[PATCH v2 0/4] clk: renesas: Add r8a77961 support

[PATCH v2 0/4] clk: renesas: Add r8a77961 support

[Geert Uytterhoeven]

	Hi all,

This patch series adds support for the Clock Pulse Generator / Module
Standby and Software Reset block in the Renesas R-Car M3-W+ (R8A77961)
SoC.  As R-Car M3-W+ is very similar to R-Car M3-W (R8A77960), the
existing driver for R-Car M3-W is updated to handle both.

To avoid confusion between R-Car M3-W and M3-W+, the existing config
symbol for M3-W is renamed to CLK_R8A77960 in a dependency-free way, and
references to r8a7796 are updated.

Changes compared to v1[1]:
  - Split in per-subsystem series,
  - Add Reviewed-by, Tested-by,
  - Rename CLK_R8A7796,
  - Update r8a7796 references,

I intend to queue this series in clk-renesas-for-v5.5.
The second patch will be put on a branch shared between driver and DTS.

Thanks for your comments!

[1] "[PATCH/RFC 00/19] arm64: dts: renesas: Initial support for R-Car M3-W+"
    https://lore.kernel.org/linux-renesas-soc/20191007102332.12196-1-geert+renesas@glider.be/

Geert Uytterhoeven (4):
  dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support
  dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions
  clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960
  clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support

 .../bindings/clock/renesas,cpg-mssr.txt       | 11 ++--
 drivers/clk/renesas/Kconfig                   |  9 ++-
 drivers/clk/renesas/Makefile                  |  3 +-
 drivers/clk/renesas/r8a7796-cpg-mssr.c        | 24 +++++--
 drivers/clk/renesas/renesas-cpg-mssr.c        |  8 ++-
 include/dt-bindings/clock/r8a77961-cpg-mssr.h | 65 +++++++++++++++++++
 6 files changed, 107 insertions(+), 13 deletions(-)
 create mode 100644 include/dt-bindings/clock/r8a77961-cpg-mssr.h

-- 
2.17.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

[PATCH v2 1/4] dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support

[Geert Uytterhoeven]

Add DT binding documentation for the Clock Pulse Generator / Module
Standby and Software Reset block in the Renesas R-Car M3-W+ (R8A77961)
SoC.

Update all references to R-Car M3-W from "r8a7796" to "r8a77960", to
avoid confusion between R-Car M3-W (R8A77960) and M3-W+.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
v2:
  - Add Reviewed-by,
  - Update R-Car M3-W references.
---
 .../devicetree/bindings/clock/renesas,cpg-mssr.txt    | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
index b5edebeb12b40638..d67f57e0dfd22fbe 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -27,7 +27,8 @@ Required Properties:
       - "renesas,r8a7793-cpg-mssr" for the r8a7793 SoC (R-Car M2-N)
       - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2)
       - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
-      - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
+      - "renesas,r8a7796-cpg-mssr" for the r8a77960 SoC (R-Car M3-W)
+      - "renesas,r8a77961-cpg-mssr" for the r8a77961 SoC (R-Car M3-W+)
       - "renesas,r8a77965-cpg-mssr" for the r8a77965 SoC (R-Car M3-N)
       - "renesas,r8a77970-cpg-mssr" for the r8a77970 SoC (R-Car V3M)
       - "renesas,r8a77980-cpg-mssr" for the r8a77980 SoC (R-Car V3H)
@@ -42,10 +43,10 @@ Required Properties:
   - clock-names: List of external parent clock names. Valid names are:
       - "extal" (r7s9210, r8a7743, r8a7744, r8a7745, r8a77470, r8a774a1,
 		 r8a774b1, r8a774c0, r8a7790, r8a7791, r8a7792, r8a7793,
-		 r8a7794, r8a7795, r8a7796, r8a77965, r8a77970, r8a77980,
-		 r8a77990, r8a77995)
-      - "extalr" (r8a774a1, r8a774b1, r8a7795, r8a7796, r8a77965, r8a77970,
-		  r8a77980)
+		 r8a7794, r8a7795, r8a77960, r8a77961, r8a77965, r8a77970,
+		 r8a77980, r8a77990, r8a77995)
+      - "extalr" (r8a774a1, r8a774b1, r8a7795, r8a77960, r8a77961, r8a77965,
+		  r8a77970, r8a77980)
       - "usb_extal" (r8a7743, r8a7744, r8a7745, r8a77470, r8a7790, r8a7791,
 		     r8a7793, r8a7794)
 
