From: Thierry Reding <thierry.reding@gmail.com>
To: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: jonathanh@nvidia.com, broonie@kernel.org, lgirdwood@gmail.com,
perex@perex.cz, tiwai@suse.com, digetx@gmail.com,
mperttunen@nvidia.com, gregkh@linuxfoundation.org,
sboyd@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
pdeschrijver@nvidia.com, pgaikwad@nvidia.com, spujar@nvidia.com,
josephl@nvidia.com, daniel.lezcano@linaro.org,
mmaddireddy@nvidia.com, markz@nvidia.com,
devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v8 00/22] Move PMC clocks into Tegra PMC driver
Date: Mon, 17 Feb 2020 10:59:40 +0100 [thread overview]
Message-ID: <20200217095940.GE1345979@ulmo> (raw)
In-Reply-To: <1578986667-16041-1-git-send-email-skomatineni@nvidia.com>
[-- Attachment #1: Type: text/plain, Size: 12561 bytes --]
On Mon, Jan 13, 2020 at 11:24:05PM -0800, Sowjanya Komatineni wrote:
> This patch series moves Tegra PMC clocks from clock driver to pmc driver
> along with the device trees changes and audio driver which uses one of
> the pmc clock for audio mclk.
>
> Tegra PMC has clk_out_1, clk_out_2, clk_out_3 and blink controls which
> are currently registered by Tegra clock driver using clk_regiser_mux and
> clk_register_gate which performs direct Tegra PMC register access.
>
> When Tegra PMC is in secure mode, any access from non-secure world will
> not go through.
>
> This patch series adds these Tegra PMC clocks and blink controls to Tegra
> PMC driver with PMC as clock provider and removes them from Tegra clock
> driver.
>
> PMC clock clk_out_1 is dedicated for audio mclk from Tegra30 thru Tegra210
> and clock driver does inital parent configuration for it and enables them.
> But this clock should be taken care by audio driver as there is no need
> to have this clock pre enabled.
>
> So, this series also includes patch that updates ASoC utils to take
> care of parent configuration for mclk if device tree don't specify
> initial parent configuration using assigned-clock-parents and enable
> audio mclk during utils init.
>
> DTs are also updated to use clk_out_1 as audio mclk rather than extern1.
>
> This series also includes a patch for mclk fallback to extern1 when
> retrieving mclk fails to have this backward compatible of new DT with
> old kernels.
>
> [v8]: Changes between v7 and v8 are
> - v7 minor feedback
>
> - Audio mclk is needed only for audio, but there is some unknown
> dependency of audio mclk and suspend-resume on Tegra30 where when
> mclk is disable, suspend-resume doesn't work.
> So v8 undoes v7 change of mclk enable and disable during machine
> startup and shutdown and keeps audio mclk enabled in ASoC driver
> tegra_asoc_utils_init.
>
> - change in the patches order.
>
> Note:
> - Patches 1 thru 5 are to change CLK_M_DIV clocks to OSC_DIV clocks.
> OSC_DIV clocks uses same ID as CLK_M_DIV clocks during the
> transition to replace CLK_M_DIV with OSC_DIV.
> - Patches 8 and 10 registers pmc clocks as pmc_clk_out_1/2/3, and
> pmc_blink to avoid using same clock names as pmc clocks from
> tegra_car provider to have them functionally work with all the
> transition patches.
> - Patch 11 adds audio mclk fallback to extern1 to have new DT work
> with old kernels. This patch need to be back-ported.
> - Patch 18 adds audio mclk parent configuration when DT doesn't
> specify parent configs. This patch retrieves pmc_clk_out_1 as audio
> mclk so added this patch after all DT updates to use pmc clocks
> from tegra_pmc.
> - Patch 19 does audio mclk enable during utils init to have it
> enabled all the time.
> - Patch 20 and 21 removes PMC clocks from clock driver and their IDs
> at the end of PMC clocks transition to tegra_pmc.
>
>
> [v7]: Changes between v6 and v7 are
> - v6 minor feedback
> - Added DT id for Tegra OSC to use in device tree for pmc clock
> parent.
>
> [v6]: Changes between v5 and v6 are
> - v5 feedback
> - Added ASoC machine startup and shutdown callbacks to control audio
> mclk enable/disable and removed default mclk enable from clock driver.
> - Updated tegra_asoc_utils_set_rate to disable mclk only during PLLA
> rate change and removed disabling PLLA as its already taken care by
> pll clock driver.
