linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lubomir Rintel <lkundrak@v3.sk>
To: Olof Johansson <olof@lixom.net>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Marc Zyngier <maz@kernel.org>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Russell King <linux@armlinux.org.uk>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
	Lubomir Rintel <lkundrak@v3.sk>
Subject: [PATCH 17/19] ARM: mmp: remove MMP3 USB PHY registers from regs-usb.h
Date: Fri,  9 Aug 2019 11:31:56 +0200	[thread overview]
Message-ID: <20190809093158.7969-18-lkundrak@v3.sk> (raw)
In-Reply-To: <20190809093158.7969-1-lkundrak@v3.sk>

Nothing in mach-mmp/ uses them and they belong to the PHY driver.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 arch/arm/mach-mmp/regs-usb.h | 94 ------------------------------------
 1 file changed, 94 deletions(-)

diff --git a/arch/arm/mach-mmp/regs-usb.h b/arch/arm/mach-mmp/regs-usb.h
index d9f08c1601542..ed0d1aa0ad6c9 100644
--- a/arch/arm/mach-mmp/regs-usb.h
+++ b/arch/arm/mach-mmp/regs-usb.h
@@ -121,100 +121,6 @@
 
 #define UTMI_OTG_ADDON_OTG_ON			(1 << 0)
 
-/* For MMP3 USB Phy */
-#define USB2_PLL_REG0		0x4
-#define USB2_PLL_REG1		0x8
-#define USB2_TX_REG0		0x10
-#define USB2_TX_REG1		0x14
-#define USB2_TX_REG2		0x18
-#define USB2_RX_REG0		0x20
-#define USB2_RX_REG1		0x24
-#define USB2_RX_REG2		0x28
-#define USB2_ANA_REG0		0x30
-#define USB2_ANA_REG1		0x34
-#define USB2_ANA_REG2		0x38
-#define USB2_DIG_REG0		0x3C
-#define USB2_DIG_REG1		0x40
-#define USB2_DIG_REG2		0x44
-#define USB2_DIG_REG3		0x48
-#define USB2_TEST_REG0		0x4C
-#define USB2_TEST_REG1		0x50
-#define USB2_TEST_REG2		0x54
-#define USB2_CHARGER_REG0	0x58
-#define USB2_OTG_REG0		0x5C
-#define USB2_PHY_MON0		0x60
-#define USB2_RESETVE_REG0	0x64
-#define USB2_ICID_REG0		0x78
-#define USB2_ICID_REG1		0x7C
-
-/* USB2_PLL_REG0 */
-/* This is for Ax stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3		0
-#define USB2_PLL_FBDIV_MASK_MMP3		(0xFF << 0)
-
-#define USB2_PLL_REFDIV_SHIFT_MMP3		8
-#define USB2_PLL_REFDIV_MASK_MMP3		(0xF << 8)
-
-#define USB2_PLL_VDD12_SHIFT_MMP3		12
-#define USB2_PLL_VDD18_SHIFT_MMP3		14
-
-/* This is for B0 stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3_B0		0
-#define USB2_PLL_REFDIV_SHIFT_MMP3_B0		9
-#define USB2_PLL_VDD18_SHIFT_MMP3_B0		14
-#define USB2_PLL_FBDIV_MASK_MMP3_B0		0x01FF
-#define USB2_PLL_REFDIV_MASK_MMP3_B0		0x3E00
-
-#define USB2_PLL_CAL12_SHIFT_MMP3		0
-#define USB2_PLL_CALI12_MASK_MMP3		(0x3 << 0)
-
-#define USB2_PLL_VCOCAL_START_SHIFT_MMP3	2
-
-#define USB2_PLL_KVCO_SHIFT_MMP3		4
-#define USB2_PLL_KVCO_MASK_MMP3			(0x7<<4)
-
-#define USB2_PLL_ICP_SHIFT_MMP3			8
-#define USB2_PLL_ICP_MASK_MMP3			(0x7<<8)
-
-#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3		12
-
-#define USB2_PLL_PU_PLL_SHIFT_MMP3		13
-#define USB2_PLL_PU_PLL_MASK			(0x1 << 13)
-
-#define USB2_PLL_READY_MASK_MMP3		(0x1 << 15)
-
-/* USB2_TX_REG0 */
-#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3		8
-#define USB2_TX_IMPCAL_VTH_MASK_MMP3		(0x7 << 8)
-
-#define USB2_TX_RCAL_START_SHIFT_MMP3		13
-
-/* USB2_TX_REG1 */
-#define USB2_TX_CK60_PHSEL_SHIFT_MMP3		0
-#define USB2_TX_CK60_PHSEL_MASK_MMP3		(0xf << 0)
-
-#define USB2_TX_AMP_SHIFT_MMP3			4
-#define USB2_TX_AMP_MASK_MMP3			(0x7 << 4)
-
-#define USB2_TX_VDD12_SHIFT_MMP3		8
-#define USB2_TX_VDD12_MASK_MMP3			(0x3 << 8)
-
-/* USB2_TX_REG2 */
-#define USB2_TX_DRV_SLEWRATE_SHIFT		10
-
-/* USB2_RX_REG0 */
-#define USB2_RX_SQ_THRESH_SHIFT_MMP3		4
-#define USB2_RX_SQ_THRESH_MASK_MMP3		(0xf << 4)
-
-#define USB2_RX_SQ_LENGTH_SHIFT_MMP3		10
-#define USB2_RX_SQ_LENGTH_MASK_MMP3		(0x3 << 10)
-
-/* USB2_ANA_REG1*/
-#define USB2_ANA_PU_ANA_SHIFT_MMP3		14
-
-/* USB2_OTG_REG0 */
-#define USB2_OTG_PU_OTG_SHIFT_MMP3		3
-
 /* fsic registers */
 #define FSIC_MISC			0x4
 #define FSIC_INT			0x28
-- 
2.21.0


