Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Lukasz Luba <l.luba@partner.samsung.com>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
	linux-clk@vger.kernel.org
Cc: mturquette@baylibre.com, sboyd@kernel.org,
	b.zolnierkie@samsung.com, krzk@kernel.org, kgene@kernel.org,
	mark.rutland@arm.com, robh+dt@kernel.org, cw00.choi@samsung.com,
	kyungmin.park@samsung.com, m.szyprowski@samsung.com,
	s.nawrocki@samsung.com, myungjoo.ham@samsung.com,
	keescook@chromium.org, tony@atomide.com, jroedel@suse.de,
	treding@nvidia.com, digetx@gmail.com, gregkh@linuxfoundation.org,
	willy.mh.wolff.ml@gmail.com,
	Lukasz Luba <l.luba@partner.samsung.com>
Subject: [PATCH v13 7/8] ARM: dts: exynos: add DMC device for exynos5422
Date: Wed, 21 Aug 2019 12:43:02 +0200
Message-ID: <20190821104303.32079-8-l.luba@partner.samsung.com> (raw)
In-Reply-To: <CGME20190821104324eucas1p16bdeb27250c8c9fa87591d6bd9743a17@eucas1p1.samsung.com>

Add description of Dynamic Memory Controller and PPMU counters.
They are used by exynos5422-dmc driver.
There is a definition of the memory chip, which is then used during
calculation of timings for each OPP.
The algorithm in the driver needs these two sets to bound the timings.

Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
---
 arch/arm/boot/dts/exynos5420.dtsi             |  71 +++++++++++
 arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 116 ++++++++++++++++++
 2 files changed, 187 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 97dc10915680..ac49373baae7 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -237,6 +237,29 @@
 			status = "disabled";
 		};
 
+		dmc: memory-controller@10c20000 {
+			compatible = "samsung,exynos5422-dmc";
+			reg = <0x10c20000 0x100>, <0x10c30000 0x100>;
+			clocks = <&clock CLK_FOUT_SPLL>,
+				 <&clock CLK_MOUT_SCLK_SPLL>,
+				 <&clock CLK_FF_DOUT_SPLL2>,
+				 <&clock CLK_FOUT_BPLL>,
+				 <&clock CLK_MOUT_BPLL>,
+				 <&clock CLK_SCLK_BPLL>,
+				 <&clock CLK_MOUT_MX_MSPLL_CCORE>,
+				 <&clock CLK_MOUT_MCLK_CDREX>;
+			clock-names = "fout_spll",
+				      "mout_sclk_spll",
+				      "ff_dout_spll2",
+				      "fout_bpll",
+				      "mout_bpll",
+				      "sclk_bpll",
+				      "mout_mx_mspll_ccore",
+				      "mout_mclk_cdrex";
+			samsung,syscon-clk = <&clock>;
+			status = "disabled";
+		};
+
 		nocp_mem0_0: nocp@10ca1000 {
 			compatible = "samsung,exynos5420-nocp";
 			reg = <0x10CA1000 0x200>;
@@ -273,6 +296,54 @@
 			status = "disabled";
 		};
 
+		ppmu_dmc0_0: ppmu@10d00000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d00000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 {
+					event-name = "ppmu-event3-dmc0_0";
+				};
+			};
+		};
+
+		ppmu_dmc0_1: ppmu@10d10000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d10000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX0_1>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 {
+					event-name = "ppmu-event3-dmc0_1";
+				};
+			};
+		};
+
+		ppmu_dmc1_0: ppmu@10d60000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d60000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX1_0>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 {
+					event-name = "ppmu-event3-dmc1_0";
+				};
+			};
+		};
+
+		ppmu_dmc1_1: ppmu@10d70000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d70000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX1_1>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 {
+					event-name = "ppmu-event3-dmc1_1";
+				};
+			};
+		};
+
 		gsc_pd: power-domain@10044000 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10044000 0x20>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 829147e320e0..fe885ca969af 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -34,6 +34,97 @@
 			clock-frequency = <24000000>;
 		};
 	};
+
+	dmc_opp_table: opp_table2 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <165000000>;
+			opp-microvolt = <875000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <206000000>;
+			opp-microvolt = <875000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <275000000>;
+			opp-microvolt = <875000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <413000000>;
+			opp-microvolt = <887500>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <543000000>;
+			opp-microvolt = <937500>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <633000000>;
+			opp-microvolt = <1012500>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <728000000>;
+			opp-microvolt = <1037500>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <825000000>;
+			opp-microvolt = <1050000>;
+		};
+	};
+
+	samsung_K3QF2F20DB: lpddr3 {
+		compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
+		density		= <16384>;
+		io-width	= <32>;
+		#address-cells  = <1>;
+		#size-cells     = <0>;
+
+		tRFC-min-tck		= <17>;
+		tRRD-min-tck		= <2>;
+		tRPab-min-tck		= <2>;
+		tRPpb-min-tck		= <2>;
+		tRCD-min-tck		= <3>;
+		tRC-min-tck		= <6>;
+		tRAS-min-tck		= <5>;
+		tWTR-min-tck		= <2>;
+		tWR-min-tck		= <7>;
+		tRTP-min-tck		= <2>;
+		tW2W-C2C-min-tck	= <0>;
+		tR2R-C2C-min-tck	= <0>;
+		tWL-min-tck		= <8>;
+		tDQSCK-min-tck		= <5>;
+		tRL-min-tck		= <14>;
+		tFAW-min-tck		= <5>;
+		tXSR-min-tck		= <12>;
+		tXP-min-tck		= <2>;
+		tCKE-min-tck		= <2>;
+		tCKESR-min-tck		= <2>;
+		tMRD-min-tck		= <5>;
+
+		timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
+			compatible	= "jedec,lpddr3-timings";
+			reg		= <800000000>; /* workaround: it shows max-freq */
+			min-freq	= <100000000>;
+			tRFC		= <65000>;
+			tRRD		= <6000>;
+			tRPab		= <12000>;
+			tRPpb		= <12000>;
+			tRCD		= <10000>;
+			tRC		= <33750>;
+			tRAS		= <23000>;
+			tWTR		= <3750>;
+			tWR		= <7500>;
+			tRTP		= <3750>;
+			tW2W-C2C	= <0>;
+			tR2R-C2C	= <0>;
+			tFAW		= <25000>;
+			tXSR		= <70000>;
+			tXP		= <3750>;
+			tCKE		= <3750>;
+			tCKESR		= <3750>;
+			tMRD		= <7000>;
+		};
+	};
 };
 
