[PATCH AUTOSEL 5.5 020/542] clk: meson: g12a: fix missing uart2 in regmap table

[PATCH AUTOSEL 5.5 020/542] clk: meson: g12a: fix missing uart2 in regmap table

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit b1b3f0622a9d52ac19a63619911823c89a4d85a4 ]

UART2 peripheral is missing from the regmap fixup table of the g12a family
clock controller. As it is, any access to this clock would Oops, which is
not great.

Add the clock to the table to fix the problem.

Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller")
Reported-by: Dmitry Shmidt <dimitrysh@google.com>
Tested-by: Dmitry Shmidt <dimitrysh@google.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/meson/g12a.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index b3af61cc6fb94..d2760a021301d 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -4692,6 +4692,7 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
 	&g12a_bt656,
 	&g12a_usb1_to_ddr,
 	&g12a_mmc_pclk,
+	&g12a_uart2,
 	&g12a_vpu_intr,
 	&g12a_gic,
 	&g12a_sd_emmc_a_clk0,
-- 
2.20.1

[PATCH AUTOSEL 5.5 021/542] clk: meson: pll: Fix by 0 division in __pll_params_to_rate()

[Sasha Levin]

From: Remi Pommarel <repk@triplefau.lt>

[ Upstream commit d8488a41800d9f5c80bc0d17b9cc2c91b4841464 ]

Some meson pll registers can be initialized with 0 as N value, introducing
the following division by 0 when computing rate :

  UBSAN: Undefined behaviour in drivers/clk/meson/clk-pll.c:75:9
  division by zero
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc3-608075-g86c9af8630e1-dirty #400
  Call trace:
   dump_backtrace+0x0/0x1c0
   show_stack+0x14/0x20
   dump_stack+0xc4/0x100
   ubsan_epilogue+0x14/0x68
   __ubsan_handle_divrem_overflow+0x98/0xb8
   __pll_params_to_rate+0xdc/0x140
   meson_clk_pll_recalc_rate+0x278/0x3a0
   __clk_register+0x7c8/0xbb0
   devm_clk_hw_register+0x54/0xc0
   meson_eeclkc_probe+0xf4/0x1a0
   platform_drv_probe+0x54/0xd8
   really_probe+0x16c/0x438
   driver_probe_device+0xb0/0xf0
   device_driver_attach+0x94/0xa0
   __driver_attach+0x70/0x108
   bus_for_each_dev+0xd8/0x128
   driver_attach+0x30/0x40
   bus_add_driver+0x1b0/0x2d8
   driver_register+0xbc/0x1d0
   __platform_driver_register+0x78/0x88
   axg_driver_init+0x18/0x20
   do_one_initcall+0xc8/0x24c
   kernel_init_freeable+0x2b0/0x344
   kernel_init+0x10/0x128
   ret_from_fork+0x10/0x18

This checks if N is null before doing the division.

Fixes: 7a29a869434e ("clk: meson: Add support for Meson clock controller")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
[jbrunet@baylibre.com: update the comment in above the fix]
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/meson/clk-pll.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index ddb1e56347395..3a5853ca98c6c 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -77,6 +77,15 @@ static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw,
 	unsigned int m, n, frac;
 
 	n = meson_parm_read(clk->map, &pll->n);
+
+	/*
+	 * On some HW, N is set to zero on init. This value is invalid as
+	 * it would result in a division by zero. The rate can't be
+	 * calculated in this case
+	 */
+	if (n == 0)
+		return 0;
+
 	m = meson_parm_read(clk->map, &pll->m);
 
 	frac = MESON_PARM_APPLICABLE(&pll->frac) ?
-- 
2.20.1

[PATCH AUTOSEL 5.5 047/542] clk: at91: sam9x60: fix programmable clock prescaler

[Sasha Levin]

From: Eugen Hristev <eugen.hristev@microchip.com>

[ Upstream commit 66d9f5214c9ba1c151478f99520b6817302d50dc ]

The prescaler works as parent rate divided by (PRES + 1) (is_pres_direct == 1)
It does not work in the way of parent rate shifted to the right by (PRES + 1),
which means division by 2^(PRES + 1) (is_pres_direct == 0)
Thus is_pres_direct must be enabled for this SoC, to make the right computation.
This field was added in
commit 45b06682113b ("clk: at91: fix programmable clock for sama5d2")
SAM9X60 has the same field as SAMA5D2 in the PCK

Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1575977088-16781-1-git-send-email-eugen.hristev@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/at91/sam9x60.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index 86238d5ecb4da..77398aefeb6db 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -47,6 +47,7 @@ static const struct clk_programmable_layout sam9x60_programmable_layout = {
 	.pres_shift = 8,
 	.css_mask = 0x1f,
 	.have_slck_mck = 0,
+	.is_pres_direct = 1,
 };
 
 static const struct clk_pcr_layout sam9x60_pcr_layout = {
-- 
2.20.1

[PATCH AUTOSEL 5.5 049/542] clk: meson: meson8b: make the CCF use the glitch-free mali mux

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 8daeaea99caabe24a0929fac17977ebfb882fa86 ]

The "mali_0" or "mali_1" clock trees should not be updated while the
clock is running. Enforce this by setting CLK_SET_RATE_GATE on the
"mali_0" and "mali_1" gates. This makes the CCF switch to the "mali_1"
tree when "mali_0" is currently active and vice versa, which is exactly
what the vendor driver does when updating the frequency of the mali
clock.

This fixes a potential hang when changing the GPU frequency at runtime.

Fixes: 74e1f2521f16ff ("clk: meson: meson8b: add the GPU clock tree")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/meson/meson8b.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 67e6691e080c1..8856ce476ccfa 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1764,8 +1764,11 @@ static struct clk_regmap meson8b_hdmi_sys = {
 
 /*
  * The MALI IP is clocked by two identical clocks (mali_0 and mali_1)
- * muxed by a glitch-free switch on Meson8b and Meson8m2. Meson8 only
- * has mali_0 and no glitch-free mux.
+ * muxed by a glitch-free switch on Meson8b and Meson8m2. The CCF can
+ * actually manage this glitch-free mux because it does top-to-bottom
+ * updates the each clock tree and switches to the "inactive" one when
+ * CLK_SET_RATE_GATE is set.
+ * Meson8 only has mali_0 and no glitch-free mux.
  */
 static const struct clk_hw *meson8b_mali_0_1_parent_hws[] = {
 	&meson8b_xtal.hw,
@@ -1830,7 +1833,7 @@ static struct clk_regmap meson8b_mali_0 = {
 			&meson8b_mali_0_div.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT,
+		.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -1885,7 +1888,7 @@ static struct clk_regmap meson8b_mali_1 = {
 			&meson8b_mali_1_div.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT,
+		.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT,
 	},
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.5 085/542] clk: ti: dra7: fix parent for gmac_clkctrl

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 69e300283796dae7e8c2e6acdabcd31336c0c93e ]

The parent clk for gmac clk ctrl has to be gmac_main_clk (125MHz) instead
of dpll_gmac_ck (1GHz). This is caused incorrect CPSW MDIO operation.
Hence, fix it.

Fixes: dffa9051d546 ('clk: ti: dra7: add new clkctrl data')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/ti/clk-7xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
index 5f46782cebeb2..b656ba2abcf7e 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -405,7 +405,7 @@ static const struct omap_clkctrl_bit_data dra7_gmac_bit_data[] __initconst = {
 };
 
 static const struct omap_clkctrl_reg_data dra7_gmac_clkctrl_regs[] __initconst = {
-	{ DRA7_GMAC_GMAC_CLKCTRL, dra7_gmac_bit_data, CLKF_SW_SUP, "dpll_gmac_ck" },
+	{ DRA7_GMAC_GMAC_CLKCTRL, dra7_gmac_bit_data, CLKF_SW_SUP, "gmac_main_clk" },
 	{ 0 },
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.5 129/542] clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()

[Sasha Levin]

From: Stephen Boyd <sboyd@kernel.org>

[ Upstream commit 21e157c62eeded8b1558a991b4820b761d48a730 ]

The DFS frequency table logic overwrites 'cfg' while detecting the
parent clk and then later on in clk_rcg2_dfs_populate_freq() we use that
same variable to figure out the mode of the clk, either MND or not. Add
a new variable to hold the parent clk bit so that 'cfg' is left
untouched for use later.

This fixes problems in detecting the supported frequencies for any clks
in DFS mode.

