[PATCH AUTOSEL 4.14 036/150] clk: mmp2: fix the clock id for sdh2_clk and sdh3_clk

[PATCH AUTOSEL 4.14 036/150] clk: mmp2: fix the clock id for sdh2_clk and sdh3_clk

[Sasha Levin]

From: Lubomir Rintel <lkundrak@v3.sk>

[ Upstream commit 4917fb90eec7c26dac1497ada3bd4a325f670fcc ]

A typo that makes it impossible to get the correct clocks for
MMP2_CLK_SDH2 and MMP2_CLK_SDH3.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Fixes: 1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/mmp/clk-of-mmp2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 0fc75c3959570..d083b860f0833 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -227,8 +227,8 @@ static struct mmp_param_gate_clk apmu_gate_clks[] = {
 	/* The gate clocks has mux parent. */
 	{MMP2_CLK_SDH0, "sdh0_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH0, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
 	{MMP2_CLK_SDH1, "sdh1_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
-	{MMP2_CLK_SDH1, "sdh2_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH2, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
-	{MMP2_CLK_SDH1, "sdh3_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH3, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+	{MMP2_CLK_SDH2, "sdh2_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH2, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+	{MMP2_CLK_SDH3, "sdh3_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH3, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
 	{MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1b, 0x1b, 0x0, 0, &disp0_lock},
 	{MMP2_CLK_DISP0_SPHY, "disp0_sphy_clk", "disp0_sphy_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1024, 0x1024, 0x0, 0, &disp0_lock},
 	{MMP2_CLK_DISP1, "disp1_clk", "disp1_div", CLK_SET_RATE_PARENT, APMU_DISP1, 0x1b, 0x1b, 0x0, 0, &disp1_lock},
-- 
2.20.1

[PATCH AUTOSEL 4.14 037/150] clk: at91: audio-pll: fix audio pmc type

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 7fa75007b7d7421aea59ff2b12ab1bd65a5abfa6 ]

The allocation for the audio pmc is using the size of struct clk_audio_pad
instead of struct clk_audio_pmc. This works fine because the former is
larger than the latter but it is safer to be correct.

Fixes: ("0865805d82d4 clk: at91: add audio pll clock drivers")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/at91/clk-audio-pll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/at91/clk-audio-pll.c b/drivers/clk/at91/clk-audio-pll.c
index da7bafcfbe706..b3eaf654fac98 100644
--- a/drivers/clk/at91/clk-audio-pll.c
+++ b/drivers/clk/at91/clk-audio-pll.c
@@ -509,7 +509,7 @@ static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
 
 static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
 {
-	struct clk_audio_pad *apmc_ck;
+	struct clk_audio_pmc *apmc_ck;
 	struct clk_init_data init = {};
 
 	apmc_ck = kzalloc(sizeof(*apmc_ck), GFP_KERNEL);
-- 
2.20.1

[PATCH AUTOSEL 4.14 117/150] clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock

[Sasha Levin]

From: Icenowy Zheng <icenowy@aosc.io>

[ Upstream commit 859783d1390035e29ba850963bded2b4ffdf43b5 ]

In the user manual of A64 SoC, the bit 22 and 23 of pll-mipi control
register is called "LDO{1,2}_EN", and according to the BSP source code
from Allwinner , the LDOs are enabled during the clock's enabling
process.

The clock failed to generate output if the two LDOs are not enabled.

Add the two bits to the clock's gate bits, so that the LDOs are enabled
when the PLL is enabled.

Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 2bb4cabf802f0..36a30a3cfad71 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -158,7 +158,12 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
 #define SUN50I_A64_PLL_MIPI_REG		0x040
 
 static struct ccu_nkm pll_mipi_clk = {
-	.enable		= BIT(31),
+	/*
+	 * The bit 23 and 22 are called "LDO{1,2}_EN" on the SoC's
+	 * user manual, and by experiments the PLL doesn't work without
+	 * these bits toggled.
+	 */
+	.enable		= BIT(31) | BIT(23) | BIT(22),
 	.lock		= BIT(28),
 	.n		= _SUNXI_CCU_MULT(8, 4),
 	.k		= _SUNXI_CCU_MULT_MIN(4, 2, 2),
-- 
2.20.1