[PATCH 0/5] Add clocks for Unisoc's SC9863A

[PATCH 0/5] Add clocks for Unisoc's SC9863A

[Chunyan Zhang]

Add SC9863A specific clock driver and devicetree bindings for it.

Also this patchset added support gate clock for pll which need to
wait a certain time for stable after being switched on.

Chunyan Zhang (4):
  dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC
    specific
  dt-bindings: clk: sprd: add bindings for sc9863a clock controller
  clk: sprd: Add dt-bindings include file for SC9863A
  clk: sprd: add clocks support for SC9863A

Xiaolong Zhang (1):
  clk: sprd: add gate for pll clocks

 .../clock/{sprd.txt => sprd,sc9860-clk.txt}   |    2 +-
 .../bindings/clock/sprd,sc9863a-clk.txt       |   59 +
 drivers/clk/sprd/Kconfig                      |    8 +
 drivers/clk/sprd/Makefile                     |    1 +
 drivers/clk/sprd/gate.c                       |   19 +
 drivers/clk/sprd/gate.h                       |   21 +-
 drivers/clk/sprd/sc9863a-clk.c                | 1711 +++++++++++++++++
 include/dt-bindings/clock/sprd,sc9863a-clk.h  |  353 ++++
 8 files changed, 2171 insertions(+), 3 deletions(-)
 rename Documentation/devicetree/bindings/clock/{sprd.txt => sprd,sc9860-clk.txt} (98%)
 create mode 100644 Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.txt
 create mode 100644 drivers/clk/sprd/sc9863a-clk.c
 create mode 100644 include/dt-bindings/clock/sprd,sc9863a-clk.h

-- 
2.20.1

[PATCH 1/5] clk: sprd: add gate for pll clocks

[Chunyan Zhang]

From: Xiaolong Zhang <xiaolong.zhang@unisoc.com>

Some sprd's gate clocks are used to the switch of pll, which
need to wait a certain time for stable after being enabled.

Signed-off-by: Xiaolong Zhang <xiaolong.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
---
 drivers/clk/sprd/gate.c | 19 +++++++++++++++++++
 drivers/clk/sprd/gate.h | 21 +++++++++++++++++++--
 2 files changed, 38 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/sprd/gate.c b/drivers/clk/sprd/gate.c
index f59d1936b412..d8b480f852f3 100644
--- a/drivers/clk/sprd/gate.c
+++ b/drivers/clk/sprd/gate.c
@@ -79,6 +79,17 @@ static int sprd_sc_gate_enable(struct clk_hw *hw)
 
 	return 0;
 }
+
+static int sprd_pll_sc_gate_prepare(struct clk_hw *hw)
+{
+	struct sprd_gate *sg = hw_to_sprd_gate(hw);
+
+	clk_sc_gate_toggle(sg, true);
+	udelay(sg->udelay);
+
+	return 0;
+}
+
 static int sprd_gate_is_enabled(struct clk_hw *hw)
 {
 	struct sprd_gate *sg = hw_to_sprd_gate(hw);
@@ -109,3 +120,11 @@ const struct clk_ops sprd_sc_gate_ops = {
 };
 EXPORT_SYMBOL_GPL(sprd_sc_gate_ops);
 
+#define sprd_pll_sc_gate_unprepare sprd_sc_gate_disable
+
+const struct clk_ops sprd_pll_sc_gate_ops = {
+	.unprepare	= sprd_pll_sc_gate_unprepare,
+	.prepare	= sprd_pll_sc_gate_prepare,
+	.is_enabled	= sprd_gate_is_enabled,
+};
+EXPORT_SYMBOL_GPL(sprd_pll_sc_gate_ops);
diff --git a/drivers/clk/sprd/gate.h b/drivers/clk/sprd/gate.h
index dc352ea55e1f..598ce607ca0a 100644
--- a/drivers/clk/sprd/gate.h
+++ b/drivers/clk/sprd/gate.h
@@ -14,16 +14,19 @@ struct sprd_gate {
 	u32			enable_mask;
 	u16			flags;
 	u16			sc_offset;
+	u32			udelay;
 
 	struct sprd_clk_common	common;
 };
 
-#define SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, _sc_offset,	\
-			     _enable_mask, _flags, _gate_flags, _ops)	\
+#define SPRD_SC_GATE_CLK_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				    _sc_offset, _enable_mask, _flags,	\
+				    _gate_flags, _udelay, _ops)		\
 	struct sprd_gate _struct = {					\
 		.enable_mask	= _enable_mask,				\
 		.sc_offset	= _sc_offset,				\
 		.flags		= _gate_flags,				\
+		.udelay		= _udelay,				\
 		.common	= {						\
 			.regmap		= NULL,				\
 			.reg		= _reg,				\
@@ -34,6 +37,12 @@ struct sprd_gate {
 		}							\
 	}
 
+#define SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, _sc_offset,	\
+			     _enable_mask, _flags, _gate_flags, _ops)	\
+	SPRD_SC_GATE_CLK_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				    _sc_offset, _enable_mask, _flags,	\
+				    _gate_flags, 0, _ops)
+
 #define SPRD_GATE_CLK(_struct, _name, _parent, _reg,			\
 		      _enable_mask, _flags, _gate_flags)		\
 	SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, 0,		\
@@ -46,6 +55,13 @@ struct sprd_gate {
 			     _enable_mask, _flags, _gate_flags,		\
 			     &sprd_sc_gate_ops)
 
+#define SPRD_PLL_SC_GATE_CLK(_struct, _name, _parent, _reg, _sc_offset,	\
+			    _enable_mask, _flags, _gate_flags, _udelay)	\
+	SPRD_SC_GATE_CLK_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				    _sc_offset,	_enable_mask, _flags,	\
+				    _gate_flags, _udelay,		\
+				    &sprd_pll_sc_gate_ops)
+
 static inline struct sprd_gate *hw_to_sprd_gate(const struct clk_hw *hw)
 {
 	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
@@ -55,5 +71,6 @@ static inline struct sprd_gate *hw_to_sprd_gate(const struct clk_hw *hw)
 
 extern const struct clk_ops sprd_gate_ops;
 extern const struct clk_ops sprd_sc_gate_ops;
+extern const struct clk_ops sprd_pll_sc_gate_ops;
 
 #endif /* _SPRD_GATE_H_ */
-- 
2.20.1

Re: [PATCH 1/5] clk: sprd: add gate for pll clocks

[Stephen Boyd]

Quoting Chunyan Zhang (2019-10-25 04:13:34)
> diff --git a/drivers/clk/sprd/gate.c b/drivers/clk/sprd/gate.c
> index f59d1936b412..d8b480f852f3 100644
> --- a/drivers/clk/sprd/gate.c
> +++ b/drivers/clk/sprd/gate.c
> @@ -109,3 +120,11 @@ const struct clk_ops sprd_sc_gate_ops = {
>  };
>  EXPORT_SYMBOL_GPL(sprd_sc_gate_ops);
>  
> +#define sprd_pll_sc_gate_unprepare sprd_sc_gate_disable

Why is there a redefine? Just use the function where it is.

> +
> +const struct clk_ops sprd_pll_sc_gate_ops = {
> +       .unprepare      = sprd_pll_sc_gate_unprepare,
> +       .prepare        = sprd_pll_sc_gate_prepare,
> +       .is_enabled     = sprd_gate_is_enabled,
> +};
> +EXPORT_SYMBOL_GPL(sprd_pll_sc_gate_ops);
> diff --git a/drivers/clk/sprd/gate.h b/drivers/clk/sprd/gate.h
> index dc352ea55e1f..598ce607ca0a 100644
> --- a/drivers/clk/sprd/gate.h
> +++ b/drivers/clk/sprd/gate.h
> @@ -14,16 +14,19 @@ struct sprd_gate {
>         u32                     enable_mask;
>         u16                     flags;
>         u16                     sc_offset;
> +       u32                     udelay;

Does the delay need to be 32 bits wide? Maybe a u8 or u16 will work?
Otherwise, make it an unsigned long please because the bit width doesn't
matter.

[PATCH 2/5] dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific

[Chunyan Zhang]

Only SC9860 clocks were described in sprd.txt, rename it with a SoC
specific name, so that we can add more SoC support.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
---
 .../devicetree/bindings/clock/{sprd.txt => sprd,sc9860-clk.txt} | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
 rename Documentation/devicetree/bindings/clock/{sprd.txt => sprd,sc9860-clk.txt} (98%)

diff --git a/Documentation/devicetree/bindings/clock/sprd.txt b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt
similarity index 98%
rename from Documentation/devicetree/bindings/clock/sprd.txt
rename to Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt
index e9d179e882d9..aaaf02ca2a6a 100644
--- a/Documentation/devicetree/bindings/clock/sprd.txt
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt
@@ -1,4 +1,4 @@
-Spreadtrum Clock Binding
+Spreadtrum SC9860 Clock Binding
 ------------------------
 
 Required properties:
-- 
2.20.1

Re: [PATCH 2/5] dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific

[Rob Herring]

On Fri, 25 Oct 2019 19:13:35 +0800, Chunyan Zhang wrote:
> 
> Only SC9860 clocks were described in sprd.txt, rename it with a SoC
> specific name, so that we can add more SoC support.
> 
> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
> ---
>  .../devicetree/bindings/clock/{sprd.txt => sprd,sc9860-clk.txt} | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>  rename Documentation/devicetree/bindings/clock/{sprd.txt => sprd,sc9860-clk.txt} (98%)
> 

Acked-by: Rob Herring <robh@kernel.org>

[PATCH 3/5] dt-bindings: clk: sprd: add bindings for sc9863a clock controller

[Chunyan Zhang]

add a new bindings to describe sc9863a clock compatible string.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
---
 .../bindings/clock/sprd,sc9863a-clk.txt       | 59 +++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.txt

diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.txt b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.txt
new file mode 100644
index 000000000000..a73ae5574c82
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.txt
@@ -0,0 +1,59 @@
+Unisoc SC9863A Clock Binding
+------------------------
+
+Required properties:
+- compatible: should contain the following compatible strings:
+	- "sprd,sc9863a-ap-clk"
+	- "sprd,sc9863a-pmu-gate"
+	- "sprd,sc9863a-pll"
+	- "sprd,sc9863a-mpll"
+	- "sprd,sc9863a-rpll"
+	- "sprd,sc9863a-dpll"
+	- "sprd,sc9863a-aon-clk"
+	- "sprd,sc9863a-apahb-gate"
+	- "sprd,sc9863a-aonapb-gate"
+	- "sprd,sc9863a-mm-gate"
+	- "sprd,sc9863a-mm-clk"
+	- "sprd,sc9863a-vspahb-gate"
+	- "sprd,sc9863a-apapb-gate"
+
+- #clock-cells: must be 1
+
+- clocks : Should be the input parent clock(s) phandle for the clock, this
+	   property here just simply shows which clock group the clocks'
+	   parents are in, since each clk node would represent many clocks
+	   which are defined in the driver.  The detailed dependency
+	   relationship (i.e. how many parents and which are the parents)
+	   are implemented in driver code.
+
+Optional properties:
+
+- reg:	Contain the registers base address and length. It must be configured
+	only if no 'sprd,syscon' under the node.
+
+- sprd,syscon: phandle to the syscon which is in the same address area with
+	       the clock, and so we can get regmap for the clocks from the
+	       syscon device.
+
+Example:
+	ap_clk: clock-controller@21500000 {
+		compatible = "sprd,sc9863a-ap-clk";
+		reg = <0 0x21500000 0 0x1000>;
+		clocks = <&ext_32k>, <&ext_26m>,
+			 <&pll 0>, <&rpll 0>;
+		#clock-cells = <1>;
+	};
+
+	pmu_gate: pmu-gate {
+		compatible = "sprd,sc9863a-pmu-gate";
+		sprd,syscon = <&pmu_regs>; /* 0x402b0000 */
+		clocks = <&ext_26m>;
+		#clock-cells = <1>;
+	};
+
+	pll: pll {
+		compatible = "sprd,sc9863a-pll";
+		sprd,syscon = <&anlg_phy_g2_regs>; /* 0x40353000 */
+		clocks = <&pmu_gate 0>;
+		#clock-cells = <1>;
+	};
-- 
2.20.1

Re: [PATCH 3/5] dt-bindings: clk: sprd: add bindings for sc9863a clock controller

[Rob Herring]

On Fri, Oct 25, 2019 at 07:13:36PM +0800, Chunyan Zhang wrote:
> 
> add a new bindings to describe sc9863a clock compatible string.
> 
> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
> ---
>  .../bindings/clock/sprd,sc9863a-clk.txt       | 59 +++++++++++++++++++
>  1 file changed, 59 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.txt

Please make this a DT schema.

> diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.txt b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.txt
> new file mode 100644
> index 000000000000..a73ae5574c82
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.txt
> @@ -0,0 +1,59 @@
> +Unisoc SC9863A Clock Binding
> +------------------------
> +
> +Required properties:
> +- compatible: should contain the following compatible strings:
> +	- "sprd,sc9863a-ap-clk"
> +	- "sprd,sc9863a-pmu-gate"
> +	- "sprd,sc9863a-pll"
> +	- "sprd,sc9863a-mpll"
> +	- "sprd,sc9863a-rpll"
> +	- "sprd,sc9863a-dpll"
> +	- "sprd,sc9863a-aon-clk"
> +	- "sprd,sc9863a-apahb-gate"
> +	- "sprd,sc9863a-aonapb-gate"
> +	- "sprd,sc9863a-mm-gate"
> +	- "sprd,sc9863a-mm-clk"
> +	- "sprd,sc9863a-vspahb-gate"
> +	- "sprd,sc9863a-apapb-gate"
> +
> +- #clock-cells: must be 1
> +
> +- clocks : Should be the input parent clock(s) phandle for the clock, this
> +	   property here just simply shows which clock group the clocks'
> +	   parents are in, since each clk node would represent many clocks
> +	   which are defined in the driver.  The detailed dependency
> +	   relationship (i.e. how many parents and which are the parents)
> +	   are implemented in driver code.

You need to define how many clocks for each block.

> +
> +Optional properties:
> +
> +- reg:	Contain the registers base address and length. It must be configured
> +	only if no 'sprd,syscon' under the node.
> +
> +- sprd,syscon: phandle to the syscon which is in the same address area with
> +	       the clock, and so we can get regmap for the clocks from the
> +	       syscon device.

Can't these be child nodes of the syscon instead?

> +
> +Example:
> +	ap_clk: clock-controller@21500000 {
> +		compatible = "sprd,sc9863a-ap-clk";
> +		reg = <0 0x21500000 0 0x1000>;
> +		clocks = <&ext_32k>, <&ext_26m>,
> +			 <&pll 0>, <&rpll 0>;
> +		#clock-cells = <1>;
> +	};
> +
> +	pmu_gate: pmu-gate {
> +		compatible = "sprd,sc9863a-pmu-gate";
> +		sprd,syscon = <&pmu_regs>; /* 0x402b0000 */
> +		clocks = <&ext_26m>;
> +		#clock-cells = <1>;
> +	};
> +
> +	pll: pll {
> +		compatible = "sprd,sc9863a-pll";
> +		sprd,syscon = <&anlg_phy_g2_regs>; /* 0x40353000 */
> +		clocks = <&pmu_gate 0>;
> +		#clock-cells = <1>;
> +	};
> -- 
> 2.20.1
> 
> 

[PATCH 4/5] clk: sprd: Add dt-bindings include file for SC9863A

[Chunyan Zhang]

This file defines all SC9863A clock indexes, it should be included in the
device tree in which there's device using the clocks.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
---
 include/dt-bindings/clock/sprd,sc9863a-clk.h | 353 +++++++++++++++++++
 1 file changed, 353 insertions(+)
 create mode 100644 include/dt-bindings/clock/sprd,sc9863a-clk.h

diff --git a/include/dt-bindings/clock/sprd,sc9863a-clk.h b/include/dt-bindings/clock/sprd,sc9863a-clk.h
new file mode 100644
index 000000000000..bb57312441c7
--- /dev/null
+++ b/include/dt-bindings/clock/sprd,sc9863a-clk.h
@@ -0,0 +1,353 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Unisoc SC9863A platform clocks
+ *
+ * Copyright (C) 2019, Unisoc Communications Inc.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SC9860_H_
+#define _DT_BINDINGS_CLK_SC9860_H_
+
+#define	CLK_MPLL0_GATE		0
+#define	CLK_DPLL0_GATE		1
+#define	CLK_LPLL_GATE		2
+#define	CLK_GPLL_GATE		3
+#define	CLK_DPLL1_GATE		4
+#define	CLK_MPLL1_GATE		5
+#define	CLK_MPLL2_GATE		6
+#define CLK_ISPPLL_GATE		7
+#define	CLK_PMU_APB_NUM		(CLK_ISPPLL_GATE + 1)
+
+#define	CLK_AUDIO_GATE		0
+#define CLK_RPLL		1
+#define CLK_RPLL_390M		2
+#define CLK_RPLL_260M		3
+#define CLK_RPLL_195M		4
+#define CLK_RPLL_26M		5
+#define CLK_ANLG_PHY_G5_NUM	(CLK_RPLL_26M + 1)
+
+#define CLK_TWPLL		0
+#define CLK_TWPLL_768M		1
+#define CLK_TWPLL_384M		2
+#define CLK_TWPLL_192M		3
+#define CLK_TWPLL_96M		4
+#define CLK_TWPLL_48M		5
+#define CLK_TWPLL_24M		6
+#define CLK_TWPLL_12M		7
+#define CLK_TWPLL_512M		8
+#define CLK_TWPLL_256M		9
+#define CLK_TWPLL_128M		10
+#define CLK_TWPLL_64M		11
+#define CLK_TWPLL_307M2		12
+#define CLK_TWPLL_219M4		13
+#define CLK_TWPLL_170M6		14
+#define CLK_TWPLL_153M6		15
+#define CLK_TWPLL_76M8		16
+#define CLK_TWPLL_51M2		17
+#define CLK_TWPLL_38M4		18
+#define CLK_TWPLL_19M2		19
+#define CLK_LPLL		20
+#define CLK_LPLL_409M6		21
+#define CLK_LPLL_245M76		22
+#define CLK_GPLL		23
+#define CLK_ISPPLL		24
+#define CLK_ISPPLL_468M		25
+#define CLK_ANLG_PHY_G1_NUM	(CLK_ISPPLL_468M + 1)
+
+#define CLK_DPLL0		0
+#define CLK_DPLL1		1
+#define CLK_DPLL0_933M		2
+#define	CLK_DPLL0_622M3		3
+#define CLK_DPLL0_400M		4
+#define CLK_DPLL0_266M7		5
+#define CLK_DPLL0_123M1		6
+#define CLK_DPLL0_50M		7
+#define CLK_ANLG_PHY_G7_NUM	(CLK_DPLL0_50M + 1)
+
+#define CLK_MPLL0		0
+#define CLK_MPLL1		1
+#define CLK_MPLL2		2
+#define CLK_MPLL2_675M		3
+#define CLK_ANLG_PHY_G4_NUM	(CLK_MPLL2_675M + 1)
+
+#define CLK_AP_APB		0
+#define CLK_AP_CE		1
+#define CLK_NANDC_ECC		2
+#define CLK_NANDC_26M		3
+#define CLK_EMMC_32K		4
+#define CLK_SDIO0_32K		5
+#define CLK_SDIO1_32K		6
+#define CLK_SDIO2_32K		7
+#define CLK_OTG_UTMI		8
+#define CLK_AP_UART0		9
+#define CLK_AP_UART1		10
+#define CLK_AP_UART2		11
+#define CLK_AP_UART3		12
+#define CLK_AP_UART4		13
+#define CLK_AP_I2C0		14
+#define CLK_AP_I2C1		15
+#define CLK_AP_I2C2		16
+#define CLK_AP_I2C3		17
+#define CLK_AP_I2C4		18
+#define CLK_AP_I2C5		19
+#define CLK_AP_I2C6		20
+#define CLK_AP_SPI0		21
+#define CLK_AP_SPI1		22
+#define CLK_AP_SPI2		23
+#define CLK_AP_SPI3		24
+#define CLK_AP_IIS0		25
+#define CLK_AP_IIS1		26
+#define CLK_AP_IIS2		27
+#define CLK_SIM0		28
+#define CLK_SIM0_32K		29
+#define CLK_AP_CLK_NUM		(CLK_SIM0_32K + 1)
+
+#define CLK_13M			0
+#define CLK_6M5			1
+#define CLK_4M3			2
+#define CLK_2M			3
+#define CLK_250K		4
+#define CLK_RCO_25M		5
+#define CLK_RCO_4M		6
+#define CLK_RCO_2M		7
+#define CLK_EMC			8
+#define CLK_AON_APB		9
+#define CLK_ADI			10
+#define CLK_AUX0		11
+#define CLK_AUX1		12
+#define CLK_AUX2		13
+#define CLK_PROBE		14
+#define CLK_PWM0		15
+#define CLK_PWM1		16
+#define CLK_PWM2		17
+#define CLK_AON_THM		18
+#define CLK_AUDIF		19
+#define CLK_CPU_DAP		20
+#define CLK_CPU_TS		21
+#define CLK_DJTAG_TCK		22
+#define CLK_EMC_REF		23
+#define CLK_CSSYS		24
+#define CLK_AON_PMU		25
+#define CLK_PMU_26M		26
+#define CLK_AON_TMR		27
+#define CLK_POWER_CPU		28
+#define CLK_AP_AXI		29
+#define CLK_SDIO0_2X		30
+#define CLK_SDIO1_2X		31
+#define CLK_SDIO2_2X		32
+#define CLK_EMMC_2X		33
+#define CLK_DPU			34
+#define CLK_DPU_DPI		35
+#define CLK_OTG_REF		36
+#define CLK_SDPHY_APB		37
+#define CLK_ALG_IO_APB		38
+#define CLK_GPU_CORE		39
+#define CLK_GPU_SOC		40
+#define CLK_MM_EMC		41
+#define CLK_MM_AHB		42
+#define CLK_BPC			43
+#define CLK_DCAM_IF		44
+#define CLK_ISP			45
+#define CLK_JPG			46
+#define CLK_CPP			47
+#define CLK_SENSOR0		48
+#define CLK_SENSOR1		49
+#define CLK_SENSOR2		50
+#define CLK_MM_VEMC		51
+#define CLK_MM_VAHB		52
+#define CLK_VSP			53
+#define CLK_CORE0		54
+#define CLK_CORE1		55
+#define CLK_CORE2		56
+#define CLK_CORE3		57
+#define CLK_CORE4		58
+#define CLK_CORE5		59
+#define CLK_CORE6		60
+#define CLK_CORE7		61
+#define CLK_SCU			62
+#define CLK_ACE			63
+#define CLK_AXI_PERIPH		64
+#define CLK_AXI_ACP		65
+#define CLK_ATB			66
+#define CLK_DEBUG_APB		67
+#define CLK_GIC			68
+#define CLK_PERIPH		69
+#define CLK_AON_CLK_NUM		(CLK_VSP + 1)
+
+#define CLK_OTG_EB		0
+#define CLK_DMA_EB		1
+#define CLK_CE_EB		2
+#define CLK_NANDC_EB		3
+#define CLK_SDIO0_EB		4
+#define CLK_SDIO1_EB		5
+#define CLK_SDIO2_EB		6
+#define CLK_EMMC_EB		7
+#define CLK_EMMC_32K_EB		8
+#define CLK_SDIO0_32K_EB	9
+#define CLK_SDIO1_32K_EB	10
+#define CLK_SDIO2_32K_EB	11
+#define CLK_NANDC_26M_EB	12
+#define CLK_DMA_EB2		13
+#define CLK_CE_EB2		14
+#define CLK_AP_AHB_GATE_NUM	(CLK_CE_EB2 + 1)
+
+#define CLK_ADC_EB		0
+#define CLK_FM_EB		1
+#define CLK_TPC_EB		2
+#define CLK_GPIO_EB		3
+#define CLK_PWM0_EB		4
+#define CLK_PWM1_EB		5
+#define CLK_PWM2_EB		6
+#define CLK_PWM3_EB		7
+#define CLK_KPD_EB		8
+#define CLK_AON_SYST_EB		9
+#define CLK_AP_SYST_EB		10
+#define CLK_AON_TMR_EB		11
+#define CLK_AP_TMR0_EB		12
+#define CLK_EFUSE_EB		13
+#define CLK_EIC_EB		14
+#define CLK_INTC_EB		15
+#define CLK_ADI_EB		16
+#define CLK_AUDIF_EB		17
+#define CLK_AUD_EB		18
+#define CLK_VBC_EB		19
+#define CLK_PIN_EB		20
+#define CLK_IPI_EB		21
+#define CLK_SPLK_EB		22
+#define CLK_MSPI_EB		23
+#define CLK_AP_WDG_EB		24
+#define CLK_MM_EB		25
+#define CLK_AON_APB_CKG_EB	26
+#define CLK_CA53_TS0_EB		27
+#define CLK_CA53_TS1_EB		28
+#define CLK_CS53_DAP_EB		29
+#define CLK_I2C_EB		30
+#define CLK_PMU_EB		31
+#define CLK_THM_EB		32
+#define CLK_AUX0_EB		33
+#define CLK_AUX1_EB		34
+#define CLK_AUX2_EB		35
+#define CLK_PROBE_EB		36
+#define CLK_EMC_REF_EB		37
+#define CLK_CA53_WDG_EB		38
+#define CLK_AP_TMR1_EB		39
+#define CLK_AP_TMR2_EB		40
+#define CLK_DISP_EMC_EB		41
+#define CLK_ZIP_EMC_EB		42
+#define CLK_GSP_EMC_EB		43
+#define CLK_MM_VSP_EB		44
+#define CLK_MDAR_EB		45
+#define CLK_RTC4M0_CAL_EB	46
+#define CLK_RTC4M1_CAL_EB	47
+#define CLK_DJTAG_EB		48
+#define CLK_MBOX_EB		49
+#define CLK_AON_DMA_EB		50
+#define CLK_AON_APB_DEF_EB	51
+#define CLK_ORP_JTAG_EB		52
+#define CLK_DBG_EB		53
+#define CLK_DBG_EMC_EB		54
+#define CLK_CROSS_TRIG_EB	55
+#define CLK_SERDES_DPHY_EB	56
+#define CLK_ARCH_RTC_EB		57
+#define CLK_KPD_RTC_EB		58
+#define CLK_AON_SYST_RTC_EB	59
+#define CLK_AP_SYST_RTC_EB	60
+#define CLK_AON_TMR_RTC_EB	61
+#define CLK_AP_TMR0_RTC_EB	62
+#define CLK_EIC_RTC_EB		63
+#define CLK_EIC_RTCDV5_EB	64
+#define CLK_AP_WDG_RTC_EB	65
+#define CLK_CA53_WDG_RTC_EB	66
+#define CLK_THM_RTC_EB		67
+#define CLK_ATHMA_RTC_EB	68
+#define CLK_GTHMA_RTC_EB	69
+#define CLK_ATHMA_RTC_A_EB	70
+#define CLK_GTHMA_RTC_A_EB	71
+#define CLK_AP_TMR1_RTC_EB	72
+#define CLK_AP_TMR2_RTC_EB	73
+#define CLK_DXCO_LC_RTC_EB	74
+#define CLK_BB_CAL_RTC_EB	75
+#define CLK_GNU_EB		76
+#define CLK_DISP_EB		77
+#define CLK_MM_EMC_EB		78
+#define CLK_POWER_CPU_EB	79
+#define CLK_HW_I2C_EB		80
+#define CLK_MM_VSP_EMC_EB	81
+#define CLK_VSP_EB		82
+#define CLK_CSSYS_EB		83
+#define CLK_DMC_EB		84
+#define CLK_ROSC_EB		85
+#define CLK_S_D_CFG_EB		86
+#define CLK_S_D_REF_EB		87
+#define CLK_B_DMA_EB		88
+#define CLK_ANLG_EB		89
+#define CLK_ANLG_APB_EB		90
+#define CLK_BSMTMR_EB		91
+#define CLK_AP_AXI_EB		92
+#define CLK_AP_INTC0_EB		93
+#define CLK_AP_INTC1_EB		94
+#define CLK_AP_INTC2_EB		95
+#define CLK_AP_INTC3_EB		96
+#define CLK_AP_INTC4_EB		97
+#define CLK_AP_INTC5_EB		98
+#define CLK_SCC_EB		99
+#define CLK_DPHY_CFG_EB		100
+#define CLK_DPHY_REF_EB		101
+#define CLK_CPHY_CFG_EB		102
+#define CLK_OTG_REF_EB		103
+#define CLK_SERDES_EB		104
+#define CLK_AON_AP_EMC_EB	105
+#define CLK_AON_APB_GATE_NUM	(CLK_AON_AP_EMC_EB + 1)
+
+#define CLK_MAHB_CKG_EB		0
+#define CLK_MDCAM_EB		1
+#define CLK_MISP_EB		2
+#define CLK_MAHBCSI_EB		3
+#define CLK_MCSI_S_EB		4
+#define CLK_MCSI_T_EB		5
+#define CLK_DCAM_AXI_EB		6
+#define CLK_ISP_AXI_EB		7
+#define CLK_MCSI_EB		8
+#define CLK_MCSI_S_CKG_EB	9
+#define CLK_MCSI_T_CKG_EB	10
+#define CLK_SENSOR0_EB		11
+#define CLK_SENSOR1_EB		12
+#define CLK_SENSOR2_EB		13
+#define CLK_MCPHY_CFG_EB	14
+#define CLK_MM_GATE_NUM		(CLK_MCPHY_CFG_EB + 1)
+
+#define CLK_MIPI_CSI		0
+#define CLK_MIPI_CSI_S		1
+#define CLK_MIPI_CSI_M		2
+#define CLK_MM_CLK_NUM		(CLK_MIPI_CSI_M + 1)
+
+#define CLK_VCKG_EB		0
+#define CLK_VVSP_EB		1
+#define CLK_VJPG_EB		2
+#define CLK_VCPP_EB		3
+#define CLK_VSP_AHB_GATE_NUM	(CLK_VCPP_EB + 1)
+
+#define CLK_SIM0_EB		0
+#define CLK_IIS0_EB		1
+#define CLK_IIS1_EB		2
+#define CLK_IIS2_EB		3
+#define CLK_SPI0_EB		4
+#define CLK_SPI1_EB		5
+#define CLK_SPI2_EB		6
+#define CLK_I2C0_EB		7
+#define CLK_I2C1_EB		8
+#define CLK_I2C2_EB		9
+#define CLK_I2C3_EB		10
+#define CLK_I2C4_EB		11
+#define CLK_UART0_EB		12
+#define CLK_UART1_EB		13
+#define CLK_UART2_EB		14
+#define CLK_UART3_EB		15
+#define CLK_UART4_EB		16
+#define CLK_SIM0_32K_EB		17
+#define CLK_SPI3_EB		18
+#define CLK_I2C5_EB		19
+#define CLK_I2C6_EB		20
+#define CLK_AP_APB_GATE_NUM	(CLK_I2C6_EB + 1)
+
+#endif /* _DT_BINDINGS_CLK_SC9860_H_ */
-- 
2.20.1