Fixes: cc4f6944d0e3 ("clk: qcom: Add support for RCG to register for DFS")
Reported-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200128193329.45635-1-sboyd@kernel.org
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/clk-rcg2.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index 8f4b9bec29565..5e0f7d8f168dd 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -952,7 +952,7 @@ static void clk_rcg2_dfs_populate_freq(struct clk_hw *hw, unsigned int l,
 	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
 	struct clk_hw *p;
 	unsigned long prate = 0;
-	u32 val, mask, cfg, mode;
+	u32 val, mask, cfg, mode, src;
 	int i, num_parents;
 
 	regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + SE_PERF_DFSR(l), &cfg);
@@ -962,12 +962,12 @@ static void clk_rcg2_dfs_populate_freq(struct clk_hw *hw, unsigned int l,
 	if (cfg & mask)
 		f->pre_div = cfg & mask;
 
-	cfg &= CFG_SRC_SEL_MASK;
-	cfg >>= CFG_SRC_SEL_SHIFT;
+	src = cfg & CFG_SRC_SEL_MASK;
+	src >>= CFG_SRC_SEL_SHIFT;
 
 	num_parents = clk_hw_get_num_parents(hw);
 	for (i = 0; i < num_parents; i++) {
-		if (cfg == rcg->parent_map[i].cfg) {
+		if (src == rcg->parent_map[i].cfg) {
 			f->src = rcg->parent_map[i].src;
 			p = clk_hw_get_parent_by_index(&rcg->clkr.hw, i);
 			prate = clk_hw_get_rate(p);
-- 
2.20.1

[PATCH AUTOSEL 5.5 130/542] clk: qcom: rcg2: Don't crash if our parent can't be found; return an error

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 908b050114d8fefdddc57ec9fbc213c3690e7f5f ]

When I got my clock parenting slightly wrong I ended up with a crash
that looked like this:

  Unable to handle kernel NULL pointer dereference at virtual
  address 0000000000000000
  ...
  pc : clk_hw_get_rate+0x14/0x44
  ...
  Call trace:
   clk_hw_get_rate+0x14/0x44
   _freq_tbl_determine_rate+0x94/0xfc
   clk_rcg2_determine_rate+0x2c/0x38
   clk_core_determine_round_nolock+0x4c/0x88
   clk_core_round_rate_nolock+0x6c/0xa8
   clk_core_round_rate_nolock+0x9c/0xa8
   clk_core_set_rate_nolock+0x70/0x180
   clk_set_rate+0x3c/0x6c
   of_clk_set_defaults+0x254/0x360
   platform_drv_probe+0x28/0xb0
   really_probe+0x120/0x2dc
   driver_probe_device+0x64/0xfc
   device_driver_attach+0x4c/0x6c
   __driver_attach+0xac/0xc0
   bus_for_each_dev+0x84/0xcc
   driver_attach+0x2c/0x38
   bus_add_driver+0xfc/0x1d0
   driver_register+0x64/0xf8
   __platform_driver_register+0x4c/0x58
   msm_drm_register+0x5c/0x60
   ...

It turned out that clk_hw_get_parent_by_index() was returning NULL and
we weren't checking.  Let's check it so that we don't crash.

Fixes: ac269395cdd8 ("clk: qcom: Convert to clk_hw based provider APIs")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lkml.kernel.org/r/20200203103049.v4.1.I7487325fe8e701a68a07d3be8a6a4b571eca9cfa@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/clk-rcg2.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index 5e0f7d8f168dd..cecdb07ce13ba 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -217,6 +217,9 @@ static int _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f,
 
 	clk_flags = clk_hw_get_flags(hw);
 	p = clk_hw_get_parent_by_index(hw, index);
+	if (!p)
+		return -EINVAL;
+
 	if (clk_flags & CLK_SET_RATE_PARENT) {
 		rate = f->freq;
 		if (f->pre_div) {
-- 
2.20.1

[PATCH AUTOSEL 5.5 196/542] clk: imx: Add correct failure handling for clk based helpers

[Sasha Levin]

From: Abel Vesa <abel.vesa@nxp.com>

[ Upstream commit f60f1c62c3188fcca945581e35e3440ee3fdcc95 ]

If the clk_hw based API returns an error, trying to return the clk from
hw will end up in a NULL pointer dereference. So adding the to_clk
checker and using it inside every clk based macro helper we handle that
case correctly.

