Linux-Clk Archive on
 help / color / Atom feed
* [GIT PULL]: Amlogic clock updates for v5.6
@ 2020-01-10 16:11 Jerome Brunet
  2020-01-22  0:11 ` Stephen Boyd
  0 siblings, 1 reply; 2+ messages in thread
From: Jerome Brunet @ 2020-01-10 16:11 UTC (permalink / raw)
  To: Stephen Boyd, Michael Turquette
  Cc: Neil Armstrong, Kevin Hilman, linux-clk, linux-amlogic

Hi Stephen

Here are the updates for the amlogic clocks for this cycle.
The bulk of it is a clean up of the 32bits SoC clock controllers by


The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:

  Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)

are available in the Git repository at:

  git:// tags/clk-meson-v5.6-1

for you to fetch changes up to 64c76b31774db5a0c0ce8df13aef618912136e32:

  clk: clarify that clk_set_rate() does updates from top to bottom (2020-01-07 11:31:47 +0100)

Amlogic clock updates for v5.6:
* Add meson8b DDR clock controller
* Add input clocks to meson8b controllers
* Fix meson8b mali clock update using the glitch free mux
* Fix pll driver division by zero init

Jerome Brunet (2):
      clk: meson: g12a: fix missing uart2 in regmap table
      Merge branch 'v5.5/fixes' into v5.6/drivers

Martin Blumenstingl (9):
      dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding
      dt-bindings: clock: meson8b: add the clock inputs
      clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller
      clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier
      clk: meson: meson8b: change references to the XTAL clock to use [fw_]name
      clk: meson: meson8b: don't register the XTAL clock when provided via OF
      clk: meson: meson8b: use of_clk_hw_register to register the clocks
      clk: meson: meson8b: make the CCF use the glitch-free mali mux
      clk: clarify that clk_set_rate() does updates from top to bottom

Remi Pommarel (1):
      clk: meson: pll: Fix by 0 division in __pll_params_to_rate()

 .../bindings/clock/amlogic,meson8-ddr-clkc.yaml    |  50 +++++++
 .../bindings/clock/amlogic,meson8b-clkc.txt        |   5 +
 drivers/clk/meson/Makefile                         |   2 +-
 drivers/clk/meson/clk-pll.c                        |   9 ++
 drivers/clk/meson/g12a.c                           |   1 +
 drivers/clk/meson/meson8-ddr.c                     | 149 +++++++++++++++++++++
 drivers/clk/meson/meson8b.c                        | 124 +++++++++--------
 include/dt-bindings/clock/meson8-ddr-clkc.h        |   4 +
 include/linux/clk.h                                |   3 +
 9 files changed, 291 insertions(+), 56 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
 create mode 100644 drivers/clk/meson/meson8-ddr.c
 create mode 100644 include/dt-bindings/clock/meson8-ddr-clkc.h

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-10 16:11 [GIT PULL]: Amlogic clock updates for v5.6 Jerome Brunet
2020-01-22  0:11 ` Stephen Boyd

Linux-Clk Archive on

Archives are clonable:
	git clone --mirror linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ \
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone