From: Lubomir Rintel <lkundrak@v3.sk>
To: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>,
Kishon Vijay Abraham I <kishon@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-clk@vger.kernel.org, soc@kernel.org,
Lubomir Rintel <lkundrak@v3.sk>
Subject: [PATCH 4/5] ARM: dts: mmp3: Add HSIC controllers
Date: Fri, 20 Dec 2019 07:53:13 +0100 [thread overview]
Message-ID: <20191220065314.237624-5-lkundrak@v3.sk> (raw)
In-Reply-To: <20191220065314.237624-1-lkundrak@v3.sk>
There are two on MMP3, along with the PHYs. The PHYs are made compatible
with the NOP transceiver, since there's no driver for the time being and
they're likely configured by the firmware.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
arch/arm/boot/dts/mmp3.dtsi | 44 +++++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
index d9762de0ed34b..36c50706e60e0 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/mmp3.dtsi
@@ -201,6 +201,50 @@ usb_otg0: usb-otg@d4208000 {
status = "disabled";
};
+ hsic_phy0: hsic-phy@f0001800 {
+ compatible = "marvell,mmp3-hsic-phy",
+ "usb-nop-xceiv",
+ reg = <0xf0001800 0x40>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ hsic0: hsic@f0001000 {
+ compatible = "marvell,pxau2o-ehci";
+ reg = <0xf0001000 0x200>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_clocks MMP2_CLK_USBHSIC0>;
+ clock-names = "USBCLK";
+ phys = <&hsic_phy0>;
+ phy-names = "usb";
+ phy_type = "hsic";
+ #address-cells = <0x01>;
+ #size-cells = <0x00>;
+ status = "disabled";
+ };
+
+ hsic_phy1: hsic-phy@f0002800 {
+ compatible = "marvell,mmp3-hsic-phy",
+ "usb-nop-xceiv",
+ reg = <0xf0002800 0x40>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ hsic1: hsic@f0002000 {
+ compatible = "marvell,pxau2o-ehci";
+ reg = <0xf0002000 0x200>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_clocks MMP2_CLK_USBHSIC1>;
+ clock-names = "USBCLK";
+ phys = <&hsic_phy1>;
+ phy-names = "usb";
+ phy_type = "hsic";
+ #address-cells = <0x01>;
+ #size-cells = <0x00>;
+ status = "disabled";
+ };
+
mmc1: mmc@d4280000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xd4280000 0x120>;
--
2.24.1
next prev parent reply other threads:[~2019-12-20 6:53 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-20 6:53 [PATCH 1/5] Enable HSIC on MMP3 SoC Lubomir Rintel
2019-12-20 6:53 ` [PATCH 1/5] dt-bindings: marvell,mmp2: Add clock ids for the HSIC clocks Lubomir Rintel
2019-12-23 19:32 ` Stephen Boyd
2019-12-20 6:53 ` [PATCH 2/5] clk: mmp2: Add " Lubomir Rintel
2019-12-23 19:33 ` Stephen Boyd
2019-12-20 6:53 ` [PATCH 3/5] dt-bindings: phy: Add binding for marvell,mmp3-hsic-phy Lubomir Rintel
2020-01-07 22:20 ` Rob Herring
2019-12-20 6:53 ` Lubomir Rintel [this message]
2019-12-20 7:05 ` [PATCH 4/5] ARM: dts: mmp3: Add HSIC controllers Lubomir Rintel
2020-01-06 19:22 ` Olof Johansson
2019-12-23 9:57 ` kbuild test robot
2019-12-20 6:53 ` [PATCH 5/5] ARM: dts: mmp3-dell-ariel: Enable the HSIC Lubomir Rintel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191220065314.237624-5-lkundrak@v3.sk \
--to=lkundrak@v3.sk \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).