From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-amlogic@lists.infradead.org, khilman@baylibre.com,
jbrunet@baylibre.com, narmstrong@baylibre.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [RFC v1 3/5] arm64: dts: amlogic: meson-gx: add the Mali-450 OPP table and use DVFS
Date: Tue, 31 Mar 2020 00:11:02 +0200 [thread overview]
Message-ID: <20200330221104.3163788-4-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20200330221104.3163788-1-martin.blumenstingl@googlemail.com>
Add the OPP table for the Mali-450 GPU and drop the hardcoded initial
clock configuration. This enables GPU DVFS and thus saves power when the
GPU is not in use while still being able switch to a higher clock on
demand.
While here, make most of meson-gxl-mali re-usable to reduce the amount
of duplicate code between GXBB and GXL. This is more important now as we
don't want to duplicate the GPU OPP table.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
.../boot/dts/amlogic/meson-gx-mali450.dtsi | 61 +++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 51 ++++------------
.../boot/dts/amlogic/meson-gxl-mali.dtsi | 46 +++-----------
3 files changed, 81 insertions(+), 77 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi
new file mode 100644
index 000000000000..f9771b51c852
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/ {
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-125000000 {
+ opp-hz = /bits/ 64 <125000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-250000000 {
+ opp-hz = /bits/ 64 <250000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-285714285 {
+ opp-hz = /bits/ 64 <285714285>;
+ opp-microvolt = <950000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-666666666 {
+ opp-hz = /bits/ 64 <666666666>;
+ opp-microvolt = <950000>;
+ };
+ opp-744000000 {
+ opp-hz = /bits/ 64 <744000000>;
+ opp-microvolt = <950000>;
+ };
+ };
+};
+
+&apb {
+ mali: gpu@c0000 {
+ compatible = "arm,mali-450";
+ reg = <0x0 0xc0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1",
+ "pp2", "ppmmu2";
+ operating-points-v2 = <&gpu_opp_table>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 0cb40326b0d3..e43b330129c7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -4,6 +4,7 @@
*/
#include "meson-gx.dtsi"
+#include "meson-gx-mali450.dtsi"
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
#include <dt-bindings/clock/gxbb-clkc.h>
@@ -241,46 +242,6 @@ mux {
};
};
-&apb {
- mali: gpu@c0000 {
- compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
- reg = <0x0 0xc0000 0x0 0x40000>;
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gp", "gpmmu", "pp", "pmu",
- "pp0", "ppmmu0", "pp1", "ppmmu1",
- "pp2", "ppmmu2";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
- clock-names = "bus", "core";
-
- /*
- * Mali clocking is provided by two identical clock paths
- * MALI_0 and MALI_1 muxed to a single clock by a glitch
- * free mux to safely change frequency while running.
- */
- assigned-clocks = <&clkc CLKID_GP0_PLL>,
- <&clkc CLKID_MALI_0_SEL>,
- <&clkc CLKID_MALI_0>,
- <&clkc CLKID_MALI>; /* Glitch free mux */
- assigned-clock-parents = <0>, /* Do Nothing */
- <&clkc CLKID_GP0_PLL>,
- <0>, /* Do Nothing */
- <&clkc CLKID_MALI_0>;
- assigned-clock-rates = <744000000>,
- <0>, /* Do Nothing */
- <744000000>,
- <0>; /* Do Nothing */
- };
-};
-
&cbus {
spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc";
@@ -362,6 +323,16 @@ &i2c_C {
clocks = <&clkc CLKID_I2C>;
};
+&mali {
+ compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+
+ assigned-clocks = <&clkc CLKID_GP0_PLL>;
+ assigned-clock-rates = <744000000>;
+};
+
&periphs {
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxbb-periphs-pinctrl";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
index 6aaafff674f9..478e755cc87c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
@@ -4,42 +4,14 @@
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/
-&apb {
- mali: gpu@c0000 {
- compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
- reg = <0x0 0xc0000 0x0 0x40000>;
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gp", "gpmmu", "pp", "pmu",
- "pp0", "ppmmu0", "pp1", "ppmmu1",
- "pp2", "ppmmu2";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
- clock-names = "bus", "core";
+#include "meson-gx-mali450.dtsi"
- /*
- * Mali clocking is provided by two identical clock paths
- * MALI_0 and MALI_1 muxed to a single clock by a glitch
- * free mux to safely change frequency while running.
- */
- assigned-clocks = <&clkc CLKID_GP0_PLL>,
- <&clkc CLKID_MALI_0_SEL>,
- <&clkc CLKID_MALI_0>,
- <&clkc CLKID_MALI>; /* Glitch free mux */
- assigned-clock-parents = <0>, /* Do Nothing */
- <&clkc CLKID_GP0_PLL>,
- <0>, /* Do Nothing */
- <&clkc CLKID_MALI_0>;
- assigned-clock-rates = <744000000>,
- <0>, /* Do Nothing */
- <744000000>,
- <0>; /* Do Nothing */
- };
+&mali {
+ compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
+
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+
+ assigned-clocks = <&clkc CLKID_GP0_PLL>;
+ assigned-clock-rates = <744000000>;
};
--
2.26.0
next prev parent reply other threads:[~2020-03-30 22:11 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-30 22:10 [RFC v1 0/5] GPU DVFS for Meson GXBB/GXL/GXM/G12A/G12B/SM1 Martin Blumenstingl
2020-03-30 22:11 ` [RFC v1 1/5] clk: meson: gxbb: Prepare the GPU clock tree to change at runtime Martin Blumenstingl
2020-03-30 22:11 ` [RFC v1 2/5] clk: meson: g12a: " Martin Blumenstingl
2020-03-30 22:11 ` Martin Blumenstingl [this message]
2020-03-31 7:44 ` [RFC v1 3/5] arm64: dts: amlogic: meson-gx: add the Mali-450 OPP table and use DVFS Neil Armstrong
2020-03-31 13:31 ` Martin Blumenstingl
2020-03-30 22:11 ` [RFC v1 4/5] arm64: dts: amlogic: meson-gxm: add the Mali " Martin Blumenstingl
2020-03-30 22:11 ` [RFC v1 5/5] arm64: dts: amlogic: meson-g12: " Martin Blumenstingl
2020-04-14 13:05 ` [RFC v1 0/5] GPU DVFS for Meson GXBB/GXL/GXM/G12A/G12B/SM1 Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200330221104.3163788-4-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).