linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Jeffery <andrew@aj.id.au>
To: linux-clk@vger.kernel.org
Cc: mturquette@baylibre.com, sboyd@kernel.org, joel@jms.id.au,
	robh+dt@kernel.org, mark.rutland@arm.com,
	linux-arm-kernel@lists.infradead.org,
	linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: [PATCH 2/2] clk: ast2600: Add RMII RCLK gates for all four MACs
Date: Tue,  8 Oct 2019 22:05:53 +1030	[thread overview]
Message-ID: <20191008113553.13662-3-andrew@aj.id.au> (raw)
In-Reply-To: <20191008113553.13662-1-andrew@aj.id.au>

RCLK is a fixed 50MHz clock derived from HPLL/HCLK that is described by a
single gate for each MAC.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 drivers/clk/clk-ast2600.c | 47 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index 1c1bb39bb04e..3d6fc781fee0 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -15,7 +15,7 @@
 
 #include "clk-aspeed.h"
 
-#define ASPEED_G6_NUM_CLKS		67
+#define ASPEED_G6_NUM_CLKS		71
 
 #define ASPEED_G6_SILICON_REV		0x004
 
@@ -40,6 +40,9 @@
 
 #define ASPEED_G6_STRAP1		0x500
 
+#define ASPEED_MAC12_CLK_DLY		0x340
+#define ASPEED_MAC34_CLK_DLY		0x350
+
 /* Globally visible clocks */
 static DEFINE_SPINLOCK(aspeed_g6_clk_lock);
 
@@ -485,6 +488,11 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(hw);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_SDIO] = hw;
 
+	/* MAC1/2 RMII 50MHz RCLK */
+	hw = clk_hw_register_fixed_rate(dev, "mac12rclk", "hpll", 0, 50000000);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
 	/* MAC1/2 AHB bus clock divider */
 	hw = clk_hw_register_divider_table(dev, "mac12", "hpll", 0,
 			scu_g6_base + ASPEED_G6_CLK_SELECTION1, 16, 3, 0,
@@ -494,6 +502,27 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(hw);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_MAC12] = hw;
 
+	/* RMII1 50MHz (RCLK) output enable */
+	hw = clk_hw_register_gate(dev, "mac1rclk-gate", "mac12rclk", 0,
+			scu_g6_base + ASPEED_MAC12_CLK_DLY, 29, 0,
+			&aspeed_g6_clk_lock);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	aspeed_g6_clk_data->hws[ASPEED_CLK_GATE_MAC1RCLK] = hw;
+
+	/* RMII2 50MHz (RCLK) output enable */
+	hw = clk_hw_register_gate(dev, "mac2rclk-gate", "mac12rclk", 0,
+			scu_g6_base + ASPEED_MAC12_CLK_DLY, 30, 0,
+			&aspeed_g6_clk_lock);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	aspeed_g6_clk_data->hws[ASPEED_CLK_GATE_MAC2RCLK] = hw;
+
+	/* MAC1/2 RMII 50MHz RCLK */
+	hw = clk_hw_register_fixed_rate(dev, "mac34rclk", "hclk", 0, 50000000);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
 	/* MAC3/4 AHB bus clock divider */
 	hw = clk_hw_register_divider_table(dev, "mac34", "hpll", 0,
 			scu_g6_base + 0x310, 24, 3, 0,
@@ -503,6 +532,22 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(hw);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_MAC34] = hw;
 
+	/* RMII3 50MHz (RCLK) output enable */
+	hw = clk_hw_register_gate(dev, "mac3rclk-gate", "mac34rclk", 0,
+			scu_g6_base + ASPEED_MAC34_CLK_DLY, 29, 0,
+			&aspeed_g6_clk_lock);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	aspeed_g6_clk_data->hws[ASPEED_CLK_GATE_MAC3RCLK] = hw;
+
+	/* RMII4 50MHz (RCLK) output enable */
+	hw = clk_hw_register_gate(dev, "mac4rclk-gate", "mac34rclk", 0,
+			scu_g6_base + ASPEED_MAC34_CLK_DLY, 30, 0,
+			&aspeed_g6_clk_lock);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	aspeed_g6_clk_data->hws[ASPEED_CLK_GATE_MAC4RCLK] = hw;
+
 	/* LPC Host (LHCLK) clock divider */
 	hw = clk_hw_register_divider_table(dev, "lhclk", "hpll", 0,
 			scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0,
-- 
2.20.1


  parent reply	other threads:[~2019-10-08 11:35 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-08 11:35 [PATCH 0/2] clk: ast2600: Expose RMII RCLK for MACs 1-4 Andrew Jeffery
2019-10-08 11:35 ` [PATCH 1/2] dt-bindings: clock: Add AST2600 RMII RCLK gate definitions Andrew Jeffery
2019-10-08 12:45   ` Joel Stanley
2019-10-08 11:35 ` Andrew Jeffery [this message]
2019-10-08 12:39   ` [PATCH 2/2] clk: ast2600: Add RMII RCLK gates for all four MACs Joel Stanley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191008113553.13662-3-andrew@aj.id.au \
    --to=andrew@aj.id.au \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).