Linux-Clk Archive on
 help / color / Atom feed
* [PATCH] clk: renesas: Prepare for split of R-Car H3 config symbol
@ 2019-12-30  8:09 Geert Uytterhoeven
  2020-01-07 23:29 ` Niklas Söderlund
  0 siblings, 1 reply; 2+ messages in thread
From: Geert Uytterhoeven @ 2019-12-30  8:09 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd
  Cc: linux-renesas-soc, linux-clk, Geert Uytterhoeven

Despite using the same compatible values ("r8a7795"-based) because of
historical reasons, R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+
(R8A77951) are really different SoCs, with different part numbers.
Hence the SoC configuration symbol will be split in two separate config

As the Clock Pulse Generator / Module Standby and Software Reset blocks
in both SoCs are very similar, they will keep on sharing a driver.
Extend the dependency of CONFIG_CLK_R8A7795, to prepare for the split.

Signed-off-by: Geert Uytterhoeven <>
To be queued in clk-renesas-for-v5.6.

This complements, but has no dependencies on "[PATCH 0/5] arm64:
renesas: Split/rename R-Car H3 support"
 drivers/clk/renesas/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 94ef2bac289fb45a..250d8165167aa013 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -20,7 +20,7 @@ config CLK_RENESAS
 	select CLK_R8A7791 if ARCH_R8A7791 || ARCH_R8A7793
 	select CLK_R8A7792 if ARCH_R8A7792
 	select CLK_R8A7794 if ARCH_R8A7794
-	select CLK_R8A7795 if ARCH_R8A7795
+	select CLK_R8A7795 if ARCH_R8A77950 || ARCH_R8A77951 || ARCH_R8A7795
 	select CLK_R8A77960 if ARCH_R8A77960
 	select CLK_R8A77961 if ARCH_R8A77961
 	select CLK_R8A77965 if ARCH_R8A77965

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-30  8:09 [PATCH] clk: renesas: Prepare for split of R-Car H3 config symbol Geert Uytterhoeven
2020-01-07 23:29 ` Niklas Söderlund

Linux-Clk Archive on

Archives are clonable:
	git clone --mirror linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ \
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone