Linux-Clk Archive on
 help / color / Atom feed
From: Govind Singh <>
	Govind Singh <>
Subject: [PATCH_v3 0/2] Add Q6SSTOP clock controller for QCS404
Date: Fri, 23 Aug 2019 18:43:59 +0530
Message-ID: <> (raw)

Add support for the Q6SSTOP clock control used on qcs404
based devices. This would allow wcss remoteproc driver to
control the required WCSS Q6SSTOP clock/reset controls to
bring the subsystem out of reset and shutdown the WCSS Q6DSP.

Changes in v3:
    - Fixed dt binding errors.

Changes in v2:
    - changed binding doc to yaml format.
    - Fixed alignment in q6sstop cc driver.

Govind Singh (2):
  dt-bindings: clock: qcom: Add QCOM Q6SSTOP clock controller bindings
  clk: qcom: Add Q6SSTOP clock controller for QCS404

 .../bindings/clock/qcom,q6sstopcc.yaml        |  47 ++++
 drivers/clk/qcom/Kconfig                      |   8 +
 drivers/clk/qcom/Makefile                     |   1 +
 drivers/clk/qcom/q6sstop-qcs404.c             | 223 ++++++++++++++++++
 .../dt-bindings/clock/qcom,q6sstopcc-qcs404.h |  18 ++
 5 files changed, 297 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
 create mode 100644 drivers/clk/qcom/q6sstop-qcs404.c
 create mode 100644 include/dt-bindings/clock/qcom,q6sstopcc-qcs404.h

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

             reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-23 13:13 Govind Singh [this message]
2019-08-23 13:14 ` [PATCH_v3 1/2] dt-bindings: clock: qcom: Add QCOM Q6SSTOP clock controller bindings Govind Singh
2019-08-27 12:27   ` Rob Herring
2019-09-06 20:31     ` Stephen Boyd
2019-10-11 13:35       ` Govind Singh
2019-08-23 13:14 ` [PATCH_v3 2/2] clk: qcom: Add Q6SSTOP clock controller for QCS404 Govind Singh

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on

Archives are clonable:
	git clone --mirror linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ \
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone