Re: [Patch v2 02/10] ARM: dts: dra7: add cam clkctrl node

[Tony Lindgren <tony@atomide.com>]

* Benoit Parrot <bparrot@ti.com> [191104 20:49]:
> Add clkctrl nodes for CAM domain.

This too should mention that we need to use custom node naming. Other
than that this looks good to me. Again, I can queue the dts changes once
I have an immutable clock changes branch to use as base from Tero.

And up to Tero to consider if he wants to pick this clock node patch too.

Regards,

Tony

> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> ---
>  arch/arm/boot/dts/dra7xx-clocks.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
> index d1c2406ec71c..199f8d483f75 100644
> --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
> +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
> @@ -1734,6 +1734,20 @@
>  		};
>  	};
>  
> +	cam_cm: cam-cm@1000 {
> +		compatible = "ti,omap4-cm";
> +		reg = <0x1000 0x100>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0x1000 0x100>;
> +
> +		cam_clkctrl: cam-clkctrl@20 {
> +			compatible = "ti,clkctrl";
> +			reg = <0x20 0x2c>;
> +			#clock-cells = <2>;
> +		};
> +	};
> +
>  	dss_cm: dss-cm@1100 {
>  		compatible = "ti,omap4-cm";
>  		reg = <0x1100 0x100>;
> -- 
> 2.17.1
>