[PATCH v4 03/10] dt-bindings: mailbox: Add a sunxi message box binding

From: Samuel Holland <samuel@sholland.org>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Jassi Brar <jassisinghbrar@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Corentin Labbe <clabbe.montjoie@gmail.com>,
	Vasily Khoruzhick <anarsoul@gmail.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-sunxi@googlegroups.com,
	Samuel Holland <samuel@sholland.org>,
	Rob Herring <robh@kernel.org>
Subject: [PATCH v4 03/10] dt-bindings: mailbox: Add a sunxi message box binding
Date: Mon, 19 Aug 2019 22:23:04 -0500
Message-ID: <20190820032311.6506-4-samuel@sholland.org> (raw)
In-Reply-To: <20190820032311.6506-1-samuel@sholland.org>

This mailbox hardware is present in Allwinner sun8i, sun9i, and sun50i
SoCs. Add a device tree binding for it.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
 .../mailbox/allwinner,sunxi-msgbox.yaml       | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/allwinner,sunxi-msgbox.yaml

diff --git a/Documentation/devicetree/bindings/mailbox/allwinner,sunxi-msgbox.yaml b/Documentation/devicetree/bindings/mailbox/allwinner,sunxi-msgbox.yaml
new file mode 100644
index 000000000000..f34a1909ab2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/allwinner,sunxi-msgbox.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/allwinner,sunxi-msgbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner sunxi Message Box
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description: |
+  The hardware message box on sun6i and newer sunxi SoCs is a two-user mailbox
+  controller containing 8 unidirectional FIFOs. An interrupt is raised for
+  received messages, but software must poll to know when a transmitted message
+  has been acknowledged by the remote user. Each FIFO can hold four 32-bit
+  messages; when a FIFO is full, clients must wait before more transmissions.
+
+  Refer to ./mailbox.txt for generic information about mailbox device-tree
+  bindings.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - allwinner,sun8i-a83t-msgbox
+              - allwinner,sun8i-h3-msgbox
+              - allwinner,sun9i-a80-msgbox
+              - allwinner,sun50i-a64-msgbox
+              - allwinner,sun50i-h6-msgbox
+          - const: allwinner,sun6i-a31-msgbox
+      - items:
+          - const: allwinner,sun6i-a31-msgbox
+
+  reg:
+    items:
+      - description: MMIO register range
+
+  clocks:
+    maxItems: 1
+    description: bus clock
+
+  resets:
+    maxItems: 1
+    description: bus reset
+
+  interrupts:
+    maxItems: 1
+    description: controller interrupt
+
+  '#mbox-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - interrupts
+  - '#mbox-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-h3-ccu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+    msgbox: mailbox@1c17000 {
+            compatible = "allwinner,sun8i-h3-msgbox",
+                         "allwinner,sun6i-a31-msgbox";
+            reg = <0x01c17000 0x1000>;
+            clocks = <&ccu CLK_BUS_MSGBOX>;
+            resets = <&ccu RST_BUS_MSGBOX>;
+            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+            #mbox-cells = <1>;
+    };
+
+...
-- 
2.21.0