This to_clk is also temporary and will go away along with the clk based
macro helpers once there is no user that need them anymore.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/imx/clk.h | 37 ++++++++++++++++++++++---------------
 1 file changed, 22 insertions(+), 15 deletions(-)

diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index bc5bb6ac86364..30ddbc1ced2ee 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -54,48 +54,48 @@ extern struct imx_pll14xx_clk imx_1416x_pll;
 extern struct imx_pll14xx_clk imx_1443x_pll;
 
 #define imx_clk_cpu(name, parent_name, div, mux, pll, step) \
-	imx_clk_hw_cpu(name, parent_name, div, mux, pll, step)->clk
+	to_clk(imx_clk_hw_cpu(name, parent_name, div, mux, pll, step))
 
 #define clk_register_gate2(dev, name, parent_name, flags, reg, bit_idx, \
 				cgr_val, clk_gate_flags, lock, share_count) \
-	clk_hw_register_gate2(dev, name, parent_name, flags, reg, bit_idx, \
-				cgr_val, clk_gate_flags, lock, share_count)->clk
+	to_clk(clk_hw_register_gate2(dev, name, parent_name, flags, reg, bit_idx, \
+				cgr_val, clk_gate_flags, lock, share_count))
 
 #define imx_clk_pllv3(type, name, parent_name, base, div_mask) \
-	imx_clk_hw_pllv3(type, name, parent_name, base, div_mask)->clk
+	to_clk(imx_clk_hw_pllv3(type, name, parent_name, base, div_mask))
 
 #define imx_clk_pfd(name, parent_name, reg, idx) \
-	imx_clk_hw_pfd(name, parent_name, reg, idx)->clk
+	to_clk(imx_clk_hw_pfd(name, parent_name, reg, idx))
 
 #define imx_clk_gate_exclusive(name, parent, reg, shift, exclusive_mask) \
-	imx_clk_hw_gate_exclusive(name, parent, reg, shift, exclusive_mask)->clk
+	to_clk(imx_clk_hw_gate_exclusive(name, parent, reg, shift, exclusive_mask))
 
 #define imx_clk_fixed_factor(name, parent, mult, div) \
-	imx_clk_hw_fixed_factor(name, parent, mult, div)->clk
+	to_clk(imx_clk_hw_fixed_factor(name, parent, mult, div))
 
 #define imx_clk_divider2(name, parent, reg, shift, width) \
-	imx_clk_hw_divider2(name, parent, reg, shift, width)->clk
+	to_clk(imx_clk_hw_divider2(name, parent, reg, shift, width))
 
 #define imx_clk_gate_dis(name, parent, reg, shift) \
-	imx_clk_hw_gate_dis(name, parent, reg, shift)->clk
+	to_clk(imx_clk_hw_gate_dis(name, parent, reg, shift))
 
 #define imx_clk_gate2(name, parent, reg, shift) \
-	imx_clk_hw_gate2(name, parent, reg, shift)->clk
+	to_clk(imx_clk_hw_gate2(name, parent, reg, shift))
 
 #define imx_clk_gate2_flags(name, parent, reg, shift, flags) \
-	imx_clk_hw_gate2_flags(name, parent, reg, shift, flags)->clk
+	to_clk(imx_clk_hw_gate2_flags(name, parent, reg, shift, flags))
 
 #define imx_clk_gate2_shared2(name, parent, reg, shift, share_count) \
-	imx_clk_hw_gate2_shared2(name, parent, reg, shift, share_count)->clk
+	to_clk(imx_clk_hw_gate2_shared2(name, parent, reg, shift, share_count))
 
 #define imx_clk_gate3(name, parent, reg, shift) \
-	imx_clk_hw_gate3(name, parent, reg, shift)->clk
+	to_clk(imx_clk_hw_gate3(name, parent, reg, shift))
 
 #define imx_clk_gate4(name, parent, reg, shift) \
-	imx_clk_hw_gate4(name, parent, reg, shift)->clk
+	to_clk(imx_clk_hw_gate4(name, parent, reg, shift))
 
 #define imx_clk_mux(name, reg, shift, width, parents, num_parents) \
-	imx_clk_hw_mux(name, reg, shift, width, parents, num_parents)->clk
+	to_clk(imx_clk_hw_mux(name, reg, shift, width, parents, num_parents))
 
 struct clk *imx_clk_pll14xx(const char *name, const char *parent_name,
 		 void __iomem *base, const struct imx_pll14xx_clk *pll_clk);
@@ -198,6 +198,13 @@ struct clk_hw *imx_clk_hw_fixup_mux(const char *name, void __iomem *reg,
 			      u8 shift, u8 width, const char * const *parents,
 			      int num_parents, void (*fixup)(u32 *val));
 
+static inline struct clk *to_clk(struct clk_hw *hw)
+{
+	if (IS_ERR_OR_NULL(hw))
+		return ERR_CAST(hw);
+	return hw->clk;
+}
+
 static inline struct clk *imx_clk_fixed(const char *name, int rate)
 {
 	return clk_register_fixed_rate(NULL, name, NULL, 0, rate);
-- 
2.20.1

[PATCH AUTOSEL 5.5 236/542] clk: qcom: smd: Add missing bimc clock

[Sasha Levin]

From: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>

[ Upstream commit 87ec9adcca71801a44ddb311185b17df09839ab5 ]

It turns out booting the modem is dependent on a bimc vote from Linux on
msm8998.  To make the modem happy, add the bimc clock to rely on the
default vote from rpmcc.  Once we have interconnect support, bimc should
be controlled properly.

