Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/4] clk: ti: re-work divider clock support
@ 2019-10-02 12:06 Tero Kristo
  2019-10-02 12:06 ` [PATCH 1/4] clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table Tero Kristo
                   ` (4 more replies)
  0 siblings, 5 replies; 12+ messages in thread
From: Tero Kristo @ 2019-10-02 12:06 UTC (permalink / raw)
  To: linux-clk, sboyd, mturquette; +Cc: linux-omap, tony, aford173, tomi.valkeinen

Hi,

The existing divider clock support appears to have an inherent bug
because of the bit field width implementation and limitation of divider
values based on this. The limitation by bit field only is not enough,
as we can have divider settings which accept only certain range of
dividers within the full range of the bit-field.

Because of this, the divider clock is re-implemented to use min,max,mask
values instead of just the bit-field.

-Tero


--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, back to index

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-02 12:06 [PATCH 0/4] clk: ti: re-work divider clock support Tero Kristo
2019-10-02 12:06 ` [PATCH 1/4] clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table Tero Kristo
2019-10-02 12:41   ` Adam Ford
2019-10-02 12:06 ` [PATCH 2/4] clk: ti: divider: cleanup ti_clk_parse_divider_data API Tero Kristo
2019-10-02 12:06 ` [PATCH 3/4] clk: ti: divider: convert to use min,max,mask instead of width Tero Kristo
2019-10-02 12:06 ` [PATCH 4/4] ARM: dts: omap3: fix DPLL4 M4 divider max value Tero Kristo
2019-10-24  8:03 ` [PATCH 0/4] clk: ti: re-work divider clock support Tero Kristo
2019-10-24 13:40   ` Tony Lindgren
2019-10-28  9:59   ` Stephen Boyd
2019-10-28 10:23     ` Tero Kristo
2019-10-28 11:36       ` Tomi Valkeinen
2019-10-28 13:57         ` Tony Lindgren

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git