Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v5 0/5] add Amlogic A1 clock controller driver
@ 2019-12-27  9:46 Jian Hu
  2019-12-27  9:46 ` [PATCH v5 1/5] dt-bindings: clock: meson: add A1 PLL clock controller bindings Jian Hu
                   ` (4 more replies)
  0 siblings, 5 replies; 17+ messages in thread
From: Jian Hu @ 2019-12-27  9:46 UTC (permalink / raw)
  To: Jerome Brunet, Neil Armstrong
  Cc: Jian Hu, Kevin Hilman, Rob Herring, Martin Blumenstingl,
	Michael Turquette, Stephen Boyd, Qiufang Dai, Jianxin Pan,
	Victor Wan, Chandle Zou, linux-clk, linux-amlogic,
	linux-arm-kernel, linux-kernel, devicetree

add support for Amlogic A1 clock driver, the clock includes 
three parts: peripheral clocks, pll clocks, CPU clocks.
sys pll and CPU clocks will be sent in next patch.

Changes since v4 at [5]:
- change yaml GPL
- drop meson-eeclk.c patch, add probe function in each driver
- add CLK_IS_CRITICAL for sys_clk clock, drop the flag for sys_a and sys_b
- add new parm for pll, add protection for rst parm
- drop flag for a1_fixed_pll
- remove the same comment for fclk_div, add "refer to"
- add critical flag for a1_sys_clk
- remove rtc table
- rename a1_dspa_en_dspa and a1_dspb_en_dspb
- remove useless comment

Changes since v3 at [3]:
-fix reparenting orphan failed, it depends on jerome's patch [4]
-fix changelist in v3 about reparenting orphan
-remove the dts patch 

Changes since v2 at [2]:
-add probe function for A1
-seperate the clock driver into two patch
-change some clock flags and ops
-add support for a1 PLL ops
-add A1 clock node
-fix reparenting orphan clock failed, registering xtal_fixpll
 and xtal_hifipll after the provider registration, it is not
 a best way.

Changes since v1 at [1]:
-place A1 config alphabetically
-add actual reason for RO ops, CLK_IS_CRITICAL, CLK_IGNORE_UNUSED
-separate the driver into two driver: peripheral and pll driver
-delete CLK_IGNORE_UNUSED flag for pwm b/c/d/e/f clock, dsp clock
-delete the change in Kconfig.platforms, address to Kevin alone
-remove the useless comments
-modify the meson pll driver to support A1 PLLs

[1] https://lkml.kernel.org/r/1569411888-98116-1-git-send-email-jian.hu@amlogic.com
[2] https://lkml.kernel.org/r/1571382865-41978-1-git-send-email-jian.hu@amlogic.com
[3] https://lkml.kernel.org/r/20191129144605.182774-1-jian.hu@amlogic.com
[4] https://lkml.kernel.org/r/20191203080805.104628-1-jbrunet@baylibre.com
[5] https://lkml.kernel.org/r/20191206074052.15557-1-jian.hu@amlogic.com

Jian Hu (5):
  dt-bindings: clock: meson: add A1 PLL clock controller bindings
  clk: meson: add support for A1 PLL clock ops
  clk: meson: a1: add support for Amlogic A1 PLL clock driver
  dt-bindings: clock: meson: add A1 peripheral clock controller bindings
  clk: meson: a1: add support for Amlogic A1 Peripheral clock driver

 .../bindings/clock/amlogic,a1-clkc.yaml       |   67 +
 .../bindings/clock/amlogic,a1-pll-clkc.yaml   |   54 +
 drivers/clk/meson/Kconfig                     |   18 +
 drivers/clk/meson/Makefile                    |    2 +
 drivers/clk/meson/a1-pll.c                    |  374 +++
 drivers/clk/meson/a1-pll.h                    |   56 +
 drivers/clk/meson/a1.c                        | 2263 +++++++++++++++++
 drivers/clk/meson/a1.h                        |  120 +
 drivers/clk/meson/clk-pll.c                   |   40 +-
 drivers/clk/meson/clk-pll.h                   |    2 +
 include/dt-bindings/clock/a1-clkc.h           |   98 +
 include/dt-bindings/clock/a1-pll-clkc.h       |   16 +
 12 files changed, 3105 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
 create mode 100644 drivers/clk/meson/a1-pll.c
 create mode 100644 drivers/clk/meson/a1-pll.h
 create mode 100644 drivers/clk/meson/a1.c
 create mode 100644 drivers/clk/meson/a1.h
 create mode 100644 include/dt-bindings/clock/a1-clkc.h
 create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h

-- 
2.24.0


^ permalink raw reply	[flat|nested] 17+ messages in thread

end of thread, back to index

Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-27  9:46 [PATCH v5 0/5] add Amlogic A1 clock controller driver Jian Hu
2019-12-27  9:46 ` [PATCH v5 1/5] dt-bindings: clock: meson: add A1 PLL clock controller bindings Jian Hu
2020-01-03 22:29   ` Rob Herring
2020-01-10 15:36   ` Jerome Brunet
2020-01-16  5:50     ` Jian Hu
2019-12-27  9:46 ` [PATCH v5 2/5] clk: meson: add support for A1 PLL clock ops Jian Hu
2019-12-27 16:53   ` Martin Blumenstingl
2020-01-09  6:55     ` Jian Hu
2019-12-27  9:46 ` [PATCH v5 3/5] clk: meson: a1: add support for Amlogic A1 PLL clock driver Jian Hu
2019-12-27 17:04   ` Martin Blumenstingl
2020-01-09  7:55     ` Jian Hu
2019-12-27  9:46 ` [PATCH v5 4/5] dt-bindings: clock: meson: add A1 peripheral clock controller bindings Jian Hu
2020-01-10 15:38   ` Jerome Brunet
2020-01-16  6:19     ` Jian Hu
2019-12-27  9:46 ` [PATCH v5 5/5] clk: meson: a1: add support for Amlogic A1 Peripheral clock driver Jian Hu
2019-12-27 17:22   ` Martin Blumenstingl
2020-01-09 11:11     ` Jian Hu

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git