Fixes: 6131dc81211c ("clk: qcom: smd: Add support for MSM8998 rpm clocks")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191217165409.4919-1-jeffrey.l.hugo@gmail.com
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/clk-smd-rpm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index 930fa4a4c52a8..e5c3db11bf26c 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -648,6 +648,7 @@ static const struct rpm_smd_clk_desc rpm_clk_qcs404 = {
 };
 
 /* msm8998 */
+DEFINE_CLK_SMD_RPM(msm8998, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
 DEFINE_CLK_SMD_RPM(msm8998, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
 DEFINE_CLK_SMD_RPM(msm8998, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
 DEFINE_CLK_SMD_RPM(msm8998, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2);
@@ -671,6 +672,8 @@ DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk2_pin, rf_clk2_a_pin, 5);
 DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk3, rf_clk3_a, 6);
 DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk3_pin, rf_clk3_a_pin, 6);
 static struct clk_smd_rpm *msm8998_clks[] = {
+	[RPM_SMD_BIMC_CLK] = &msm8998_bimc_clk,
+	[RPM_SMD_BIMC_A_CLK] = &msm8998_bimc_a_clk,
 	[RPM_SMD_PCNOC_CLK] = &msm8998_pcnoc_clk,
 	[RPM_SMD_PCNOC_A_CLK] = &msm8998_pcnoc_a_clk,
 	[RPM_SMD_SNOC_CLK] = &msm8998_snoc_clk,
-- 
2.20.1

[PATCH AUTOSEL 5.5 245/542] clk: renesas: rcar-gen3: Allow changing the RPC[D2] clocks

[Sasha Levin]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

[ Upstream commit 0d67c0340a60829c5c1b7d09629d23bbd67696f3 ]

I was unable to get clk_set_rate() setting a lower RPC-IF clock frequency
and that issue boiled down to me not passing CLK_SET_RATE_PARENT flag to
clk_register_composite() when registering the RPC[D2] clocks...

Fixes: db4a0073cc82 ("clk: renesas: rcar-gen3: Add RPC clocks")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Link: https://lore.kernel.org/r/be27a344-d8bf-9e0c-8950-2d1b48498496@cogentembedded.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/renesas/rcar-gen3-cpg.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
index c97b647db9b68..488f8b3980c55 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.c
+++ b/drivers/clk/renesas/rcar-gen3-cpg.c
@@ -470,7 +470,8 @@ static struct clk * __init cpg_rpc_clk_register(const char *name,
 
 	clk = clk_register_composite(NULL, name, &parent_name, 1, NULL, NULL,
 				     &rpc->div.hw,  &clk_divider_ops,
-				     &rpc->gate.hw, &clk_gate_ops, 0);
+				     &rpc->gate.hw, &clk_gate_ops,
+				     CLK_SET_RATE_PARENT);
 	if (IS_ERR(clk)) {
 		kfree(rpc);
 		return clk;
@@ -506,7 +507,8 @@ static struct clk * __init cpg_rpcd2_clk_register(const char *name,
 
 	clk = clk_register_composite(NULL, name, &parent_name, 1, NULL, NULL,
 				     &rpcd2->fixed.hw, &clk_fixed_factor_ops,
-				     &rpcd2->gate.hw, &clk_gate_ops, 0);
+				     &rpcd2->gate.hw, &clk_gate_ops,
+				     CLK_SET_RATE_PARENT);
 	if (IS_ERR(clk))
 		kfree(rpcd2);
 
-- 
2.20.1

[PATCH AUTOSEL 5.5 257/542] clk: qcom: Add missing msm8998 gcc_bimc_gfx_clk

[Sasha Levin]

From: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>

[ Upstream commit db2c7c0a04b11753f5741d00b784b5380ddeee72 ]

gcc_bimc_gfx_clk is a required clock for booting the GPU and GPU SMMU.

Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support)
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191217164913.4783-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/gcc-msm8998.c               | 14 ++++++++++++++
 include/dt-bindings/clock/qcom,gcc-msm8998.h |  1 +
 2 files changed, 15 insertions(+)

diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
index cf31b5d03270f..df1d7056436cd 100644
--- a/drivers/clk/qcom/gcc-msm8998.c
+++ b/drivers/clk/qcom/gcc-msm8998.c
@@ -1996,6 +1996,19 @@ static struct clk_branch gcc_gp3_clk = {
 	},
 };
 
+static struct clk_branch gcc_bimc_gfx_clk = {
+	.halt_reg = 0x46040,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x46040,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_bimc_gfx_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct clk_branch gcc_gpu_bimc_gfx_clk = {
 	.halt_reg = 0x71010,
 	.halt_check = BRANCH_HALT,
@@ -2810,6 +2823,7 @@ static struct clk_regmap *gcc_msm8998_clocks[] = {
 	[GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
 	[GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
 	[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
+	[GCC_BIMC_GFX_CLK] = &gcc_bimc_gfx_clk.clkr,
 	[GCC_GPU_BIMC_GFX_CLK] = &gcc_gpu_bimc_gfx_clk.clkr,
 	[GCC_GPU_BIMC_GFX_SRC_CLK] = &gcc_gpu_bimc_gfx_src_clk.clkr,
 	[GCC_GPU_CFG_AHB_CLK] = &gcc_gpu_cfg_ahb_clk.clkr,
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8998.h b/include/dt-bindings/clock/qcom,gcc-msm8998.h
index de1d8a1f59665..63e02dc32a0bb 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8998.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8998.h
@@ -182,6 +182,7 @@
 #define GCC_MSS_GPLL0_DIV_CLK_SRC				173
 #define GCC_MSS_SNOC_AXI_CLK					174
 #define GCC_MSS_MNOC_BIMC_AXI_CLK				175
+#define GCC_BIMC_GFX_CLK					176
 
 #define PCIE_0_GDSC						0
 #define UFS_GDSC						1
-- 
2.20.1

[PATCH AUTOSEL 5.5 258/542] clk: actually call the clock init before any other callback of the clock

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit f6fa75ca912be6021335de63a32aa4d295f3c524 ]

 __clk_init_parent() will call the .get_parent() callback of the clock
 so .init() must run before.

Fixes: 541debae0adf ("clk: call the clock init() callback before any other ops callback")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190924123954.31561-2-jbrunet@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 772258de2d1f3..53585cfc4b9ba 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3338,6 +3338,21 @@ static int __clk_core_init(struct clk_core *core)
 		goto out;
 	}
 
+	/*
+	 * optional platform-specific magic
+	 *
+	 * The .init callback is not used by any of the basic clock types, but
+	 * exists for weird hardware that must perform initialization magic.
+	 * Please consider other ways of solving initialization problems before
+	 * using this callback, as its use is discouraged.
+	 *
+	 * If it exist, this callback should called before any other callback of
+	 * the clock
+	 */
+	if (core->ops->init)
+		core->ops->init(core->hw);
+
+
 	core->parent = __clk_init_parent(core);
 
 	/*
@@ -3362,17 +3377,6 @@ static int __clk_core_init(struct clk_core *core)
 		core->orphan = true;
 	}
 
-	/*
-	 * optional platform-specific magic
-	 *
-	 * The .init callback is not used by any of the basic clock types, but
-	 * exists for weird hardware that must perform initialization magic.
-	 * Please consider other ways of solving initialization problems before
-	 * using this callback, as its use is discouraged.
-	 */
-	if (core->ops->init)
-		core->ops->init(core->hw);
-
 	/*
 	 * Set clk's accuracy.  The preferred method is to use
 	 * .recalc_accuracy. For simple clocks and lazy developers the default
-- 
2.20.1

[PATCH AUTOSEL 5.5 260/542] clk: bm1800: Remove set but not used variable 'fref'

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 59ef4da4e4084d323dd4c3aa4b2fc64ce9e25625 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/clk/clk-bm1880.c: In function 'bm1880_pll_rate_calc':
drivers/clk/clk-bm1880.c:477:13: warning:
 variable 'fref' set but not used [-Wunused-but-set-variable]