Re: [PATCH 4/5] clk: sprd: Add dt-bindings include file for SC9863A

[Rob Herring]

On Fri, Oct 25, 2019 at 07:13:37PM +0800, Chunyan Zhang wrote:
> 
> This file defines all SC9863A clock indexes, it should be included in the
> device tree in which there's device using the clocks.
> 
> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
> ---
>  include/dt-bindings/clock/sprd,sc9863a-clk.h | 353 +++++++++++++++++++
>  1 file changed, 353 insertions(+)
>  create mode 100644 include/dt-bindings/clock/sprd,sc9863a-clk.h
> 
> diff --git a/include/dt-bindings/clock/sprd,sc9863a-clk.h b/include/dt-bindings/clock/sprd,sc9863a-clk.h
> new file mode 100644
> index 000000000000..bb57312441c7
> --- /dev/null
> +++ b/include/dt-bindings/clock/sprd,sc9863a-clk.h
> @@ -0,0 +1,353 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Unisoc SC9863A platform clocks
> + *
> + * Copyright (C) 2019, Unisoc Communications Inc.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_SC9860_H_
> +#define _DT_BINDINGS_CLK_SC9860_H_
> +
> +#define	CLK_MPLL0_GATE		0
> +#define	CLK_DPLL0_GATE		1
> +#define	CLK_LPLL_GATE		2
> +#define	CLK_GPLL_GATE		3
> +#define	CLK_DPLL1_GATE		4
> +#define	CLK_MPLL1_GATE		5
> +#define	CLK_MPLL2_GATE		6
> +#define CLK_ISPPLL_GATE		7
> +#define	CLK_PMU_APB_NUM		(CLK_ISPPLL_GATE + 1)
> +
> +#define	CLK_AUDIO_GATE		0
> +#define CLK_RPLL		1

Inconsistent formatting. Use 1 space after #define.

> +#define CLK_RPLL_390M		2
> +#define CLK_RPLL_260M		3
> +#define CLK_RPLL_195M		4
> +#define CLK_RPLL_26M		5
> +#define CLK_ANLG_PHY_G5_NUM	(CLK_RPLL_26M + 1)
> +
> +#define CLK_TWPLL		0
> +#define CLK_TWPLL_768M		1
> +#define CLK_TWPLL_384M		2
> +#define CLK_TWPLL_192M		3
> +#define CLK_TWPLL_96M		4
> +#define CLK_TWPLL_48M		5
> +#define CLK_TWPLL_24M		6
> +#define CLK_TWPLL_12M		7
> +#define CLK_TWPLL_512M		8
> +#define CLK_TWPLL_256M		9
> +#define CLK_TWPLL_128M		10
> +#define CLK_TWPLL_64M		11
> +#define CLK_TWPLL_307M2		12
> +#define CLK_TWPLL_219M4		13
> +#define CLK_TWPLL_170M6		14
> +#define CLK_TWPLL_153M6		15
> +#define CLK_TWPLL_76M8		16
> +#define CLK_TWPLL_51M2		17
> +#define CLK_TWPLL_38M4		18
> +#define CLK_TWPLL_19M2		19
> +#define CLK_LPLL		20
> +#define CLK_LPLL_409M6		21
> +#define CLK_LPLL_245M76		22
> +#define CLK_GPLL		23
> +#define CLK_ISPPLL		24
> +#define CLK_ISPPLL_468M		25
> +#define CLK_ANLG_PHY_G1_NUM	(CLK_ISPPLL_468M + 1)
> +
> +#define CLK_DPLL0		0
> +#define CLK_DPLL1		1
> +#define CLK_DPLL0_933M		2
> +#define	CLK_DPLL0_622M3		3
> +#define CLK_DPLL0_400M		4
> +#define CLK_DPLL0_266M7		5
> +#define CLK_DPLL0_123M1		6
> +#define CLK_DPLL0_50M		7
> +#define CLK_ANLG_PHY_G7_NUM	(CLK_DPLL0_50M + 1)
> +
> +#define CLK_MPLL0		0
> +#define CLK_MPLL1		1
> +#define CLK_MPLL2		2
> +#define CLK_MPLL2_675M		3
> +#define CLK_ANLG_PHY_G4_NUM	(CLK_MPLL2_675M + 1)
> +
> +#define CLK_AP_APB		0
> +#define CLK_AP_CE		1
> +#define CLK_NANDC_ECC		2
> +#define CLK_NANDC_26M		3
> +#define CLK_EMMC_32K		4
> +#define CLK_SDIO0_32K		5
> +#define CLK_SDIO1_32K		6
> +#define CLK_SDIO2_32K		7
> +#define CLK_OTG_UTMI		8
> +#define CLK_AP_UART0		9
> +#define CLK_AP_UART1		10
> +#define CLK_AP_UART2		11
> +#define CLK_AP_UART3		12
> +#define CLK_AP_UART4		13
> +#define CLK_AP_I2C0		14
> +#define CLK_AP_I2C1		15
> +#define CLK_AP_I2C2		16
> +#define CLK_AP_I2C3		17
> +#define CLK_AP_I2C4		18
> +#define CLK_AP_I2C5		19
> +#define CLK_AP_I2C6		20
> +#define CLK_AP_SPI0		21
> +#define CLK_AP_SPI1		22
> +#define CLK_AP_SPI2		23
> +#define CLK_AP_SPI3		24
> +#define CLK_AP_IIS0		25
> +#define CLK_AP_IIS1		26
> +#define CLK_AP_IIS2		27
> +#define CLK_SIM0		28
> +#define CLK_SIM0_32K		29
> +#define CLK_AP_CLK_NUM		(CLK_SIM0_32K + 1)
> +
> +#define CLK_13M			0
> +#define CLK_6M5			1
> +#define CLK_4M3			2
> +#define CLK_2M			3
> +#define CLK_250K		4
> +#define CLK_RCO_25M		5
> +#define CLK_RCO_4M		6
> +#define CLK_RCO_2M		7
> +#define CLK_EMC			8
> +#define CLK_AON_APB		9
> +#define CLK_ADI			10
> +#define CLK_AUX0		11
> +#define CLK_AUX1		12
> +#define CLK_AUX2		13
> +#define CLK_PROBE		14
> +#define CLK_PWM0		15
> +#define CLK_PWM1		16
> +#define CLK_PWM2		17
> +#define CLK_AON_THM		18
> +#define CLK_AUDIF		19
> +#define CLK_CPU_DAP		20
> +#define CLK_CPU_TS		21
> +#define CLK_DJTAG_TCK		22
> +#define CLK_EMC_REF		23
> +#define CLK_CSSYS		24
> +#define CLK_AON_PMU		25
> +#define CLK_PMU_26M		26
> +#define CLK_AON_TMR		27
> +#define CLK_POWER_CPU		28
> +#define CLK_AP_AXI		29
> +#define CLK_SDIO0_2X		30
> +#define CLK_SDIO1_2X		31
> +#define CLK_SDIO2_2X		32
> +#define CLK_EMMC_2X		33
> +#define CLK_DPU			34
> +#define CLK_DPU_DPI		35
> +#define CLK_OTG_REF		36
> +#define CLK_SDPHY_APB		37
> +#define CLK_ALG_IO_APB		38
> +#define CLK_GPU_CORE		39
> +#define CLK_GPU_SOC		40
> +#define CLK_MM_EMC		41
> +#define CLK_MM_AHB		42
> +#define CLK_BPC			43
> +#define CLK_DCAM_IF		44
> +#define CLK_ISP			45
> +#define CLK_JPG			46
> +#define CLK_CPP			47
> +#define CLK_SENSOR0		48
> +#define CLK_SENSOR1		49
> +#define CLK_SENSOR2		50
> +#define CLK_MM_VEMC		51
> +#define CLK_MM_VAHB		52
> +#define CLK_VSP			53
> +#define CLK_CORE0		54
> +#define CLK_CORE1		55
> +#define CLK_CORE2		56
> +#define CLK_CORE3		57
> +#define CLK_CORE4		58
> +#define CLK_CORE5		59
> +#define CLK_CORE6		60
> +#define CLK_CORE7		61
> +#define CLK_SCU			62
> +#define CLK_ACE			63
> +#define CLK_AXI_PERIPH		64
> +#define CLK_AXI_ACP		65
> +#define CLK_ATB			66
> +#define CLK_DEBUG_APB		67
> +#define CLK_GIC			68
> +#define CLK_PERIPH		69
> +#define CLK_AON_CLK_NUM		(CLK_VSP + 1)
> +
> +#define CLK_OTG_EB		0
> +#define CLK_DMA_EB		1
> +#define CLK_CE_EB		2
> +#define CLK_NANDC_EB		3
> +#define CLK_SDIO0_EB		4
> +#define CLK_SDIO1_EB		5
> +#define CLK_SDIO2_EB		6
> +#define CLK_EMMC_EB		7
> +#define CLK_EMMC_32K_EB		8
> +#define CLK_SDIO0_32K_EB	9
> +#define CLK_SDIO1_32K_EB	10
> +#define CLK_SDIO2_32K_EB	11
> +#define CLK_NANDC_26M_EB	12
> +#define CLK_DMA_EB2		13
> +#define CLK_CE_EB2		14
> +#define CLK_AP_AHB_GATE_NUM	(CLK_CE_EB2 + 1)
> +
> +#define CLK_ADC_EB		0
> +#define CLK_FM_EB		1
> +#define CLK_TPC_EB		2
> +#define CLK_GPIO_EB		3
> +#define CLK_PWM0_EB		4
> +#define CLK_PWM1_EB		5
> +#define CLK_PWM2_EB		6
> +#define CLK_PWM3_EB		7
> +#define CLK_KPD_EB		8
> +#define CLK_AON_SYST_EB		9
> +#define CLK_AP_SYST_EB		10
> +#define CLK_AON_TMR_EB		11
> +#define CLK_AP_TMR0_EB		12
> +#define CLK_EFUSE_EB		13
> +#define CLK_EIC_EB		14
> +#define CLK_INTC_EB		15
> +#define CLK_ADI_EB		16
> +#define CLK_AUDIF_EB		17
> +#define CLK_AUD_EB		18
> +#define CLK_VBC_EB		19
> +#define CLK_PIN_EB		20
> +#define CLK_IPI_EB		21
> +#define CLK_SPLK_EB		22
> +#define CLK_MSPI_EB		23
> +#define CLK_AP_WDG_EB		24
> +#define CLK_MM_EB		25
> +#define CLK_AON_APB_CKG_EB	26
> +#define CLK_CA53_TS0_EB		27
> +#define CLK_CA53_TS1_EB		28
> +#define CLK_CS53_DAP_EB		29
> +#define CLK_I2C_EB		30
> +#define CLK_PMU_EB		31
> +#define CLK_THM_EB		32
> +#define CLK_AUX0_EB		33
> +#define CLK_AUX1_EB		34
> +#define CLK_AUX2_EB		35
> +#define CLK_PROBE_EB		36
> +#define CLK_EMC_REF_EB		37
> +#define CLK_CA53_WDG_EB		38
> +#define CLK_AP_TMR1_EB		39
> +#define CLK_AP_TMR2_EB		40
> +#define CLK_DISP_EMC_EB		41
> +#define CLK_ZIP_EMC_EB		42
> +#define CLK_GSP_EMC_EB		43
> +#define CLK_MM_VSP_EB		44
> +#define CLK_MDAR_EB		45
> +#define CLK_RTC4M0_CAL_EB	46
> +#define CLK_RTC4M1_CAL_EB	47
> +#define CLK_DJTAG_EB		48
> +#define CLK_MBOX_EB		49
> +#define CLK_AON_DMA_EB		50
> +#define CLK_AON_APB_DEF_EB	51
> +#define CLK_ORP_JTAG_EB		52
> +#define CLK_DBG_EB		53
> +#define CLK_DBG_EMC_EB		54
> +#define CLK_CROSS_TRIG_EB	55
> +#define CLK_SERDES_DPHY_EB	56
> +#define CLK_ARCH_RTC_EB		57
> +#define CLK_KPD_RTC_EB		58
> +#define CLK_AON_SYST_RTC_EB	59
> +#define CLK_AP_SYST_RTC_EB	60
> +#define CLK_AON_TMR_RTC_EB	61
> +#define CLK_AP_TMR0_RTC_EB	62
> +#define CLK_EIC_RTC_EB		63
> +#define CLK_EIC_RTCDV5_EB	64
> +#define CLK_AP_WDG_RTC_EB	65
> +#define CLK_CA53_WDG_RTC_EB	66
> +#define CLK_THM_RTC_EB		67
> +#define CLK_ATHMA_RTC_EB	68
> +#define CLK_GTHMA_RTC_EB	69
> +#define CLK_ATHMA_RTC_A_EB	70
> +#define CLK_GTHMA_RTC_A_EB	71
> +#define CLK_AP_TMR1_RTC_EB	72
> +#define CLK_AP_TMR2_RTC_EB	73
> +#define CLK_DXCO_LC_RTC_EB	74
> +#define CLK_BB_CAL_RTC_EB	75
> +#define CLK_GNU_EB		76
> +#define CLK_DISP_EB		77
> +#define CLK_MM_EMC_EB		78
> +#define CLK_POWER_CPU_EB	79
> +#define CLK_HW_I2C_EB		80
> +#define CLK_MM_VSP_EMC_EB	81
> +#define CLK_VSP_EB		82
> +#define CLK_CSSYS_EB		83
> +#define CLK_DMC_EB		84
> +#define CLK_ROSC_EB		85
> +#define CLK_S_D_CFG_EB		86
> +#define CLK_S_D_REF_EB		87
> +#define CLK_B_DMA_EB		88
> +#define CLK_ANLG_EB		89
> +#define CLK_ANLG_APB_EB		90
> +#define CLK_BSMTMR_EB		91
> +#define CLK_AP_AXI_EB		92
> +#define CLK_AP_INTC0_EB		93
> +#define CLK_AP_INTC1_EB		94
> +#define CLK_AP_INTC2_EB		95
> +#define CLK_AP_INTC3_EB		96
> +#define CLK_AP_INTC4_EB		97
> +#define CLK_AP_INTC5_EB		98
> +#define CLK_SCC_EB		99
> +#define CLK_DPHY_CFG_EB		100
> +#define CLK_DPHY_REF_EB		101
> +#define CLK_CPHY_CFG_EB		102
> +#define CLK_OTG_REF_EB		103
> +#define CLK_SERDES_EB		104
> +#define CLK_AON_AP_EMC_EB	105
> +#define CLK_AON_APB_GATE_NUM	(CLK_AON_AP_EMC_EB + 1)
> +
> +#define CLK_MAHB_CKG_EB		0
> +#define CLK_MDCAM_EB		1
> +#define CLK_MISP_EB		2
> +#define CLK_MAHBCSI_EB		3
> +#define CLK_MCSI_S_EB		4
> +#define CLK_MCSI_T_EB		5
> +#define CLK_DCAM_AXI_EB		6
> +#define CLK_ISP_AXI_EB		7
> +#define CLK_MCSI_EB		8
> +#define CLK_MCSI_S_CKG_EB	9
> +#define CLK_MCSI_T_CKG_EB	10
> +#define CLK_SENSOR0_EB		11
> +#define CLK_SENSOR1_EB		12
> +#define CLK_SENSOR2_EB		13
> +#define CLK_MCPHY_CFG_EB	14
> +#define CLK_MM_GATE_NUM		(CLK_MCPHY_CFG_EB + 1)
> +
> +#define CLK_MIPI_CSI		0
> +#define CLK_MIPI_CSI_S		1
> +#define CLK_MIPI_CSI_M		2
> +#define CLK_MM_CLK_NUM		(CLK_MIPI_CSI_M + 1)
> +
> +#define CLK_VCKG_EB		0
> +#define CLK_VVSP_EB		1
> +#define CLK_VJPG_EB		2
> +#define CLK_VCPP_EB		3
> +#define CLK_VSP_AHB_GATE_NUM	(CLK_VCPP_EB + 1)
> +
> +#define CLK_SIM0_EB		0
> +#define CLK_IIS0_EB		1
> +#define CLK_IIS1_EB		2
> +#define CLK_IIS2_EB		3
> +#define CLK_SPI0_EB		4
> +#define CLK_SPI1_EB		5
> +#define CLK_SPI2_EB		6
> +#define CLK_I2C0_EB		7
> +#define CLK_I2C1_EB		8
> +#define CLK_I2C2_EB		9
> +#define CLK_I2C3_EB		10
> +#define CLK_I2C4_EB		11
> +#define CLK_UART0_EB		12
> +#define CLK_UART1_EB		13
> +#define CLK_UART2_EB		14
> +#define CLK_UART3_EB		15
> +#define CLK_UART4_EB		16
> +#define CLK_SIM0_32K_EB		17
> +#define CLK_SPI3_EB		18
> +#define CLK_I2C5_EB		19
> +#define CLK_I2C6_EB		20
> +#define CLK_AP_APB_GATE_NUM	(CLK_I2C6_EB + 1)
> +
> +#endif /* _DT_BINDINGS_CLK_SC9860_H_ */
> -- 
> 2.20.1
> 
> 

[PATCH 5/5] clk: sprd: add clocks support for SC9863A

[Chunyan Zhang]

Add the list of clocks for the Unisoc SC9863A, alone with clock
initialization.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
---
 drivers/clk/sprd/Kconfig       |    8 +
 drivers/clk/sprd/Makefile      |    1 +
 drivers/clk/sprd/sc9863a-clk.c | 1711 ++++++++++++++++++++++++++++++++
 3 files changed, 1720 insertions(+)
 create mode 100644 drivers/clk/sprd/sc9863a-clk.c

diff --git a/drivers/clk/sprd/Kconfig b/drivers/clk/sprd/Kconfig
index 3c219af25100..e18c80fbe804 100644
--- a/drivers/clk/sprd/Kconfig
+++ b/drivers/clk/sprd/Kconfig
@@ -13,4 +13,12 @@ config SPRD_SC9860_CLK
 	tristate "Support for the Spreadtrum SC9860 clocks"
 	depends on (ARM64 && ARCH_SPRD) || COMPILE_TEST
 	default ARM64 && ARCH_SPRD
+
+config SPRD_SC9863A_CLK
+	tristate "Support for the Spreadtrum SC9863A clocks"
+	depends on (ARM64 && ARCH_SPRD) || COMPILE_TEST
+	default ARM64 && ARCH_SPRD
+	help
+	  Support for the global clock controller on sc9863a devices.
+	  Say Y if you want to use peripheral devices on sc9863a SoC.
 endif
diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index d4c00788d53c..41d90e0d7863 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -10,3 +10,4 @@ clk-sprd-y	+= pll.o
 