 &adc {
@@ -132,6 +223,15 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&dmc {
+	devfreq-events = <&ppmu_event3_dmc0_0>,	<&ppmu_event3_dmc0_1>,
+			<&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
+	device-handle = <&samsung_K3QF2F20DB>;
+	operating-points-v2 = <&dmc_opp_table>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
 &hsi2c_4 {
 	status = "okay";
 
@@ -634,6 +734,22 @@
 	};
 };
 
+&ppmu_dmc0_0 {
+	status = "okay";
+};
+
+&ppmu_dmc0_1 {
+	status = "okay";
+};
+
+&ppmu_dmc1_0 {
+	status = "okay";
+};
+
+&ppmu_dmc1_1 {
+	status = "okay";
+};
+
 &tmu_cpu0 {
 	vtmu-supply = <&ldo7_reg>;
 };
-- 
2.17.1


  parent reply index

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20190821104316eucas1p2ecd715f3105921ec83e0acf1291201f8@eucas1p2.samsung.com>
2019-08-21 10:42 ` [PATCH v13 0/8] Exynos5 Dynamic Memory Controller driver Lukasz Luba
     [not found]   ` <CGME20190821104318eucas1p1065a4a9d8366095e4d758519f88e8aba@eucas1p1.samsung.com>
2019-08-21 10:42     ` [PATCH v13 1/8] dt-bindings: ddr: rename lpddr2 directory Lukasz Luba
     [not found]   ` <CGME20190821104319eucas1p10db51f7a181cae024465cc775292d2b1@eucas1p1.samsung.com>
2019-08-21 10:42     ` [PATCH v13 2/8] dt-bindings: ddr: add LPDDR3 memories Lukasz Luba
     [not found]   ` <CGME20190821104320eucas1p10c911c2ce59007bcf6c039f52b869656@eucas1p1.samsung.com>
2019-08-21 10:42     ` [PATCH v13 3/8] drivers: memory: extend of_memory by LPDDR3 support Lukasz Luba
2019-09-04 18:31       ` Krzysztof Kozlowski
2019-09-06  8:42         ` Lukasz Luba
     [not found]   ` <CGME20190821104321eucas1p284816ade1890e9660008c0428c6d56e0@eucas1p2.samsung.com>
2019-08-21 10:42     ` [PATCH v13 4/8] dt-bindings: memory-controllers: add Exynos5422 DMC device description Lukasz Luba
     [not found]   ` <CGME20190821104323eucas1p1ab979133de45373866e9db1a5f63fb76@eucas1p1.samsung.com>
2019-08-21 10:43     ` [PATCH v13 5/8] drivers: memory: add DMC driver for Exynos5422 Lukasz Luba
2019-09-04 18:35       ` Krzysztof Kozlowski
2019-09-06  8:44         ` Lukasz Luba
     [not found]   ` <CGME20190821104323eucas1p2e0956d08d3d6c3934760ea76c2de0d57@eucas1p2.samsung.com>
2019-08-21 10:43     ` [PATCH v13 6/8] ARM: dts: exynos: add syscon to clock compatible Lukasz Luba
     [not found]   ` <CGME20190821104324eucas1p16bdeb27250c8c9fa87591d6bd9743a17@eucas1p1.samsung.com>
2019-08-21 10:43     ` Lukasz Luba [this message]
2019-09-04 18:25       ` [PATCH v13 7/8] ARM: dts: exynos: add DMC device for exynos5422 Krzysztof Kozlowski
2019-09-06  8:41         ` Lukasz Luba
     [not found]   ` <CGME20190821104326eucas1p1f22b49095a17f0b303910c391ff1e906@eucas1p1.samsung.com>
2019-08-21 10:43     ` [PATCH v13 8/8] ARM: exynos_defconfig: enable DMC driver Lukasz Luba
2019-10-02 17:19       ` Krzysztof Kozlowski
2019-09-04 10:16   ` [PATCH v13 0/8] Exynos5 Dynamic Memory Controller driver Krzysztof Kozlowski
2019-09-04 14:59     ` Lukasz Luba
2019-09-04 18:40   ` Krzysztof Kozlowski
2019-09-06  8:47     ` Lukasz Luba
2019-10-01 19:29   ` Krzysztof Kozlowski
2019-10-02  6:01     ` Lukasz Luba

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190821104303.32079-8-l.luba@partner.samsung.com \
    --to=l.luba@partner.samsung.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=digetx@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jroedel@suse.de \
    --cc=keescook@chromium.org \
    --cc=kgene@kernel.org \
    --cc=krzk@kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=robh+dt@kernel.org \
    --cc=s.nawrocki@samsung.com \
    --cc=sboyd@kernel.org \
    --cc=tony@atomide.com \
    --cc=treding@nvidia.com \
    --cc=willy.mh.wolff.ml@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org linux-clk@archiver.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/ public-inbox