Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Douglas Anderson <dianders@chromium.org>
To: Heiko Stuebner <heiko@sntech.de>
Cc: Jonas Karlman <jonas@kwiboo.se>, Tomasz Figa <tfiga@chromium.org>,
	Randy Li <ayaka@soulik.info>, Ziyuan Xu <xzy.xu@rock-chips.com>,
	Ezequiel Garcia <ezequiel@collabora.com>,
	ryandcase@chromium.org, Elaine Zhang <zhangqing@rock-chips.com>,
	mka@chromium.org, Douglas Anderson <dianders@chromium.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] clk: rockchip: Fix video codec clocks on rk3288
Date: Thu, 11 Apr 2019 06:55:55 -0700
Message-ID: <20190411135555.235625-1-dianders@chromium.org> (raw)

It appears that there is a typo in the rk3288 TRM.  For
GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu".  It's
the other way around.

How do I know?  Here's my evidence:

1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec
   using the new muxgrf type on rk3288") we always pretended that we
   were using "aclk_vdpu" and the comment in the code said that this
   matched the default setting in the system.  In fact the default
   setting is 0 according to the TRM and according to reading memory
   at bootup.  In addition rk3288-based Chromebooks ran like this and
   the video codecs worked.
2. With the existing clock code if you boot up and try to enable the
   new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused"
   on the command line), you get errors like "failed to get ack on
   domain 'pd_video', val=0x80208".  After flipping vepu/vdpu things
   init OK.
3. If I export and add both the vepu and vdpu to the list of clocks
   for RK3288_PD_VIDEO I can get past the power domain errors, but now
   I freeze when the vpu_mmu gets initted.
4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up
   and probes OK showing that somehow the "vdpu" was important to keep
   enabled.  This is because we were actually using it as a parent.
5. After this change I can hack "aclk_vcodec_pre" to parent from
   "aclk_vepu" using assigned-clocks and the video codec still probes
   OK.
6. Rockchip has said so on the mailing list [1].

...so let's fix it.

Let's also add CLK_SET_RATE_PARENT to "aclk_vcodec_pre" as suggested
by Jonas Karlman.  Prior to the same commit you could do
clk_set_rate() on "aclk_vcodec" and it would change "aclk_vdpu".
That's because "aclk_vcodec" was a simple gate clock (always gets
CLK_SET_RATE_PARENT) and its direct parent was "aclk_vdpu".  After
that commit "aclk_vcodec_pre" gets in the way so we need to add
CLK_SET_RATE_PARENT to it too.

[1] https://lkml.kernel.org/r/1d17b015-9e17-34b9-baf8-c285dc1957aa@rock-chips.com

Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288")
Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Suggested-by: Randy Li <ayaka@soulik.info>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

Changes in v2:
- Now also has CLK_SET_RATE_PARENT for "aclk_vcodec_pre"
- Added Suggested-by tags for prior work
- Added link to Elaine saying that this is indeed correct

 drivers/clk/rockchip/clk-rk3288.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 5a67b7869960..51e8e799debb 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -219,7 +219,7 @@ PNAME(mux_hsadcout_p)	= { "hsadc_src", "ext_hsadc" };
 PNAME(mux_edp_24m_p)	= { "ext_edp_24m", "xin24m" };
 PNAME(mux_tspout_p)	= { "cpll", "gpll", "npll", "xin27m" };
 
-PNAME(mux_aclk_vcodec_pre_p)	= { "aclk_vepu", "aclk_vdpu" };
+PNAME(mux_aclk_vcodec_pre_p)	= { "aclk_vdpu", "aclk_vepu" };
 PNAME(mux_usbphy480m_p)		= { "sclk_otgphy1_480m", "sclk_otgphy2_480m",
 				    "sclk_otgphy0_480m" };
 PNAME(mux_hsicphy480m_p)	= { "cpll", "gpll", "usbphy480m_src" };
@@ -420,7 +420,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb480m_p, 0,
 			RK3288_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
 			RK3288_CLKGATE_CON(3), 11, GFLAGS),
-	MUXGRF(0, "aclk_vcodec_pre", mux_aclk_vcodec_pre_p, 0,
+	MUXGRF(0, "aclk_vcodec_pre", mux_aclk_vcodec_pre_p, CLK_SET_RATE_PARENT,
 			RK3288_GRF_SOC_CON(0), 7, 1, MFLAGS),
 	GATE(ACLK_VCODEC, "aclk_vcodec", "aclk_vcodec_pre", 0,
 		RK3288_CLKGATE_CON(9), 0, GFLAGS),
-- 
2.21.0.392.gf8f6787159e-goog


             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-11 13:55 Douglas Anderson [this message]
2019-04-12 11:22 ` Heiko Stübner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190411135555.235625-1-dianders@chromium.org \
    --to=dianders@chromium.org \
    --cc=ayaka@soulik.info \
    --cc=ezequiel@collabora.com \
    --cc=heiko@sntech.de \
    --cc=jonas@kwiboo.se \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mka@chromium.org \
    --cc=mturquette@baylibre.com \
    --cc=ryandcase@chromium.org \
    --cc=sboyd@kernel.org \
    --cc=tfiga@chromium.org \
    --cc=xzy.xu@rock-chips.com \
    --cc=zhangqing@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git