 ## SoC support
 obj-$(CONFIG_SPRD_SC9860_CLK)	+= sc9860-clk.o
+obj-$(CONFIG_SPRD_SC9863A_CLK)	+= sc9863a-clk.o
diff --git a/drivers/clk/sprd/sc9863a-clk.c b/drivers/clk/sprd/sc9863a-clk.c
new file mode 100644
index 000000000000..5369db1090f0
--- /dev/null
+++ b/drivers/clk/sprd/sc9863a-clk.c
@@ -0,0 +1,1711 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SC9863A clock driver
+ *
+ * Copyright (C) 2019 Unisoc, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@unisoc.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/sprd,sc9863a-clk.h>
+
+#include "common.h"
+#include "composite.h"
+#include "div.h"
+#include "gate.h"
+#include "mux.h"
+#include "pll.h"
+
+SPRD_PLL_SC_GATE_CLK(mpll0_gate, "mpll0-gate", "ext-26m", 0x94,
+				0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+SPRD_PLL_SC_GATE_CLK(dpll0_gate, "dpll0-gate", "ext-26m", 0x98,
+				0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+SPRD_PLL_SC_GATE_CLK(lpll_gate, "lpll-gate", "ext-26m", 0x9c,
+				0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+SPRD_PLL_SC_GATE_CLK(gpll_gate, "gpll-gate", "ext-26m", 0xa8,
+				0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+SPRD_PLL_SC_GATE_CLK(dpll1_gate, "dpll1-gate", "ext-26m", 0x1dc,
+				0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+SPRD_PLL_SC_GATE_CLK(mpll1_gate, "mpll1-gate", "ext-26m", 0x1e0,
+				0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+SPRD_PLL_SC_GATE_CLK(mpll2_gate, "mpll2-gate", "ext-26m", 0x1e4,
+				0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+SPRD_PLL_SC_GATE_CLK(isppll_gate, "isppll-gate", "ext-26m", 0x1e8,
+				0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+
+static struct sprd_clk_common *sc9863a_pmu_gate_clks[] = {
+	/* address base is 0x402b0000 */
+	&mpll0_gate.common,
+	&dpll0_gate.common,
+	&lpll_gate.common,
+	&gpll_gate.common,
+	&dpll1_gate.common,
+	&mpll1_gate.common,
+	&mpll2_gate.common,
+	&isppll_gate.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_pmu_gate_hws = {
+	.hws	= {
+		[CLK_MPLL0_GATE]	= &mpll0_gate.common.hw,
+		[CLK_DPLL0_GATE]	= &dpll0_gate.common.hw,
+		[CLK_LPLL_GATE]		= &lpll_gate.common.hw,
+		[CLK_GPLL_GATE]		= &gpll_gate.common.hw,
+		[CLK_DPLL1_GATE]	= &dpll1_gate.common.hw,
+		[CLK_MPLL1_GATE]	= &mpll1_gate.common.hw,
+		[CLK_MPLL2_GATE]	= &mpll2_gate.common.hw,
+		[CLK_ISPPLL_GATE]	= &isppll_gate.common.hw,
+	},
+	.num	= CLK_PMU_APB_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_pmu_gate_desc = {
+	.clk_clks	= sc9863a_pmu_gate_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_pmu_gate_clks),
+	.hw_clks        = &sc9863a_pmu_gate_hws,
+};
+
+static const u64 itable[5] = {4, 1000000000, 1200000000,
+			      1400000000, 1600000000};
+
+static const struct clk_bit_field f_twpll[PLL_FACT_MAX] = {
+	{ .shift = 95,	.width = 1 },	/* lock_done	*/
+	{ .shift = 0,	.width = 1 },	/* div_s	*/
+	{ .shift = 1,	.width = 1 },	/* mod_en	*/
+	{ .shift = 2,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 3,	.width = 3 },	/* ibias	*/
+	{ .shift = 8,	.width = 11 },	/* n		*/
+	{ .shift = 55,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 0,	.width = 0 },	/* postdiv	*/
+};
+static SPRD_PLL_WITH_ITABLE_1K(twpll_clk, "twpll", "ext-26m", 0x4,
+				   3, itable, f_twpll, 240);
+static CLK_FIXED_FACTOR(twpll_768m, "twpll-768m", "twpll", 2, 1, 0);
+static CLK_FIXED_FACTOR(twpll_384m, "twpll-384m", "twpll", 4, 1, 0);
+static CLK_FIXED_FACTOR(twpll_192m, "twpll-192m", "twpll", 8, 1, 0);
+static CLK_FIXED_FACTOR(twpll_96m, "twpll-96m", "twpll", 16, 1, 0);
+static CLK_FIXED_FACTOR(twpll_48m, "twpll-48m", "twpll", 32, 1, 0);
+static CLK_FIXED_FACTOR(twpll_24m, "twpll-24m", "twpll", 64, 1, 0);
+static CLK_FIXED_FACTOR(twpll_12m, "twpll-12m", "twpll", 128, 1, 0);
+static CLK_FIXED_FACTOR(twpll_512m, "twpll-512m", "twpll", 3, 1, 0);
+static CLK_FIXED_FACTOR(twpll_256m, "twpll-256m", "twpll", 6, 1, 0);
+static CLK_FIXED_FACTOR(twpll_128m, "twpll-128m", "twpll", 12, 1, 0);
+static CLK_FIXED_FACTOR(twpll_64m, "twpll-64m", "twpll", 24, 1, 0);
+static CLK_FIXED_FACTOR(twpll_307m2, "twpll-307m2", "twpll", 5, 1, 0);
+static CLK_FIXED_FACTOR(twpll_219m4, "twpll-219m4", "twpll", 7, 1, 0);
+static CLK_FIXED_FACTOR(twpll_170m6, "twpll-170m6", "twpll", 9, 1, 0);
+static CLK_FIXED_FACTOR(twpll_153m6, "twpll-153m6", "twpll", 10, 1, 0);
+static CLK_FIXED_FACTOR(twpll_76m8, "twpll-76m8", "twpll", 20, 1, 0);
+static CLK_FIXED_FACTOR(twpll_51m2, "twpll-51m2", "twpll", 30, 1, 0);
+static CLK_FIXED_FACTOR(twpll_38m4, "twpll-38m4", "twpll", 40, 1, 0);
+static CLK_FIXED_FACTOR(twpll_19m2, "twpll-19m2", "twpll", 80, 1, 0);
+
+static const struct clk_bit_field f_lpll[PLL_FACT_MAX] = {
+	{ .shift = 95,	.width = 1 },	/* lock_done	*/
+	{ .shift = 0,	.width = 1 },	/* div_s	*/
+	{ .shift = 1,	.width = 1 },	/* mod_en	*/
+	{ .shift = 2,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 6,	.width = 2 },	/* ibias	*/
+	{ .shift = 8,	.width = 11 },	/* n		*/
+	{ .shift = 55,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 0,	.width = 0 },	/* postdiv	*/
+};
+static SPRD_PLL_WITH_ITABLE_1K(lpll_clk, "lpll", "lpll-gate", 0x20,
+				   3, itable, f_lpll, 240);
+static CLK_FIXED_FACTOR(lpll_409m6, "lpll-409m6", "lpll", 3, 1, 0);
+static CLK_FIXED_FACTOR(lpll_245m76, "lpll-245m76", "lpll", 5, 1, 0);
+
+static const struct clk_bit_field f_gpll[PLL_FACT_MAX] = {
+	{ .shift = 95,	.width = 1 },	/* lock_done	*/
+	{ .shift = 0,	.width = 1 },	/* div_s	*/
+	{ .shift = 1,	.width = 1 },	/* mod_en	*/
+	{ .shift = 2,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 6,	.width = 2 },	/* ibias	*/
+	{ .shift = 8,	.width = 11 },	/* n		*/
+	{ .shift = 55,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 80,	.width = 1 },	/* postdiv	*/
+};
+static SPRD_PLL_WITH_ITABLE_K_FVCO(gpll_clk, "gpll", "gpll-gate", 0x38,
+				   3, itable, f_gpll, 240,
+				   1000, 1000, 1, 400000000);
+
+#define f_isppll f_gpll
+static SPRD_PLL_WITH_ITABLE_1K(isppll_clk, "isppll", "isppll-gate", 0x50,
+				   3, itable, f_isppll, 240);
+static CLK_FIXED_FACTOR(isppll_468m, "isppll-468m", "isppll", 2, 1, 0);
+
+static struct sprd_clk_common *sc9863a_pll_clks[] = {
+	/* address base is 0x40353000 */
+	&twpll_clk.common,
+	&lpll_clk.common,
+	&gpll_clk.common,
+	&isppll_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_pll_hws = {
+	.hws	= {
+		[CLK_TWPLL]		= &twpll_clk.common.hw,
+		[CLK_TWPLL_768M]	= &twpll_768m.hw,
+		[CLK_TWPLL_384M]	= &twpll_384m.hw,
+		[CLK_TWPLL_192M]	= &twpll_192m.hw,
+		[CLK_TWPLL_96M]		= &twpll_96m.hw,
+		[CLK_TWPLL_48M]		= &twpll_48m.hw,
+		[CLK_TWPLL_24M]		= &twpll_24m.hw,
+		[CLK_TWPLL_12M]		= &twpll_12m.hw,
+		[CLK_TWPLL_512M]	= &twpll_512m.hw,
+		[CLK_TWPLL_256M]	= &twpll_256m.hw,
+		[CLK_TWPLL_128M]	= &twpll_128m.hw,
+		[CLK_TWPLL_64M]		= &twpll_64m.hw,
+		[CLK_TWPLL_307M2]	= &twpll_307m2.hw,
+		[CLK_TWPLL_219M4]	= &twpll_219m4.hw,
+		[CLK_TWPLL_170M6]	= &twpll_170m6.hw,
+		[CLK_TWPLL_153M6]	= &twpll_153m6.hw,
+		[CLK_TWPLL_76M8]	= &twpll_76m8.hw,
+		[CLK_TWPLL_51M2]	= &twpll_51m2.hw,
+		[CLK_TWPLL_38M4]	= &twpll_38m4.hw,
+		[CLK_TWPLL_19M2]	= &twpll_19m2.hw,
+		[CLK_LPLL]		= &lpll_clk.common.hw,
+		[CLK_LPLL_409M6]	= &lpll_409m6.hw,
+		[CLK_LPLL_245M76]	= &lpll_245m76.hw,
+		[CLK_GPLL]		= &gpll_clk.common.hw,
+		[CLK_ISPPLL]		= &isppll_clk.common.hw,
+		[CLK_ISPPLL_468M]	= &isppll_468m.hw,
+
+	},
+	.num	= CLK_ANLG_PHY_G1_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_pll_desc = {
+	.clk_clks	= sc9863a_pll_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_pll_clks),
+	.hw_clks        = &sc9863a_pll_hws,
+};
+
+#define f_mpll f_gpll
+static const u64 itable_mpll[6] = {5, 1000000000, 1200000000, 1400000000,
+				   1600000000, 1800000000};
+static SPRD_PLL_WITH_ITABLE_K_FVCO(mpll0_clk, "mpll0", "mpll0-gate", 0x0,
+				   3, itable_mpll, f_mpll, 240,
+				   1000, 1000, 1, 1000000000);
+static SPRD_PLL_WITH_ITABLE_K_FVCO(mpll1_clk, "mpll1", "mpll1-gate", 0x18,
+				   3, itable_mpll, f_mpll, 240,
+				   1000, 1000, 1, 1000000000);
+static SPRD_PLL_WITH_ITABLE_K_FVCO(mpll2_clk, "mpll2", "mpll2-gate", 0x30,
+				   3, itable_mpll, f_mpll, 240,
+				   1000, 1000, 1, 1000000000);
+static CLK_FIXED_FACTOR(mpll2_675m, "mpll2-675m", "mpll2", 2, 1, 0);
+
+static struct sprd_clk_common *sc9863a_mpll_clks[] = {
+	/* address base is 0x40359000 */
+	&mpll0_clk.common,
+	&mpll1_clk.common,
+	&mpll2_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_mpll_hws = {
+	.hws	= {
+		[CLK_MPLL0]		= &mpll0_clk.common.hw,
+		[CLK_MPLL1]		= &mpll1_clk.common.hw,
+		[CLK_MPLL2]		= &mpll2_clk.common.hw,
+		[CLK_MPLL2_675M]	= &mpll2_675m.hw,
+
+	},
+	.num	= CLK_ANLG_PHY_G4_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_mpll_desc = {
+	.clk_clks	= sc9863a_mpll_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_mpll_clks),
+	.hw_clks        = &sc9863a_mpll_hws,
+};
+
+static SPRD_SC_GATE_CLK(audio_gate,	"audio-gate",	"ext-26m", 0x4,
+		     0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+
+#define f_rpll f_lpll
+static SPRD_PLL_WITH_ITABLE_1K(rpll_clk, "rpll", "ext-26m", 0x10,
+				   3, itable, f_rpll, 240);
+
+static CLK_FIXED_FACTOR(rpll_390m, "rpll-390m", "rpll", 2, 1, 0);
+static CLK_FIXED_FACTOR(rpll_260m, "rpll-260m", "rpll", 3, 1, 0);
+static CLK_FIXED_FACTOR(rpll_195m, "rpll-195m", "rpll", 4, 1, 0);
+static CLK_FIXED_FACTOR(rpll_26m, "rpll-26m", "rpll", 30, 1, 0);
+
+static struct sprd_clk_common *sc9863a_rpll_clks[] = {
+	/* address base is 0x4035c000 */
+	&audio_gate.common,
+	&rpll_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_rpll_hws = {
+	.hws	= {
+		[CLK_AUDIO_GATE]	= &audio_gate.common.hw,
+		[CLK_RPLL]		= &rpll_clk.common.hw,
+		[CLK_RPLL_390M]		= &rpll_390m.hw,
+		[CLK_RPLL_260M]		= &rpll_260m.hw,
+		[CLK_RPLL_195M]		= &rpll_195m.hw,
+		[CLK_RPLL_26M]		= &rpll_26m.hw,
+	},
+	.num	= CLK_ANLG_PHY_G5_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_rpll_desc = {
+	.clk_clks	= sc9863a_rpll_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_rpll_clks),
+	.hw_clks        = &sc9863a_rpll_hws,
+};
+
+#define f_dpll f_lpll
+static const u64 itable_dpll[5] = {4, 1211000000, 1320000000, 1570000000,
+				   1866000000};
+static SPRD_PLL_WITH_ITABLE_1K(dpll0_clk, "dpll0", "dpll0-gate", 0x0,
+				   3, itable_dpll, f_dpll, 240);
+static SPRD_PLL_WITH_ITABLE_1K(dpll1_clk, "dpll1", "dpll1-gate", 0x18,
+				   3, itable_dpll, f_dpll, 240);
+
+static CLK_FIXED_FACTOR(dpll0_933m, "dpll0-933m", "dpll0", 2, 1, 0);
+static CLK_FIXED_FACTOR(dpll0_622m3, "dpll0-622m3", "dpll0", 3, 1, 0);
+static CLK_FIXED_FACTOR(dpll1_400m, "dpll1-400m", "dpll1", 4, 1, 0);
+static CLK_FIXED_FACTOR(dpll1_266m7, "dpll1-266m7", "dpll1", 6, 1, 0);
+static CLK_FIXED_FACTOR(dpll1_123m1, "dpll1-123m1", "dpll1", 13, 1, 0);
+static CLK_FIXED_FACTOR(dpll1_50m, "dpll1-50m", "dpll1", 32, 1, 0);
+
+static struct sprd_clk_common *sc9863a_dpll_clks[] = {
+	/* address base is 0x40363000 */
+	&dpll0_clk.common,
+	&dpll1_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_dpll_hws = {
+	.hws	= {
+		[CLK_DPLL0]		= &dpll0_clk.common.hw,
+		[CLK_DPLL1]		= &dpll1_clk.common.hw,
+		[CLK_DPLL0_933M]	= &dpll0_933m.hw,
+		[CLK_DPLL0_622M3]	= &dpll0_622m3.hw,
+		[CLK_DPLL0_400M]	= &dpll1_400m.hw,
+		[CLK_DPLL0_266M7]	= &dpll1_266m7.hw,
+		[CLK_DPLL0_123M1]	= &dpll1_123m1.hw,
+		[CLK_DPLL0_50M]		= &dpll1_50m.hw,
+
+	},
+	.num	= CLK_ANLG_PHY_G7_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_dpll_desc = {
+	.clk_clks	= sc9863a_dpll_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_dpll_clks),
+	.hw_clks        = &sc9863a_dpll_hws,
+};
+
+#define SC9863A_MUX_FLAG	\
+	(CLK_GET_RATE_NOCACHE | CLK_SET_RATE_NO_REPARENT)
+
+/* ap clocks */
+static const char * const ap_apb_parents[] = { "ext-26m", "twpll-64m",
+					       "twpll-96m", "twpll-128m" };
+static SPRD_MUX_CLK(ap_apb_clk, "ap-apb-clk", ap_apb_parents, 0x20,
+			0, 2, SC9863A_MUX_FLAG);
+
+static const char * const ap_ce_parents[] = { "ext-26m", "twpll-256m"};
+static SPRD_COMP_CLK(ap_ce, "ap-ce", ap_ce_parents, 0x24,
+		     0, 1, 8, 3, 0);
+
+static const char * const nandc_ecc_parents[] = { "ext-26m", "twpll-256m",
+						"twpll-307m2" };
+static SPRD_COMP_CLK(nandc_ecc_clk, "nandc-ecc-clk", nandc_ecc_parents, 0x28,
+		     0, 2, 8, 3, 0);
+
+static const char * const nandc_26m_parents[] = { "ext-32k", "ext-26m" };
+static SPRD_MUX_CLK(nandc_26m_clk, "nandc-26m-clk", nandc_26m_parents, 0x2c,
+			0, 1, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK(emmc_32k_clk, "emmc-32k-clk", nandc_26m_parents, 0x30,
+			0, 1, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK(sdio0_32k_clk, "sdio0-32k-clk", nandc_26m_parents, 0x34,
+			0, 1, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK(sdio1_32k_clk, "sdio1-32k-clk", nandc_26m_parents, 0x38,
+			0, 1, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK(sdio2_32k_clk, "sdio2-32k-clk", nandc_26m_parents, 0x3c,
+			0, 1, SC9863A_MUX_FLAG);
+
+static SPRD_GATE_CLK(otg_utmi, "otg-utmi", "aon-apb-clk", 0x40,
+		     BIT(16), CLK_IGNORE_UNUSED, 0);
+
+static const char * const ap_uart_parents[] = { "ext-26m", "twpll-48m",
+					"twpll-51m2", "twpll-96m" };
+static SPRD_COMP_CLK(ap_uart0_clk,	"ap-uart0-clk",	ap_uart_parents, 0x44,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_uart1_clk,	"ap-uart1-clk",	ap_uart_parents, 0x48,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_uart2_clk,	"ap-uart2-clk",	ap_uart_parents, 0x4c,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_uart3_clk,	"ap-uart3-clk",	ap_uart_parents, 0x50,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_uart4_clk,	"ap-uart4-clk",	ap_uart_parents, 0x54,
+		     0, 2, 8, 3, 0);
+
+static const char * const i2c_parents[] = { "ext-26m", "twpll-48m",
+					    "twpll-51m2", "twpll-153m6" };
+static SPRD_COMP_CLK(ap_i2c0_clk, "ap-i2c0-clk", i2c_parents, 0x58,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_i2c1_clk, "ap-i2c1-clk", i2c_parents, 0x5c,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_i2c2_clk, "ap-i2c2-clk", i2c_parents, 0x60,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_i2c3_clk, "ap-i2c3-clk", i2c_parents, 0x64,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_i2c4_clk, "ap-i2c4-clk", i2c_parents, 0x68,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_i2c5_clk, "ap-i2c5-clk", i2c_parents, 0x6c,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_i2c6_clk, "ap-i2c6-clk", i2c_parents, 0x70,
+		     0, 2, 8, 3, 0);
+
+static const char * const spi_parents[] = { "ext-26m", "twpll-128m",
+					"twpll-153m6", "twpll-192m" };
+static SPRD_COMP_CLK(ap_spi0_clk, "ap-spi0-clk", spi_parents, 0x74,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_spi1_clk, "ap-spi1-clk", spi_parents, 0x78,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_spi2_clk, "ap-spi2-clk", spi_parents, 0x7c,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_spi3_clk, "ap-spi3-clk", spi_parents, 0x80,
+		     0, 2, 8, 3, 0);
+
+static const char * const iis_parents[] = { "ext-26m",
+					    "twpll-128m",
+					    "twpll-153m6" };
+static SPRD_COMP_CLK(ap_iis0_clk, "ap-iis0-clk", iis_parents, 0x84,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_iis1_clk, "ap-iis1-clk", iis_parents, 0x88,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(ap_iis2_clk, "ap-iis2-clk", iis_parents, 0x8c,
+		     0, 2, 8, 3, 0);
+
+static const char * const sim0_parents[] = { "ext-26m", "twpll-51m2",
+					"twpll-64m", "twpll-96m",
+					"twpll-128m" };
+static SPRD_COMP_CLK(sim0_clk, "sim0-clk", sim0_parents, 0x90,
+		     0, 3, 8, 3, 0);
+
+static const char * const sim0_32k_parents[] = { "ext-32k", "ext-26m" };
+static SPRD_MUX_CLK(sim0_32k_clk, "sim0-32k-clk", sim0_32k_parents, 0x94,
+			0, 1, SC9863A_MUX_FLAG);
+
+static struct sprd_clk_common *sc9863a_ap_clks[] = {
+	/* address base is 0x21500000 */
+	&ap_apb_clk.common,
+	&ap_ce.common,
+	&nandc_ecc_clk.common,
+	&nandc_26m_clk.common,
+	&emmc_32k_clk.common,
+	&sdio0_32k_clk.common,
+	&sdio1_32k_clk.common,
+	&sdio2_32k_clk.common,
+	&otg_utmi.common,
+	&ap_uart0_clk.common,
+	&ap_uart1_clk.common,
+	&ap_uart2_clk.common,
+	&ap_uart3_clk.common,
+	&ap_uart4_clk.common,
+	&ap_i2c0_clk.common,
+	&ap_i2c1_clk.common,
+	&ap_i2c2_clk.common,
+	&ap_i2c3_clk.common,
+	&ap_i2c4_clk.common,
+	&ap_i2c5_clk.common,
+	&ap_i2c6_clk.common,
+	&ap_spi0_clk.common,
+	&ap_spi1_clk.common,
+	&ap_spi2_clk.common,
+	&ap_spi3_clk.common,
+	&ap_iis0_clk.common,
+	&ap_iis1_clk.common,
+	&ap_iis2_clk.common,
+	&sim0_clk.common,
+	&sim0_32k_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_ap_clk_hws = {
+	.hws	= {
+		[CLK_AP_APB]	= &ap_apb_clk.common.hw,
+		[CLK_AP_CE]	= &ap_ce.common.hw,
+		[CLK_NANDC_ECC]	= &nandc_ecc_clk.common.hw,
+		[CLK_NANDC_26M]	= &nandc_26m_clk.common.hw,
+		[CLK_EMMC_32K]	= &emmc_32k_clk.common.hw,
+		[CLK_SDIO0_32K]	= &sdio0_32k_clk.common.hw,
+		[CLK_SDIO1_32K]	= &sdio1_32k_clk.common.hw,
+		[CLK_SDIO2_32K]	= &sdio2_32k_clk.common.hw,
+		[CLK_OTG_UTMI]	= &otg_utmi.common.hw,
+		[CLK_AP_UART0]	= &ap_uart0_clk.common.hw,
+		[CLK_AP_UART1]	= &ap_uart1_clk.common.hw,
+		[CLK_AP_UART2]	= &ap_uart2_clk.common.hw,
+		[CLK_AP_UART3]	= &ap_uart3_clk.common.hw,
+		[CLK_AP_UART4]	= &ap_uart4_clk.common.hw,
+		[CLK_AP_I2C0]	= &ap_i2c0_clk.common.hw,
+		[CLK_AP_I2C1]	= &ap_i2c1_clk.common.hw,
+		[CLK_AP_I2C2]	= &ap_i2c2_clk.common.hw,
+		[CLK_AP_I2C3]	= &ap_i2c3_clk.common.hw,
+		[CLK_AP_I2C4]	= &ap_i2c4_clk.common.hw,
+		[CLK_AP_I2C5]	= &ap_i2c5_clk.common.hw,
+		[CLK_AP_I2C6]	= &ap_i2c6_clk.common.hw,
+		[CLK_AP_SPI0]	= &ap_spi0_clk.common.hw,
+		[CLK_AP_SPI1]	= &ap_spi1_clk.common.hw,
+		[CLK_AP_SPI2]	= &ap_spi2_clk.common.hw,
+		[CLK_AP_SPI3]	= &ap_spi3_clk.common.hw,
+		[CLK_AP_IIS0]	= &ap_iis0_clk.common.hw,
+		[CLK_AP_IIS1]	= &ap_iis1_clk.common.hw,
+		[CLK_AP_IIS2]	= &ap_iis2_clk.common.hw,
+		[CLK_SIM0]	= &sim0_clk.common.hw,
+		[CLK_SIM0_32K]	= &sim0_32k_clk.common.hw,
+	},
+	.num	= CLK_AP_CLK_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_ap_clk_desc = {
+	.clk_clks	= sc9863a_ap_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_ap_clks),
+	.hw_clks	= &sc9863a_ap_clk_hws,
+};
+
+/* aon clocks */
+static CLK_FIXED_FACTOR(clk_13m,	"clk-13m",	"ext-26m",
+			2, 1, 0);
+static CLK_FIXED_FACTOR(clk_6m5,	"clk-6m5",	"ext-26m",
+			4, 1, 0);
+static CLK_FIXED_FACTOR(clk_4m3,	"clk-4m3",	"ext-26m",
+			6, 1, 0);
+static CLK_FIXED_FACTOR(clk_2m,		"clk-2m",	"ext-26m",
+			13, 1, 0);
+static CLK_FIXED_FACTOR(clk_250k,	"clk-250k",	"ext-26m",
+			104, 1, 0);
+
+static CLK_FIXED_FACTOR(rco_25m,	"rco-25m",	"rco-100m",
+			4, 1, 0);
+static CLK_FIXED_FACTOR(rco_4m,		"rco-4m",	"rco-100m",
+			25, 1, 0);
+static CLK_FIXED_FACTOR(rco_2m,		"rco-2m",	"rco-100m",
+			50, 1, 0);
+
+static const char * const emc_clk_parents[] = { "ext-26m", "twpll-384m",
+						 "twpll-512m", "twpll-768m",
+						 "twpll" };
+static SPRD_MUX_CLK(emc_clk, "emc-clk", emc_clk_parents, 0x220,
+			0, 3, SC9863A_MUX_FLAG);
+
+static const char * const aon_apb_parents[] = { "rco-4m",	"rco-25m",
+						"ext-26m",	"twpll-96m",
+						"rco-100m",	"twpll-128m" };
+static SPRD_COMP_CLK(aon_apb, "aon-apb", aon_apb_parents, 0x224,
+		     0, 3, 8, 2, 0);
+
+static const char * const adi_parents[] = { "rco-4m", "rco-25m", "ext-26m",
+					    "twpll-38m4", "twpll-51m2" };
+static SPRD_MUX_CLK(adi_clk, "adi-clk", adi_parents, 0x228,
+			0, 3, SC9863A_MUX_FLAG);
+
+static const char * const aux_parents[] = { "ext-32k", "rpll-26m", "ext-26m" };
+static SPRD_COMP_CLK(aux0_clk, "aux0-clk", aux_parents, 0x22c,
+		     0, 5, 8, 4, 0);
+static SPRD_COMP_CLK(aux1_clk, "aux1-clk", aux_parents, 0x230,
+		     0, 5, 8, 4, 0);
+static SPRD_COMP_CLK(aux2_clk, "aux2-clk", aux_parents, 0x234,
+		     0, 5, 8, 4, 0);
+static SPRD_COMP_CLK(probe_clk, "probe-clk", aux_parents, 0x238,
+		     0, 5, 8, 4, 0);
+
+static const char * const pwm_parents[] = { "ext-32k", "rpll-26m",
+					"ext-26m", "twpll-48m" };
+static SPRD_MUX_CLK(pwm0_clk, "pwm0-clk", pwm_parents, 0x23c,
+			0, 2, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK(pwm1_clk, "pwm1-clk", pwm_parents, 0x240,
+			0, 2, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK(pwm2_clk, "pwm2-clk", pwm_parents, 0x244,
+			0, 2, SC9863A_MUX_FLAG);
+
+static const char * const aon_thm_parents[] = { "ext-32k", "clk-250k" };
+static SPRD_MUX_CLK(aon_thm_clk, "aon-thm-clk", aon_thm_parents, 0x25c,
+		    0, 1, SC9863A_MUX_FLAG);
+
+static const char * const audif_parents[] = { "ext-26m", "twpll-38m4",
+					      "twpll-51m2" };
+static SPRD_MUX_CLK(audif_clk, "audif-clk", audif_parents, 0x264,
+		    0, 2, SC9863A_MUX_FLAG);
+
+static const char * const cpu_dap_parents[] = { "rco-4m", "rco-25m", "ext-26m",
+						"twpll-76m8", "rco-100m",
+						"twpll-128m", "twpll-153m6" };
+static SPRD_MUX_CLK(cpu_dap_clk, "cpu-dap-clk", cpu_dap_parents, 0x26c,
+		    0, 3, SC9863A_MUX_FLAG);
+
+static const char * const cpu_ts_parents[] = { "ext-32k", "ext-26m",
+					       "twpll-128m", "twpll-153m6" };
+static SPRD_MUX_CLK(cpu_ts_clk, "cpu-ts-clk", cpu_ts_parents, 0x274,
+		    0, 2, SC9863A_MUX_FLAG);
+
+static const char * const djtag_tck_parents[] = { "rco-4m", "ext-26m" };
+static SPRD_MUX_CLK(djtag_tck_clk, "djtag-tck-clk", djtag_tck_parents, 0x28c,
+			0, 1, SC9863A_MUX_FLAG);
+
+static const char * const emc_ref_parents[] = { "clk-6m5", "clk-13m",
+						"ext-26m" };
+static SPRD_MUX_CLK(emc_ref_clk, "emc-ref-clk", emc_ref_parents, 0x29c,
+			0, 2, SC9863A_MUX_FLAG);
+
+static const char * const cssys_parents[] = { "rco-4m", "ext-26m", "twpll-96m",
+					      "rco-100m", "twpll-128m",
+					      "twpll-153m6", "twpll-384m",
+					      "twpll-512m", "mpll2-675m" };
+static SPRD_COMP_CLK(cssys_clk,	"cssys-clk", cssys_parents, 0x2a0,
+		     0, 4, 8, 2, 0);
+
+static const char * const aon_pmu_parents[] = { "ext-32k", "rco-4m", "ext-4m" };
+static SPRD_MUX_CLK(aon_pmu_clk, "aon-pmu-clk", aon_pmu_parents, 0x2a8,