> - Removed tegra_asoc_utils_set_rate call from utils_init as set_rate
> is set during machine hw_params and during utils_init mclk is
> already in disabled state and this causes warning during mclk disable
> in utils_set_rate.
>
> [v5]: Changes between v4 and v5 are
> - v4 feedback
> - updated dt-binding pmc YAML schema with more description on power
> gate nodes and pad configuration state nodes.
> - update tegra_asoc_utils_set_rate to disable audio mclk only if
> its in enable state.
>
> [v4]: Changes between v3 and v4 are
> - v3 Feedback
> - Updated clocks clk_m_div2 and clk_m_div4 as osc_div2 and osc_div4.
> Tegra don't have clk_m_div2, clk_m_div4 and they should actually
> be osc_div2 and osc_div4 clocks from osc pads.
> - Fixed PMC clock parents to use osc, osc_div2, osc_div4.
> This is not a functional bug fix but correction to use proper parent
> name.
> - Register each PMC clock as single clock rather than separate
> mux and gate clocks.
> - Update ASoC utils to use resource managed APIs rather than
> using clk_get and clk_put.
> - Updated device tree and ASoC driver to use clk_out_1 instead of
> clk_out_1_mux as PMC clocks are registered as single clock.
> - Update clock driver init_table to not enable audio related clocks
> as ASoC utils will do audio clock enables.
>
> [v3]: Changes between v2 and v3 are
> - Removes set parent of clk_out_1_mux to extern1 and enabling
> extern1 from the clock driver.
> - Doesn't enable clk_out_1 and blink by default in pmc driver
> - Updates ASoC driver to take care of audio mclk parent
> configuration incase if device tree don't specify assigned
> clock parent properties and enables mclk using both clk_out_1
> and extern1.
> - updates all device trees using extern1 as mclk in sound node
> to use clk_out_1 from pmc.
> - patch for YAML format pmc dt-binding
> - Includes v2 feedback
>
> [v2]: Changes between v1 and v2 are
> - v2 includes patches for adding clk_out_1, clk_out_2, clk_out_3,
> blink controls to Tegra PMC driver and removing clk-tegra-pmc.
> - feedback related to pmc clocks in Tegra PMC driver from v1
> - Removed patches for WB0 PLLM overrides and PLLE IDDQ PMC programming
> by the clock driver using helper functions from Tegra PMC.
>
> Note:
> To use helper functions from PMC driver, PMC early init need to
> happen prior to using helper functions and these helper functions are
> for PLLM Override and PLLE IDDQ programming in PMC during PLLM/PLLE
> clock registration which happen in clock_init prior to Tegra PMC
> probe.
> Moving PLLM/PLLE clocks registration to happen after Tegra PMC
> impacts other clocks EMC, MC and corresponding tegra_emc_init and
> tegra_mc_init.
> This implementation of configuring PMC registers thru helper
> functions in clock driver needs proper changes across PMC, Clock,
> EMC and MC inits to have it work across all Tegra platforms.
>
> Currently PLLM Override is not enabled in the bootloader so proper
> patches for this fix will be taken care separately.
>
> [v1]: v1 includes patches for below fixes.
> - adding clk_out_1, clk_out_2, clk_out_3, blink controls to Tegra PMC
> driver and removing clk-tegra-pmc.
> - updated clock provider from tegra_car to pmc in the device tree
> tegra210-smaug.dts that uses clk_out_2.
> - Added helper functions in PMC driver for WB0 PLLM overrides and PLLE
> IDDQ programming to use by clock driver and updated clock driver to
> use these helper functions and removed direct PMC access from clock
> driver and all pmc base address references in clock driver.
>
> Sowjanya Komatineni (22):
> dt-bindings: clock: tegra: Add IDs for OSC clocks
> clk: tegra: Add support for OSC_DIV fixed clocks
> clk: tegra: Add Tegra OSC to clock lookup
> clk: tegra: Fix Tegra PMC clock out parents
> clk: tegra: Remove CLK_M_DIV fixed clocks
> dt-bindings: tegra: Convert Tegra PMC bindings to YAML
> dt-bindings: soc: tegra-pmc: Add Tegra PMC clock bindings
> soc: tegra: Add Tegra PMC clocks registration into PMC driver
> dt-bindings: soc: tegra-pmc: Add id for Tegra PMC 32KHz blink clock
> soc: tegra: Add support for 32KHz blink clock
> ASoC: tegra: Add fallback implementation for audio mclk
> ASoC: tegra: Use device managed resource APIs to get the clock
> ARM: dts: tegra: Add clock-cells property to pmc
> arm64: tegra: Add clock-cells property to Tegra PMC node
> ARM: tegra: Update sound node clocks in device tree
> arm64: tegra: smaug: Change clk_out_2 provider to pmc
> ASoC: nau8825: change Tegra clk_out_2 provider to tegra_pmc
> ASoC: tegra: Add audio mclk parent configuration
> ASoC: tegra: Enable audio mclk during tegra_asoc_utils_init
> clk: tegra: Remove tegra_pmc_clk_init along with clk ids
> dt-bindings: clock: tegra: Remove pmc clock ids from clock dt-bindings
> clk: tegra: Remove audio clocks configuration from clock driver
>
> .../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 300 -----------------
> .../bindings/arm/tegra/nvidia,tegra20-pmc.yaml | 354 +++++++++++++++++++++
> .../devicetree/bindings/sound/nau8825.txt | 2 +-
> arch/arm/boot/dts/tegra114-dalmore.dts | 8 +-
> arch/arm/boot/dts/tegra114.dtsi | 4 +-
> arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 8 +-
> arch/arm/boot/dts/tegra124-apalis.dtsi | 8 +-
> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 8 +-
> arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +-
> arch/arm/boot/dts/tegra124-venice2.dts | 8 +-
> arch/arm/boot/dts/tegra124.dtsi | 4 +-
> arch/arm/boot/dts/tegra20.dtsi | 4 +-
> arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 8 +-
> arch/arm/boot/dts/tegra30-apalis.dtsi | 8 +-
> arch/arm/boot/dts/tegra30-beaver.dts | 8 +-
> arch/arm/boot/dts/tegra30-cardhu.dtsi | 8 +-
> arch/arm/boot/dts/tegra30-colibri.dtsi | 8 +-
> arch/arm/boot/dts/tegra30.dtsi | 4 +-
> arch/arm64/boot/dts/nvidia/tegra132.dtsi | 4 +-
> arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 2 +-
> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 6 +-
> drivers/clk/tegra/Makefile | 1 -
> drivers/clk/tegra/clk-id.h | 12 +-
> drivers/clk/tegra/clk-tegra-fixed.c | 37 ++-
> drivers/clk/tegra/clk-tegra-pmc.c | 122 -------
> drivers/clk/tegra/clk-tegra114.c | 43 +--
> drivers/clk/tegra/clk-tegra124.c | 48 ++-
> drivers/clk/tegra/clk-tegra20.c | 9 +-
> drivers/clk/tegra/clk-tegra210.c | 32 +-
> drivers/clk/tegra/clk-tegra30.c | 33 +-
> drivers/clk/tegra/clk.h | 1 -
> drivers/soc/tegra/pmc.c | 354 +++++++++++++++++++++
> include/dt-bindings/clock/tegra114-car.h | 18 +-
> include/dt-bindings/clock/tegra124-car-common.h | 18 +-
> include/dt-bindings/clock/tegra20-car.h | 2 +-
> include/dt-bindings/clock/tegra210-car.h | 18 +-
> include/dt-bindings/clock/tegra30-car.h | 18 +-
> include/dt-bindings/soc/tegra-pmc.h | 16 +
> sound/soc/tegra/tegra_alc5632.c | 7 +-
> sound/soc/tegra/tegra_asoc_utils.c | 126 ++++----
> sound/soc/tegra/tegra_asoc_utils.h | 1 -
> sound/soc/tegra/tegra_max98090.c | 22 +-
> sound/soc/tegra/tegra_rt5640.c | 22 +-
> sound/soc/tegra/tegra_rt5677.c | 7 +-
> sound/soc/tegra/tegra_sgtl5000.c | 7 +-
> sound/soc/tegra/tegra_wm8753.c | 22 +-
> sound/soc/tegra/tegra_wm8903.c | 22 +-
> sound/soc/tegra/tegra_wm9712.c | 8 +-
> sound/soc/tegra/trimslice.c | 18 +-
> 49 files changed, 1041 insertions(+), 775 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
> create mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
> delete mode 100644 drivers/clk/tegra/clk-tegra-pmc.c
> create mode 100644 include/dt-bindings/soc/tegra-pmc.h
I've applied patches 1-10 and 13-16 to the Tegra tree, but I think it
should be fine for Mark to pick up the ASoC patches into his tree,
right?
