From: Lubomir Rintel <lkundrak@v3.sk>
To: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>,
Kishon Vijay Abraham I <kishon@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-clk@vger.kernel.org, soc@kernel.org,
Lubomir Rintel <lkundrak@v3.sk>
Subject: [PATCH 3/5] dt-bindings: phy: Add binding for marvell,mmp3-hsic-phy
Date: Fri, 20 Dec 2019 07:53:12 +0100 [thread overview]
Message-ID: <20191220065314.237624-4-lkundrak@v3.sk> (raw)
In-Reply-To: <20191220065314.237624-1-lkundrak@v3.sk>
This is the PHY chip for USB HSIC on MMP3 platform.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
.../bindings/phy/marvell,mmp3-hsic-phy.yaml | 41 +++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
new file mode 100644
index 0000000000000..7917a95cda78d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright 2019 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/marvell,mmp3-hsic-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Marvell MMP3 HSIC PHY
+
+maintainers:
+ - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+ compatible:
+ const: marvell,mmp3-hsic-phy
+
+ reg:
+ maxItems: 1
+ description: base address of the device
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to reset
+
+ "#phy-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - "#phy-cells"
+
+examples:
+ - |
+ hsic-phy@f0001800 {
+ compatible = "marvell,mmp3-hsic-phy";
+ reg = <0xf0001800 0x40>;
+ reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+ #phy-cells = <0>;
+ };
--
2.24.1
next prev parent reply other threads:[~2019-12-20 6:53 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-20 6:53 [PATCH 1/5] Enable HSIC on MMP3 SoC Lubomir Rintel
2019-12-20 6:53 ` [PATCH 1/5] dt-bindings: marvell,mmp2: Add clock ids for the HSIC clocks Lubomir Rintel
2019-12-23 19:32 ` Stephen Boyd
2019-12-20 6:53 ` [PATCH 2/5] clk: mmp2: Add " Lubomir Rintel
2019-12-23 19:33 ` Stephen Boyd
2019-12-20 6:53 ` Lubomir Rintel [this message]
2020-01-07 22:20 ` [PATCH 3/5] dt-bindings: phy: Add binding for marvell,mmp3-hsic-phy Rob Herring
2019-12-20 6:53 ` [PATCH 4/5] ARM: dts: mmp3: Add HSIC controllers Lubomir Rintel
2019-12-20 7:05 ` Lubomir Rintel
2020-01-06 19:22 ` Olof Johansson
2019-12-23 9:57 ` kbuild test robot
2019-12-20 6:53 ` [PATCH 5/5] ARM: dts: mmp3-dell-ariel: Enable the HSIC Lubomir Rintel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191220065314.237624-4-lkundrak@v3.sk \
--to=lkundrak@v3.sk \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).