+			0, 2, SC9863A_MUX_FLAG);
+
+static const char * const pmu_26m_parents[] = { "rco-4m", "rco-25m",
+						"ext-26m" };
+static SPRD_MUX_CLK(pmu_26m_clk, "26m-pmu-clk", pmu_26m_parents, 0x2ac,
+			0, 2, SC9863A_MUX_FLAG);
+
+static const char * const aon_tmr_parents[] = { "rco-4m", "ext-26m" };
+static SPRD_MUX_CLK(aon_tmr_clk, "aon-tmr-clk", aon_tmr_parents, 0x2b0,
+			0, 1, SC9863A_MUX_FLAG);
+
+static const char * const power_cpu_parents[] = { "ext-26m", "rco-25m",
+						  "rco-100m", "twpll-128m" };
+static SPRD_MUX_CLK(power_cpu_clk, "power-cpu-clk", power_cpu_parents, 0x2c4,
+			0, 2, SC9863A_MUX_FLAG);
+
+static const char * const ap_axi_parents[] = { "ext-26m", "twpll-76m8",
+					       "twpll-128m", "twpll-256m" };
+static SPRD_MUX_CLK(ap_axi, "ap-axi", ap_axi_parents, 0x2c8,
+		    0, 2, SC9863A_MUX_FLAG);
+
+static const char * const sdio_parents[] = { "ext-26m", "twpll-307m2",
+					     "twpll-384m", "rpll-390m",
+					     "dpll1-400m", "lpll-409m6" };
+static SPRD_MUX_CLK(sdio0_2x, "sdio0-2x", sdio_parents, 0x2cc,
+			0, 3, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK(sdio1_2x, "sdio1-2x", sdio_parents, 0x2d4,
+			0, 3, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK(sdio2_2x, "sdio2-2x", sdio_parents, 0x2dc,
+			0, 3, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK(emmc_2x, "emmc-2x", sdio_parents, 0x2e4,
+			0, 3, SC9863A_MUX_FLAG);
+
+static const char * const dpu_parents[] = { "twpll-153m6", "twpll-192m",
+					    "twpll-256m", "twpll-384m"};
+static SPRD_MUX_CLK(dpu_clk, "dpu", dpu_parents, 0x2f4,
+			0, 2, SC9863A_MUX_FLAG);
+
+static const char * const dpu_dpi_parents[] = { "twpll-128m", "twpll-153m6",
+					    "twpll-192m" };
+static SPRD_COMP_CLK(dpu_dpi,	"dpu-dpi", dpu_dpi_parents, 0x2f8,
+		     0, 2, 8, 4, 0);
+
+static const char * const otg_ref_parents[] = { "twpll-12m", "ext-26m" };
+static SPRD_MUX_CLK(otg_ref_clk, "otg-ref-clk", otg_ref_parents, 0x308,
+			0, 1, SC9863A_MUX_FLAG);
+
+static const char * const sdphy_apb_parents[] = { "ext-26m", "twpll-48m" };
+static SPRD_MUX_CLK(sdphy_apb_clk, "sdphy-apb-clk", sdphy_apb_parents, 0x330,
+			0, 1, SC9863A_MUX_FLAG);
+
+static const char * const alg_io_apb_parents[] = { "rco-4m", "ext-26m",
+						   "twpll-48m", "twpll-96m" };
+static SPRD_MUX_CLK(alg_io_apb_clk, "alg-io-apb-clk", alg_io_apb_parents, 0x33c,
+			0, 1, SC9863A_MUX_FLAG);
+
+static const char * const gpu_parents[] = { "twpll-153m6", "twpll-192m",
+						 "twpll-256m", "twpll-307m2",
+						 "twpll-384m", "twpll-512m",
+						 "gpll" };
+static SPRD_COMP_CLK(gpu_core, "gpu-core", gpu_parents, 0x344,
+		     0, 3, 8, 2, 0);
+static SPRD_COMP_CLK(gpu_soc, "gpu-soc", gpu_parents, 0x348,
+		     0, 3, 8, 2, 0);
+
+static const char * const mm_emc_parents[] = { "ext-26m", "twpll-384m",
+					    "isppll-468m", "twpll-512m"};
+static SPRD_MUX_CLK(mm_emc, "mm-emc", mm_emc_parents, 0x350,
+			0, 2, SC9863A_MUX_FLAG);
+
+static const char * const mm_ahb_parents[] = { "ext-26m", "twpll-96m",
+					    "twpll-128m", "twpll-153m6"};
+static SPRD_MUX_CLK(mm_ahb, "mm-ahb", mm_ahb_parents, 0x354,
+			0, 2, SC9863A_MUX_FLAG);
+
+static const char * const bpc_clk_parents[] = { "twpll-192m", "twpll-307m2",
+					    "twpll-384m", "isppll-468m",
+					    "dpll0-622m3" };
+static SPRD_MUX_CLK(bpc_clk, "bpc-clk", bpc_clk_parents, 0x358,
+			0, 3, SC9863A_MUX_FLAG);
+
+static const char * const dcam_if_parents[] = { "twpll-192m", "twpll-256m",
+						"twpll-307m2", "twpll-384m" };
+static SPRD_MUX_CLK(dcam_if_clk, "dcam-if-clk", dcam_if_parents, 0x35c,
+			0, 2, SC9863A_MUX_FLAG);
+
+static const char * const isp_parents[] = { "twpll-128m", "twpll-256m",
+					    "twpll-307m2", "twpll-384m",
+					    "isppll-468m" };
+static SPRD_MUX_CLK(isp_clk, "isp-clk", isp_parents, 0x360,
+			0, 3, SC9863A_MUX_FLAG);
+
+static const char * const jpg_parents[] = { "twpll-76m8", "twpll-128m",
+					    "twpll-256m", "twpll-307m2" };
+static SPRD_MUX_CLK(jpg_clk, "jpg-clk", jpg_parents, 0x364,
+			0, 2, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK(cpp_clk, "cpp-clk", jpg_parents, 0x368,
+			0, 2, SC9863A_MUX_FLAG);
+
+static const char * const sensor_parents[] = { "ext-26m", "twpll-48m",
+					"twpll-76m8", "twpll-96m" };
+static SPRD_COMP_CLK(sensor0_clk, "sensor0-clk", sensor_parents, 0x36c,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(sensor1_clk, "sensor1-clk", sensor_parents, 0x370,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(sensor2_clk, "sensor2-clk", sensor_parents, 0x374,
+		     0, 2, 8, 3, 0);
+
+static const char * const mm_vemc_parents[] = { "ext-26m", "twpll-307m2",
+					    "twpll-384m", "isppll-468m"};
+static SPRD_MUX_CLK(mm_vemc, "mm-vemc", mm_vemc_parents, 0x378,
+			0, 2, SC9863A_MUX_FLAG);
+
+static SPRD_MUX_CLK(mm_vahb, "mm-vahb", mm_ahb_parents, 0x37c,
+			0, 2, SC9863A_MUX_FLAG);
+
+static const char * const vsp_parents[] = { "twpll-76m8", "twpll-128m",
+					    "twpll-256m", "twpll-307m2",
+					    "twpll-384m"};
+static SPRD_MUX_CLK(clk_vsp, "vsp-clk", vsp_parents, 0x380,
+			0, 3, SC9863A_MUX_FLAG);
+
+static const char * const core_parents[] = { "ext-26m", "twpll-512m",
+					     "twpll-768m", "lpll", "dpll0",
+					     "mpll2", "mpll0", "mpll1" };
+static SPRD_COMP_CLK(core0_clk, "core0-clk", core_parents, 0xa20,
+		     0, 3, 8, 3, 0);
+static SPRD_COMP_CLK(core1_clk, "core1-clk", core_parents, 0xa24,
+		     0, 3, 8, 3, 0);
+static SPRD_COMP_CLK(core2_clk, "core2-clk", core_parents, 0xa28,
+		     0, 3, 8, 3, 0);
+static SPRD_COMP_CLK(core3_clk, "core3-clk", core_parents, 0xa2c,
+		     0, 3, 8, 3, 0);
+static SPRD_COMP_CLK(core4_clk, "core4-clk", core_parents, 0xa30,
+		     0, 3, 8, 3, 0);
+static SPRD_COMP_CLK(core5_clk, "core5-clk", core_parents, 0xa34,
+		     0, 3, 8, 3, 0);
+static SPRD_COMP_CLK(core6_clk, "core6-clk", core_parents, 0xa38,
+		     0, 3, 8, 3, 0);
+static SPRD_COMP_CLK(core7_clk, "core7-clk", core_parents, 0xa3c,
+		     0, 3, 8, 3, 0);
+static SPRD_COMP_CLK(scu_clk, "scu-clk", core_parents, 0xa40,
+		     0, 3, 8, 3, 0);
+static SPRD_DIV_CLK(ace_clk, "ace-clk", "scu-clk", 0xa44,
+		    8, 3, 0);
+static SPRD_DIV_CLK(axi_periph_clk, "axi-periph-clk", "scu-clk", 0xa48,
+		    8, 3, 0);
+static SPRD_DIV_CLK(axi_acp_clk, "axi-acp-clk", "scu-clk", 0xa4c,
+		    8, 3, 0);
+
+static const char * const atb_parents[] = { "ext-26m", "twpll-384m",
+					    "twpll-512m", "mpll2" };
+static SPRD_COMP_CLK(atb_clk, "atb-clk", atb_parents, 0xa50,
+		     0, 2, 8, 3, 0);
+static SPRD_DIV_CLK(debug_apb_clk, "debug-apb-clk", "atb-clk", 0xa54,
+		    8, 3, 0);
+
+static const char * const gic_parents[] = { "ext-26m", "twpll-153m6",
+					    "twpll-384m", "twpll-512m" };
+static SPRD_COMP_CLK(gic_clk, "gic-clk", gic_parents, 0xa58,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(periph_clk, "periph-clk", gic_parents, 0xa5c,
+		     0, 2, 8, 3, 0);
+
+static struct sprd_clk_common *sc9863a_aon_clks[] = {
+	/* address base is 0x402d0000 */
+	&emc_clk.common,
+	&aon_apb.common,
+	&adi_clk.common,
+	&aux0_clk.common,
+	&aux1_clk.common,
+	&aux2_clk.common,
+	&probe_clk.common,
+	&pwm0_clk.common,
+	&pwm1_clk.common,
+	&pwm2_clk.common,
+	&aon_thm_clk.common,
+	&audif_clk.common,
+	&cpu_dap_clk.common,
+	&cpu_ts_clk.common,
+	&djtag_tck_clk.common,
+	&emc_ref_clk.common,
+	&cssys_clk.common,
+	&aon_pmu_clk.common,
+	&pmu_26m_clk.common,
+	&aon_tmr_clk.common,
+	&power_cpu_clk.common,
+	&ap_axi.common,
+	&sdio0_2x.common,
+	&sdio1_2x.common,
+	&sdio2_2x.common,
+	&emmc_2x.common,
+	&dpu_clk.common,
+	&dpu_dpi.common,
+	&otg_ref_clk.common,
+	&sdphy_apb_clk.common,
+	&alg_io_apb_clk.common,
+	&gpu_core.common,
+	&gpu_soc.common,
+	&mm_emc.common,
+	&mm_ahb.common,
+	&bpc_clk.common,
+	&dcam_if_clk.common,
+	&isp_clk.common,
+	&jpg_clk.common,
+	&cpp_clk.common,
+	&sensor0_clk.common,
+	&sensor1_clk.common,
+	&sensor2_clk.common,
+	&mm_vemc.common,
+	&mm_vahb.common,
+	&clk_vsp.common,
+	&core0_clk.common,
+	&core1_clk.common,
+	&core2_clk.common,
+	&core3_clk.common,
+	&core4_clk.common,
+	&core5_clk.common,
+	&core6_clk.common,
+	&core7_clk.common,
+	&scu_clk.common,
+	&ace_clk.common,
+	&axi_periph_clk.common,
+	&axi_acp_clk.common,
+	&atb_clk.common,
+	&debug_apb_clk.common,
+	&gic_clk.common,
+	&periph_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_aon_clk_hws = {
+	.hws	= {
+		[CLK_13M]		= &clk_13m.hw,
+		[CLK_6M5]		= &clk_6m5.hw,
+		[CLK_4M3]		= &clk_4m3.hw,
+		[CLK_2M]		= &clk_2m.hw,
+		[CLK_250K]		= &clk_250k.hw,
+		[CLK_RCO_25M]		= &rco_25m.hw,
+		[CLK_RCO_4M]		= &rco_4m.hw,
+		[CLK_RCO_2M]		= &rco_2m.hw,
+		[CLK_EMC]		= &emc_clk.common.hw,
+		[CLK_AON_APB]		= &aon_apb.common.hw,
+		[CLK_ADI]		= &adi_clk.common.hw,
+		[CLK_AUX0]		= &aux0_clk.common.hw,
+		[CLK_AUX1]		= &aux1_clk.common.hw,
+		[CLK_AUX2]		= &aux2_clk.common.hw,
+		[CLK_PROBE]		= &probe_clk.common.hw,
+		[CLK_PWM0]		= &pwm0_clk.common.hw,
+		[CLK_PWM1]		= &pwm1_clk.common.hw,
+		[CLK_PWM2]		= &pwm2_clk.common.hw,
+		[CLK_AON_THM]		= &aon_thm_clk.common.hw,
+		[CLK_AUDIF]		= &audif_clk.common.hw,
+		[CLK_CPU_DAP]		= &cpu_dap_clk.common.hw,
+		[CLK_CPU_TS]		= &cpu_ts_clk.common.hw,
+		[CLK_DJTAG_TCK]		= &djtag_tck_clk.common.hw,
+		[CLK_EMC_REF]		= &emc_ref_clk.common.hw,
+		[CLK_CSSYS]		= &cssys_clk.common.hw,
+		[CLK_AON_PMU]		= &aon_pmu_clk.common.hw,
+		[CLK_PMU_26M]		= &pmu_26m_clk.common.hw,
+		[CLK_AON_TMR]		= &aon_tmr_clk.common.hw,
+		[CLK_POWER_CPU]		= &power_cpu_clk.common.hw,
+		[CLK_AP_AXI]		= &ap_axi.common.hw,
+		[CLK_SDIO0_2X]		= &sdio0_2x.common.hw,
+		[CLK_SDIO1_2X]		= &sdio1_2x.common.hw,
+		[CLK_SDIO2_2X]		= &sdio2_2x.common.hw,
+		[CLK_EMMC_2X]		= &emmc_2x.common.hw,
+		[CLK_DPU]		= &dpu_clk.common.hw,
+		[CLK_DPU_DPI]		= &dpu_dpi.common.hw,
+		[CLK_OTG_REF]		= &otg_ref_clk.common.hw,
+		[CLK_SDPHY_APB]		= &sdphy_apb_clk.common.hw,
+		[CLK_ALG_IO_APB]	= &alg_io_apb_clk.common.hw,
+		[CLK_GPU_CORE]		= &gpu_core.common.hw,
+		[CLK_GPU_SOC]		= &gpu_soc.common.hw,
+		[CLK_MM_EMC]		= &mm_emc.common.hw,
+		[CLK_MM_AHB]		= &mm_ahb.common.hw,
+		[CLK_BPC]		= &bpc_clk.common.hw,
+		[CLK_DCAM_IF]		= &dcam_if_clk.common.hw,
+		[CLK_ISP]		= &isp_clk.common.hw,
+		[CLK_JPG]		= &jpg_clk.common.hw,
+		[CLK_CPP]		= &cpp_clk.common.hw,
+		[CLK_SENSOR0]		= &sensor0_clk.common.hw,
+		[CLK_SENSOR1]		= &sensor1_clk.common.hw,
+		[CLK_SENSOR2]		= &sensor2_clk.common.hw,
+		[CLK_MM_VEMC]		= &mm_vemc.common.hw,
+		[CLK_MM_VAHB]		= &mm_vahb.common.hw,
+		[CLK_VSP]		= &clk_vsp.common.hw,
+		[CLK_CORE0]		= &core0_clk.common.hw,
+		[CLK_CORE1]		= &core1_clk.common.hw,
+		[CLK_CORE2]		= &core2_clk.common.hw,
+		[CLK_CORE3]		= &core3_clk.common.hw,
+		[CLK_CORE4]		= &core4_clk.common.hw,
+		[CLK_CORE5]		= &core5_clk.common.hw,
+		[CLK_CORE6]		= &core6_clk.common.hw,
+		[CLK_CORE7]		= &core7_clk.common.hw,
+		[CLK_SCU]		= &scu_clk.common.hw,
+		[CLK_ACE]		= &ace_clk.common.hw,
+		[CLK_AXI_PERIPH]	= &axi_periph_clk.common.hw,
+		[CLK_AXI_ACP]		= &axi_acp_clk.common.hw,
+		[CLK_ATB]		= &atb_clk.common.hw,
+		[CLK_DEBUG_APB]		= &debug_apb_clk.common.hw,
+		[CLK_GIC]		= &gic_clk.common.hw,
+		[CLK_PERIPH]		= &periph_clk.common.hw,
+	},
+	.num	= CLK_AON_CLK_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_aon_clk_desc = {
+	.clk_clks	= sc9863a_aon_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_aon_clks),
+	.hw_clks	= &sc9863a_aon_clk_hws,
+};
+
+static SPRD_SC_GATE_CLK(otg_eb, "otg-eb", "ap-axi", 0x0, 0x1000,
+			BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dma_eb, "dma-eb", "ap-axi", 0x0, 0x1000,
+			BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ce_eb, "ce-eb", "ap-axi", 0x0, 0x1000,
+			BIT(6), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(nandc_eb, "nandc-eb", "ap-axi", 0x0, 0x1000,
+			BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sdio0_eb, "sdio0-eb", "ap-axi", 0x0, 0x1000,
+			BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sdio1_eb, "sdio1-eb", "ap-axi", 0x0, 0x1000,
+			BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sdio2_eb, "sdio2-eb", "ap-axi", 0x0, 0x1000,
+			BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(emmc_eb, "emmc-eb", "ap-axi", 0x0, 0x1000,
+			BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(emmc_32k_eb, "emmc-32k-eb", "ap-axi", 0x0, 0x1000,
+			BIT(27), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sdio0_32k_eb, "sdio0-32k-eb", "ap-axi", 0x0, 0x1000,
+			BIT(28), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sdio1_32k_eb, "sdio1-32k-eb", "ap-axi", 0x0, 0x1000,
+			BIT(29), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sdio2_32k_eb, "sdio2-32k-eb", "ap-axi", 0x0, 0x1000,
+			BIT(30), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(nandc_26m_eb, "nandc-26m-eb", "ap-axi", 0x0, 0x1000,
+			BIT(31), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dma_eb2, "dma-eb2", "ap-axi", 0x18, 0x1000,
+			BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ce_eb2, "ce-eb2", "ap-axi", 0x18, 0x1000,
+			BIT(1), CLK_IGNORE_UNUSED, 0);
+
+static struct sprd_clk_common *sc9863a_apahb_gate_clks[] = {
+	/* address base is 0x20e00000 */
+	&otg_eb.common,
+	&dma_eb.common,
+	&ce_eb.common,
+	&nandc_eb.common,
+	&sdio0_eb.common,
+	&sdio1_eb.common,
+	&sdio2_eb.common,
+	&emmc_eb.common,
+	&emmc_32k_eb.common,
+	&sdio0_32k_eb.common,
+	&sdio1_32k_eb.common,
+	&sdio2_32k_eb.common,
+	&nandc_26m_eb.common,
+	&dma_eb2.common,
+	&ce_eb2.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_apahb_gate_hws = {
+	.hws	= {
+		[CLK_OTG_EB]		= &otg_eb.common.hw,
+		[CLK_DMA_EB]		= &dma_eb.common.hw,
+		[CLK_CE_EB]		= &ce_eb.common.hw,
+		[CLK_NANDC_EB]		= &nandc_eb.common.hw,
+		[CLK_SDIO0_EB]		= &sdio0_eb.common.hw,
+		[CLK_SDIO1_EB]		= &sdio1_eb.common.hw,
+		[CLK_SDIO2_EB]		= &sdio2_eb.common.hw,
+		[CLK_EMMC_EB]		= &emmc_eb.common.hw,
+		[CLK_EMMC_32K_EB]	= &emmc_32k_eb.common.hw,
+		[CLK_SDIO0_32K_EB]	= &sdio0_32k_eb.common.hw,
+		[CLK_SDIO1_32K_EB]	= &sdio1_32k_eb.common.hw,
+		[CLK_SDIO2_32K_EB]	= &sdio2_32k_eb.common.hw,
+		[CLK_NANDC_26M_EB]	= &nandc_26m_eb.common.hw,
+		[CLK_DMA_EB2]		= &dma_eb2.common.hw,
+		[CLK_CE_EB2]		= &ce_eb2.common.hw,
+	},
+	.num	= CLK_AP_AHB_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_apahb_gate_desc = {
+	.clk_clks	= sc9863a_apahb_gate_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_apahb_gate_clks),
+	.hw_clks	= &sc9863a_apahb_gate_hws,
+};
+
+/* aon gate clocks */
+static SPRD_SC_GATE_CLK(adc_eb,	"adc-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(fm_eb,	"fm-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(tpc_eb,	"tpc-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gpio_eb, "gpio-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pwm0_eb,	"pwm0-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pwm1_eb,	"pwm1-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pwm2_eb,	"pwm2-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(6), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pwm3_eb,	"pwm3-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(kpd_eb,		"kpd-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_syst_eb,	"aon-syst-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_syst_eb,	"ap-syst-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_tmr_eb,	"aon-tmr-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_tmr0_eb,	"ap-tmr0-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(12), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(efuse_eb,	"efuse-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(eic_eb,		"eic-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(intc_eb,	"intc-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(15), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(adi_eb,		"adi-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(audif_eb,	"audif-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(17), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aud_eb,		"aud-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(vbc_eb,		"vbc-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(19), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pin_eb,		"pin-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(20), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ipi_eb,		"ipi-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(21), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(splk_eb,	"splk-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(22), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mspi_eb,	"mspi-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(23), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_wdg_eb,	"ap-wdg-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(24), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mm_eb,		"mm-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(25), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_apb_ckg_eb,	"aon-apb-ckg-eb", "aon-apb", 0x0,
+		     0x1000, BIT(26), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ca53_ts0_eb, "ca53-ts0-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(28), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ca53_ts1_eb, "ca53-ts1-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(29), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ca53_dap_eb, "ca53-dap-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(30), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c_eb,		"i2c-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(31), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pmu_eb,		"pmu-eb",		"aon-apb",
+			0x4, 0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(thm_eb,		"thm-eb",		"aon-apb",
+			0x4, 0x1000, BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aux0_eb,	"aux0-eb",		"aon-apb",
+			0x4, 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aux1_eb,	"aux1-eb",		"aon-apb",
+			0x4, 0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aux2_eb,	"aux2-eb",		"aon-apb",
+			0x4, 0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(probe_eb,	"probe-eb",		"aon-apb",
+			0x4, 0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(emc_ref_eb,	"emc-ref-eb",		"aon-apb",
+			0x4, 0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ca53_wdg_eb,	"ca53-wdg-eb",		"aon-apb",
+			0x4, 0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_tmr1_eb,	"ap-tmr1-eb",		"aon-apb",
+			0x4, 0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_tmr2_eb,	"ap-tmr2-eb",		"aon-apb",
+			0x4, 0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(disp_emc_eb,	"disp-emc-eb",		"aon-apb",
+			0x4, 0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(zip_emc_eb,	"zip-emc-eb",		"aon-apb",
+			0x4, 0x1000, BIT(12), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gsp_emc_eb,	"gsp-emc-eb",		"aon-apb",
+			0x4, 0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mm_vsp_eb,	"mm-vsp-eb",		"aon-apb",
+			0x4, 0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mdar_eb,	"mdar-eb",		"aon-apb",
+			0x4, 0x1000, BIT(17), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(rtc4m0_cal_eb,	"rtc4m0-cal-eb",	"aon-apb",
+			0x4, 0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(rtc4m1_cal_eb,	"rtc4m1-cal-eb",	"aon-apb",
+			0x4, 0x1000, BIT(19), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(djtag_eb,	"djtag-eb",		"aon-apb",
+			0x4, 0x1000, BIT(20), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mbox_eb,	"mbox-eb",		"aon-apb",
+			0x4, 0x1000, BIT(21), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_dma_eb,	"aon-dma-eb",		"aon-apb",
+			0x4, 0x1000, BIT(22), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_apb_def_eb,	"aon-apb-def-eb",	"aon-apb",
+			0x4, 0x1000, BIT(25), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(orp_jtag_eb,	"orp-jtag-eb",		"aon-apb",
+			0x4, 0x1000, BIT(27), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dbg_eb,		"dbg-eb",		"aon-apb",
+			0x4, 0x1000, BIT(28), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dbg_emc_eb,	"dbg-emc-eb",		"aon-apb",
+			0x4, 0x1000, BIT(29), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(cross_trig_eb,	"cross-trig-eb",	"aon-apb",
+			0x4, 0x1000, BIT(30), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(serdes_dphy_eb,	"serdes-dphy-eb",	"aon-apb",
+			0x4, 0x1000, BIT(31), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(arch_rtc_eb,	"arch-rtc-eb",	"aon-apb",
+			0x10, 0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(kpd_rtc_eb,	"kpd-rtc-eb",	"aon-apb",
+			0x10, 0x1000, BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_syst_rtc_eb, "aon-syst-rtc-eb", "aon-apb",
+			0x10, 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_syst_rtc_eb,	"ap-syst-rtc-eb", "aon-apb",
+			0x10, 0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_tmr_rtc_eb,	"aon-tmr-rtc-eb", "aon-apb",
+			0x10, 0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_tmr0_rtc_eb,	"ap-tmr0-rtc-eb", "aon-apb",
+			0x10, 0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(eic_rtc_eb, "eic-rtc-eb",	"aon-apb",
+			0x10, 0x1000, BIT(6), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(eic_rtcdv5_eb,	"eic-rtcdv5-eb", "aon-apb",
+			0x10, 0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_wdg_rtc_eb,	"ap-wdg-rtc-eb", "aon-apb",
+			0x10, 0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ca53_wdg_rtc_eb, "ca53-wdg-rtc-eb", "aon-apb",
+			0x10, 0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(thm_rtc_eb, "thm-rtc-eb",	"aon-apb",
+			0x10, 0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(athma_rtc_eb, "athma-rtc-eb",	"aon-apb",
+			0x10, 0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gthma_rtc_eb,	"gthma-rtc-eb",	"aon-apb",
+			0x10, 0x1000, BIT(12), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(athma_rtc_a_eb,	"athma-rtc-a-eb", "aon-apb",
+			0x10, 0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gthma_rtc_a_eb, "gthma-rtc-a-eb", "aon-apb",