As I mentioned in my reply to patch 20, I think we need to hold off on
applying patches 20-22 until all the rest have been merged, otherwise
we'll regress.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2020-02-17 9:59 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-14 7:24 [PATCH v8 00/22] Move PMC clocks into Tegra PMC driver Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 01/22] dt-bindings: clock: tegra: Add IDs for OSC clocks Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 02/22] clk: tegra: Add support for OSC_DIV fixed clocks Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 03/22] clk: tegra: Add Tegra OSC to clock lookup Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 04/22] clk: tegra: Fix Tegra PMC clock out parents Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 05/22] clk: tegra: Remove CLK_M_DIV fixed clocks Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 06/22] dt-bindings: tegra: Convert Tegra PMC bindings to YAML Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 07/22] dt-bindings: soc: tegra-pmc: Add Tegra PMC clock bindings Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 08/22] soc: tegra: Add Tegra PMC clocks registration into PMC driver Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 09/22] dt-bindings: soc: tegra-pmc: Add id for Tegra PMC 32KHz blink clock Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 10/22] soc: tegra: Add support for " Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 11/22] ASoC: tegra: Add fallback implementation for audio mclk Sowjanya Komatineni
2020-01-19 15:08 ` Dmitry Osipenko
2020-01-23 23:56 ` Dmitry Osipenko
2020-02-17 9:29 ` Thierry Reding
2020-02-17 9:40 ` Thierry Reding
2020-02-17 14:51 ` Dmitry Osipenko
2020-01-14 7:24 ` [PATCH v8 12/22] ASoC: tegra: Use device managed resource APIs to get the clock Sowjanya Komatineni
2020-02-17 9:48 ` Thierry Reding
2020-01-14 7:24 ` [PATCH v8 13/22] ARM: dts: tegra: Add clock-cells property to pmc Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 14/22] arm64: tegra: Add clock-cells property to Tegra PMC node Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 15/22] ARM: tegra: Update sound node clocks in device tree Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 16/22] arm64: tegra: smaug: Change clk_out_2 provider to pmc Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 17/22] ASoC: nau8825: change Tegra clk_out_2 provider to tegra_pmc Sowjanya Komatineni
2020-02-17 9:52 ` Thierry Reding
2020-01-14 7:24 ` [PATCH v8 18/22] ASoC: tegra: Add audio mclk parent configuration Sowjanya Komatineni
2020-02-17 9:53 ` Thierry Reding
2020-01-14 7:24 ` [PATCH v8 19/22] ASoC: tegra: Enable audio mclk during tegra_asoc_utils_init Sowjanya Komatineni
2020-01-19 15:14 ` Dmitry Osipenko
2020-01-20 4:10 ` Sameer Pujar
2020-01-20 15:32 ` Dmitry Osipenko
2020-02-17 9:53 ` Thierry Reding
2020-01-14 7:24 ` [PATCH v8 20/22] clk: tegra: Remove tegra_pmc_clk_init along with clk ids Sowjanya Komatineni
2020-02-17 9:55 ` Thierry Reding
2020-01-14 7:24 ` [PATCH v8 21/22] dt-bindings: clock: tegra: Remove pmc clock ids from clock dt-bindings Sowjanya Komatineni
2020-01-14 7:24 ` [PATCH v8 22/22] clk: tegra: Remove audio clocks configuration from clock driver Sowjanya Komatineni
2020-01-19 15:04 ` Dmitry Osipenko
2020-01-21 16:19 ` Sowjanya Komatineni
2020-01-21 16:57 ` Dmitry Osipenko
2020-01-24 4:34 ` Dmitry Osipenko
2020-01-24 8:50 ` Ben Dooks
2020-02-17 9:59 ` Thierry Reding [this message]
2020-03-04 19:26 ` [PATCH v8 00/22] Move PMC clocks into Tegra PMC driver Dmitry Osipenko
2020-03-04 21:22 ` Dmitry Osipenko
2020-03-25 21:27 ` Thierry Reding
2020-03-27 15:45 ` Mark Brown
2020-04-21 13:52 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200217095940.GE1345979@ulmo \
--to=thierry.reding@gmail.com \
--cc=broonie@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=digetx@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=josephl@nvidia.com \
--cc=lgirdwood@gmail.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=markz@nvidia.com \
--cc=mmaddireddy@nvidia.com \
--cc=mperttunen@nvidia.com \
--cc=pdeschrijver@nvidia.com \
--cc=perex@perex.cz \
--cc=pgaikwad@nvidia.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=skomatineni@nvidia.com \
--cc=spujar@nvidia.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).