It is never used, so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lkml.kernel.org/r/20191129033534.188257-1-yuehaibing@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk-bm1880.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/clk/clk-bm1880.c b/drivers/clk/clk-bm1880.c
index 4cd175afce9b1..e6d6599d310a1 100644
--- a/drivers/clk/clk-bm1880.c
+++ b/drivers/clk/clk-bm1880.c
@@ -474,11 +474,10 @@ static struct bm1880_composite_clock bm1880_composite_clks[] = {
 static unsigned long bm1880_pll_rate_calc(u32 regval, unsigned long parent_rate)
 {
 	u64 numerator;
-	u32 fbdiv, fref, refdiv;
+	u32 fbdiv, refdiv;
 	u32 postdiv1, postdiv2, denominator;
 
 	fbdiv = (regval >> 16) & 0xfff;
-	fref = parent_rate;
 	refdiv = regval & 0x1f;
 	postdiv1 = (regval >> 8) & 0x7;
 	postdiv2 = (regval >> 12) & 0x7;
-- 
2.20.1

[PATCH AUTOSEL 5.5 279/542] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock

[Sasha Levin]

From: Icenowy Zheng <icenowy@aosc.io>

[ Upstream commit ec97faff743b398e21f74a54c81333f3390093aa ]

The A64 PLL_CPU clock has the same instability if some factor changed
without the PLL gated like other SoCs with sun6i-style CCU, e.g. A33,
H3.

Add the mux and pll notifiers for A64 CPU clock to workaround the
problem.

Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 28 ++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 49bd7a4c015c4..5f66bf8797723 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -921,11 +921,26 @@ static const struct sunxi_ccu_desc sun50i_a64_ccu_desc = {
 	.num_resets	= ARRAY_SIZE(sun50i_a64_ccu_resets),
 };
 
+static struct ccu_pll_nb sun50i_a64_pll_cpu_nb = {
+	.common	= &pll_cpux_clk.common,
+	/* copy from pll_cpux_clk */
+	.enable	= BIT(31),
+	.lock	= BIT(28),
+};
+
+static struct ccu_mux_nb sun50i_a64_cpu_nb = {
+	.common		= &cpux_clk.common,
+	.cm		= &cpux_clk.mux,
+	.delay_us	= 1, /* > 8 clock cycles at 24 MHz */
+	.bypass_index	= 1, /* index of 24 MHz oscillator */
+};
+
 static int sun50i_a64_ccu_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	void __iomem *reg;
 	u32 val;
+	int ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	reg = devm_ioremap_resource(&pdev->dev, res);
@@ -939,7 +954,18 @@ static int sun50i_a64_ccu_probe(struct platform_device *pdev)
 
 	writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG);
 
-	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
+	ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
+	if (ret)
+		return ret;
+
+	/* Gate then ungate PLL CPU after any rate changes */
+	ccu_pll_notifier_register(&sun50i_a64_pll_cpu_nb);
+
+	/* Reparent CPU during PLL CPU rate changes */
+	ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
+				  &sun50i_a64_cpu_nb);
+
+	return 0;
 }
 
 static const struct of_device_id sun50i_a64_ccu_ids[] = {
-- 
2.20.1

[PATCH AUTOSEL 5.5 281/542] clk: Use parent node pointer during registration if necessary

[Sasha Levin]

From: Stephen Boyd <sboyd@kernel.org>

[ Upstream commit 9011f92622e5ef2d075f45e5fa818776d4feb8c0 ]

Sometimes clk drivers are attached to devices which are children of a
parent device that is connected to a node in DT. This happens when
devices are MFD-ish and the parent device driver mostly registers child
devices to match against drivers placed in their respective subsystem
directories like drivers/clk, drivers/regulator, etc. When the clk
driver calls clk_register() with a device pointer, that struct device
pointer won't have a device_node associated with it because it was
created purely in software as a way to partition logic to a subsystem.

This causes problems for the way we find parent clks for the clks
registered by these child devices because we look at the registering
device's device_node pointer to lookup 'clocks' and 'clock-names'
properties. Let's use the parent device's device_node pointer if the
registering device doesn't have a device_node but the parent does. This
simplifies clk registration code by avoiding the need to assign some
device_node to the device registering the clk.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20191230190455.141339-1-sboyd@kernel.org
[sboyd@kernel.org: Fixup kernel-doc notation]
Reviewed-by: Niklas Cassel <nks@flawful.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk.c | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 53585cfc4b9ba..66f056ac4c156 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3736,6 +3736,28 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
 	return ERR_PTR(ret);
 }
 