+			0x10, 0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_tmr1_rtc_eb, "ap-tmr1-rtc-eb", "aon-apb",
+			0x10, 0x1000, BIT(15), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_tmr2_rtc_eb,	"ap-tmr2-rtc-eb", "aon-apb",
+			0x10, 0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dxco_lc_rtc_eb, "dxco-lc-rtc-eb", "aon-apb",
+			0x10, 0x1000, BIT(17), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(bb_cal_rtc_eb, "bb-cal-rtc-eb", "aon-apb",
+			0x10, 0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gpu_eb,		"gpu-eb",	"aon-apb", 0x50,
+		     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(disp_eb,	"disp-eb",	"aon-apb", 0x50,
+		     0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mm_emc_eb,		"mm-emc-eb",	"aon-apb", 0x50,
+		     0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(power_cpu_eb,	"power-cpu-eb",	"aon-apb", 0x50,
+		     0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(hw_i2c_eb,		"hw-i2c-eb",	"aon-apb", 0x50,
+		     0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mm_vsp_emc_eb, "mm-vsp-emc-eb",	"aon-apb", 0x50,
+		     0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(vsp_eb,		"vsp-eb",	"aon-apb", 0x50,
+		     0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(cssys_eb, "cssys-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dmc_eb, "dmc-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(rosc_eb, "rosc-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(s_d_cfg_eb, "s-d-cfg-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(s_d_ref_eb, "s-d-ref-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(b_dma_eb, "b-dma-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(anlg_eb, "anlg-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(anlg_apb_eb, "anlg-apb-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(bsmtmr_eb, "bsmtmr-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_axi_eb, "ap-axi-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(15), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc0_eb, "ap-intc0-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc1_eb, "ap-intc1-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(17), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc2_eb, "ap-intc2-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc3_eb, "ap-intc3-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(19), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc4_eb, "ap-intc4-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(20), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc5_eb, "ap-intc5-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(21), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(scc_eb, "scc-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(22), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dphy_cfg_eb, "dphy-cfg-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(23), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dphy_ref_eb, "dphy-ref-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(24), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(cphy_cfg_eb, "cphy-cfg-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(25), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(otg_ref_eb, "otg-ref-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(26), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(serdes_eb, "serdes-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(27), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_ap_emc_eb, "aon-ap-emc-eb", "aon-apb", 0xb0,
+		     0x1000, BIT(28), CLK_IGNORE_UNUSED, 0);
+static struct sprd_clk_common *sc9863a_aonapb_gate_clks[] = {
+	/* address base is 0x402e0000 */
+	&adc_eb.common,
+	&fm_eb.common,
+	&tpc_eb.common,
+	&gpio_eb.common,
+	&pwm0_eb.common,
+	&pwm1_eb.common,
+	&pwm2_eb.common,
+	&pwm3_eb.common,
+	&kpd_eb.common,
+	&aon_syst_eb.common,
+	&ap_syst_eb.common,
+	&aon_tmr_eb.common,
+	&ap_tmr0_eb.common,
+	&efuse_eb.common,
+	&eic_eb.common,
+	&intc_eb.common,
+	&adi_eb.common,
+	&audif_eb.common,
+	&aud_eb.common,
+	&vbc_eb.common,
+	&pin_eb.common,
+	&ipi_eb.common,
+	&splk_eb.common,
+	&mspi_eb.common,
+	&ap_wdg_eb.common,
+	&mm_eb.common,
+	&aon_apb_ckg_eb.common,
+	&ca53_ts0_eb.common,
+	&ca53_ts1_eb.common,
+	&ca53_dap_eb.common,
+	&i2c_eb.common,
+	&pmu_eb.common,
+	&thm_eb.common,
+	&aux0_eb.common,
+	&aux1_eb.common,
+	&aux2_eb.common,
+	&probe_eb.common,
+	&emc_ref_eb.common,
+	&ca53_wdg_eb.common,
+	&ap_tmr1_eb.common,
+	&ap_tmr2_eb.common,
+	&disp_emc_eb.common,
+	&zip_emc_eb.common,
+	&gsp_emc_eb.common,
+	&mm_vsp_eb.common,
+	&mdar_eb.common,
+	&rtc4m0_cal_eb.common,
+	&rtc4m1_cal_eb.common,
+	&djtag_eb.common,
+	&mbox_eb.common,
+	&aon_dma_eb.common,
+	&aon_apb_def_eb.common,
+	&orp_jtag_eb.common,
+	&dbg_eb.common,
+	&dbg_emc_eb.common,
+	&cross_trig_eb.common,
+	&serdes_dphy_eb.common,
+	&arch_rtc_eb.common,
+	&kpd_rtc_eb.common,
+	&aon_syst_rtc_eb.common,
+	&ap_syst_rtc_eb.common,
+	&aon_tmr_rtc_eb.common,
+	&ap_tmr0_rtc_eb.common,
+	&eic_rtc_eb.common,
+	&eic_rtcdv5_eb.common,
+	&ap_wdg_rtc_eb.common,
+	&ca53_wdg_rtc_eb.common,
+	&thm_rtc_eb.common,
+	&athma_rtc_eb.common,
+	&gthma_rtc_eb.common,
+	&athma_rtc_a_eb.common,
+	&gthma_rtc_a_eb.common,
+	&ap_tmr1_rtc_eb.common,
+	&ap_tmr2_rtc_eb.common,
+	&dxco_lc_rtc_eb.common,
+	&bb_cal_rtc_eb.common,
+	&gpu_eb.common,
+	&disp_eb.common,
+	&mm_emc_eb.common,
+	&power_cpu_eb.common,
+	&hw_i2c_eb.common,
+	&mm_vsp_emc_eb.common,
+	&vsp_eb.common,
+	&cssys_eb.common,
+	&dmc_eb.common,
+	&rosc_eb.common,
+	&s_d_cfg_eb.common,
+	&s_d_ref_eb.common,
+	&b_dma_eb.common,
+	&anlg_eb.common,
+	&anlg_apb_eb.common,
+	&bsmtmr_eb.common,
+	&ap_axi_eb.common,
+	&ap_intc0_eb.common,
+	&ap_intc1_eb.common,
+	&ap_intc2_eb.common,
+	&ap_intc3_eb.common,
+	&ap_intc4_eb.common,
+	&ap_intc5_eb.common,
+	&scc_eb.common,
+	&dphy_cfg_eb.common,
+	&dphy_ref_eb.common,
+	&cphy_cfg_eb.common,
+	&otg_ref_eb.common,
+	&serdes_eb.common,
+	&aon_ap_emc_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_aonapb_gate_hws = {
+	.hws	= {
+		[CLK_ADC_EB]		= &adc_eb.common.hw,
+		[CLK_FM_EB]		= &fm_eb.common.hw,
+		[CLK_TPC_EB]		= &tpc_eb.common.hw,
+		[CLK_GPIO_EB]		= &gpio_eb.common.hw,
+		[CLK_PWM0_EB]		= &pwm0_eb.common.hw,
+		[CLK_PWM1_EB]		= &pwm1_eb.common.hw,
+		[CLK_PWM2_EB]		= &pwm2_eb.common.hw,
+		[CLK_PWM3_EB]		= &pwm3_eb.common.hw,
+		[CLK_KPD_EB]		= &kpd_eb.common.hw,
+		[CLK_AON_SYST_EB]	= &aon_syst_eb.common.hw,
+		[CLK_AP_SYST_EB]	= &ap_syst_eb.common.hw,
+		[CLK_AON_TMR_EB]	= &aon_tmr_eb.common.hw,
+		[CLK_AP_TMR0_EB]	= &ap_tmr0_eb.common.hw,
+		[CLK_EFUSE_EB]		= &efuse_eb.common.hw,
+		[CLK_EIC_EB]		= &eic_eb.common.hw,
+		[CLK_INTC_EB]		= &intc_eb.common.hw,
+		[CLK_ADI_EB]		= &adi_eb.common.hw,
+		[CLK_AUDIF_EB]		= &audif_eb.common.hw,
+		[CLK_AUD_EB]		= &aud_eb.common.hw,
+		[CLK_VBC_EB]		= &vbc_eb.common.hw,
+		[CLK_PIN_EB]		= &pin_eb.common.hw,
+		[CLK_IPI_EB]		= &ipi_eb.common.hw,
+		[CLK_SPLK_EB]		= &splk_eb.common.hw,
+		[CLK_MSPI_EB]		= &mspi_eb.common.hw,
+		[CLK_AP_WDG_EB]		= &ap_wdg_eb.common.hw,
+		[CLK_MM_EB]		= &mm_eb.common.hw,
+		[CLK_AON_APB_CKG_EB]	= &aon_apb_ckg_eb.common.hw,
+		[CLK_CA53_TS0_EB]	= &ca53_ts0_eb.common.hw,
+		[CLK_CA53_TS1_EB]	= &ca53_ts1_eb.common.hw,
+		[CLK_CS53_DAP_EB]	= &ca53_dap_eb.common.hw,
+		[CLK_I2C_EB]		= &i2c_eb.common.hw,
+		[CLK_PMU_EB]		= &pmu_eb.common.hw,
+		[CLK_THM_EB]		= &thm_eb.common.hw,
+		[CLK_AUX0_EB]		= &aux0_eb.common.hw,
+		[CLK_AUX1_EB]		= &aux1_eb.common.hw,
+		[CLK_AUX2_EB]		= &aux2_eb.common.hw,
+		[CLK_PROBE_EB]		= &probe_eb.common.hw,
+		[CLK_EMC_REF_EB]	= &emc_ref_eb.common.hw,
+		[CLK_CA53_WDG_EB]	= &ca53_wdg_eb.common.hw,
+		[CLK_AP_TMR1_EB]	= &ap_tmr1_eb.common.hw,
+		[CLK_AP_TMR2_EB]	= &ap_tmr2_eb.common.hw,
+		[CLK_DISP_EMC_EB]	= &disp_emc_eb.common.hw,
+		[CLK_ZIP_EMC_EB]	= &zip_emc_eb.common.hw,
+		[CLK_GSP_EMC_EB]	= &gsp_emc_eb.common.hw,
+		[CLK_MM_VSP_EB]		= &mm_vsp_eb.common.hw,
+		[CLK_MDAR_EB]		= &mdar_eb.common.hw,
+		[CLK_RTC4M0_CAL_EB]	= &rtc4m0_cal_eb.common.hw,
+		[CLK_RTC4M1_CAL_EB]	= &rtc4m1_cal_eb.common.hw,
+		[CLK_DJTAG_EB]		= &djtag_eb.common.hw,
+		[CLK_MBOX_EB]		= &mbox_eb.common.hw,
+		[CLK_AON_DMA_EB]	= &aon_dma_eb.common.hw,
+		[CLK_AON_APB_DEF_EB]	= &aon_apb_def_eb.common.hw,
+		[CLK_ORP_JTAG_EB]	= &orp_jtag_eb.common.hw,
+		[CLK_DBG_EB]		= &dbg_eb.common.hw,
+		[CLK_DBG_EMC_EB]	= &dbg_emc_eb.common.hw,
+		[CLK_CROSS_TRIG_EB]	= &cross_trig_eb.common.hw,
+		[CLK_SERDES_DPHY_EB]	= &serdes_dphy_eb.common.hw,
+		[CLK_ARCH_RTC_EB]	= &arch_rtc_eb.common.hw,
+		[CLK_KPD_RTC_EB]	= &kpd_rtc_eb.common.hw,
+		[CLK_AON_SYST_RTC_EB]	= &aon_syst_rtc_eb.common.hw,
+		[CLK_AP_SYST_RTC_EB]	= &ap_syst_rtc_eb.common.hw,
+		[CLK_AON_TMR_RTC_EB]	= &aon_tmr_rtc_eb.common.hw,
+		[CLK_AP_TMR0_RTC_EB]	= &ap_tmr0_rtc_eb.common.hw,
+		[CLK_EIC_RTC_EB]	= &eic_rtc_eb.common.hw,
+		[CLK_EIC_RTCDV5_EB]	= &eic_rtcdv5_eb.common.hw,
+		[CLK_AP_WDG_RTC_EB]	= &ap_wdg_rtc_eb.common.hw,
+		[CLK_CA53_WDG_RTC_EB]	= &ca53_wdg_rtc_eb.common.hw,
+		[CLK_THM_RTC_EB]	= &thm_rtc_eb.common.hw,
+		[CLK_ATHMA_RTC_EB]	= &athma_rtc_eb.common.hw,
+		[CLK_GTHMA_RTC_EB]	= &gthma_rtc_eb.common.hw,
+		[CLK_ATHMA_RTC_A_EB]	= &athma_rtc_a_eb.common.hw,
+		[CLK_GTHMA_RTC_A_EB]	= &gthma_rtc_a_eb.common.hw,
+		[CLK_AP_TMR1_RTC_EB]	= &ap_tmr1_rtc_eb.common.hw,
+		[CLK_AP_TMR2_RTC_EB]	= &ap_tmr2_rtc_eb.common.hw,
+		[CLK_DXCO_LC_RTC_EB]	= &dxco_lc_rtc_eb.common.hw,
+		[CLK_BB_CAL_RTC_EB]	= &bb_cal_rtc_eb.common.hw,
+		[CLK_GNU_EB]		= &gpu_eb.common.hw,
+		[CLK_DISP_EB]		= &disp_eb.common.hw,
+		[CLK_MM_EMC_EB]		= &mm_emc_eb.common.hw,
+		[CLK_POWER_CPU_EB]	= &power_cpu_eb.common.hw,
+		[CLK_HW_I2C_EB]		= &hw_i2c_eb.common.hw,
+		[CLK_MM_VSP_EMC_EB]	= &mm_vsp_emc_eb.common.hw,
+		[CLK_VSP_EB]		= &vsp_eb.common.hw,
+		[CLK_CSSYS_EB]		= &cssys_eb.common.hw,
+		[CLK_DMC_EB]		= &dmc_eb.common.hw,
+		[CLK_ROSC_EB]		= &rosc_eb.common.hw,
+		[CLK_S_D_CFG_EB]	= &s_d_cfg_eb.common.hw,
+		[CLK_S_D_REF_EB]	= &s_d_ref_eb.common.hw,
+		[CLK_B_DMA_EB]		= &b_dma_eb.common.hw,
+		[CLK_ANLG_EB]		= &anlg_eb.common.hw,
+		[CLK_ANLG_APB_EB]	= &anlg_apb_eb.common.hw,
+		[CLK_BSMTMR_EB]		= &bsmtmr_eb.common.hw,
+		[CLK_AP_AXI_EB]		= &ap_axi_eb.common.hw,
+		[CLK_AP_INTC0_EB]	= &ap_intc0_eb.common.hw,
+		[CLK_AP_INTC1_EB]	= &ap_intc1_eb.common.hw,
+		[CLK_AP_INTC2_EB]	= &ap_intc2_eb.common.hw,
+		[CLK_AP_INTC3_EB]	= &ap_intc3_eb.common.hw,
+		[CLK_AP_INTC4_EB]	= &ap_intc4_eb.common.hw,
+		[CLK_AP_INTC5_EB]	= &ap_intc5_eb.common.hw,
+		[CLK_SCC_EB]		= &scc_eb.common.hw,
+		[CLK_DPHY_CFG_EB]	= &dphy_cfg_eb.common.hw,
+		[CLK_DPHY_REF_EB]	= &dphy_ref_eb.common.hw,
+		[CLK_CPHY_CFG_EB]	= &cphy_cfg_eb.common.hw,
+		[CLK_OTG_REF_EB]	= &otg_ref_eb.common.hw,
+		[CLK_SERDES_EB]		= &serdes_eb.common.hw,
+		[CLK_AON_AP_EMC_EB]	= &aon_ap_emc_eb.common.hw,
+	},
+	.num	= CLK_AON_APB_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_aonapb_gate_desc = {
+	.clk_clks	= sc9863a_aonapb_gate_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_aonapb_gate_clks),
+	.hw_clks	= &sc9863a_aonapb_gate_hws,
+};
+
+/* mm gate clocks */
+static SPRD_SC_GATE_CLK(mahb_ckg_eb, "mahb-ckg-eb", "mm-ahb", 0x0, 0x1000,
+			BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mdcam_eb, "mdcam-eb", "mm-ahb", 0x0, 0x1000,
+			BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(misp_eb, "misp-eb", "mm-ahb", 0x0, 0x1000,
+			BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mahbcsi_eb, "mahbcsi-eb", "mm-ahb", 0x0, 0x1000,
+			BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mcsi_s_eb, "mcsi-s-eb", "mm-ahb", 0x0, 0x1000,
+			BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mcsi_t_eb, "mcsi-t-eb", "mm-ahb", 0x0, 0x1000,
+			BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_GATE_CLK(dcam_axi_eb, "dcam-axi-eb", "mm-ahb", 0x8,
+		     BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_GATE_CLK(isp_axi_eb, "isp-axi-eb", "mm-ahb", 0x8,
+		     BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_GATE_CLK(mcsi_eb,	"mcsi-eb", "mm-ahb", 0x8,
+		     BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_GATE_CLK(mcsi_s_ckg_eb, "mcsi-s-ckg-eb", "mm-ahb", 0x8,
+		     BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_GATE_CLK(mcsi_t_ckg_eb, "mcsi-t-ckg-eb", "mm-ahb", 0x8,
+		     BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_GATE_CLK(sensor0_eb, "sensor0-eb", "mm-ahb", 0x8,
+		     BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_GATE_CLK(sensor1_eb, "sensor1-eb", "mm-ahb", 0x8,
+		     BIT(6), CLK_IGNORE_UNUSED, 0);
+static SPRD_GATE_CLK(sensor2_eb, "sensor2-eb", "mm-ahb", 0x8,
+		     BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_GATE_CLK(mcphy_cfg_eb, "mcphy-cfg-eb", "mm-ahb", 0x8,
+		     BIT(8), CLK_IGNORE_UNUSED, 0);
+
+static struct sprd_clk_common *sc9863a_mm_gate_clks[] = {
+	/* address base is 0x60800000 */
+	&mahb_ckg_eb.common,
+	&mdcam_eb.common,
+	&misp_eb.common,
+	&mahbcsi_eb.common,
+	&mcsi_s_eb.common,
+	&mcsi_t_eb.common,
+	&dcam_axi_eb.common,
+	&isp_axi_eb.common,
+	&mcsi_eb.common,
+	&mcsi_s_ckg_eb.common,
+	&mcsi_t_ckg_eb.common,
+	&sensor0_eb.common,
+	&sensor1_eb.common,
+	&sensor2_eb.common,
+	&mcphy_cfg_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_mm_gate_hws = {
+	.hws	= {
+		[CLK_MAHB_CKG_EB]	= &mahb_ckg_eb.common.hw,
+		[CLK_MDCAM_EB]		= &mdcam_eb.common.hw,
+		[CLK_MISP_EB]		= &misp_eb.common.hw,
+		[CLK_MAHBCSI_EB]	= &mahbcsi_eb.common.hw,
+		[CLK_MCSI_S_EB]		= &mcsi_s_eb.common.hw,
+		[CLK_MCSI_T_EB]		= &mcsi_t_eb.common.hw,
+		[CLK_DCAM_AXI_EB]	= &dcam_axi_eb.common.hw,
+		[CLK_ISP_AXI_EB]	= &isp_axi_eb.common.hw,
+		[CLK_MCSI_EB]		= &mcsi_eb.common.hw,
+		[CLK_MCSI_S_CKG_EB]	= &mcsi_s_ckg_eb.common.hw,
+		[CLK_MCSI_T_CKG_EB]	= &mcsi_t_ckg_eb.common.hw,
+		[CLK_SENSOR0_EB]	= &sensor0_eb.common.hw,
+		[CLK_SENSOR1_EB]	= &sensor1_eb.common.hw,
+		[CLK_SENSOR2_EB]	= &sensor2_eb.common.hw,
+		[CLK_MCPHY_CFG_EB]	= &mcphy_cfg_eb.common.hw,
+	},
+	.num	= CLK_MM_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_mm_gate_desc = {
+	.clk_clks	= sc9863a_mm_gate_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_mm_gate_clks),
+	.hw_clks	= &sc9863a_mm_gate_hws,
+};
+
+/* mm clocks */
+static SPRD_GATE_CLK(mipi_csi_clk, "mipi-csi-clk", "mm-ahb", 0x20,
+		     BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_GATE_CLK(mipi_csi_s_clk, "mipi-csi-s-clk", "mm-ahb", 0x24,
+		     BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_GATE_CLK(mipi_csi_m_clk, "mipi-csi-m-clk", "mm-ahb", 0x28,
+		     BIT(16), CLK_IGNORE_UNUSED, 0);
+
+static struct sprd_clk_common *sc9863a_mm_clk_clks[] = {
+	/* address base is 0x60900000 */
+	&mipi_csi_clk.common,
+	&mipi_csi_s_clk.common,
+	&mipi_csi_m_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_mm_clk_hws = {
+	.hws	= {
+		[CLK_MIPI_CSI]		= &mipi_csi_clk.common.hw,
+		[CLK_MIPI_CSI_S]	= &mipi_csi_s_clk.common.hw,
+		[CLK_MIPI_CSI_M]	= &mipi_csi_m_clk.common.hw,
+	},
+	.num	= CLK_MM_CLK_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_mm_clk_desc = {
+	.clk_clks	= sc9863a_mm_clk_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_mm_clk_clks),
+	.hw_clks	= &sc9863a_mm_clk_hws,
+};
+
+/* vsp gate clocks */
+static SPRD_SC_GATE_CLK(vckg_eb, "vckg-eb", "mm-ahb", 0x0, 0x1000,
+			BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(vvsp_eb, "vvsp-eb", "mm-ahb", 0x0, 0x1000,
+			BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(vjpg_eb, "vjpg-eb", "mm-ahb", 0x0, 0x1000,
+			BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(vcpp_eb, "vcpp-eb", "mm-ahb", 0x0, 0x1000,
+			BIT(3), CLK_IGNORE_UNUSED, 0);
+
+static struct sprd_clk_common *sc9863a_vspahb_gate_clks[] = {
+	/* address base is 0x62000000 */
+	&vckg_eb.common,
+	&vvsp_eb.common,
+	&vjpg_eb.common,
+	&vcpp_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_vspahb_gate_hws = {
+	.hws	= {
+		[CLK_VCKG_EB]		= &vckg_eb.common.hw,
+		[CLK_VVSP_EB]		= &vvsp_eb.common.hw,
+		[CLK_VJPG_EB]		= &vjpg_eb.common.hw,
+		[CLK_VCPP_EB]		= &vcpp_eb.common.hw,
+	},
+	.num	= CLK_VSP_AHB_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_vspahb_gate_desc = {
+	.clk_clks	= sc9863a_vspahb_gate_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_vspahb_gate_clks),
+	.hw_clks	= &sc9863a_vspahb_gate_hws,
+};
+
+static SPRD_SC_GATE_CLK(sim0_eb,	"sim0-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(iis0_eb,	"iis0-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(iis1_eb,	"iis1-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(iis2_eb,	"iis2-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(spi0_eb,	"spi0-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(spi1_eb,	"spi1-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(6), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(spi2_eb,	"spi2-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c0_eb,	"i2c0-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c1_eb,	"i2c1-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c2_eb,	"i2c2-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c3_eb,	"i2c3-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c4_eb,	"i2c4-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(12), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart0_eb,	"uart0-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart1_eb,	"uart1-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart2_eb,	"uart2-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(15), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart3_eb,	"uart3-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart4_eb,	"uart4-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(17), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sim0_32k_eb,	"sim0_32k-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(spi3_eb,	"spi3-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(19), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c5_eb,	"i2c5-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(20), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c6_eb,	"i2c6-eb",	"ext-26m", 0x0,
+		     0x1000, BIT(21), CLK_IGNORE_UNUSED, 0);
+
+static struct sprd_clk_common *sc9863a_apapb_gate[] = {
+	/* address base is 0x71300000 */
+	&sim0_eb.common,
+	&iis0_eb.common,
+	&iis1_eb.common,
+	&iis2_eb.common,
+	&spi0_eb.common,
+	&spi1_eb.common,
+	&spi2_eb.common,
+	&i2c0_eb.common,
+	&i2c1_eb.common,
+	&i2c2_eb.common,
+	&i2c3_eb.common,
+	&i2c4_eb.common,
+	&uart0_eb.common,
+	&uart1_eb.common,
+	&uart2_eb.common,
+	&uart3_eb.common,
+	&uart4_eb.common,
+	&sim0_32k_eb.common,
+	&spi3_eb.common,
+	&i2c5_eb.common,
+	&i2c6_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_apapb_gate_hws = {
+	.hws	= {
+		[CLK_SIM0_EB]		= &sim0_eb.common.hw,
+		[CLK_IIS0_EB]		= &iis0_eb.common.hw,
+		[CLK_IIS1_EB]		= &iis1_eb.common.hw,
+		[CLK_IIS2_EB]		= &iis2_eb.common.hw,
+		[CLK_SPI0_EB]		= &spi0_eb.common.hw,
+		[CLK_SPI1_EB]		= &spi1_eb.common.hw,
+		[CLK_SPI2_EB]		= &spi2_eb.common.hw,
+		[CLK_I2C0_EB]		= &i2c0_eb.common.hw,
+		[CLK_I2C1_EB]		= &i2c1_eb.common.hw,
+		[CLK_I2C2_EB]		= &i2c2_eb.common.hw,
+		[CLK_I2C3_EB]		= &i2c3_eb.common.hw,
+		[CLK_I2C4_EB]		= &i2c4_eb.common.hw,
+		[CLK_UART0_EB]		= &uart0_eb.common.hw,
+		[CLK_UART1_EB]		= &uart1_eb.common.hw,
+		[CLK_UART2_EB]		= &uart2_eb.common.hw,
+		[CLK_UART3_EB]		= &uart3_eb.common.hw,
+		[CLK_UART4_EB]		= &uart4_eb.common.hw,
+		[CLK_SIM0_32K_EB]	= &sim0_32k_eb.common.hw,
+		[CLK_SPI3_EB]		= &spi3_eb.common.hw,
+		[CLK_I2C5_EB]		= &i2c5_eb.common.hw,
+		[CLK_I2C6_EB]		= &i2c6_eb.common.hw,
+	},
+	.num	= CLK_AP_APB_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_apapb_gate_desc = {
+	.clk_clks	= sc9863a_apapb_gate,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_apapb_gate),
+	.hw_clks	= &sc9863a_apapb_gate_hws,
+};
+
+static const struct of_device_id sprd_sc9863a_clk_ids[] = {
+	{ .compatible = "sprd,sc9863a-ap-clk",	/* 0x21500000 */
+	  .data = &sc9863a_ap_clk_desc },
+	{ .compatible = "sprd,sc9863a-pmu-gate",	/* 0x402b0000 */
+	  .data = &sc9863a_pmu_gate_desc },
+	{ .compatible = "sprd,sc9863a-pll",	/* 0x40353000 */
+	  .data = &sc9863a_pll_desc },
+	{ .compatible = "sprd,sc9863a-mpll",	/* 0x40359000 */
+	  .data = &sc9863a_mpll_desc },
+	{ .compatible = "sprd,sc9863a-rpll",	/* 0x4035c000 */
+	  .data = &sc9863a_rpll_desc },
+	{ .compatible = "sprd,sc9863a-dpll",	/* 0x40363000 */
+	  .data = &sc9863a_dpll_desc },
+	{ .compatible = "sprd,sc9863a-aon-clk",	/* 0x402d0000 */
+	  .data = &sc9863a_aon_clk_desc },
+	{ .compatible = "sprd,sc9863a-apahb-gate",	/* 0x20e00000 */
+	  .data = &sc9863a_apahb_gate_desc },
+	{ .compatible = "sprd,sc9863a-aonapb-gate",	/* 0x402e0000 */
+	  .data = &sc9863a_aonapb_gate_desc },
+	{ .compatible = "sprd,sc9863a-mm-gate",	/* 0x60800000 */
+	  .data = &sc9863a_mm_gate_desc },
+	{ .compatible = "sprd,sc9863a-mm-clk",	/* 0x60900000 */
+	  .data = &sc9863a_mm_clk_desc },
+	{ .compatible = "sprd,sc9863a-vspahb-gate",	/* 0x62000000 */
+	  .data = &sc9863a_vspahb_gate_desc },
+	{ .compatible = "sprd,sc9863a-apapb-gate",	/* 0x71300000 */
+	  .data = &sc9863a_apapb_gate_desc },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sprd_sc9863a_clk_ids);
+
+static int sc9863a_clk_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	const struct sprd_clk_desc *desc;
+
+	match = of_match_node(sprd_sc9863a_clk_ids, pdev->dev.of_node);
+	if (!match) {
+		pr_err("%s: of_match_node() failed", __func__);
+		return -ENODEV;
+	}
+
+	desc = match->data;
+	sprd_clk_regmap_init(pdev, desc);
+
+	return sprd_clk_probe(&pdev->dev, desc->hw_clks);
+}
+
+static struct platform_driver sc9863a_clk_driver = {
+	.probe	= sc9863a_clk_probe,
+	.driver	= {
+		.name	= "sc9863a-clk",
+		.of_match_table	= sprd_sc9863a_clk_ids,
+	},
+};
+module_platform_driver(sc9863a_clk_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC9863A Clock Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sc9863a-clk");
-- 
2.20.1

