[PATCH V10 0/5] make mt7623 clock of hdmi stable

[PATCH V10 0/5] make mt7623 clock of hdmi stable

[wangyan wang]

From: Wangyan Wang <wangyan.wang@mediatek.com>

V10 adopt maintainer's suggestion.
Here is the change list between V9 & V10

1. Align the first character to the right of '(' in
mtk_hdmi_phy_clk_get_data() of "drm/mediatek: remove flag ..."
2. Align the first character to the right of '(' in
mtk_hdmi_pll_recalc_rate() of "drm/mediatek: make implementation ..." 
3. Align the first character to the right of '(' in
mtk_hdmi_pll_round_rate() of "drm/mediatek: no change ..."
4. move patch " drm/mediatek: make implementation ..." before
patch "drm/mediatek: no change parent ..." 
5. To make MT2701 HDMI stable, TVDPLL should not be adjusted and
it's the parent clock of HDMI phy, so HDMI phy could not adjust parent
rate. there are 3 steps to make MT2701 HDMI stable.
    1). remove flag CLK_SET_RATE_PARENT for mt2701 hdmi phy to not propagate
rate change to parent in "drm/mediatek: remove flag ...".
    2). Using new factor for tvdpll in mt2701 to match divider of DPI in
mt2701 in "drm/mediatek: using new...".
    3). No change parent rate in round_rate() for mt2701 hdmi phy in
"drm/mediatek: no change parent...".

6. Recalculate the rate of this clock, by querying hardware to
make implementation of recalc_rate() to match the definition.

Wangyan Wang (5):
  drm/mediatek: remove flag CLK_SET_RATE_PARENT for mt2701 hdmi phy
  drm/mediatek: fix the rate and divder of hdmi phy for MT2701
  drm/mediatek: using new factor for tvdpll in MT2701
  drm/mediatek: make implementation of recalc_rate() to match the definition
  drm/mediatek: no change parent rate in round_rate() for mt2701 hdmi phy

 03_27_ck.diff                                  | 91 ++++++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_dpi.c             |  8 +--
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        | 35 ++--------
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |  5 +-
 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 50 ++++++++++++--
 drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 23 +++++++
 patch1.diff                                    | 75 ++++++++++++++++++++
 patch_5_4.diff                                 | 95 ++++++++++++++++++++++++++
 remove_parent_flag.diff                        | 75 ++++++++++++++++++++
 9 files changed, 412 insertions(+), 45 deletions(-)
 create mode 100644 03_27_ck.diff
 create mode 100644 patch1.diff
 create mode 100644 patch_5_4.diff
 create mode 100644 remove_parent_flag.diff

-- 
2.14.1

[PATCH V10 1/5] drm/mediatek: remove flag CLK_SET_RATE_PARENT for mt2701 hdmi phy to not propagate rate change to parent

[wangyan wang]

From: Wangyan Wang <wangyan.wang@mediatek.com>

This is the first step to make MT2701 hdmi stable.
The parent rate of hdmi phy had set by DPI driver.
We should not set or change the parent rate of MT2701 hdmi phy,
as a result we should remove the flags of "CLK_SET_RATE_PARENT"
from the clock of MT2701 hdmi phy.

Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        | 13 +++++--------
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |  1 +
 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c |  1 +
 drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c |  1 +
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
index 4ef9c57ffd44..13bbaf997819 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
@@ -110,13 +110,11 @@ mtk_hdmi_phy_dev_get_ops(const struct mtk_hdmi_phy *hdmi_phy)
 		return NULL;
 }
 
-static void mtk_hdmi_phy_clk_get_ops(struct mtk_hdmi_phy *hdmi_phy,
-				     const struct clk_ops **ops)
+static void mtk_hdmi_phy_clk_get_data(struct mtk_hdmi_phy *hdmi_phy,
+				       struct clk_init_data *clk_init)
 {
-	if (hdmi_phy && hdmi_phy->conf && hdmi_phy->conf->hdmi_phy_clk_ops)
-		*ops = hdmi_phy->conf->hdmi_phy_clk_ops;
-	else
-		dev_err(hdmi_phy->dev, "Failed to get clk ops of phy\n");
+	clk_init->flags = hdmi_phy->conf->flags;
+	clk_init->ops = hdmi_phy->conf->hdmi_phy_clk_ops;
 }
 
 static int mtk_hdmi_phy_probe(struct platform_device *pdev)
@@ -129,7 +127,6 @@ static int mtk_hdmi_phy_probe(struct platform_device *pdev)
 	struct clk_init_data clk_init = {
 		.num_parents = 1,
 		.parent_names = (const char * const *)&ref_clk_name,
-		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
 	};
 
