-01-24 19:58 ` [PATCH v6 02/22] drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection Jagan Teki
2019-01-24 19:58 ` [PATCH v6 03/22] drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings Jagan Teki
2019-01-24 19:58 ` [PATCH v6 04/22] drm/sun4i: sun6i_mipi_dsi: Simplify drq to support all modes Jagan Teki
2019-01-24 19:58 ` [PATCH v6 05/22] drm/sun4i: tcon: Export get tcon0 routine Jagan Teki
2019-01-24 19:58 ` [PATCH v6 06/22] drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind Jagan Teki
2019-01-24 19:58 ` [PATCH v6 07/22] drm/sun4i: sun6i_mipi_dsi: Setup burst mode Jagan Teki
2019-01-24 19:58 ` [PATCH v6 08/22] drm/sun4i: sun6i_mipi_dsi: Enable 2byte trail for 4-lane " Jagan Teki
2019-01-24 19:58 ` [PATCH v6 09/22] drm/sun4i: sun6i_mipi_dsi: Enable burst mode HBP, HSA_HSE Jagan Teki
2019-01-24 19:58 ` [PATCH v6 10/22] clk: sunxi-ng: Add check for minimal rate to NKM PLLs Jagan Teki
2019-01-24 19:58 ` Jagan Teki [this message]
2019-01-25 21:24 ` [PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI Maxime Ripard
2019-01-28 9:36 ` Jagan Teki
2019-01-29 15:13 ` Maxime Ripard
2019-01-29 17:31 ` Jagan Teki
2019-02-01 14:31 ` Maxime Ripard
2019-02-01 16:33 ` Jagan Teki
2019-02-11 14:07 ` Jagan Teki
2019-02-12 9:30 ` Maxime Ripard
2019-02-12 9:38 ` Jagan Teki
2019-05-24 10:07 ` Jagan Teki
2019-06-05 6:49 ` Maxime Ripard
2019-06-05 7:33 ` Jagan Teki
2019-06-14 14:24 ` Maxime Ripard
2019-06-20 18:27 ` Jagan Teki
2019-06-25 14:49 ` Maxime Ripard
2019-06-25 15:30 ` Jagan Teki
2019-07-03 11:49 ` Maxime Ripard
2019-07-05 17:52 ` Michael Nazzareno Trimarchi
2019-07-11 10:01 ` Maxime Ripard
2019-07-11 17:43 ` Michael Nazzareno Trimarchi
2019-07-11 19:34 ` Michael Nazzareno Trimarchi
2019-07-20 6:58 ` Maxime Ripard
2019-07-20 7:16 ` Jagan Teki
2019-07-20 7:34 ` Jagan Teki
2019-07-20 9:32 ` Maxime Ripard
2019-07-20 9:42 ` Michael Nazzareno Trimarchi
2019-07-22 10:21 ` Jagan Teki
2019-07-22 10:25 ` Michael Nazzareno Trimarchi
2019-07-22 10:38 ` Jagan Teki
2019-07-24 9:05 ` Maxime Ripard
2019-07-29 6:59 ` Michael Nazzareno Trimarchi
2019-08-02 8:38 ` Michael Nazzareno Trimarchi
2019-08-13 6:05 ` Maxime Ripard
2019-08-15 12:25 ` Michael Nazzareno Trimarchi
2019-08-28 13:03 ` Maxime Ripard
2019-08-28 13:09 ` Michael Nazzareno Trimarchi
2019-01-24 19:58 ` [PATCH v6 12/22] dt-bindings: sun6i-dsi: Add VCC-DSI supply property Jagan Teki
2019-01-25 15:47 ` Maxime Ripard
2019-01-24 19:58 ` [PATCH v6 13/22] drm/sun4i: sun6i_mipi_dsi: Add support for VCC-DSI voltage regulator Jagan Teki
2019-01-24 19:58 ` [PATCH v6 14/22] dt-bindings: sun6i-dsi: Add A64 DSI compatible (w/ A31 fallback) Jagan Teki
2019-01-25 15:52 ` Maxime Ripard
2019-01-26 16:09 ` [linux-sunxi] " Jagan Teki
2019-01-29 14:54 ` Maxime Ripard
2019-01-24 19:58 ` [PATCH v6 15/22] dt-bindings: sun6i-dsi: Add A64 DPHY " Jagan Teki
2019-01-25 15:52 ` Maxime Ripard
2019-01-24 19:58 ` [PATCH v6 16/22] arm64: dts: allwinner: a64: Add DSI pipeline Jagan Teki
2019-01-25 18:51 ` Maxime Ripard
2019-01-24 19:58 ` [DO NOT MERGE] [PATCH v6 17/22] arm64: allwinner: a64: pine64-lts: Enable Feiyang FY07024DI26A30-D DSI panel Jagan Teki
2019-01-24 19:58 ` [PATCH v6 18/22] drm/sun4i: sun6i_mipi_dsi: Add DSI Generic short write 2 param transfer Jagan Teki
2019-01-24 19:58 ` [DO NOT MERGE] [PATCH v6 19/22] arm64: dts: allwinner: bananapi-m64: Bananapi S070WV20-CT16 DSI panel Jagan Teki
2019-01-24 19:58 ` [PATCH v6 20/22] drm/sun4i: sun6i_mipi_dsi: Fix DSI hbp timing value Jagan Teki
2019-01-24 19:58 ` [PATCH v6 21/22] drm/sun4i: sun6i_mipi_dsi: Fix DSI hfp " Jagan Teki
2019-01-24 19:59 ` [PATCH v6 22/22] arm64: dts: allwinner: a64-amarula-relic: Add Techstar TS8550B MIPI-DSI panel Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190124195900.22620-12-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=michael@amarulasolutions.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).