-- 
2.17.1

[PATCH v2 2/4] dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions

[Geert Uytterhoeven]

Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car
M3-W+ (R8A77961) SoC, as listed in Table 8.2b ("List of Clocks [R-Car
M3-W/R-Car M3-W+]") of the R-Car Series, 3rd Generation Hardware User's
Manual (Rev. 2.00, Jul. 31, 2019).  A gap is added for CSIREF, to
preserve compatibility with the definitions for R-Car M3-W (R8A77960).

Note that internal CPG clocks (S0, S1, S2, S3, SDSRC, SSPSRC, and POST2)
are not included, as they are used as internal clock sources only, and
never referenced from DT.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
v2:
  - Add Reviewed-by.
---
 include/dt-bindings/clock/r8a77961-cpg-mssr.h | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 include/dt-bindings/clock/r8a77961-cpg-mssr.h

diff --git a/include/dt-bindings/clock/r8a77961-cpg-mssr.h b/include/dt-bindings/clock/r8a77961-cpg-mssr.h
new file mode 100644
index 0000000000000000..7921d785546d12ce
--- /dev/null
+++ b/include/dt-bindings/clock/r8a77961-cpg-mssr.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R8A77961_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_R8A77961_CPG_MSSR_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* r8a77961 CPG Core Clocks */
+#define R8A77961_CLK_Z			0
+#define R8A77961_CLK_Z2			1
+#define R8A77961_CLK_ZR			2
+#define R8A77961_CLK_ZG			3
+#define R8A77961_CLK_ZTR			4
+#define R8A77961_CLK_ZTRD2		5
+#define R8A77961_CLK_ZT			6
+#define R8A77961_CLK_ZX			7
+#define R8A77961_CLK_S0D1		8
+#define R8A77961_CLK_S0D2		9
+#define R8A77961_CLK_S0D3		10
+#define R8A77961_CLK_S0D4		11
+#define R8A77961_CLK_S0D6		12
+#define R8A77961_CLK_S0D8		13
+#define R8A77961_CLK_S0D12		14
+#define R8A77961_CLK_S1D1		15
+#define R8A77961_CLK_S1D2		16
+#define R8A77961_CLK_S1D4		17
+#define R8A77961_CLK_S2D1		18
+#define R8A77961_CLK_S2D2		19
+#define R8A77961_CLK_S2D4		20
+#define R8A77961_CLK_S3D1		21
+#define R8A77961_CLK_S3D2		22
+#define R8A77961_CLK_S3D4		23
+#define R8A77961_CLK_LB			24
+#define R8A77961_CLK_CL			25
+#define R8A77961_CLK_ZB3			26
+#define R8A77961_CLK_ZB3D2		27
+#define R8A77961_CLK_ZB3D4		28
+#define R8A77961_CLK_CR			29
+#define R8A77961_CLK_CRD2		30
+#define R8A77961_CLK_SD0H		31
+#define R8A77961_CLK_SD0			32
+#define R8A77961_CLK_SD1H		33
+#define R8A77961_CLK_SD1			34
+#define R8A77961_CLK_SD2H		35
+#define R8A77961_CLK_SD2			36
+#define R8A77961_CLK_SD3H		37
+#define R8A77961_CLK_SD3			38
+#define R8A77961_CLK_SSP2		39
+#define R8A77961_CLK_SSP1		40
+#define R8A77961_CLK_SSPRS		41
+#define R8A77961_CLK_RPC			42
+#define R8A77961_CLK_RPCD2		43
+#define R8A77961_CLK_MSO			44
+#define R8A77961_CLK_CANFD		45
+#define R8A77961_CLK_HDMI		46
+#define R8A77961_CLK_CSI0		47
+/* CLK_CSIREF was removed */
+#define R8A77961_CLK_CP			49
+#define R8A77961_CLK_CPEX		50
+#define R8A77961_CLK_R			51
+#define R8A77961_CLK_OSC			52
+
+#endif /* __DT_BINDINGS_CLOCK_R8A77961_CPG_MSSR_H__ */
-- 
2.17.1

[PATCH v2 3/4] clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960

[Geert Uytterhoeven]

Rename CONFIG_CLK_R8A7796 for R-Car M3-W (R8A77960) to
CONFIG_CLK_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961),
which will use CONFIG_CLK_R8A77961.

Extend the dependency of CONFIG_CLK_R8A77960 from CONFIG_ARCH_R8A7796 to
CONFIG_ARCH_R8A77960, to relax dependencies for a future rename of the
SoC configuration symbol.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - New.
---
 drivers/clk/renesas/Kconfig            | 4 ++--
 drivers/clk/renesas/Makefile           | 2 +-
 drivers/clk/renesas/renesas-cpg-mssr.c | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index be03bb74801252bc..a48f75ec1400c090 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -21,7 +21,7 @@ config CLK_RENESAS
 	select CLK_R8A7792 if ARCH_R8A7792
 	select CLK_R8A7794 if ARCH_R8A7794
 	select CLK_R8A7795 if ARCH_R8A7795
-	select CLK_R8A7796 if ARCH_R8A7796
+	select CLK_R8A77960 if ARCH_R8A77960 || ARCH_R8A7796
 	select CLK_R8A77965 if ARCH_R8A77965
 	select CLK_R8A77970 if ARCH_R8A77970
 	select CLK_R8A77980 if ARCH_R8A77980
@@ -109,7 +109,7 @@ config CLK_R8A7795
 	bool "R-Car H3 clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN3_CPG
 
-config CLK_R8A7796
+config CLK_R8A77960
 	bool "R-Car M3-W clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN3_CPG
 
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index ef0fdd00d2b741b2..58211d0f04bf4d4b 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_CLK_R8A7791)		+= r8a7791-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A7792)		+= r8a7792-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A7794)		+= r8a7794-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A7795)		+= r8a7795-cpg-mssr.o
-obj-$(CONFIG_CLK_R8A7796)		+= r8a7796-cpg-mssr.o
+obj-$(CONFIG_CLK_R8A77960)		+= r8a7796-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A77965)		+= r8a77965-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A77970)		+= r8a77970-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A77980)		+= r8a77980-cpg-mssr.o
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c
index 35966678148e2c8b..c2f96e63498e14cc 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.c
+++ b/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -749,7 +749,7 @@ static const struct of_device_id cpg_mssr_match[] = {
 		.data = &r8a7795_cpg_mssr_info,
 	},
 #endif
-#ifdef CONFIG_CLK_R8A7796
+#ifdef CONFIG_CLK_R8A77960
 	{
 		.compatible = "renesas,r8a7796-cpg-mssr",
 		.data = &r8a7796_cpg_mssr_info,
-- 
2.17.1

[PATCH v2 4/4] clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support

[Geert Uytterhoeven]

Add support for the R-Car M3-W+ (R8A77961) SoC to the Renesas Clock
Pulse Generator / Module Standby and Software Reset driver.

R-Car M3-W+ is very similar to R-Car M3-W (R8A77960), which allows for
both SoCs to share a driver.  R-Car M3-W+ lacks a few modules, so their
clocks must be nullified.