Re: [PATCH 5/5] clk: sprd: add clocks support for SC9863A

[Stephen Boyd]

Quoting Chunyan Zhang (2019-10-25 04:13:38)
> 
> Add the list of clocks for the Unisoc SC9863A, alone with clock

s/alone/along/?

> initialization.
> 
> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
> diff --git a/drivers/clk/sprd/sc9863a-clk.c b/drivers/clk/sprd/sc9863a-clk.c
> new file mode 100644
> index 000000000000..5369db1090f0
> --- /dev/null
> +++ b/drivers/clk/sprd/sc9863a-clk.c
> @@ -0,0 +1,1711 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Unisoc SC9863A clock driver
> + *
> + * Copyright (C) 2019 Unisoc, Inc.
> + * Author: Chunyan Zhang <chunyan.zhang@unisoc.com>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#include <dt-bindings/clock/sprd,sc9863a-clk.h>
> +
> +#include "common.h"
> +#include "composite.h"
> +#include "div.h"
> +#include "gate.h"
> +#include "mux.h"
> +#include "pll.h"
> +
> +SPRD_PLL_SC_GATE_CLK(mpll0_gate, "mpll0-gate", "ext-26m", 0x94,
> +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> +SPRD_PLL_SC_GATE_CLK(dpll0_gate, "dpll0-gate", "ext-26m", 0x98,
> +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> +SPRD_PLL_SC_GATE_CLK(lpll_gate, "lpll-gate", "ext-26m", 0x9c,
> +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> +SPRD_PLL_SC_GATE_CLK(gpll_gate, "gpll-gate", "ext-26m", 0xa8,
> +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> +SPRD_PLL_SC_GATE_CLK(dpll1_gate, "dpll1-gate", "ext-26m", 0x1dc,
> +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> +SPRD_PLL_SC_GATE_CLK(mpll1_gate, "mpll1-gate", "ext-26m", 0x1e0,
> +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> +SPRD_PLL_SC_GATE_CLK(mpll2_gate, "mpll2-gate", "ext-26m", 0x1e4,
> +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> +SPRD_PLL_SC_GATE_CLK(isppll_gate, "isppll-gate", "ext-26m", 0x1e8,
> +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> +
> +static struct sprd_clk_common *sc9863a_pmu_gate_clks[] = {
> +       /* address base is 0x402b0000 */
> +       &mpll0_gate.common,
> +       &dpll0_gate.common,
> +       &lpll_gate.common,
> +       &gpll_gate.common,
> +       &dpll1_gate.common,
> +       &mpll1_gate.common,
> +       &mpll2_gate.common,
> +       &isppll_gate.common,
> +};
> +
> +static struct clk_hw_onecell_data sc9863a_pmu_gate_hws = {
> +       .hws    = {
> +               [CLK_MPLL0_GATE]        = &mpll0_gate.common.hw,
> +               [CLK_DPLL0_GATE]        = &dpll0_gate.common.hw,
> +               [CLK_LPLL_GATE]         = &lpll_gate.common.hw,
> +               [CLK_GPLL_GATE]         = &gpll_gate.common.hw,
> +               [CLK_DPLL1_GATE]        = &dpll1_gate.common.hw,
> +               [CLK_MPLL1_GATE]        = &mpll1_gate.common.hw,
> +               [CLK_MPLL2_GATE]        = &mpll2_gate.common.hw,
> +               [CLK_ISPPLL_GATE]       = &isppll_gate.common.hw,
> +       },
> +       .num    = CLK_PMU_APB_NUM,
> +};
> +
> +static const struct sprd_clk_desc sc9863a_pmu_gate_desc = {
> +       .clk_clks       = sc9863a_pmu_gate_clks,
> +       .num_clk_clks   = ARRAY_SIZE(sc9863a_pmu_gate_clks),
> +       .hw_clks        = &sc9863a_pmu_gate_hws,
> +};
> +
> +static const u64 itable[5] = {4, 1000000000, 1200000000,
> +                             1400000000, 1600000000};
> +
> +static const struct clk_bit_field f_twpll[PLL_FACT_MAX] = {
> +       { .shift = 95,  .width = 1 },   /* lock_done    */
> +       { .shift = 0,   .width = 1 },   /* div_s        */
> +       { .shift = 1,   .width = 1 },   /* mod_en       */
> +       { .shift = 2,   .width = 1 },   /* sdm_en       */
> +       { .shift = 0,   .width = 0 },   /* refin        */
> +       { .shift = 3,   .width = 3 },   /* ibias        */
> +       { .shift = 8,   .width = 11 },  /* n            */
> +       { .shift = 55,  .width = 7 },   /* nint         */
> +       { .shift = 32,  .width = 23},   /* kint         */
> +       { .shift = 0,   .width = 0 },   /* prediv       */
> +       { .shift = 0,   .width = 0 },   /* postdiv      */
> +};
> +static SPRD_PLL_WITH_ITABLE_1K(twpll_clk, "twpll", "ext-26m", 0x4,
> +                                  3, itable, f_twpll, 240);
> +static CLK_FIXED_FACTOR(twpll_768m, "twpll-768m", "twpll", 2, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_384m, "twpll-384m", "twpll", 4, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_192m, "twpll-192m", "twpll", 8, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_96m, "twpll-96m", "twpll", 16, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_48m, "twpll-48m", "twpll", 32, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_24m, "twpll-24m", "twpll", 64, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_12m, "twpll-12m", "twpll", 128, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_512m, "twpll-512m", "twpll", 3, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_256m, "twpll-256m", "twpll", 6, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_128m, "twpll-128m", "twpll", 12, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_64m, "twpll-64m", "twpll", 24, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_307m2, "twpll-307m2", "twpll", 5, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_219m4, "twpll-219m4", "twpll", 7, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_170m6, "twpll-170m6", "twpll", 9, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_153m6, "twpll-153m6", "twpll", 10, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_76m8, "twpll-76m8", "twpll", 20, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_51m2, "twpll-51m2", "twpll", 30, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_38m4, "twpll-38m4", "twpll", 40, 1, 0);
> +static CLK_FIXED_FACTOR(twpll_19m2, "twpll-19m2", "twpll", 80, 1, 0);
> +
> +static const struct clk_bit_field f_lpll[PLL_FACT_MAX] = {
> +       { .shift = 95,  .width = 1 },   /* lock_done    */
> +       { .shift = 0,   .width = 1 },   /* div_s        */
> +       { .shift = 1,   .width = 1 },   /* mod_en       */
> +       { .shift = 2,   .width = 1 },   /* sdm_en       */
> +       { .shift = 0,   .width = 0 },   /* refin        */
> +       { .shift = 6,   .width = 2 },   /* ibias        */
> +       { .shift = 8,   .width = 11 },  /* n            */
> +       { .shift = 55,  .width = 7 },   /* nint         */
> +       { .shift = 32,  .width = 23},   /* kint         */
> +       { .shift = 0,   .width = 0 },   /* prediv       */
> +       { .shift = 0,   .width = 0 },   /* postdiv      */
> +};
> +static SPRD_PLL_WITH_ITABLE_1K(lpll_clk, "lpll", "lpll-gate", 0x20,
> +                                  3, itable, f_lpll, 240);
> +static CLK_FIXED_FACTOR(lpll_409m6, "lpll-409m6", "lpll", 3, 1, 0);
> +static CLK_FIXED_FACTOR(lpll_245m76, "lpll-245m76", "lpll", 5, 1, 0);
> +
> +static const struct clk_bit_field f_gpll[PLL_FACT_MAX] = {
> +       { .shift = 95,  .width = 1 },   /* lock_done    */
> +       { .shift = 0,   .width = 1 },   /* div_s        */
> +       { .shift = 1,   .width = 1 },   /* mod_en       */
> +       { .shift = 2,   .width = 1 },   /* sdm_en       */
> +       { .shift = 0,   .width = 0 },   /* refin        */
> +       { .shift = 6,   .width = 2 },   /* ibias        */
> +       { .shift = 8,   .width = 11 },  /* n            */
> +       { .shift = 55,  .width = 7 },   /* nint         */
> +       { .shift = 32,  .width = 23},   /* kint         */
> +       { .shift = 0,   .width = 0 },   /* prediv       */
> +       { .shift = 80,  .width = 1 },   /* postdiv      */
> +};
> +static SPRD_PLL_WITH_ITABLE_K_FVCO(gpll_clk, "gpll", "gpll-gate", 0x38,
> +                                  3, itable, f_gpll, 240,
> +                                  1000, 1000, 1, 400000000);
> +
> +#define f_isppll f_gpll

Why redefine? Please use the actual variable name where it is used.

> +static SPRD_PLL_WITH_ITABLE_1K(isppll_clk, "isppll", "isppll-gate", 0x50,
> +                                  3, itable, f_isppll, 240);
> +static CLK_FIXED_FACTOR(isppll_468m, "isppll-468m", "isppll", 2, 1, 0);
> +
> +static struct sprd_clk_common *sc9863a_pll_clks[] = {
> +       /* address base is 0x40353000 */
> +       &twpll_clk.common,
> +       &lpll_clk.common,
> +       &gpll_clk.common,
> +       &isppll_clk.common,
> +};
> +
> +static struct clk_hw_onecell_data sc9863a_pll_hws = {
> +       .hws    = {
> +               [CLK_TWPLL]             = &twpll_clk.common.hw,
> +               [CLK_TWPLL_768M]        = &twpll_768m.hw,
> +               [CLK_TWPLL_384M]        = &twpll_384m.hw,
> +               [CLK_TWPLL_192M]        = &twpll_192m.hw,
> +               [CLK_TWPLL_96M]         = &twpll_96m.hw,
> +               [CLK_TWPLL_48M]         = &twpll_48m.hw,
> +               [CLK_TWPLL_24M]         = &twpll_24m.hw,
> +               [CLK_TWPLL_12M]         = &twpll_12m.hw,
> +               [CLK_TWPLL_512M]        = &twpll_512m.hw,
> +               [CLK_TWPLL_256M]        = &twpll_256m.hw,
> +               [CLK_TWPLL_128M]        = &twpll_128m.hw,
> +               [CLK_TWPLL_64M]         = &twpll_64m.hw,
> +               [CLK_TWPLL_307M2]       = &twpll_307m2.hw,
> +               [CLK_TWPLL_219M4]       = &twpll_219m4.hw,
> +               [CLK_TWPLL_170M6]       = &twpll_170m6.hw,
> +               [CLK_TWPLL_153M6]       = &twpll_153m6.hw,
> +               [CLK_TWPLL_76M8]        = &twpll_76m8.hw,
> +               [CLK_TWPLL_51M2]        = &twpll_51m2.hw,
> +               [CLK_TWPLL_38M4]        = &twpll_38m4.hw,
> +               [CLK_TWPLL_19M2]        = &twpll_19m2.hw,
> +               [CLK_LPLL]              = &lpll_clk.common.hw,
> +               [CLK_LPLL_409M6]        = &lpll_409m6.hw,
> +               [CLK_LPLL_245M76]       = &lpll_245m76.hw,
> +               [CLK_GPLL]              = &gpll_clk.common.hw,
> +               [CLK_ISPPLL]            = &isppll_clk.common.hw,
> +               [CLK_ISPPLL_468M]       = &isppll_468m.hw,
> +
> +       },
> +       .num    = CLK_ANLG_PHY_G1_NUM,
> +};
> +
> +static const struct sprd_clk_desc sc9863a_pll_desc = {
> +       .clk_clks       = sc9863a_pll_clks,
> +       .num_clk_clks   = ARRAY_SIZE(sc9863a_pll_clks),
> +       .hw_clks        = &sc9863a_pll_hws,
> +};
> +
> +#define f_mpll f_gpll

Same comment.

> +static const u64 itable_mpll[6] = {5, 1000000000, 1200000000, 1400000000,
> +                                  1600000000, 1800000000};
> +static SPRD_PLL_WITH_ITABLE_K_FVCO(mpll0_clk, "mpll0", "mpll0-gate", 0x0,
> +                                  3, itable_mpll, f_mpll, 240,
> +                                  1000, 1000, 1, 1000000000);
> +static SPRD_PLL_WITH_ITABLE_K_FVCO(mpll1_clk, "mpll1", "mpll1-gate", 0x18,
> +                                  3, itable_mpll, f_mpll, 240,
> +                                  1000, 1000, 1, 1000000000);
> +static SPRD_PLL_WITH_ITABLE_K_FVCO(mpll2_clk, "mpll2", "mpll2-gate", 0x30,
> +                                  3, itable_mpll, f_mpll, 240,
> +                                  1000, 1000, 1, 1000000000);
> +static CLK_FIXED_FACTOR(mpll2_675m, "mpll2-675m", "mpll2", 2, 1, 0);
> +
> +static struct sprd_clk_common *sc9863a_mpll_clks[] = {
> +       /* address base is 0x40359000 */
> +       &mpll0_clk.common,
> +       &mpll1_clk.common,
> +       &mpll2_clk.common,
> +};
> +
> +static struct clk_hw_onecell_data sc9863a_mpll_hws = {
> +       .hws    = {
> +               [CLK_MPLL0]             = &mpll0_clk.common.hw,
> +               [CLK_MPLL1]             = &mpll1_clk.common.hw,
> +               [CLK_MPLL2]             = &mpll2_clk.common.hw,
> +               [CLK_MPLL2_675M]        = &mpll2_675m.hw,
> +
> +       },
> +       .num    = CLK_ANLG_PHY_G4_NUM,
> +};
> +
> +static const struct sprd_clk_desc sc9863a_mpll_desc = {
> +       .clk_clks       = sc9863a_mpll_clks,
> +       .num_clk_clks   = ARRAY_SIZE(sc9863a_mpll_clks),
> +       .hw_clks        = &sc9863a_mpll_hws,
> +};
> +
> +static SPRD_SC_GATE_CLK(audio_gate,    "audio-gate",   "ext-26m", 0x4,
> +                    0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
> +
> +#define f_rpll f_lpll

Same comment.

> +static SPRD_PLL_WITH_ITABLE_1K(rpll_clk, "rpll", "ext-26m", 0x10,
> +                                  3, itable, f_rpll, 240);
> +
> +static CLK_FIXED_FACTOR(rpll_390m, "rpll-390m", "rpll", 2, 1, 0);
> +static CLK_FIXED_FACTOR(rpll_260m, "rpll-260m", "rpll", 3, 1, 0);
> +static CLK_FIXED_FACTOR(rpll_195m, "rpll-195m", "rpll", 4, 1, 0);
> +static CLK_FIXED_FACTOR(rpll_26m, "rpll-26m", "rpll", 30, 1, 0);
> +
> +static struct sprd_clk_common *sc9863a_rpll_clks[] = {
> +       /* address base is 0x4035c000 */
> +       &audio_gate.common,
> +       &rpll_clk.common,
> +};
> +
> +static struct clk_hw_onecell_data sc9863a_rpll_hws = {
> +       .hws    = {
> +               [CLK_AUDIO_GATE]        = &audio_gate.common.hw,
> +               [CLK_RPLL]              = &rpll_clk.common.hw,
> +               [CLK_RPLL_390M]         = &rpll_390m.hw,
> +               [CLK_RPLL_260M]         = &rpll_260m.hw,
> +               [CLK_RPLL_195M]         = &rpll_195m.hw,
> +               [CLK_RPLL_26M]          = &rpll_26m.hw,
> +       },
> +       .num    = CLK_ANLG_PHY_G5_NUM,
> +};
> +
> +static const struct sprd_clk_desc sc9863a_rpll_desc = {
> +       .clk_clks       = sc9863a_rpll_clks,
> +       .num_clk_clks   = ARRAY_SIZE(sc9863a_rpll_clks),
> +       .hw_clks        = &sc9863a_rpll_hws,
> +};
> +
> +#define f_dpll f_lpll

Same comment.

> +static const u64 itable_dpll[5] = {4, 1211000000, 1320000000, 1570000000,
> +                                  1866000000};
> +static SPRD_PLL_WITH_ITABLE_1K(dpll0_clk, "dpll0", "dpll0-gate", 0x0,
> +                                  3, itable_dpll, f_dpll, 240);
> +static SPRD_PLL_WITH_ITABLE_1K(dpll1_clk, "dpll1", "dpll1-gate", 0x18,
> +                                  3, itable_dpll, f_dpll, 240);
> +
> +static CLK_FIXED_FACTOR(dpll0_933m, "dpll0-933m", "dpll0", 2, 1, 0);
> +static CLK_FIXED_FACTOR(dpll0_622m3, "dpll0-622m3", "dpll0", 3, 1, 0);
> +static CLK_FIXED_FACTOR(dpll1_400m, "dpll1-400m", "dpll1", 4, 1, 0);
> +static CLK_FIXED_FACTOR(dpll1_266m7, "dpll1-266m7", "dpll1", 6, 1, 0);
> +static CLK_FIXED_FACTOR(dpll1_123m1, "dpll1-123m1", "dpll1", 13, 1, 0);
> +static CLK_FIXED_FACTOR(dpll1_50m, "dpll1-50m", "dpll1", 32, 1, 0);
> +
> +static struct sprd_clk_common *sc9863a_dpll_clks[] = {
[...]
> +static SPRD_COMP_CLK(core0_clk, "core0-clk", core_parents, 0xa20,
> +                    0, 3, 8, 3, 0);
> +static SPRD_COMP_CLK(core1_clk, "core1-clk", core_parents, 0xa24,
> +                    0, 3, 8, 3, 0);
> +static SPRD_COMP_CLK(core2_clk, "core2-clk", core_parents, 0xa28,
> +                    0, 3, 8, 3, 0);
> +static SPRD_COMP_CLK(core3_clk, "core3-clk", core_parents, 0xa2c,
> +                    0, 3, 8, 3, 0);
> +static SPRD_COMP_CLK(core4_clk, "core4-clk", core_parents, 0xa30,
> +                    0, 3, 8, 3, 0);
> +static SPRD_COMP_CLK(core5_clk, "core5-clk", core_parents, 0xa34,
> +                    0, 3, 8, 3, 0);
> +static SPRD_COMP_CLK(core6_clk, "core6-clk", core_parents, 0xa38,
> +                    0, 3, 8, 3, 0);
> +static SPRD_COMP_CLK(core7_clk, "core7-clk", core_parents, 0xa3c,
> +                    0, 3, 8, 3, 0);
> +static SPRD_COMP_CLK(scu_clk, "scu-clk", core_parents, 0xa40,
> +                    0, 3, 8, 3, 0);
> +static SPRD_DIV_CLK(ace_clk, "ace-clk", "scu-clk", 0xa44,
> +                   8, 3, 0);
> +static SPRD_DIV_CLK(axi_periph_clk, "axi-periph-clk", "scu-clk", 0xa48,
> +                   8, 3, 0);
> +static SPRD_DIV_CLK(axi_acp_clk, "axi-acp-clk", "scu-clk", 0xa4c,
> +                   8, 3, 0);
> +
> +static const char * const atb_parents[] = { "ext-26m", "twpll-384m",
> +                                           "twpll-512m", "mpll2" };
> +static SPRD_COMP_CLK(atb_clk, "atb-clk", atb_parents, 0xa50,
> +                    0, 2, 8, 3, 0);
> +static SPRD_DIV_CLK(debug_apb_clk, "debug-apb-clk", "atb-clk", 0xa54,
> +                   8, 3, 0);
> +
> +static const char * const gic_parents[] = { "ext-26m", "twpll-153m6",
> +                                           "twpll-384m", "twpll-512m" };

Can you use the new way of specifying clk parents instead of using these
big string lists? That will hopefully cut down on the size of this code
by reducing all these string lists.

> +static SPRD_COMP_CLK(gic_clk, "gic-clk", gic_parents, 0xa58,
> +                    0, 2, 8, 3, 0);
> +static SPRD_COMP_CLK(periph_clk, "periph-clk", gic_parents, 0xa5c,
> +                    0, 2, 8, 3, 0);
> +
> +static struct sprd_clk_common *sc9863a_aon_clks[] = {
> +       /* address base is 0x402d0000 */
> +       &emc_clk.common,
> +       &aon_apb.common,
> +       &adi_clk.common,
> +       &aux0_clk.common,
> +       &aux1_clk.common,
> +       &aux2_clk.common,
> +       &probe_clk.common,
> +       &pwm0_clk.common,
> +       &pwm1_clk.common,
> +       &pwm2_clk.common,
> +       &aon_thm_clk.common,
> +       &audif_clk.common,
> +       &cpu_dap_clk.common,
> +       &cpu_ts_clk.common,
> +       &djtag_tck_clk.common,
> +       &emc_ref_clk.common,
> +       &cssys_clk.common,
> +       &aon_pmu_clk.common,
> +       &pmu_26m_clk.common,
> +       &aon_tmr_clk.common,
> +       &power_cpu_clk.common,
> +       &ap_axi.common,
> +       &sdio0_2x.common,
> +       &sdio1_2x.common,
> +       &sdio2_2x.common,
> +       &emmc_2x.common,
> +       &dpu_clk.common,
> +       &dpu_dpi.common,
> +       &otg_ref_clk.common,
> +       &sdphy_apb_clk.common,
> +       &alg_io_apb_clk.common,
> +       &gpu_core.common,
> +       &gpu_soc.common,
> +       &mm_emc.common,
> +       &mm_ahb.common,
> +       &bpc_clk.common,
> +       &dcam_if_clk.common,
> +       &isp_clk.common,
> +       &jpg_clk.common,
> +       &cpp_clk.common,
> +       &sensor0_clk.common,
> +       &sensor1_clk.common,
> +       &sensor2_clk.common,
> +       &mm_vemc.common,
> +       &mm_vahb.common,
> +       &clk_vsp.common,
> +       &core0_clk.common,
> +       &core1_clk.common,
> +       &core2_clk.common,
> +       &core3_clk.common,
> +       &core4_clk.common,
> +       &core5_clk.common,
> +       &core6_clk.common,
> +       &core7_clk.common,
> +       &scu_clk.common,
> +       &ace_clk.common,
> +       &axi_periph_clk.common,
> +       &axi_acp_clk.common,
> +       &atb_clk.common,
> +       &debug_apb_clk.common,
> +       &gic_clk.common,
> +       &periph_clk.common,
> +};
> +
> +static struct clk_hw_onecell_data sc9863a_aon_clk_hws = {
> +       .hws    = {
> +               [CLK_13M]               = &clk_13m.hw,
> +               [CLK_6M5]               = &clk_6m5.hw,
> +               [CLK_4M3]               = &clk_4m3.hw,
> +               [CLK_2M]                = &clk_2m.hw,
> +               [CLK_250K]              = &clk_250k.hw,
> +               [CLK_RCO_25M]           = &rco_25m.hw,
> +               [CLK_RCO_4M]            = &rco_4m.hw,
> +               [CLK_RCO_2M]            = &rco_2m.hw,
> +               [CLK_EMC]               = &emc_clk.common.hw,
> +               [CLK_AON_APB]           = &aon_apb.common.hw,
> +               [CLK_ADI]               = &adi_clk.common.hw,
> +               [CLK_AUX0]              = &aux0_clk.common.hw,
> +               [CLK_AUX1]              = &aux1_clk.common.hw,
> +               [CLK_AUX2]              = &aux2_clk.common.hw,
> +               [CLK_PROBE]             = &probe_clk.common.hw,
> +               [CLK_PWM0]              = &pwm0_clk.common.hw,
> +               [CLK_PWM1]              = &pwm1_clk.common.hw,
> +               [CLK_PWM2]              = &pwm2_clk.common.hw,
> +               [CLK_AON_THM]           = &aon_thm_clk.common.hw,
> +               [CLK_AUDIF]             = &audif_clk.common.hw,
> +               [CLK_CPU_DAP]           = &cpu_dap_clk.common.hw,
> +               [CLK_CPU_TS]            = &cpu_ts_clk.common.hw,
> +               [CLK_DJTAG_TCK]         = &djtag_tck_clk.common.hw,
> +               [CLK_EMC_REF]           = &emc_ref_clk.common.hw,
> +               [CLK_CSSYS]             = &cssys_clk.common.hw,
> +               [CLK_AON_PMU]           = &aon_pmu_clk.common.hw,
> +               [CLK_PMU_26M]           = &pmu_26m_clk.common.hw,
> +               [CLK_AON_TMR]           = &aon_tmr_clk.common.hw,
> +               [CLK_POWER_CPU]         = &power_cpu_clk.common.hw,
> +               [CLK_AP_AXI]            = &ap_axi.common.hw,
> +               [CLK_SDIO0_2X]          = &sdio0_2x.common.hw,
> +               [CLK_SDIO1_2X]          = &sdio1_2x.common.hw,
> +               [CLK_SDIO2_2X]          = &sdio2_2x.common.hw,
> +               [CLK_EMMC_2X]           = &emmc_2x.common.hw,
> +               [CLK_DPU]               = &dpu_clk.common.hw,
> +               [CLK_DPU_DPI]           = &dpu_dpi.common.hw,
> +               [CLK_OTG_REF]           = &otg_ref_clk.common.hw,
> +               [CLK_SDPHY_APB]         = &sdphy_apb_clk.common.hw,
> +               [CLK_ALG_IO_APB]        = &alg_io_apb_clk.common.hw,
> +               [CLK_GPU_CORE]          = &gpu_core.common.hw,
> +               [CLK_GPU_SOC]           = &gpu_soc.common.hw,
> +               [CLK_MM_EMC]            = &mm_emc.common.hw,
> +               [CLK_MM_AHB]            = &mm_ahb.common.hw,
> +               [CLK_BPC]               = &bpc_clk.common.hw,
> +               [CLK_DCAM_IF]           = &dcam_if_clk.common.hw,
> +               [CLK_ISP]               = &isp_clk.common.hw,
> +               [CLK_JPG]               = &jpg_clk.common.hw,
> +               [CLK_CPP]               = &cpp_clk.common.hw,
> +               [CLK_SENSOR0]           = &sensor0_clk.common.hw,
> +               [CLK_SENSOR1]           = &sensor1_clk.common.hw,
> +               [CLK_SENSOR2]           = &sensor2_clk.common.hw,
> +               [CLK_MM_VEMC]           = &mm_vemc.common.hw,
> +               [CLK_MM_VAHB]           = &mm_vahb.common.hw,
> +               [CLK_VSP]               = &clk_vsp.common.hw,
> +               [CLK_CORE0]             = &core0_clk.common.hw,
> +               [CLK_CORE1]             = &core1_clk.common.hw,
> +               [CLK_CORE2]             = &core2_clk.common.hw,
> +               [CLK_CORE3]             = &core3_clk.common.hw,
> +               [CLK_CORE4]             = &core4_clk.common.hw,
> +               [CLK_CORE5]             = &core5_clk.common.hw,
> +               [CLK_CORE6]             = &core6_clk.common.hw,
> +               [CLK_CORE7]             = &core7_clk.common.hw,
> +               [CLK_SCU]               = &scu_clk.common.hw,
> +               [CLK_ACE]               = &ace_clk.common.hw,
> +               [CLK_AXI_PERIPH]        = &axi_periph_clk.common.hw,
> +               [CLK_AXI_ACP]           = &axi_acp_clk.common.hw,
> +               [CLK_ATB]               = &atb_clk.common.hw,
> +               [CLK_DEBUG_APB]         = &debug_apb_clk.common.hw,
> +               [CLK_GIC]               = &gic_clk.common.hw,
> +               [CLK_PERIPH]            = &periph_clk.common.hw,
> +       },
> +       .num    = CLK_AON_CLK_NUM,
> +};
> +
> +static const struct sprd_clk_desc sc9863a_aon_clk_desc = {
> +       .clk_clks       = sc9863a_aon_clks,
> +       .num_clk_clks   = ARRAY_SIZE(sc9863a_aon_clks),
> +       .hw_clks        = &sc9863a_aon_clk_hws,
> +};
> +
> +static SPRD_SC_GATE_CLK(otg_eb, "otg-eb", "ap-axi", 0x0, 0x1000,
> +                       BIT(4), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(dma_eb, "dma-eb", "ap-axi", 0x0, 0x1000,
> +                       BIT(5), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(ce_eb, "ce-eb", "ap-axi", 0x0, 0x1000,
> +                       BIT(6), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(nandc_eb, "nandc-eb", "ap-axi", 0x0, 0x1000,
> +                       BIT(7), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(sdio0_eb, "sdio0-eb", "ap-axi", 0x0, 0x1000,
> +                       BIT(8), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(sdio1_eb, "sdio1-eb", "ap-axi", 0x0, 0x1000,
> +                       BIT(9), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(sdio2_eb, "sdio2-eb", "ap-axi", 0x0, 0x1000,
> +                       BIT(10), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(emmc_eb, "emmc-eb", "ap-axi", 0x0, 0x1000,
> +                       BIT(11), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(emmc_32k_eb, "emmc-32k-eb", "ap-axi", 0x0, 0x1000,
> +                       BIT(27), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(sdio0_32k_eb, "sdio0-32k-eb", "ap-axi", 0x0, 0x1000,
> +                       BIT(28), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(sdio1_32k_eb, "sdio1-32k-eb", "ap-axi", 0x0, 0x1000,
> +                       BIT(29), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(sdio2_32k_eb, "sdio2-32k-eb", "ap-axi", 0x0, 0x1000,
> +                       BIT(30), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(nandc_26m_eb, "nandc-26m-eb", "ap-axi", 0x0, 0x1000,
> +                       BIT(31), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(dma_eb2, "dma-eb2", "ap-axi", 0x18, 0x1000,
> +                       BIT(0), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(ce_eb2, "ce-eb2", "ap-axi", 0x18, 0x1000,
> +                       BIT(1), CLK_IGNORE_UNUSED, 0);
> +
> +static struct sprd_clk_common *sc9863a_apahb_gate_clks[] = {
> +       /* address base is 0x20e00000 */
> +       &otg_eb.common,
> +       &dma_eb.common,
> +       &ce_eb.common,
> +       &nandc_eb.common,
> +       &sdio0_eb.common,
> +       &sdio1_eb.common,
> +       &sdio2_eb.common,
> +       &emmc_eb.common,
> +       &emmc_32k_eb.common,
> +       &sdio0_32k_eb.common,
> +       &sdio1_32k_eb.common,
> +       &sdio2_32k_eb.common,
> +       &nandc_26m_eb.common,
> +       &dma_eb2.common,
> +       &ce_eb2.common,
> +};
> +
> +static struct clk_hw_onecell_data sc9863a_apahb_gate_hws = {
> +       .hws    = {
> +               [CLK_OTG_EB]            = &otg_eb.common.hw,
> +               [CLK_DMA_EB]            = &dma_eb.common.hw,
> +               [CLK_CE_EB]             = &ce_eb.common.hw,
> +               [CLK_NANDC_EB]          = &nandc_eb.common.hw,
> +               [CLK_SDIO0_EB]          = &sdio0_eb.common.hw,
> +               [CLK_SDIO1_EB]          = &sdio1_eb.common.hw,
> +               [CLK_SDIO2_EB]          = &sdio2_eb.common.hw,
> +               [CLK_EMMC_EB]           = &emmc_eb.common.hw,
> +               [CLK_EMMC_32K_EB]       = &emmc_32k_eb.common.hw,
> +               [CLK_SDIO0_32K_EB]      = &sdio0_32k_eb.common.hw,
> +               [CLK_SDIO1_32K_EB]      = &sdio1_32k_eb.common.hw,
> +               [CLK_SDIO2_32K_EB]      = &sdio2_32k_eb.common.hw,
> +               [CLK_NANDC_26M_EB]      = &nandc_26m_eb.common.hw,
> +               [CLK_DMA_EB2]           = &dma_eb2.common.hw,
> +               [CLK_CE_EB2]            = &ce_eb2.common.hw,
> +       },
> +       .num    = CLK_AP_AHB_GATE_NUM,
> +};
> +
> +static const struct sprd_clk_desc sc9863a_apahb_gate_desc = {
> +       .clk_clks       = sc9863a_apahb_gate_clks,
> +       .num_clk_clks   = ARRAY_SIZE(sc9863a_apahb_gate_clks),
> +       .hw_clks        = &sc9863a_apahb_gate_hws,
> +};
> +
> +/* aon gate clocks */
> +static SPRD_SC_GATE_CLK(adc_eb,        "adc-eb",       "aon-apb", 0x0,
> +                    0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);

