Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Rob Herring <robh@kernel.org>
To: Anson Huang <Anson.Huang@nxp.com>
Cc: mturquette@baylibre.com, sboyd@kernel.org, mark.rutland@arm.com,
	shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com,
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Linux-imx@nxp.com
Subject: Re: [PATCH 1/3] dt-bindings: clock: Convert i.MX8MQ to json-schema
Date: Mon, 13 Jan 2020 15:27:35 -0600
Message-ID: <20200113212735.GA9275@bogus> (raw)
In-Reply-To: <1578642914-838-1-git-send-email-Anson.Huang@nxp.com>

On Fri, Jan 10, 2020 at 03:55:12PM +0800, Anson Huang wrote:
> Convert the i.MX8MQ clock binding to DT schema format using json-schema
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
>  .../devicetree/bindings/clock/imx8mq-clock.txt     | 20 ------
>  .../devicetree/bindings/clock/imx8mq-clock.yaml    | 72 ++++++++++++++++++++++
>  2 files changed, 72 insertions(+), 20 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/imx8mq-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/imx8mq-clock.yaml

Fails 'make dt_binding_check':

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/imx8mn-clock.example.dt.yaml: 
clock-controller@30380000: clock-names:0: 'ckil' was expected
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/imx8mn-clock.example.dt.yaml: 
clock-controller@30380000: clock-names:1: 'osc_25m' was expected
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/imx8mn-clock.example.dt.yaml: 
clock-controller@30380000: clock-names:2: 'osc_27m' was expected
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/imx8mn-clock.example.dt.yaml: 
clock-controller@30380000: clock-names:3: 'clk_ext1' was expected
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/imx8mn-clock.example.dt.yaml: 
clock-controller@30380000: clock-names:4: 'clk_ext2' was expected
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/imx8mn-clock.example.dt.yaml: 
clock-controller@30380000: clock-names:5: 'clk_ext3' was expected
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/imx8mn-clock.example.dt.yaml: 
clock-controller@30380000: clock-names: ['osc_32k', 'osc_24m', 'clk_ext1', 'clk_ext2', 'clk_ext3', 'clk_ext4'] is too short
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/imx8mn-clock.example.dt.yaml: 
clock-controller@30380000: clocks: [[1], [2], [3], [4], [5], [6]] is too short

> 
> diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt
> deleted file mode 100644
> index 52de826..0000000
> --- a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt
> +++ /dev/null
> @@ -1,20 +0,0 @@
> -* Clock bindings for NXP i.MX8M Quad
> -
> -Required properties:
> -- compatible: Should be "fsl,imx8mq-ccm"
> -- reg: Address and length of the register set
> -- #clock-cells: Should be <1>
> -- clocks: list of clock specifiers, must contain an entry for each required
> -          entry in clock-names
> -- clock-names: should include the following entries:
> -    - "ckil"
> -    - "osc_25m"
> -    - "osc_27m"
> -    - "clk_ext1"
> -    - "clk_ext2"
> -    - "clk_ext3"
> -    - "clk_ext4"
> -
> -The clock consumer should specify the desired clock by having the clock
> -ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx8mq-clock.h
> -for the full list of i.MX8M Quad clock IDs.
> diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml
> new file mode 100644
> index 0000000..881c01c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bindings/clock/imx8mq-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX8M Quad Clock Control Module Binding
> +
> +maintainers:
> +  - Anson Huang <Anson.Huang@nxp.com>
> +
> +description: |
> +  NXP i.MX8M Quad clock control module is an integrated clock controller, which
> +  generates and supplies to all modules.
> +
> +properties:
> +  compatible:
> +    const: fsl,imx8mn-ccm

Wrong compatible...

> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: 32k osc
> +      - description: 25m osc
> +      - description: 27m osc
> +      - description: ext1 clock input
> +      - description: ext2 clock input
> +      - description: ext3 clock input
> +      - description: ext4 clock input
> +
> +  clock-names:
> +    items:
> +      - const: ckil
> +      - const: osc_25m
> +      - const: osc_27m
> +      - const: clk_ext1
> +      - const: clk_ext2
> +      - const: clk_ext3
> +      - const: clk_ext4
> +
> +  '#clock-cells':
> +    const: 1
> +    description:
> +      The clock consumer should specify the desired clock by having the clock
> +      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h
> +      for the full list of i.MX8M Quad clock IDs.
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - '#clock-cells'
> +
> +examples:
> +  # Clock Control Module node:
> +  - |
> +    clk: clock-controller@30380000 {
> +        compatible = "fsl,imx8mq-ccm";
> +        reg = <0x30380000 0x10000>;
> +        #clock-cells = <1>;
> +        clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
> +                 <&clk_ext1>, <&clk_ext2>,
> +                 <&clk_ext3>, <&clk_ext4>;
> +        clock-names = "ckil", "osc_25m", "osc_27m",
> +                      "clk_ext1", "clk_ext2",
> +                      "clk_ext3", "clk_ext4";
> +    };
> +
> +...
> -- 
> 2.7.4
> 

  parent reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-10  7:55 Anson Huang
2020-01-10  7:55 ` [PATCH 2/3] dt-bindings: clock: Convert i.MX8MM " Anson Huang
2020-01-10  7:55 ` [PATCH 3/3] dt-bindings: clock: Refine i.MX8MN clock binding Anson Huang
2020-01-13 21:27 ` Rob Herring [this message]
2020-01-14  1:25   ` [PATCH 1/3] dt-bindings: clock: Convert i.MX8MQ to json-schema Anson Huang
2020-01-14 13:57     ` Rob Herring

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200113212735.GA9275@bogus \
    --to=robh@kernel.org \
    --cc=Anson.Huang@nxp.com \
    --cc=Linux-imx@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=s.hauer@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git