Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Govind Singh <govinds@codeaurora.org>
To: bjorn.andersson@linaro.org, linux-remoteproc@vger.kernel.org,
	sboyd@kernel.org
Cc: linux-clk@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	andy.gross@linaro.org, david.brown@linaro.org,
	linux-soc@vger.kernel.org, devicetree@vger.kernel.org,
	Govind Singh <govinds@codeaurora.org>
Subject: [PATCH v4 5/8] remoteproc: qcom: wcss: populate hardcoded param using driver data
Date: Sat,  2 Feb 2019 20:56:23 +0530
Message-ID: <20190202152626.1006-6-govinds@codeaurora.org> (raw)
In-Reply-To: <20190202152626.1006-1-govinds@codeaurora.org>

Q6 based WiFi fw loading is supported across
different targets, ex: IPQ8074/QCS404. In order to
support different fw names/pas id etc, populate
hardcoded param using driver data.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_wcss.c | 35 ++++++++++++++++++++++++-----
 1 file changed, 29 insertions(+), 6 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index f93e1e4a1cc0..f18b55227805 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -8,6 +8,7 @@
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/of_reserved_mem.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -16,7 +17,6 @@
 #include "qcom_common.h"
 #include "qcom_q6v5.h"
 
-#define WCSS_CRASH_REASON		421
 
 /* Q6SS Register Offsets */
 #define Q6SS_RESET_REG		0x014
@@ -70,6 +70,12 @@
 #define TCSR_WCSS_CLK_MASK	0x1F
 #define TCSR_WCSS_CLK_ENABLE	0x14
 
+struct wcss_data {
+	const char *firmware_name;
+	int crash_reason_smem;
+	u8 version;
+};
+
 struct q6v5_wcss {
 	struct device *dev;
 
@@ -91,6 +97,9 @@ struct q6v5_wcss {
 	phys_addr_t mem_reloc;
 	void *mem_region;
 	size_t mem_size;
+
+	int crash_reason_smem;
+	u8 version;
 };
 
 static int q6v5_wcss_reset(struct q6v5_wcss *wcss)
@@ -427,7 +436,7 @@ static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw)
 				     wcss->mem_size, &wcss->mem_reloc);
 }
 
-static const struct rproc_ops q6v5_wcss_ops = {
+static const struct rproc_ops q6v5_wcss_ipq8074_ops = {
 	.start = q6v5_wcss_start,
 	.stop = q6v5_wcss_stop,
 	.da_to_va = q6v5_wcss_da_to_va,
@@ -527,12 +536,17 @@ static int q6v5_alloc_memory_region(struct q6v5_wcss *wcss)
 
 static int q6v5_wcss_probe(struct platform_device *pdev)
 {
+	const struct wcss_data *desc;
 	struct q6v5_wcss *wcss;
 	struct rproc *rproc;
 	int ret;
 
-	rproc = rproc_alloc(&pdev->dev, pdev->name, &q6v5_wcss_ops,
-			    "IPQ8074/q6_fw.mdt", sizeof(*wcss));
+	desc = of_device_get_match_data(&pdev->dev);
+	if (!desc)
+		return -EINVAL;
+
+	rproc = rproc_alloc(&pdev->dev, pdev->name, &q6v5_wcss_ipq8074_ops,
+			    desc->firmware_name, sizeof(*wcss));
 	if (!rproc) {
 		dev_err(&pdev->dev, "failed to allocate rproc\n");
 		return -ENOMEM;
@@ -540,6 +554,8 @@ static int q6v5_wcss_probe(struct platform_device *pdev)
 
 	wcss = rproc->priv;
 	wcss->dev = &pdev->dev;
+	wcss->version = desc->version;
+	wcss->crash_reason_smem = desc->crash_reason_smem;
 
 	ret = q6v5_wcss_init_mmio(wcss, pdev);
 	if (ret)
@@ -553,7 +569,8 @@ static int q6v5_wcss_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_rproc;
 
-	ret = qcom_q6v5_init(&wcss->q6v5, pdev, rproc, WCSS_CRASH_REASON, NULL);
+	ret = qcom_q6v5_init(&wcss->q6v5, pdev, rproc, desc->crash_reason_smem,
+			     NULL);
 	if (ret)
 		goto free_rproc;
 
@@ -581,8 +598,14 @@ static int q6v5_wcss_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct wcss_data wcss_ipq8074_res_init = {
+	.firmware_name = "IPQ8074/q6_fw.mdt",
+	.crash_reason_smem = 421,
+};
+
 static const struct of_device_id q6v5_wcss_of_match[] = {
-	{ .compatible = "qcom,ipq8074-wcss-pil" },
+	{ .compatible = "qcom,ipq8074-wcss-pil", .data = &wcss_ipq8074_res_init },
+
 	{ },
 };
 MODULE_DEVICE_TABLE(of, q6v5_wcss_of_match);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-02 15:26 [PATCH v4 0/8] Add non PAS wcss Q6 support for QCS404 Govind Singh
2019-02-02 15:26 ` [PATCH v4 1/8] dt-bindings: clock: qcom: Add QCOM WCSS GCC clock bindings Govind Singh
2019-02-19  6:45   ` Bjorn Andersson
2019-02-02 15:26 ` [PATCH v4 2/8] clk: qcom: Add WCSS gcc clock control for QCS404 Govind Singh
2019-02-05 21:49   ` Stephen Boyd
2019-02-02 15:26 ` [PATCH v4 3/8] dt-bindings: clock: qcom: Introduce QCOM WCSS Q6DSP clock bindings Govind Singh
2019-02-19  6:47   ` Bjorn Andersson
2019-02-02 15:26 ` [PATCH v4 4/8] clk: qcom: Add WCSS Q6DSP clock controller for QCS404 Govind Singh
2019-02-05 21:53   ` Stephen Boyd
2019-02-19  6:58   ` Bjorn Andersson
2019-02-02 15:26 ` Govind Singh [this message]
2019-02-19  7:02   ` [PATCH v4 5/8] remoteproc: qcom: wcss: populate hardcoded param using driver data Bjorn Andersson
2019-02-02 15:26 ` [PATCH v4 6/8] dt-binding: remoteproc: Add QTI WCSS PIL bindings Govind Singh
2019-02-19  7:10   ` Bjorn Andersson
2019-02-02 15:26 ` [PATCH v4 7/8] remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404 Govind Singh
2019-02-02 15:26 ` [PATCH v4 8/8] remoteproc: qcom: wcss: explicitly request exclusive reset control Govind Singh

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190202152626.1006-6-govinds@codeaurora.org \
    --to=govinds@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org linux-clk@archiver.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/ public-inbox