There's a lot of CLK_IGNORE_UNUSED. Why? Can you please add a comment in
the code about why we need this flag or remove the flag?

> +static SPRD_SC_GATE_CLK(fm_eb, "fm-eb",        "aon-apb", 0x0,
> +                    0x1000, BIT(1), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(tpc_eb,        "tpc-eb",       "aon-apb", 0x0,
> +                    0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
> +static SPRD_SC_GATE_CLK(gpio_eb, "gpio-eb",    "aon-apb", 0x0,
> +                    0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
[...]
> +
> +static const struct sprd_clk_desc sc9863a_apapb_gate_desc = {
> +       .clk_clks       = sc9863a_apapb_gate,
> +       .num_clk_clks   = ARRAY_SIZE(sc9863a_apapb_gate),
> +       .hw_clks        = &sc9863a_apapb_gate_hws,
> +};
> +
> +static const struct of_device_id sprd_sc9863a_clk_ids[] = {
> +       { .compatible = "sprd,sc9863a-ap-clk",  /* 0x21500000 */

What are the comments? Register addresses?

> +         .data = &sc9863a_ap_clk_desc },
> +       { .compatible = "sprd,sc9863a-pmu-gate",        /* 0x402b0000 */
> +         .data = &sc9863a_pmu_gate_desc },
> +       { .compatible = "sprd,sc9863a-pll",     /* 0x40353000 */
> +         .data = &sc9863a_pll_desc },
> +       { .compatible = "sprd,sc9863a-mpll",    /* 0x40359000 */
> +         .data = &sc9863a_mpll_desc },
> +       { .compatible = "sprd,sc9863a-rpll",    /* 0x4035c000 */
> +         .data = &sc9863a_rpll_desc },
> +       { .compatible = "sprd,sc9863a-dpll",    /* 0x40363000 */
> +         .data = &sc9863a_dpll_desc },
> +       { .compatible = "sprd,sc9863a-aon-clk", /* 0x402d0000 */
> +         .data = &sc9863a_aon_clk_desc },
> +       { .compatible = "sprd,sc9863a-apahb-gate",      /* 0x20e00000 */
> +         .data = &sc9863a_apahb_gate_desc },
> +       { .compatible = "sprd,sc9863a-aonapb-gate",     /* 0x402e0000 */
> +         .data = &sc9863a_aonapb_gate_desc },
> +       { .compatible = "sprd,sc9863a-mm-gate", /* 0x60800000 */
> +         .data = &sc9863a_mm_gate_desc },
> +       { .compatible = "sprd,sc9863a-mm-clk",  /* 0x60900000 */
> +         .data = &sc9863a_mm_clk_desc },
> +       { .compatible = "sprd,sc9863a-vspahb-gate",     /* 0x62000000 */
> +         .data = &sc9863a_vspahb_gate_desc },
> +       { .compatible = "sprd,sc9863a-apapb-gate",      /* 0x71300000 */
> +         .data = &sc9863a_apapb_gate_desc },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(of, sprd_sc9863a_clk_ids);
> +
> +static int sc9863a_clk_probe(struct platform_device *pdev)
> +{
> +       const struct of_device_id *match;
> +       const struct sprd_clk_desc *desc;
> +
> +       match = of_match_node(sprd_sc9863a_clk_ids, pdev->dev.of_node);
> +       if (!match) {
> +               pr_err("%s: of_match_node() failed", __func__);
> +               return -ENODEV;
> +       }

Use device_get_match_data() instead.

> +
> +       desc = match->data;
> +       sprd_clk_regmap_init(pdev, desc);
> +
> +       return sprd_clk_probe(&pdev->dev, desc->hw_clks);
> +}
> +
> +static struct platform_driver sc9863a_clk_driver = {
> +       .probe  = sc9863a_clk_probe,
> +       .driver = {
> +               .name   = "sc9863a-clk",
> +               .of_match_table = sprd_sc9863a_clk_ids,
> +       },
> +};
> +module_platform_driver(sc9863a_clk_driver);
> +
> +MODULE_DESCRIPTION("Spreadtrum SC9863A Clock Driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:sc9863a-clk");

Drop the module alias, it doesn't help from what I can recall.

Re: [PATCH 5/5] clk: sprd: add clocks support for SC9863A

[Chunyan Zhang]

Hi Stephen,

On Thu, 14 Nov 2019 at 06:19, Stephen Boyd <sboyd@kernel.org> wrote:
>
> Quoting Chunyan Zhang (2019-10-25 04:13:38)
> >
> > Add the list of clocks for the Unisoc SC9863A, alone with clock
>
> s/alone/along/?
>
> > initialization.
> >
> > Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
> > diff --git a/drivers/clk/sprd/sc9863a-clk.c b/drivers/clk/sprd/sc9863a-clk.c
> > new file mode 100644
> > index 000000000000..5369db1090f0
> > --- /dev/null
> > +++ b/drivers/clk/sprd/sc9863a-clk.c
> > @@ -0,0 +1,1711 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Unisoc SC9863A clock driver
> > + *
> > + * Copyright (C) 2019 Unisoc, Inc.
> > + * Author: Chunyan Zhang <chunyan.zhang@unisoc.com>
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/err.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +
> > +#include <dt-bindings/clock/sprd,sc9863a-clk.h>
> > +
> > +#include "common.h"
> > +#include "composite.h"
> > +#include "div.h"
> > +#include "gate.h"
> > +#include "mux.h"
> > +#include "pll.h"
> > +
> > +SPRD_PLL_SC_GATE_CLK(mpll0_gate, "mpll0-gate", "ext-26m", 0x94,
> > +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> > +SPRD_PLL_SC_GATE_CLK(dpll0_gate, "dpll0-gate", "ext-26m", 0x98,
> > +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> > +SPRD_PLL_SC_GATE_CLK(lpll_gate, "lpll-gate", "ext-26m", 0x9c,
> > +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> > +SPRD_PLL_SC_GATE_CLK(gpll_gate, "gpll-gate", "ext-26m", 0xa8,
> > +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> > +SPRD_PLL_SC_GATE_CLK(dpll1_gate, "dpll1-gate", "ext-26m", 0x1dc,
> > +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> > +SPRD_PLL_SC_GATE_CLK(mpll1_gate, "mpll1-gate", "ext-26m", 0x1e0,
> > +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> > +SPRD_PLL_SC_GATE_CLK(mpll2_gate, "mpll2-gate", "ext-26m", 0x1e4,
> > +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> > +SPRD_PLL_SC_GATE_CLK(isppll_gate, "isppll-gate", "ext-26m", 0x1e8,
> > +                               0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
> > +
> > +static struct sprd_clk_common *sc9863a_pmu_gate_clks[] = {
> > +       /* address base is 0x402b0000 */
> > +       &mpll0_gate.common,
> > +       &dpll0_gate.common,
> > +       &lpll_gate.common,
> > +       &gpll_gate.common,
> > +       &dpll1_gate.common,
> > +       &mpll1_gate.common,
> > +       &mpll2_gate.common,
> > +       &isppll_gate.common,
> > +};
> > +
> > +static struct clk_hw_onecell_data sc9863a_pmu_gate_hws = {
> > +       .hws    = {
> > +               [CLK_MPLL0_GATE]        = &mpll0_gate.common.hw,
> > +               [CLK_DPLL0_GATE]        = &dpll0_gate.common.hw,
> > +               [CLK_LPLL_GATE]         = &lpll_gate.common.hw,
> > +               [CLK_GPLL_GATE]         = &gpll_gate.common.hw,
> > +               [CLK_DPLL1_GATE]        = &dpll1_gate.common.hw,
> > +               [CLK_MPLL1_GATE]        = &mpll1_gate.common.hw,
> > +               [CLK_MPLL2_GATE]        = &mpll2_gate.common.hw,
> > +               [CLK_ISPPLL_GATE]       = &isppll_gate.common.hw,
> > +       },
> > +       .num    = CLK_PMU_APB_NUM,
> > +};
> > +
> > +static const struct sprd_clk_desc sc9863a_pmu_gate_desc = {
> > +       .clk_clks       = sc9863a_pmu_gate_clks,
> > +       .num_clk_clks   = ARRAY_SIZE(sc9863a_pmu_gate_clks),
> > +       .hw_clks        = &sc9863a_pmu_gate_hws,
> > +};
> > +
> > +static const u64 itable[5] = {4, 1000000000, 1200000000,
> > +                             1400000000, 1600000000};
> > +
> > +static const struct clk_bit_field f_twpll[PLL_FACT_MAX] = {
> > +       { .shift = 95,  .width = 1 },   /* lock_done    */
> > +       { .shift = 0,   .width = 1 },   /* div_s        */
> > +       { .shift = 1,   .width = 1 },   /* mod_en       */
> > +       { .shift = 2,   .width = 1 },   /* sdm_en       */
> > +       { .shift = 0,   .width = 0 },   /* refin        */
> > +       { .shift = 3,   .width = 3 },   /* ibias        */
> > +       { .shift = 8,   .width = 11 },  /* n            */
> > +       { .shift = 55,  .width = 7 },   /* nint         */
> > +       { .shift = 32,  .width = 23},   /* kint         */
> > +       { .shift = 0,   .width = 0 },   /* prediv       */
> > +       { .shift = 0,   .width = 0 },   /* postdiv      */
> > +};
> > +static SPRD_PLL_WITH_ITABLE_1K(twpll_clk, "twpll", "ext-26m", 0x4,
> > +                                  3, itable, f_twpll, 240);
> > +static CLK_FIXED_FACTOR(twpll_768m, "twpll-768m", "twpll", 2, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_384m, "twpll-384m", "twpll", 4, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_192m, "twpll-192m", "twpll", 8, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_96m, "twpll-96m", "twpll", 16, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_48m, "twpll-48m", "twpll", 32, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_24m, "twpll-24m", "twpll", 64, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_12m, "twpll-12m", "twpll", 128, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_512m, "twpll-512m", "twpll", 3, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_256m, "twpll-256m", "twpll", 6, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_128m, "twpll-128m", "twpll", 12, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_64m, "twpll-64m", "twpll", 24, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_307m2, "twpll-307m2", "twpll", 5, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_219m4, "twpll-219m4", "twpll", 7, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_170m6, "twpll-170m6", "twpll", 9, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_153m6, "twpll-153m6", "twpll", 10, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_76m8, "twpll-76m8", "twpll", 20, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_51m2, "twpll-51m2", "twpll", 30, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_38m4, "twpll-38m4", "twpll", 40, 1, 0);
> > +static CLK_FIXED_FACTOR(twpll_19m2, "twpll-19m2", "twpll", 80, 1, 0);
> > +
> > +static const struct clk_bit_field f_lpll[PLL_FACT_MAX] = {
> > +       { .shift = 95,  .width = 1 },   /* lock_done    */
> > +       { .shift = 0,   .width = 1 },   /* div_s        */
> > +       { .shift = 1,   .width = 1 },   /* mod_en       */
> > +       { .shift = 2,   .width = 1 },   /* sdm_en       */
> > +       { .shift = 0,   .width = 0 },   /* refin        */
> > +       { .shift = 6,   .width = 2 },   /* ibias        */
> > +       { .shift = 8,   .width = 11 },  /* n            */
> > +       { .shift = 55,  .width = 7 },   /* nint         */
> > +       { .shift = 32,  .width = 23},   /* kint         */
> > +       { .shift = 0,   .width = 0 },   /* prediv       */
> > +       { .shift = 0,   .width = 0 },   /* postdiv      */
> > +};
> > +static SPRD_PLL_WITH_ITABLE_1K(lpll_clk, "lpll", "lpll-gate", 0x20,
> > +                                  3, itable, f_lpll, 240);
> > +static CLK_FIXED_FACTOR(lpll_409m6, "lpll-409m6", "lpll", 3, 1, 0);
> > +static CLK_FIXED_FACTOR(lpll_245m76, "lpll-245m76", "lpll", 5, 1, 0);
> > +
> > +static const struct clk_bit_field f_gpll[PLL_FACT_MAX] = {
> > +       { .shift = 95,  .width = 1 },   /* lock_done    */
> > +       { .shift = 0,   .width = 1 },   /* div_s        */
> > +       { .shift = 1,   .width = 1 },   /* mod_en       */
> > +       { .shift = 2,   .width = 1 },   /* sdm_en       */
> > +       { .shift = 0,   .width = 0 },   /* refin        */
> > +       { .shift = 6,   .width = 2 },   /* ibias        */
> > +       { .shift = 8,   .width = 11 },  /* n            */
> > +       { .shift = 55,  .width = 7 },   /* nint         */
> > +       { .shift = 32,  .width = 23},   /* kint         */
> > +       { .shift = 0,   .width = 0 },   /* prediv       */
> > +       { .shift = 80,  .width = 1 },   /* postdiv      */
> > +};
> > +static SPRD_PLL_WITH_ITABLE_K_FVCO(gpll_clk, "gpll", "gpll-gate", 0x38,
> > +                                  3, itable, f_gpll, 240,
> > +                                  1000, 1000, 1, 400000000);
> > +
> > +#define f_isppll f_gpll
>
> Why redefine? Please use the actual variable name where it is used.

Ok.

>
> > +static SPRD_PLL_WITH_ITABLE_1K(isppll_clk, "isppll", "isppll-gate", 0x50,
> > +                                  3, itable, f_isppll, 240);
> > +static CLK_FIXED_FACTOR(isppll_468m, "isppll-468m", "isppll", 2, 1, 0);
> > +
> > +static struct sprd_clk_common *sc9863a_pll_clks[] = {
> > +       /* address base is 0x40353000 */
> > +       &twpll_clk.common,
> > +       &lpll_clk.common,
> > +       &gpll_clk.common,
> > +       &isppll_clk.common,
> > +};
> > +
> > +static struct clk_hw_onecell_data sc9863a_pll_hws = {
> > +       .hws    = {
> > +               [CLK_TWPLL]             = &twpll_clk.common.hw,
> > +               [CLK_TWPLL_768M]        = &twpll_768m.hw,
> > +               [CLK_TWPLL_384M]        = &twpll_384m.hw,
> > +               [CLK_TWPLL_192M]        = &twpll_192m.hw,
> > +               [CLK_TWPLL_96M]         = &twpll_96m.hw,
> > +               [CLK_TWPLL_48M]         = &twpll_48m.hw,
> > +               [CLK_TWPLL_24M]         = &twpll_24m.hw,
> > +               [CLK_TWPLL_12M]         = &twpll_12m.hw,
> > +               [CLK_TWPLL_512M]        = &twpll_512m.hw,
> > +               [CLK_TWPLL_256M]        = &twpll_256m.hw,
> > +               [CLK_TWPLL_128M]        = &twpll_128m.hw,
> > +               [CLK_TWPLL_64M]         = &twpll_64m.hw,
> > +               [CLK_TWPLL_307M2]       = &twpll_307m2.hw,
> > +               [CLK_TWPLL_219M4]       = &twpll_219m4.hw,
> > +               [CLK_TWPLL_170M6]       = &twpll_170m6.hw,
> > +               [CLK_TWPLL_153M6]       = &twpll_153m6.hw,
> > +               [CLK_TWPLL_76M8]        = &twpll_76m8.hw,
> > +               [CLK_TWPLL_51M2]        = &twpll_51m2.hw,
> > +               [CLK_TWPLL_38M4]        = &twpll_38m4.hw,
> > +               [CLK_TWPLL_19M2]        = &twpll_19m2.hw,
> > +               [CLK_LPLL]              = &lpll_clk.common.hw,
> > +               [CLK_LPLL_409M6]        = &lpll_409m6.hw,
> > +               [CLK_LPLL_245M76]       = &lpll_245m76.hw,
> > +               [CLK_GPLL]              = &gpll_clk.common.hw,
> > +               [CLK_ISPPLL]            = &isppll_clk.common.hw,
> > +               [CLK_ISPPLL_468M]       = &isppll_468m.hw,
> > +
> > +       },
> > +       .num    = CLK_ANLG_PHY_G1_NUM,
> > +};
> > +
> > +static const struct sprd_clk_desc sc9863a_pll_desc = {
> > +       .clk_clks       = sc9863a_pll_clks,
> > +       .num_clk_clks   = ARRAY_SIZE(sc9863a_pll_clks),
> > +       .hw_clks        = &sc9863a_pll_hws,
> > +};
> > +
> > +#define f_mpll f_gpll
>
> Same comment.
>
> > +static const u64 itable_mpll[6] = {5, 1000000000, 1200000000, 1400000000,
> > +                                  1600000000, 1800000000};
> > +static SPRD_PLL_WITH_ITABLE_K_FVCO(mpll0_clk, "mpll0", "mpll0-gate", 0x0,
> > +                                  3, itable_mpll, f_mpll, 240,
> > +                                  1000, 1000, 1, 1000000000);
> > +static SPRD_PLL_WITH_ITABLE_K_FVCO(mpll1_clk, "mpll1", "mpll1-gate", 0x18,
> > +                                  3, itable_mpll, f_mpll, 240,
> > +                                  1000, 1000, 1, 1000000000);
> > +static SPRD_PLL_WITH_ITABLE_K_FVCO(mpll2_clk, "mpll2", "mpll2-gate", 0x30,
> > +                                  3, itable_mpll, f_mpll, 240,
> > +                                  1000, 1000, 1, 1000000000);
> > +static CLK_FIXED_FACTOR(mpll2_675m, "mpll2-675m", "mpll2", 2, 1, 0);
> > +
> > +static struct sprd_clk_common *sc9863a_mpll_clks[] = {
> > +       /* address base is 0x40359000 */
> > +       &mpll0_clk.common,
> > +       &mpll1_clk.common,
> > +       &mpll2_clk.common,
> > +};
> > +
> > +static struct clk_hw_onecell_data sc9863a_mpll_hws = {
> > +       .hws    = {
> > +               [CLK_MPLL0]             = &mpll0_clk.common.hw,
> > +               [CLK_MPLL1]             = &mpll1_clk.common.hw,
> > +               [CLK_MPLL2]             = &mpll2_clk.common.hw,
> > +               [CLK_MPLL2_675M]        = &mpll2_675m.hw,
> > +
> > +       },
> > +       .num    = CLK_ANLG_PHY_G4_NUM,
> > +};
> > +
> > +static const struct sprd_clk_desc sc9863a_mpll_desc = {
> > +       .clk_clks       = sc9863a_mpll_clks,
> > +       .num_clk_clks   = ARRAY_SIZE(sc9863a_mpll_clks),
> > +       .hw_clks        = &sc9863a_mpll_hws,
> > +};
> > +
> > +static SPRD_SC_GATE_CLK(audio_gate,    "audio-gate",   "ext-26m", 0x4,
> > +                    0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
> > +
> > +#define f_rpll f_lpll
>
> Same comment.
>
> > +static SPRD_PLL_WITH_ITABLE_1K(rpll_clk, "rpll", "ext-26m", 0x10,
> > +                                  3, itable, f_rpll, 240);
> > +
> > +static CLK_FIXED_FACTOR(rpll_390m, "rpll-390m", "rpll", 2, 1, 0);
> > +static CLK_FIXED_FACTOR(rpll_260m, "rpll-260m", "rpll", 3, 1, 0);
> > +static CLK_FIXED_FACTOR(rpll_195m, "rpll-195m", "rpll", 4, 1, 0);
> > +static CLK_FIXED_FACTOR(rpll_26m, "rpll-26m", "rpll", 30, 1, 0);
> > +
> > +static struct sprd_clk_common *sc9863a_rpll_clks[] = {
> > +       /* address base is 0x4035c000 */
> > +       &audio_gate.common,
> > +       &rpll_clk.common,
> > +};
> > +
> > +static struct clk_hw_onecell_data sc9863a_rpll_hws = {
> > +       .hws    = {
> > +               [CLK_AUDIO_GATE]        = &audio_gate.common.hw,
> > +               [CLK_RPLL]              = &rpll_clk.common.hw,
> > +               [CLK_RPLL_390M]         = &rpll_390m.hw,
> > +               [CLK_RPLL_260M]         = &rpll_260m.hw,
> > +               [CLK_RPLL_195M]         = &rpll_195m.hw,
> > +               [CLK_RPLL_26M]          = &rpll_26m.hw,
> > +       },
> > +       .num    = CLK_ANLG_PHY_G5_NUM,
> > +};
> > +
> > +static const struct sprd_clk_desc sc9863a_rpll_desc = {
> > +       .clk_clks       = sc9863a_rpll_clks,
> > +       .num_clk_clks   = ARRAY_SIZE(sc9863a_rpll_clks),
> > +       .hw_clks        = &sc9863a_rpll_hws,
> > +};
> > +
> > +#define f_dpll f_lpll
>
> Same comment.
>
> > +static const u64 itable_dpll[5] = {4, 1211000000, 1320000000, 1570000000,
> > +                                  1866000000};
> > +static SPRD_PLL_WITH_ITABLE_1K(dpll0_clk, "dpll0", "dpll0-gate", 0x0,
> > +                                  3, itable_dpll, f_dpll, 240);
> > +static SPRD_PLL_WITH_ITABLE_1K(dpll1_clk, "dpll1", "dpll1-gate", 0x18,
> > +                                  3, itable_dpll, f_dpll, 240);
> > +
> > +static CLK_FIXED_FACTOR(dpll0_933m, "dpll0-933m", "dpll0", 2, 1, 0);
> > +static CLK_FIXED_FACTOR(dpll0_622m3, "dpll0-622m3", "dpll0", 3, 1, 0);
> > +static CLK_FIXED_FACTOR(dpll1_400m, "dpll1-400m", "dpll1", 4, 1, 0);
> > +static CLK_FIXED_FACTOR(dpll1_266m7, "dpll1-266m7", "dpll1", 6, 1, 0);
> > +static CLK_FIXED_FACTOR(dpll1_123m1, "dpll1-123m1", "dpll1", 13, 1, 0);
> > +static CLK_FIXED_FACTOR(dpll1_50m, "dpll1-50m", "dpll1", 32, 1, 0);
> > +
> > +static struct sprd_clk_common *sc9863a_dpll_clks[] = {
> [...]
> > +static SPRD_COMP_CLK(core0_clk, "core0-clk", core_parents, 0xa20,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(core1_clk, "core1-clk", core_parents, 0xa24,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(core2_clk, "core2-clk", core_parents, 0xa28,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(core3_clk, "core3-clk", core_parents, 0xa2c,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(core4_clk, "core4-clk", core_parents, 0xa30,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(core5_clk, "core5-clk", core_parents, 0xa34,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(core6_clk, "core6-clk", core_parents, 0xa38,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(core7_clk, "core7-clk", core_parents, 0xa3c,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(scu_clk, "scu-clk", core_parents, 0xa40,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_DIV_CLK(ace_clk, "ace-clk", "scu-clk", 0xa44,
> > +                   8, 3, 0);
> > +static SPRD_DIV_CLK(axi_periph_clk, "axi-periph-clk", "scu-clk", 0xa48,
> > +                   8, 3, 0);
> > +static SPRD_DIV_CLK(axi_acp_clk, "axi-acp-clk", "scu-clk", 0xa4c,
> > +                   8, 3, 0);
> > +
> > +static const char * const atb_parents[] = { "ext-26m", "twpll-384m",
> > +                                           "twpll-512m", "mpll2" };
> > +static SPRD_COMP_CLK(atb_clk, "atb-clk", atb_parents, 0xa50,
> > +                    0, 2, 8, 3, 0);
> > +static SPRD_DIV_CLK(debug_apb_clk, "debug-apb-clk", "atb-clk", 0xa54,
> > +                   8, 3, 0);
> > +
> > +static const char * const gic_parents[] = { "ext-26m", "twpll-153m6",
> > +                                           "twpll-384m", "twpll-512m" };
>
> Can you use the new way of specifying clk parents instead of using these
> big string lists? That will hopefully cut down on the size of this code
> by reducing all these string lists.