+/**
+ * dev_or_parent_of_node() - Get device node of @dev or @dev's parent
+ * @dev: Device to get device node of
+ *
+ * Return: device node pointer of @dev, or the device node pointer of
+ * @dev->parent if dev doesn't have a device node, or NULL if neither
+ * @dev or @dev->parent have a device node.
+ */
+static struct device_node *dev_or_parent_of_node(struct device *dev)
+{
+	struct device_node *np;
+
+	if (!dev)
+		return NULL;
+
+	np = dev_of_node(dev);
+	if (!np)
+		np = dev_of_node(dev->parent);
+
+	return np;
+}
+
 /**
  * clk_register - allocate a new clock, register it and return an opaque cookie
  * @dev: device that is registering this clock
@@ -3751,7 +3773,7 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
  */
 struct clk *clk_register(struct device *dev, struct clk_hw *hw)
 {
-	return __clk_register(dev, dev_of_node(dev), hw);
+	return __clk_register(dev, dev_or_parent_of_node(dev), hw);
 }
 EXPORT_SYMBOL_GPL(clk_register);
 
@@ -3767,7 +3789,8 @@ EXPORT_SYMBOL_GPL(clk_register);
  */
 int clk_hw_register(struct device *dev, struct clk_hw *hw)
 {
-	return PTR_ERR_OR_ZERO(__clk_register(dev, dev_of_node(dev), hw));
+	return PTR_ERR_OR_ZERO(__clk_register(dev, dev_or_parent_of_node(dev),
+			       hw));
 }
 EXPORT_SYMBOL_GPL(clk_hw_register);
 
-- 
2.20.1

[PATCH AUTOSEL 5.5 282/542] clk: uniphier: Add SCSSI clock gate for each channel

[Sasha Levin]

From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

[ Upstream commit 1ec09a2ec67a0baa46a3ccac041dbcdbc6db2cb9 ]

SCSSI has clock gates for each channel in the SoCs newer than Pro4,
so this adds missing clock gates for channel 1, 2 and 3. And more, this
moves MCSSI clock ID after SCSSI.

Fixes: ff388ee36516 ("clk: uniphier: add clock frequency support for SPI")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lkml.kernel.org/r/1577410925-22021-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/uniphier/clk-uniphier-peri.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/uniphier/clk-uniphier-peri.c b/drivers/clk/uniphier/clk-uniphier-peri.c
index 9caa52944b1c5..3e32db9dad815 100644
--- a/drivers/clk/uniphier/clk-uniphier-peri.c
+++ b/drivers/clk/uniphier/clk-uniphier-peri.c
@@ -18,8 +18,8 @@
 #define UNIPHIER_PERI_CLK_FI2C(idx, ch)					\
 	UNIPHIER_CLK_GATE("i2c" #ch, (idx), "i2c", 0x24, 24 + (ch))
 
-#define UNIPHIER_PERI_CLK_SCSSI(idx)					\
-	UNIPHIER_CLK_GATE("scssi", (idx), "spi", 0x20, 17)
+#define UNIPHIER_PERI_CLK_SCSSI(idx, ch)				\
+	UNIPHIER_CLK_GATE("scssi" #ch, (idx), "spi", 0x20, 17 + (ch))
 
 #define UNIPHIER_PERI_CLK_MCSSI(idx)					\
 	UNIPHIER_CLK_GATE("mcssi", (idx), "spi", 0x24, 14)
@@ -35,7 +35,7 @@ const struct uniphier_clk_data uniphier_ld4_peri_clk_data[] = {
 	UNIPHIER_PERI_CLK_I2C(6, 2),
 	UNIPHIER_PERI_CLK_I2C(7, 3),
 	UNIPHIER_PERI_CLK_I2C(8, 4),
-	UNIPHIER_PERI_CLK_SCSSI(11),
+	UNIPHIER_PERI_CLK_SCSSI(11, 0),
 	{ /* sentinel */ }
 };
 
@@ -51,7 +51,10 @@ const struct uniphier_clk_data uniphier_pro4_peri_clk_data[] = {
 	UNIPHIER_PERI_CLK_FI2C(8, 4),
 	UNIPHIER_PERI_CLK_FI2C(9, 5),
 	UNIPHIER_PERI_CLK_FI2C(10, 6),
-	UNIPHIER_PERI_CLK_SCSSI(11),
-	UNIPHIER_PERI_CLK_MCSSI(12),
+	UNIPHIER_PERI_CLK_SCSSI(11, 0),
+	UNIPHIER_PERI_CLK_SCSSI(12, 1),
+	UNIPHIER_PERI_CLK_SCSSI(13, 2),
+	UNIPHIER_PERI_CLK_SCSSI(14, 3),
+	UNIPHIER_PERI_CLK_MCSSI(15),
 	{ /* sentinel */ }
 };
-- 
2.20.1