Based on a patch in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
v2:
  - Add Reviewed-by, Tested-by,
  - Add "R-Car M3-W/W+" comment at the top of r8a7796-cpg-mssr.c.
---
 drivers/clk/renesas/Kconfig            |  5 +++++
 drivers/clk/renesas/Makefile           |  1 +
 drivers/clk/renesas/r8a7796-cpg-mssr.c | 24 ++++++++++++++++++++----
 drivers/clk/renesas/renesas-cpg-mssr.c |  6 ++++++
 4 files changed, 32 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index a48f75ec1400c090..4cd846bc98cc2ec0 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -22,6 +22,7 @@ config CLK_RENESAS
 	select CLK_R8A7794 if ARCH_R8A7794
 	select CLK_R8A7795 if ARCH_R8A7795
 	select CLK_R8A77960 if ARCH_R8A77960 || ARCH_R8A7796
+	select CLK_R8A77961 if ARCH_R8A77961
 	select CLK_R8A77965 if ARCH_R8A77965
 	select CLK_R8A77970 if ARCH_R8A77970
 	select CLK_R8A77980 if ARCH_R8A77980
@@ -113,6 +114,10 @@ config CLK_R8A77960
 	bool "R-Car M3-W clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN3_CPG
 
+config CLK_R8A77961
+	bool "R-Car M3-W+ clock support" if COMPILE_TEST
+	select CLK_RCAR_GEN3_CPG
+
 config CLK_R8A77965
 	bool "R-Car M3-N clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN3_CPG
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index 58211d0f04bf4d4b..4a722bc5aac755c8 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_CLK_R8A7792)		+= r8a7792-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A7794)		+= r8a7794-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A7795)		+= r8a7795-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A77960)		+= r8a7796-cpg-mssr.o
+obj-$(CONFIG_CLK_R8A77961)		+= r8a7796-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A77965)		+= r8a77965-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A77970)		+= r8a77970-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A77980)		+= r8a77980-cpg-mssr.o
diff --git a/drivers/clk/renesas/r8a7796-cpg-mssr.c b/drivers/clk/renesas/r8a7796-cpg-mssr.c
index 90cc6a1026028fa8..e8420d3ada94ca45 100644
--- a/drivers/clk/renesas/r8a7796-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7796-cpg-mssr.c
@@ -1,9 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * r8a7796 Clock Pulse Generator / Module Standby and Software Reset
+ * r8a7796 (R-Car M3-W/W+) Clock Pulse Generator / Module Standby and Software
+ * Reset
  *
- * Copyright (C) 2016 Glider bvba
- * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2016-2019 Glider bvba
+ * Copyright (C) 2018-2019 Renesas Electronics Corp.
  *
  * Based on r8a7795-cpg-mssr.c
  *
@@ -14,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/of.h>
 #include <linux/soc/renesas/rcar-rst.h>
 
 #include <dt-bindings/clock/r8a7796-cpg-mssr.h>
@@ -116,7 +118,7 @@ static const struct cpg_core_clk r8a7796_core_clks[] __initconst = {
 	DEF_BASE("r",           R8A7796_CLK_R,     CLK_TYPE_GEN3_R, CLK_RINT),
 };
 
-static const struct mssr_mod_clk r8a7796_mod_clks[] __initconst = {
+static struct mssr_mod_clk r8a7796_mod_clks[] __initdata = {
 	DEF_MOD("fdp1-0",		 119,	R8A7796_CLK_S0D1),
 	DEF_MOD("scif5",		 202,	R8A7796_CLK_S3D4),
 	DEF_MOD("scif4",		 203,	R8A7796_CLK_S3D4),
@@ -304,6 +306,14 @@ static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[16] __initconst = {
 	{ 2,		192,	1,	192,	1,	32,	},
 };
 
+	/*
+	 * Fixups for R-Car M3-W+
+	 */
+
+static const unsigned int r8a77961_mod_nullify[] __initconst = {
+	MOD_CLK_ID(617),			/* FCPCI0  */
+};
+
 static int __init r8a7796_cpg_mssr_init(struct device *dev)
 {
 	const struct rcar_gen3_cpg_pll_config *cpg_pll_config;
@@ -320,6 +330,12 @@ static int __init r8a7796_cpg_mssr_init(struct device *dev)
 		return -EINVAL;
 	}
 
+	if (of_device_is_compatible(dev->of_node, "renesas,r8a77961-cpg-mssr"))
+		mssr_mod_nullify(r8a7796_mod_clks,
+				 ARRAY_SIZE(r8a7796_mod_clks),
+				 r8a77961_mod_nullify,
+				 ARRAY_SIZE(r8a77961_mod_nullify));
+
 	return rcar_gen3_cpg_init(cpg_pll_config, CLK_EXTALR, cpg_mode);
 }
 
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c
index c2f96e63498e14cc..a2663fbbd7a51067 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.c
+++ b/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -755,6 +755,12 @@ static const struct of_device_id cpg_mssr_match[] = {
 		.data = &r8a7796_cpg_mssr_info,
 	},
 #endif
+#ifdef CONFIG_CLK_R8A77961
+	{
+		.compatible = "renesas,r8a77961-cpg-mssr",
+		.data = &r8a7796_cpg_mssr_info,
+	},
+#endif
 #ifdef CONFIG_CLK_R8A77965
 	{
 		.compatible = "renesas,r8a77965-cpg-mssr",
-- 
2.17.1

RE: [PATCH v2 3/4] clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960

[Yoshihiro Shimoda]

Hi Geert-san,

> From: Geert Uytterhoeven, Sent: Wednesday, October 23, 2019 9:30 PM
> 
> Rename CONFIG_CLK_R8A7796 for R-Car M3-W (R8A77960) to
> CONFIG_CLK_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961),
> which will use CONFIG_CLK_R8A77961.
> 
> Extend the dependency of CONFIG_CLK_R8A77960 from CONFIG_ARCH_R8A7796 to
> CONFIG_ARCH_R8A77960, to relax dependencies for a future rename of the
> SoC configuration symbol.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thank you for the patch!

Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Best regards,
Yoshihiro Shimoda

Re: [PATCH v2 1/4] dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support

[Rob Herring]

On Wed, 23 Oct 2019 14:29:38 +0200, Geert Uytterhoeven wrote:
> Add DT binding documentation for the Clock Pulse Generator / Module
> Standby and Software Reset block in the Renesas R-Car M3-W+ (R8A77961)
> SoC.
> 
> Update all references to R-Car M3-W from "r8a7796" to "r8a77960", to
> avoid confusion between R-Car M3-W (R8A77960) and M3-W+.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> ---
> v2:
>   - Add Reviewed-by,
>   - Update R-Car M3-W references.
> ---
>  .../devicetree/bindings/clock/renesas,cpg-mssr.txt    | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 2/4] dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions

[Rob Herring]

On Wed, 23 Oct 2019 14:29:39 +0200, Geert Uytterhoeven wrote:
> Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car
> M3-W+ (R8A77961) SoC, as listed in Table 8.2b ("List of Clocks [R-Car
> M3-W/R-Car M3-W+]") of the R-Car Series, 3rd Generation Hardware User's
> Manual (Rev. 2.00, Jul. 31, 2019).  A gap is added for CSIREF, to
> preserve compatibility with the definitions for R-Car M3-W (R8A77960).
> 
> Note that internal CPG clocks (S0, S1, S2, S3, SDSRC, SSPSRC, and POST2)
> are not included, as they are used as internal clock sources only, and
> never referenced from DT.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> ---
> v2:
>   - Add Reviewed-by.
> ---
>  include/dt-bindings/clock/r8a77961-cpg-mssr.h | 65 +++++++++++++++++++
>  1 file changed, 65 insertions(+)
>  create mode 100644 include/dt-bindings/clock/r8a77961-cpg-mssr.h
> 

Reviewed-by: Rob Herring <robh@kernel.org>