Ok, need to look at the new way first.


>
> > +static SPRD_COMP_CLK(gic_clk, "gic-clk", gic_parents, 0xa58,
> > +                    0, 2, 8, 3, 0);
> > +static SPRD_COMP_CLK(periph_clk, "periph-clk", gic_parents, 0xa5c,
> > +                    0, 2, 8, 3, 0);
> > +
> > +static struct sprd_clk_common *sc9863a_aon_clks[] = {
> > +       /* address base is 0x402d0000 */
> > +       &emc_clk.common,
> > +       &aon_apb.common,
> > +       &adi_clk.common,
> > +       &aux0_clk.common,
> > +       &aux1_clk.common,
> > +       &aux2_clk.common,
> > +       &probe_clk.common,
> > +       &pwm0_clk.common,
> > +       &pwm1_clk.common,
> > +       &pwm2_clk.common,
> > +       &aon_thm_clk.common,
> > +       &audif_clk.common,
> > +       &cpu_dap_clk.common,
> > +       &cpu_ts_clk.common,
> > +       &djtag_tck_clk.common,
> > +       &emc_ref_clk.common,
> > +       &cssys_clk.common,
> > +       &aon_pmu_clk.common,
> > +       &pmu_26m_clk.common,
> > +       &aon_tmr_clk.common,
> > +       &power_cpu_clk.common,
> > +       &ap_axi.common,
> > +       &sdio0_2x.common,
> > +       &sdio1_2x.common,
> > +       &sdio2_2x.common,
> > +       &emmc_2x.common,
> > +       &dpu_clk.common,
> > +       &dpu_dpi.common,
> > +       &otg_ref_clk.common,
> > +       &sdphy_apb_clk.common,
> > +       &alg_io_apb_clk.common,
> > +       &gpu_core.common,
> > +       &gpu_soc.common,
> > +       &mm_emc.common,
> > +       &mm_ahb.common,
> > +       &bpc_clk.common,
> > +       &dcam_if_clk.common,
> > +       &isp_clk.common,
> > +       &jpg_clk.common,
> > +       &cpp_clk.common,
> > +       &sensor0_clk.common,
> > +       &sensor1_clk.common,
> > +       &sensor2_clk.common,
> > +       &mm_vemc.common,
> > +       &mm_vahb.common,
> > +       &clk_vsp.common,
> > +       &core0_clk.common,
> > +       &core1_clk.common,
> > +       &core2_clk.common,
> > +       &core3_clk.common,
> > +       &core4_clk.common,
> > +       &core5_clk.common,
> > +       &core6_clk.common,
> > +       &core7_clk.common,
> > +       &scu_clk.common,
> > +       &ace_clk.common,
> > +       &axi_periph_clk.common,
> > +       &axi_acp_clk.common,
> > +       &atb_clk.common,
> > +       &debug_apb_clk.common,
> > +       &gic_clk.common,
> > +       &periph_clk.common,
> > +};
> > +
> > +static struct clk_hw_onecell_data sc9863a_aon_clk_hws = {
> > +       .hws    = {
> > +               [CLK_13M]               = &clk_13m.hw,
> > +               [CLK_6M5]               = &clk_6m5.hw,
> > +               [CLK_4M3]               = &clk_4m3.hw,
> > +               [CLK_2M]                = &clk_2m.hw,
> > +               [CLK_250K]              = &clk_250k.hw,
> > +               [CLK_RCO_25M]           = &rco_25m.hw,
> > +               [CLK_RCO_4M]            = &rco_4m.hw,
> > +               [CLK_RCO_2M]            = &rco_2m.hw,
> > +               [CLK_EMC]               = &emc_clk.common.hw,
> > +               [CLK_AON_APB]           = &aon_apb.common.hw,
> > +               [CLK_ADI]               = &adi_clk.common.hw,
> > +               [CLK_AUX0]              = &aux0_clk.common.hw,
> > +               [CLK_AUX1]              = &aux1_clk.common.hw,
> > +               [CLK_AUX2]              = &aux2_clk.common.hw,
> > +               [CLK_PROBE]             = &probe_clk.common.hw,
> > +               [CLK_PWM0]              = &pwm0_clk.common.hw,
> > +               [CLK_PWM1]              = &pwm1_clk.common.hw,
> > +               [CLK_PWM2]              = &pwm2_clk.common.hw,
> > +               [CLK_AON_THM]           = &aon_thm_clk.common.hw,
> > +               [CLK_AUDIF]             = &audif_clk.common.hw,
> > +               [CLK_CPU_DAP]           = &cpu_dap_clk.common.hw,
> > +               [CLK_CPU_TS]            = &cpu_ts_clk.common.hw,
> > +               [CLK_DJTAG_TCK]         = &djtag_tck_clk.common.hw,
> > +               [CLK_EMC_REF]           = &emc_ref_clk.common.hw,
> > +               [CLK_CSSYS]             = &cssys_clk.common.hw,
> > +               [CLK_AON_PMU]           = &aon_pmu_clk.common.hw,
> > +               [CLK_PMU_26M]           = &pmu_26m_clk.common.hw,
> > +               [CLK_AON_TMR]           = &aon_tmr_clk.common.hw,
> > +               [CLK_POWER_CPU]         = &power_cpu_clk.common.hw,
> > +               [CLK_AP_AXI]            = &ap_axi.common.hw,
> > +               [CLK_SDIO0_2X]          = &sdio0_2x.common.hw,
> > +               [CLK_SDIO1_2X]          = &sdio1_2x.common.hw,
> > +               [CLK_SDIO2_2X]          = &sdio2_2x.common.hw,
> > +               [CLK_EMMC_2X]           = &emmc_2x.common.hw,
> > +               [CLK_DPU]               = &dpu_clk.common.hw,
> > +               [CLK_DPU_DPI]           = &dpu_dpi.common.hw,
> > +               [CLK_OTG_REF]           = &otg_ref_clk.common.hw,
> > +               [CLK_SDPHY_APB]         = &sdphy_apb_clk.common.hw,
> > +               [CLK_ALG_IO_APB]        = &alg_io_apb_clk.common.hw,
> > +               [CLK_GPU_CORE]          = &gpu_core.common.hw,
> > +               [CLK_GPU_SOC]           = &gpu_soc.common.hw,
> > +               [CLK_MM_EMC]            = &mm_emc.common.hw,
> > +               [CLK_MM_AHB]            = &mm_ahb.common.hw,
> > +               [CLK_BPC]               = &bpc_clk.common.hw,
> > +               [CLK_DCAM_IF]           = &dcam_if_clk.common.hw,
> > +               [CLK_ISP]               = &isp_clk.common.hw,
> > +               [CLK_JPG]               = &jpg_clk.common.hw,
> > +               [CLK_CPP]               = &cpp_clk.common.hw,
> > +               [CLK_SENSOR0]           = &sensor0_clk.common.hw,
> > +               [CLK_SENSOR1]           = &sensor1_clk.common.hw,
> > +               [CLK_SENSOR2]           = &sensor2_clk.common.hw,
> > +               [CLK_MM_VEMC]           = &mm_vemc.common.hw,
> > +               [CLK_MM_VAHB]           = &mm_vahb.common.hw,
> > +               [CLK_VSP]               = &clk_vsp.common.hw,
> > +               [CLK_CORE0]             = &core0_clk.common.hw,
> > +               [CLK_CORE1]             = &core1_clk.common.hw,
> > +               [CLK_CORE2]             = &core2_clk.common.hw,
> > +               [CLK_CORE3]             = &core3_clk.common.hw,
> > +               [CLK_CORE4]             = &core4_clk.common.hw,
> > +               [CLK_CORE5]             = &core5_clk.common.hw,
> > +               [CLK_CORE6]             = &core6_clk.common.hw,
> > +               [CLK_CORE7]             = &core7_clk.common.hw,
> > +               [CLK_SCU]               = &scu_clk.common.hw,
> > +               [CLK_ACE]               = &ace_clk.common.hw,
> > +               [CLK_AXI_PERIPH]        = &axi_periph_clk.common.hw,
> > +               [CLK_AXI_ACP]           = &axi_acp_clk.common.hw,
> > +               [CLK_ATB]               = &atb_clk.common.hw,
> > +               [CLK_DEBUG_APB]         = &debug_apb_clk.common.hw,
> > +               [CLK_GIC]               = &gic_clk.common.hw,
> > +               [CLK_PERIPH]            = &periph_clk.common.hw,
> > +       },
> > +       .num    = CLK_AON_CLK_NUM,
> > +};
> > +
> > +static const struct sprd_clk_desc sc9863a_aon_clk_desc = {
> > +       .clk_clks       = sc9863a_aon_clks,
> > +       .num_clk_clks   = ARRAY_SIZE(sc9863a_aon_clks),
> > +       .hw_clks        = &sc9863a_aon_clk_hws,
> > +};
> > +
> > +static SPRD_SC_GATE_CLK(otg_eb, "otg-eb", "ap-axi", 0x0, 0x1000,
> > +                       BIT(4), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(dma_eb, "dma-eb", "ap-axi", 0x0, 0x1000,
> > +                       BIT(5), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(ce_eb, "ce-eb", "ap-axi", 0x0, 0x1000,
> > +                       BIT(6), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(nandc_eb, "nandc-eb", "ap-axi", 0x0, 0x1000,
> > +                       BIT(7), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(sdio0_eb, "sdio0-eb", "ap-axi", 0x0, 0x1000,
> > +                       BIT(8), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(sdio1_eb, "sdio1-eb", "ap-axi", 0x0, 0x1000,
> > +                       BIT(9), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(sdio2_eb, "sdio2-eb", "ap-axi", 0x0, 0x1000,
> > +                       BIT(10), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(emmc_eb, "emmc-eb", "ap-axi", 0x0, 0x1000,
> > +                       BIT(11), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(emmc_32k_eb, "emmc-32k-eb", "ap-axi", 0x0, 0x1000,
> > +                       BIT(27), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(sdio0_32k_eb, "sdio0-32k-eb", "ap-axi", 0x0, 0x1000,
> > +                       BIT(28), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(sdio1_32k_eb, "sdio1-32k-eb", "ap-axi", 0x0, 0x1000,
> > +                       BIT(29), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(sdio2_32k_eb, "sdio2-32k-eb", "ap-axi", 0x0, 0x1000,
> > +                       BIT(30), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(nandc_26m_eb, "nandc-26m-eb", "ap-axi", 0x0, 0x1000,
> > +                       BIT(31), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(dma_eb2, "dma-eb2", "ap-axi", 0x18, 0x1000,
> > +                       BIT(0), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(ce_eb2, "ce-eb2", "ap-axi", 0x18, 0x1000,
> > +                       BIT(1), CLK_IGNORE_UNUSED, 0);
> > +
> > +static struct sprd_clk_common *sc9863a_apahb_gate_clks[] = {
> > +       /* address base is 0x20e00000 */
> > +       &otg_eb.common,
> > +       &dma_eb.common,
> > +       &ce_eb.common,
> > +       &nandc_eb.common,
> > +       &sdio0_eb.common,
> > +       &sdio1_eb.common,
> > +       &sdio2_eb.common,
> > +       &emmc_eb.common,
> > +       &emmc_32k_eb.common,
> > +       &sdio0_32k_eb.common,
> > +       &sdio1_32k_eb.common,
> > +       &sdio2_32k_eb.common,
> > +       &nandc_26m_eb.common,
> > +       &dma_eb2.common,
> > +       &ce_eb2.common,
> > +};
> > +
> > +static struct clk_hw_onecell_data sc9863a_apahb_gate_hws = {
> > +       .hws    = {
> > +               [CLK_OTG_EB]            = &otg_eb.common.hw,
> > +               [CLK_DMA_EB]            = &dma_eb.common.hw,
> > +               [CLK_CE_EB]             = &ce_eb.common.hw,
> > +               [CLK_NANDC_EB]          = &nandc_eb.common.hw,
> > +               [CLK_SDIO0_EB]          = &sdio0_eb.common.hw,
> > +               [CLK_SDIO1_EB]          = &sdio1_eb.common.hw,
> > +               [CLK_SDIO2_EB]          = &sdio2_eb.common.hw,
> > +               [CLK_EMMC_EB]           = &emmc_eb.common.hw,
> > +               [CLK_EMMC_32K_EB]       = &emmc_32k_eb.common.hw,
> > +               [CLK_SDIO0_32K_EB]      = &sdio0_32k_eb.common.hw,
> > +               [CLK_SDIO1_32K_EB]      = &sdio1_32k_eb.common.hw,
> > +               [CLK_SDIO2_32K_EB]      = &sdio2_32k_eb.common.hw,
> > +               [CLK_NANDC_26M_EB]      = &nandc_26m_eb.common.hw,
> > +               [CLK_DMA_EB2]           = &dma_eb2.common.hw,
> > +               [CLK_CE_EB2]            = &ce_eb2.common.hw,
> > +       },
> > +       .num    = CLK_AP_AHB_GATE_NUM,
> > +};
> > +
> > +static const struct sprd_clk_desc sc9863a_apahb_gate_desc = {
> > +       .clk_clks       = sc9863a_apahb_gate_clks,
> > +       .num_clk_clks   = ARRAY_SIZE(sc9863a_apahb_gate_clks),
> > +       .hw_clks        = &sc9863a_apahb_gate_hws,
> > +};
> > +
> > +/* aon gate clocks */
> > +static SPRD_SC_GATE_CLK(adc_eb,        "adc-eb",       "aon-apb", 0x0,
> > +                    0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
>
> There's a lot of CLK_IGNORE_UNUSED. Why? Can you please add a comment in
> the code about why we need this flag or remove the flag?

Ok, will have a look at which clocks don't need this flag.

>
> > +static SPRD_SC_GATE_CLK(fm_eb, "fm-eb",        "aon-apb", 0x0,
> > +                    0x1000, BIT(1), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(tpc_eb,        "tpc-eb",       "aon-apb", 0x0,
> > +                    0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
> > +static SPRD_SC_GATE_CLK(gpio_eb, "gpio-eb",    "aon-apb", 0x0,
> > +                    0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
> [...]
> > +
> > +static const struct sprd_clk_desc sc9863a_apapb_gate_desc = {
> > +       .clk_clks       = sc9863a_apapb_gate,
> > +       .num_clk_clks   = ARRAY_SIZE(sc9863a_apapb_gate),
> > +       .hw_clks        = &sc9863a_apapb_gate_hws,
> > +};
> > +
> > +static const struct of_device_id sprd_sc9863a_clk_ids[] = {
> > +       { .compatible = "sprd,sc9863a-ap-clk",  /* 0x21500000 */
>
> What are the comments? Register addresses?

Yes, they're base address for each group of clocks, it made looking
for these clocks in spec easier, otherwise we have to look for their
base addresses in devicetree.

>
> > +         .data = &sc9863a_ap_clk_desc },
> > +       { .compatible = "sprd,sc9863a-pmu-gate",        /* 0x402b0000 */
> > +         .data = &sc9863a_pmu_gate_desc },
> > +       { .compatible = "sprd,sc9863a-pll",     /* 0x40353000 */
> > +         .data = &sc9863a_pll_desc },
> > +       { .compatible = "sprd,sc9863a-mpll",    /* 0x40359000 */
> > +         .data = &sc9863a_mpll_desc },
> > +       { .compatible = "sprd,sc9863a-rpll",    /* 0x4035c000 */
> > +         .data = &sc9863a_rpll_desc },
> > +       { .compatible = "sprd,sc9863a-dpll",    /* 0x40363000 */
> > +         .data = &sc9863a_dpll_desc },
> > +       { .compatible = "sprd,sc9863a-aon-clk", /* 0x402d0000 */
> > +         .data = &sc9863a_aon_clk_desc },
> > +       { .compatible = "sprd,sc9863a-apahb-gate",      /* 0x20e00000 */
> > +         .data = &sc9863a_apahb_gate_desc },
> > +       { .compatible = "sprd,sc9863a-aonapb-gate",     /* 0x402e0000 */
> > +         .data = &sc9863a_aonapb_gate_desc },
> > +       { .compatible = "sprd,sc9863a-mm-gate", /* 0x60800000 */
> > +         .data = &sc9863a_mm_gate_desc },
> > +       { .compatible = "sprd,sc9863a-mm-clk",  /* 0x60900000 */
> > +         .data = &sc9863a_mm_clk_desc },
> > +       { .compatible = "sprd,sc9863a-vspahb-gate",     /* 0x62000000 */
> > +         .data = &sc9863a_vspahb_gate_desc },
> > +       { .compatible = "sprd,sc9863a-apapb-gate",      /* 0x71300000 */
> > +         .data = &sc9863a_apapb_gate_desc },
> > +       { }
> > +};
> > +MODULE_DEVICE_TABLE(of, sprd_sc9863a_clk_ids);
> > +
> > +static int sc9863a_clk_probe(struct platform_device *pdev)
> > +{
> > +       const struct of_device_id *match;
> > +       const struct sprd_clk_desc *desc;
> > +
> > +       match = of_match_node(sprd_sc9863a_clk_ids, pdev->dev.of_node);
> > +       if (!match) {
> > +               pr_err("%s: of_match_node() failed", __func__);
> > +               return -ENODEV;
> > +       }
>
> Use device_get_match_data() instead.

Ok.

>
> > +
> > +       desc = match->data;
> > +       sprd_clk_regmap_init(pdev, desc);
> > +
> > +       return sprd_clk_probe(&pdev->dev, desc->hw_clks);
> > +}
> > +
> > +static struct platform_driver sc9863a_clk_driver = {
> > +       .probe  = sc9863a_clk_probe,
> > +       .driver = {
> > +               .name   = "sc9863a-clk",
> > +               .of_match_table = sprd_sc9863a_clk_ids,
> > +       },
> > +};
> > +module_platform_driver(sc9863a_clk_driver);
> > +
> > +MODULE_DESCRIPTION("Spreadtrum SC9863A Clock Driver");
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_ALIAS("platform:sc9863a-clk");
>
> Drop the module alias, it doesn't help from what I can recall.

Sure.

Thanks for the review and comments,
Chunyan

Re: [PATCH 5/5] clk: sprd: add clocks support for SC9863A

[Chunyan Zhang]

Hi Stephen,

On Thu, 14 Nov 2019 at 06:19, Stephen Boyd <sboyd@kernel.org> wrote:
>

[cut]

>
> > +static const u64 itable_dpll[5] = {4, 1211000000, 1320000000, 1570000000,
> > +                                  1866000000};
> > +static SPRD_PLL_WITH_ITABLE_1K(dpll0_clk, "dpll0", "dpll0-gate", 0x0,
> > +                                  3, itable_dpll, f_dpll, 240);
> > +static SPRD_PLL_WITH_ITABLE_1K(dpll1_clk, "dpll1", "dpll1-gate", 0x18,
> > +                                  3, itable_dpll, f_dpll, 240);
> > +
> > +static CLK_FIXED_FACTOR(dpll0_933m, "dpll0-933m", "dpll0", 2, 1, 0);
> > +static CLK_FIXED_FACTOR(dpll0_622m3, "dpll0-622m3", "dpll0", 3, 1, 0);
> > +static CLK_FIXED_FACTOR(dpll1_400m, "dpll1-400m", "dpll1", 4, 1, 0);
> > +static CLK_FIXED_FACTOR(dpll1_266m7, "dpll1-266m7", "dpll1", 6, 1, 0);
> > +static CLK_FIXED_FACTOR(dpll1_123m1, "dpll1-123m1", "dpll1", 13, 1, 0);
> > +static CLK_FIXED_FACTOR(dpll1_50m, "dpll1-50m", "dpll1", 32, 1, 0);
> > +
> > +static struct sprd_clk_common *sc9863a_dpll_clks[] = {
> [...]
> > +static SPRD_COMP_CLK(core0_clk, "core0-clk", core_parents, 0xa20,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(core1_clk, "core1-clk", core_parents, 0xa24,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(core2_clk, "core2-clk", core_parents, 0xa28,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(core3_clk, "core3-clk", core_parents, 0xa2c,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(core4_clk, "core4-clk", core_parents, 0xa30,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(core5_clk, "core5-clk", core_parents, 0xa34,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(core6_clk, "core6-clk", core_parents, 0xa38,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(core7_clk, "core7-clk", core_parents, 0xa3c,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_COMP_CLK(scu_clk, "scu-clk", core_parents, 0xa40,
> > +                    0, 3, 8, 3, 0);
> > +static SPRD_DIV_CLK(ace_clk, "ace-clk", "scu-clk", 0xa44,
> > +                   8, 3, 0);
> > +static SPRD_DIV_CLK(axi_periph_clk, "axi-periph-clk", "scu-clk", 0xa48,
> > +                   8, 3, 0);
> > +static SPRD_DIV_CLK(axi_acp_clk, "axi-acp-clk", "scu-clk", 0xa4c,
> > +                   8, 3, 0);
> > +
> > +static const char * const atb_parents[] = { "ext-26m", "twpll-384m",
> > +                                           "twpll-512m", "mpll2" };
> > +static SPRD_COMP_CLK(atb_clk, "atb-clk", atb_parents, 0xa50,
> > +                    0, 2, 8, 3, 0);
> > +static SPRD_DIV_CLK(debug_apb_clk, "debug-apb-clk", "atb-clk", 0xa54,
> > +                   8, 3, 0);
> > +
> > +static const char * const gic_parents[] = { "ext-26m", "twpll-153m6",
> > +                                           "twpll-384m", "twpll-512m" };
>
> Can you use the new way of specifying clk parents instead of using these
> big string lists? That will hopefully cut down on the size of this code
> by reducing all these string lists.

Not sure if I understand correctly - do you mean that switch to use a
reference to clk_parent_data.hw in the driver instead?
like:
https://elixir.bootlin.com/linux/v5.4-rc7/source/drivers/clk/qcom/gcc-sm8150.c#L136

Since if I have to define many clk_parent_data.fw_name strings
instead, it seems not able to reduce the code size, right?

Thanks,
Chunyan

Re: [PATCH 5/5] clk: sprd: add clocks support for SC9863A

[Stephen Boyd]

Quoting Chunyan Zhang (2019-11-17 03:27:15)
> 
> Not sure if I understand correctly - do you mean that switch to use a
> reference to clk_parent_data.hw in the driver instead?
> like:
> https://elixir.bootlin.com/linux/v5.4-rc7/source/drivers/clk/qcom/gcc-sm8150.c#L136
> 

Yes something like that.

> Since if I have to define many clk_parent_data.fw_name strings
> instead, it seems not able to reduce the code size, right?

Ideally there are some internal only clks that can be linked to their
parent with a single clk_hw pointer. That will hopefully keep the size
down somewhat. And if there are any external clks, they can be described
in DT and then only the .fw_name field can be used and the fallback
field .name can be left assigned to NULL.

Re: [PATCH 5/5] clk: sprd: add clocks support for SC9863A

[Chunyan Zhang]

On Mon, 25 Nov 2019 at 09:33, Stephen Boyd <sboyd@kernel.org> wrote:
>
> Quoting Chunyan Zhang (2019-11-17 03:27:15)
> >
> > Not sure if I understand correctly - do you mean that switch to use a
> > reference to clk_parent_data.hw in the driver instead?
> > like:
> > https://elixir.bootlin.com/linux/v5.4-rc7/source/drivers/clk/qcom/gcc-sm8150.c#L136
> >
>
> Yes something like that.
>
> > Since if I have to define many clk_parent_data.fw_name strings
> > instead, it seems not able to reduce the code size, right?
>
> Ideally there are some internal only clks that can be linked to their

If the *internal* clks should be in the same base address, then we
have many external clks as parents, since most of our clks are not
located according to modules which clks serve, but according to clk
type.

> parent with a single clk_hw pointer. That will hopefully keep the size

Since all clks used for a chip are defined in the same driver file, I
actually can use clk_hw pointer directly, that will cut down the size
of this driver code, and also easier for users to look for parents for
one clk (only need to look at driver file).

But not sure if you aggree this way?

> down somewhat. And if there are any external clks, they can be described
> in DT and then only the .fw_name field can be used and the fallback
> field .name can be left assigned to NULL.

Yes, I noticed that. But I still need to add many .fw_name, that will
not be a small count.

Thanks,
Chunyan

Re: [PATCH 5/5] clk: sprd: add clocks support for SC9863A

[Stephen Boyd]

Quoting Chunyan Zhang (2019-11-24 18:10:58)
> On Mon, 25 Nov 2019 at 09:33, Stephen Boyd <sboyd@kernel.org> wrote:
> >
> > Quoting Chunyan Zhang (2019-11-17 03:27:15)
> > >
> > > Not sure if I understand correctly - do you mean that switch to use a
> > > reference to clk_parent_data.hw in the driver instead?
> > > like:
> > > https://elixir.bootlin.com/linux/v5.4-rc7/source/drivers/clk/qcom/gcc-sm8150.c#L136
> > >
> >
> > Yes something like that.
> >
> > > Since if I have to define many clk_parent_data.fw_name strings
> > > instead, it seems not able to reduce the code size, right?
> >
> > Ideally there are some internal only clks that can be linked to their
> 
> If the *internal* clks should be in the same base address, then we
> have many external clks as parents, since most of our clks are not
> located according to modules which clks serve, but according to clk
> type.
> 
> > parent with a single clk_hw pointer. That will hopefully keep the size
> 
> Since all clks used for a chip are defined in the same driver file, I
> actually can use clk_hw pointer directly, that will cut down the size
> of this driver code, and also easier for users to look for parents for
> one clk (only need to look at driver file).
> 
> But not sure if you aggree this way?

If all clks are in the same file then it sounds fine to just use clk_hw
pointers everywhere.

> 
> > down somewhat. And if there are any external clks, they can be described
> > in DT and then only the .fw_name field can be used and the fallback
> > field .name can be left assigned to NULL.
> 
> Yes, I noticed that. But I still need to add many .fw_name, that will
> not be a small count.
> 

Sure. The plan is to get rid of the array of string names to specify
parents. We can debate the size and cost associated with moving away
from that, but it won't change the overall message here that I'd like to
see new drivers use the new way of specifying parents instead of using
strings for topology description.