From: Benoit Parrot <bparrot@ti.com>
To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
Cc: <linux-omap@vger.kernel.org>, <linux-clk@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Benoit Parrot <bparrot@ti.com>
Subject: [Patch v3 04/10] ARM: dts: dra7-l4: Add ti-sysc node for CAM
Date: Tue, 12 Nov 2019 08:27:47 -0600 [thread overview]
Message-ID: <20191112142753.22976-5-bparrot@ti.com> (raw)
In-Reply-To: <20191112142753.22976-1-bparrot@ti.com>
Add CAM nodes as a child of l4 interconnect in order for it to probe
using ti-sysc.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
arch/arm/boot/dts/dra7-l4.dtsi | 43 +++++++++++++++++++++++++++++-----
1 file changed, 37 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 0917231a20e2..8f5c26a4f7c8 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -4135,27 +4135,58 @@
};
target-module@170000 { /* 0x48970000, ap 21 0a.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x170010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x170000 0x10000>;
+ status = "disabled";
};
target-module@190000 { /* 0x48990000, ap 23 2e.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x190010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x190000 0x10000>;
+ status = "disabled";
};
target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x1b0000 0x4>,
+ <0x1b0010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x1b0000 0x10000>;
+ status = "disabled";
};
target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
--
2.17.1
next prev parent reply other threads:[~2019-11-12 14:25 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-12 14:27 [Patch v3 00/10] ARM: dts: dra7: add cal nodes Benoit Parrot
2019-11-12 14:27 ` [Patch v3 01/10] clk: ti: dra7: add cam clkctrl data Benoit Parrot
2019-11-12 15:27 ` Tony Lindgren
2019-11-18 17:38 ` Rob Herring
2019-11-12 14:27 ` [Patch v3 02/10] ARM: dts: dra7: add cam clkctrl node Benoit Parrot
2019-11-12 15:29 ` Tony Lindgren
2019-11-12 14:27 ` [Patch v3 03/10] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only Benoit Parrot
2019-11-12 15:31 ` Tony Lindgren
2019-11-12 14:27 ` Benoit Parrot [this message]
2019-11-12 14:27 ` [Patch v3 05/10] ARM: dts: DRA72: Add CAL dtsi node Benoit Parrot
2019-11-12 15:34 ` Tony Lindgren
2019-11-12 14:27 ` [Patch v3 06/10] arm: dts: dra72-evm-common: Add entries for the CSI2 cameras Benoit Parrot
2019-11-12 14:27 ` [Patch v3 07/10] arm: dtsi: dra76x: Add CAL dtsi node Benoit Parrot
2019-11-12 14:27 ` [Patch v3 08/10] arm: dts: dra76-evm: Add CAL and OV5640 nodes Benoit Parrot
2019-11-12 14:27 ` [Patch v3 09/10] arm64: dts: k3-am65-main Add CAL node Benoit Parrot
2019-11-12 15:38 ` Tony Lindgren
2019-11-12 14:27 ` [Patch v3 10/10] arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera Benoit Parrot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191112142753.22976-5-bparrot@ti.com \
--to=bparrot@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).