Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Brian Masney <masneyb@onstation.org>
To: sboyd@kernel.org, dmitry.torokhov@gmail.com, robh+dt@kernel.org
Cc: mark.rutland@arm.com, agross@kernel.org,
	bjorn.andersson@linaro.org, mturquette@baylibre.com,
	linux-input@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-clk@vger.kernel.org
Subject: [PATCH 2/7] dt-bindings: Input: drop msm-vibrator in favor of clk-vibrator
Date: Wed,  4 Dec 2019 19:24:58 -0500
Message-ID: <20191205002503.13088-3-masneyb@onstation.org> (raw)
In-Reply-To: <20191205002503.13088-1-masneyb@onstation.org>

Let's drop the msm-vibrator bindings so that the more generic
clk-vibrator can be used instead. No one is currently using these
bindings so this won't affect any users.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
 .../bindings/input/msm-vibrator.txt           | 36 -------------------
 1 file changed, 36 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/msm-vibrator.txt

diff --git a/Documentation/devicetree/bindings/input/msm-vibrator.txt b/Documentation/devicetree/bindings/input/msm-vibrator.txt
deleted file mode 100644
index 8dcf014ef2e5..000000000000
--- a/Documentation/devicetree/bindings/input/msm-vibrator.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Device tree bindings for the Qualcomm MSM vibrator
-
-Required properties:
-
-  - compatible: Should be one of
-		"qcom,msm8226-vibrator"
-		"qcom,msm8974-vibrator"
-  - reg: the base address and length of the IO memory for the registers.
-  - pinctrl-names: set to default.
-  - pinctrl-0: phandles pointing to pin configuration nodes. See
-               Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-  - clock-names: set to pwm
-  - clocks: phandle of the clock. See
-            Documentation/devicetree/bindings/clock/clock-bindings.txt
-  - enable-gpios: GPIO that enables the vibrator.
-
-Optional properties:
-
-  - vcc-supply: phandle to the regulator that provides power to the sensor.
-
-Example from a LG Nexus 5 (hammerhead) phone:
-
-vibrator@fd8c3450 {
-	reg = <0xfd8c3450 0x400>;
-	compatible = "qcom,msm8974-vibrator";
-
-	vcc-supply = <&pm8941_l19>;
-
-	clocks = <&mmcc CAMSS_GP1_CLK>;
-	clock-names = "pwm";
-
-	enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&vibrator_pin>;
-};
-- 
2.21.0


  parent reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-05  0:24 [PATCH 0/7] qcom: add clk-vibrator driver Brian Masney
2019-12-05  0:24 ` [PATCH 1/7] clk: qcom: add support for setting the duty cycle Brian Masney
2019-12-05  0:24 ` Brian Masney [this message]
2019-12-05  0:24 ` [PATCH 3/7] Input: drop msm-vibrator in favor of clk-vibrator driver Brian Masney
2019-12-05  0:25 ` [PATCH 4/7] dt-bindings: Input: introduce new clock vibrator bindings Brian Masney
2019-12-05 13:56   ` Rob Herring
2019-12-05  0:25 ` [PATCH 5/7] Input: introduce new clock vibrator driver Brian Masney
2019-12-05  0:25 ` [PATCH 6/7] ARM: qcom_defconfig: drop msm-vibrator in favor of clk-vibrator driver Brian Masney
2019-12-05  0:25 ` [PATCH 7/7] ARM: dts: qcom: msm8974-hammerhead: add support for vibrator Brian Masney

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191205002503.13088-3-masneyb@onstation.org \
    --to=masneyb@onstation.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git