  parent reply	other threads:[~2019-08-09  9:33 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-09  9:31 [PATCH 00/19] Initial support for Marvell MMP3 SoC Lubomir Rintel
2019-08-09  9:31 ` [PATCH 01/19] dt-bindings: arm: cpu: Add Marvell MMP3 SMP enable method Lubomir Rintel
2019-08-12 18:57   ` Rob Herring
2019-08-09  9:31 ` [PATCH 02/19] dt-bindings: arm: mrvl: Document MMP3 compatible string Lubomir Rintel
2019-08-21 21:03   ` Rob Herring
2019-08-22  8:12     ` Lubomir Rintel
2019-08-22 12:42       ` Rob Herring
2019-08-09  9:31 ` [PATCH 03/19] dt-bindings: mrvl,intc: Add a MMP3 interrupt controller Lubomir Rintel
2019-08-21 21:11   ` Rob Herring
2019-08-09  9:31 ` [PATCH 04/19] dt-bindings: phy-mmp3-usb: Add bindings Lubomir Rintel
2019-08-21 21:13   ` Rob Herring
2019-08-09  9:31 ` [PATCH 05/19] irqchip/mmp: do not use of_address_to_resource() to get mux regs Lubomir Rintel
2019-08-09 12:12   ` Marc Zyngier
2019-08-16 18:41     ` Lubomir Rintel
2019-08-17 18:17       ` Marc Zyngier
2019-08-09  9:31 ` [PATCH 06/19] irqchip/mmp: add missing chained_irq_{enter,exit}() Lubomir Rintel
2019-08-09 10:56   ` Marc Zyngier
2019-08-09  9:31 ` [PATCH 07/19] irqchip/mmp: mask off interrupts from other cores Lubomir Rintel
2019-08-09 12:18   ` Marc Zyngier
2019-08-16 18:15     ` Lubomir Rintel
2019-08-09  9:31 ` [PATCH 08/19] irqchip/mmp: coexist with GIC root IRQ controller Lubomir Rintel
2019-08-09  9:31 ` [PATCH 09/19] ARM: l2c: add definition for FWA in PL310 aux register Lubomir Rintel
2019-08-09  9:31 ` [PATCH 10/19] ARM: mmp: don't select CACHE_TAUROS2 on all ARCH_MMP Lubomir Rintel
2019-08-09  9:31 ` [PATCH 11/19] ARM: mmp: map the PGU as well Lubomir Rintel
2019-08-09  9:31 ` [PATCH 12/19] ARM: mmp: DT: convert timer driver to use TIMER_OF_DECLARE Lubomir Rintel
2019-08-09  9:31 ` [PATCH 13/19] ARM: mmp: define MMP_CHIPID by the means of CIU_REG() Lubomir Rintel
2019-08-09  9:31 ` [PATCH 14/19] ARM: mmp: add support for MMP3 SoC Lubomir Rintel
2019-08-16 18:06   ` Stephen Boyd
2019-08-09  9:31 ` [PATCH 15/19] ARM: mmp: add SMP support Lubomir Rintel
2019-08-16 18:11   ` Florian Fainelli
2019-08-09  9:31 ` [PATCH 16/19] ARM: mmp: move cputype.h to include/linux/soc/ Lubomir Rintel
2019-08-09  9:31 ` Lubomir Rintel [this message]
2019-08-09  9:31 ` [PATCH 18/19] phy: phy-mmp3-usb: add a new driver Lubomir Rintel
2019-08-09  9:31 ` [PATCH 19/19] ARM: dts: mmp3: Add MMP3 SoC dts file Lubomir Rintel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190809093158.7969-18-lkundrak@v3.sk \
    --to=lkundrak@v3.sk \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).