 	struct phy *phy;
@@ -167,7 +164,7 @@ static int mtk_hdmi_phy_probe(struct platform_device *pdev)
 	hdmi_phy->dev = dev;
 	hdmi_phy->conf =
 		(struct mtk_hdmi_phy_conf *)of_device_get_match_data(dev);
-	mtk_hdmi_phy_clk_get_ops(hdmi_phy, &clk_init.ops);
+	mtk_hdmi_phy_clk_get_data(hdmi_phy, &clk_init);
 	hdmi_phy->pll_hw.init = &clk_init;
 	hdmi_phy->pll = devm_clk_register(dev, &hdmi_phy->pll_hw);
 	if (IS_ERR(hdmi_phy->pll)) {
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
index f39b1fc66612..0045824c1be9 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
@@ -21,6 +21,7 @@ struct mtk_hdmi_phy;
 
 struct mtk_hdmi_phy_conf {
 	bool tz_disabled;
+	unsigned long flags;
 	const struct clk_ops *hdmi_phy_clk_ops;
 	void (*hdmi_phy_enable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
 	void (*hdmi_phy_disable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
diff --git a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
index fcc42dc6ea7f..67a814649e19 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
@@ -202,6 +202,7 @@ static void mtk_hdmi_phy_disable_tmds(struct mtk_hdmi_phy *hdmi_phy)
 
 struct mtk_hdmi_phy_conf mtk_hdmi_phy_2701_conf = {
 	.tz_disabled = true,
+	.flags = CLK_SET_RATE_GATE,
 	.hdmi_phy_clk_ops = &mtk_hdmi_phy_pll_ops,
 	.hdmi_phy_enable_tmds = mtk_hdmi_phy_enable_tmds,
 	.hdmi_phy_disable_tmds = mtk_hdmi_phy_disable_tmds,
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
index ed5916b27658..f44066875dcd 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
@@ -309,6 +309,7 @@ static void mtk_hdmi_phy_disable_tmds(struct mtk_hdmi_phy *hdmi_phy)
 }
 
 struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf = {
+	.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
 	.hdmi_phy_clk_ops = &mtk_hdmi_phy_pll_ops,
 	.hdmi_phy_enable_tmds = mtk_hdmi_phy_enable_tmds,
 	.hdmi_phy_disable_tmds = mtk_hdmi_phy_disable_tmds,
-- 
2.14.1

[PATCH V10 2/5] drm/mediatek: fix the rate and divder of hdmi phy for MT2701

[wangyan wang]

From: Wangyan Wang <wangyan.wang@mediatek.com>

Due to a clerical error,there is one zero less for 12800000.
Fix it for 128000000
Fixes: 0fc721b2968e ("drm/mediatek: add hdmi driver for MT2701 and MT7623")

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
index 67a814649e19..844e622f052c 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
@@ -116,8 +116,8 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	if (rate <= 64000000)
 		pos_div = 3;
-	else if (rate <= 12800000)
-		pos_div = 1;
+	else if (rate <= 128000000)
+		pos_div = 2;
 	else
 		pos_div = 1;
 
-- 
2.14.1

[PATCH V10 3/5] drm/mediatek: using new factor for tvdpll in MT2701

[wangyan wang]

From: Wangyan Wang <wangyan.wang@mediatek.com>

This is the second step to make MT2701 HDMI stable.
The factor depends on the divider of DPI in MT2701, therefore,
we should fix this factor to the right and new one.
Test: search ok

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 69c6e42dad6b..4a2f4a650494 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -662,13 +662,11 @@ static unsigned int mt8173_calculate_factor(int clock)
 static unsigned int mt2701_calculate_factor(int clock)
 {
 	if (clock <= 64000)
-		return 16;
-	else if (clock <= 128000)
-		return 8;
-	else if (clock <= 256000)
 		return 4;
-	else
+	else if (clock <= 128000)
 		return 2;
+	else
+		return 1;
 }
 
 static const struct mtk_dpi_conf mt8173_conf = {
-- 
2.14.1

[PATCH V10 4/5] drm/mediatek: make implementation of recalc_rate() to match the definition

[wangyan wang]

From: Wangyan Wang <wangyan.wang@mediatek.com>

Recalculate the rate of this clock, by querying hardware to
make implementation of recalc_rate() to match the definition.

Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        |  8 ------
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |  2 --
 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 39 +++++++++++++++++++++++---
 drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c |  8 ++++++
 4 files changed, 43 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
index 0879ce47d4c5..9e153e080739 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
@@ -29,14 +29,6 @@ long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
 	return rate;
 }
 
-unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
-				       unsigned long parent_rate)
-{
-	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
-
-	return hdmi_phy->pll_rate;
-}
-
 void mtk_hdmi_phy_clear_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
 			     u32 bits)
 {
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
index 0045824c1be9..d28b8d5ed2b4 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
@@ -51,8 +51,6 @@ void mtk_hdmi_phy_mask(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
 struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw);
 long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
 			     unsigned long *parent_rate);
-unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
-				       unsigned long parent_rate);
 
 extern struct platform_driver mtk_hdmi_phy_driver;
 extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf;
diff --git a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
index 844e622f052c..b24ea6651db4 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
@@ -79,7 +79,6 @@ static int mtk_hdmi_pll_prepare(struct clk_hw *hw)
 	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
 	usleep_range(80, 100);
 	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
-	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
 	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
 	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
 	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
@@ -94,7 +93,6 @@ static void mtk_hdmi_pll_unprepare(struct clk_hw *hw)
 	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
 	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
 	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
-	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
 	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
 	usleep_range(80, 100);
 	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
@@ -123,6 +121,7 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_PREDIV_MASK);
 	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
 	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IC),
 			  RG_HTPLL_IC_MASK);
 	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IR),
@@ -154,6 +153,40 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
+static unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+	unsigned long out_rate, val;
+
+	val = (readl(hdmi_phy->regs + HDMI_CON6)
+		   & RG_HTPLL_PREDIV_MASK) >> RG_HTPLL_PREDIV;
+	switch (val) {
+	case 0x00:
+		out_rate = parent_rate;
+		break;
+	case 0x01:
+		out_rate = parent_rate / 2;
+		break;
+	default:
+		out_rate = parent_rate / 4;
+		break;
+	}
+
+	val = (readl(hdmi_phy->regs + HDMI_CON6)
+		   & RG_HTPLL_FBKDIV_MASK) >> RG_HTPLL_FBKDIV;
+	out_rate *= (val + 1) * 2;
+	val = (readl(hdmi_phy->regs + HDMI_CON2)
+		   & RG_HDMITX_TX_POSDIV_MASK);
+
+	out_rate >>= (val >> RG_HDMITX_TX_POSDIV);
+
+	if (readl(hdmi_phy->regs + HDMI_CON2) & RG_HDMITX_EN_TX_POSDIV)
+		out_rate = out_rate / 5;
+
+	return out_rate;
+}
+
 static const struct clk_ops mtk_hdmi_phy_pll_ops = {
 	.prepare = mtk_hdmi_pll_prepare,
 	.unprepare = mtk_hdmi_pll_unprepare,
@@ -174,7 +207,6 @@ static void mtk_hdmi_phy_enable_tmds(struct mtk_hdmi_phy *hdmi_phy)
 	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
 	usleep_range(80, 100);
 	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
-	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
 	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
 	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
 	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
@@ -186,7 +218,6 @@ static void mtk_hdmi_phy_disable_tmds(struct mtk_hdmi_phy *hdmi_phy)
 	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
 	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
 	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
-	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
 	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
 	usleep_range(80, 100);
 	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
index f44066875dcd..625739b4e938 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
@@ -285,6 +285,14 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
+unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+	return hdmi_phy->pll_rate;
+}
+
 static const struct clk_ops mtk_hdmi_phy_pll_ops = {
 	.prepare = mtk_hdmi_pll_prepare,
 	.unprepare = mtk_hdmi_pll_unprepare,
-- 
2.14.1

[PATCH V10 5/5] drm/mediatek: no change parent rate in round_rate() for mt2701 hdmi phy

[wangyan wang]

From: Wangyan Wang <wangyan.wang@mediatek.com>

This is the third step to make MT2701 HDMI stable.
We should not change the rate of parent for hdmi phy when
doing round_rate for this clock. The parent clock of hdmi
phy must be the same as it. We change it when doing set_rate
only.

Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        | 14 --------------
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |  2 --
 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c |  6 ++++++
 drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 14 ++++++++++++++
 4 files changed, 20 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
index 9e153e080739..e3a6b50e0cf2 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
@@ -15,20 +15,6 @@ static const struct phy_ops mtk_hdmi_phy_dev_ops = {
 	.owner = THIS_MODULE,
 };
 
-long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
-			     unsigned long *parent_rate)
-{
-	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
-
-	hdmi_phy->pll_rate = rate;
-	if (rate <= 74250000)
-		*parent_rate = rate;
-	else
-		*parent_rate = rate / 2;
-
-	return rate;
-}
-
 void mtk_hdmi_phy_clear_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
 			     u32 bits)
 {
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
index d28b8d5ed2b4..2d8b3182470d 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
@@ -49,8 +49,6 @@ void mtk_hdmi_phy_set_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
 void mtk_hdmi_phy_mask(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
 		       u32 val, u32 mask);
 struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw);
-long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
-			     unsigned long *parent_rate);
 
 extern struct platform_driver mtk_hdmi_phy_driver;
 extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf;
diff --git a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
index b24ea6651db4..e3f05ad89b1e 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
@@ -106,6 +106,12 @@ static void mtk_hdmi_pll_unprepare(struct clk_hw *hw)
 	usleep_range(80, 100);
 }
 
+static long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long *parent_rate)
+{
+	return rate;
+}
+
 static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 				 unsigned long parent_rate)
 {
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
index 625739b4e938..78c638c29102 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
@@ -199,6 +199,20 @@ static void mtk_hdmi_pll_unprepare(struct clk_hw *hw)
 	usleep_range(100, 150);
 }
 
+long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *parent_rate)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+	hdmi_phy->pll_rate = rate;
+	if (rate <= 74250000)
+		*parent_rate = rate;
+	else
+		*parent_rate = rate / 2;
+
+	return rate;
+}
+
 static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 				 unsigned long parent_rate)
 {
-- 
2.14.1

Re: [PATCH V10 0/5] make mt7623 clock of hdmi stable

[CK Hu]

Hi, Wangyan:

This version still has alignment problem, but I've fixed it and for this
series,

Applied to mediatek-drm-fixes-5.1 [1], thanks.

[1]
https://github.com/ckhu-mediatek/linux.git-tags/commits/mediatek-drm-fixes-5.1

Regards,
CK

On Tue, 2019-04-09 at 14:53 +0800, wangyan wang wrote:
> From: Wangyan Wang <wangyan.wang@mediatek.com>
> 
> V10 adopt maintainer's suggestion.
> Here is the change list between V9 & V10
> 
> 1. Align the first character to the right of '(' in
> mtk_hdmi_phy_clk_get_data() of "drm/mediatek: remove flag ..."
> 2. Align the first character to the right of '(' in
> mtk_hdmi_pll_recalc_rate() of "drm/mediatek: make implementation ..." 
> 3. Align the first character to the right of '(' in
> mtk_hdmi_pll_round_rate() of "drm/mediatek: no change ..."
> 4. move patch " drm/mediatek: make implementation ..." before
> patch "drm/mediatek: no change parent ..." 
> 5. To make MT2701 HDMI stable, TVDPLL should not be adjusted and
> it's the parent clock of HDMI phy, so HDMI phy could not adjust parent
> rate. there are 3 steps to make MT2701 HDMI stable.
>     1). remove flag CLK_SET_RATE_PARENT for mt2701 hdmi phy to not propagate
> rate change to parent in "drm/mediatek: remove flag ...".
>     2). Using new factor for tvdpll in mt2701 to match divider of DPI in
> mt2701 in "drm/mediatek: using new...".
>     3). No change parent rate in round_rate() for mt2701 hdmi phy in
> "drm/mediatek: no change parent...".
> 
> 6. Recalculate the rate of this clock, by querying hardware to
> make implementation of recalc_rate() to match the definition.
> 
> Wangyan Wang (5):
>   drm/mediatek: remove flag CLK_SET_RATE_PARENT for mt2701 hdmi phy
>   drm/mediatek: fix the rate and divder of hdmi phy for MT2701
>   drm/mediatek: using new factor for tvdpll in MT2701
>   drm/mediatek: make implementation of recalc_rate() to match the definition
>   drm/mediatek: no change parent rate in round_rate() for mt2701 hdmi phy
> 
>  03_27_ck.diff                                  | 91 ++++++++++++++++++++++++
>  drivers/gpu/drm/mediatek/mtk_dpi.c             |  8 +--
>  drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        | 35 ++--------
>  drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |  5 +-
>  drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 50 ++++++++++++--
>  drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 23 +++++++
>  patch1.diff                                    | 75 ++++++++++++++++++++
>  patch_5_4.diff                                 | 95 ++++++++++++++++++++++++++
>  remove_parent_flag.diff                        | 75 ++++++++++++++++++++
>  9 files changed, 412 insertions(+), 45 deletions(-)
>  create mode 100644 03_27_ck.diff
>  create mode 100644 patch1.diff
>  create mode 100644 patch_5_4.diff
>  create mode 100644 remove_parent_flag.diff
>