[PATCH 0/9] Convert i.MX legacy platforms clock binding to json-schema

[PATCH 0/9] Convert i.MX legacy platforms clock binding to json-schema

[Anson Huang]

The patch series converts i.MX legacy platforms clock binding to
json-schema, including i.MX1, i.MX21, i.MX23, i.MX25, i.MX27, i.MX28,
i.MX31, i.MX35 and i.MX5.

On i.MX21, the CCM has no interrupt at all, so remove the interrupts
property from original binding doc.

Anson Huang (9):
  dt-bindings: clock: Convert i.MX5 clock to json-schema
  dt-bindings: clock: Convert i.MX35 clock to json-schema
  dt-bindings: clock: Convert i.MX31 clock to json-schema
  dt-bindings: clock: Convert i.MX28 clock to json-schema
  dt-bindings: clock: Convert i.MX23 clock to json-schema
  dt-bindings: clock: Convert i.MX27 clock to json-schema
  dt-bindings: clock: Convert i.MX25 clock to json-schema
  dt-bindings: clock: Convert i.MX21 clock to json-schema
  dt-bindings: clock: Convert i.MX1 clock to json-schema

 .../devicetree/bindings/clock/imx1-clock.txt       |  26 ---
 .../devicetree/bindings/clock/imx1-clock.yaml      |  49 ++++++
 .../devicetree/bindings/clock/imx21-clock.txt      |  27 ---
 .../devicetree/bindings/clock/imx21-clock.yaml     |  49 ++++++
 .../devicetree/bindings/clock/imx23-clock.txt      |  70 --------
 .../devicetree/bindings/clock/imx23-clock.yaml     |  90 ++++++++++
 .../devicetree/bindings/clock/imx25-clock.txt      | 160 ------------------
 .../devicetree/bindings/clock/imx25-clock.yaml     | 184 +++++++++++++++++++++
 .../devicetree/bindings/clock/imx27-clock.txt      |  27 ---
 .../devicetree/bindings/clock/imx27-clock.yaml     |  53 ++++++
 .../devicetree/bindings/clock/imx28-clock.txt      |  93 -----------
 .../devicetree/bindings/clock/imx28-clock.yaml     | 113 +++++++++++++
 .../devicetree/bindings/clock/imx31-clock.txt      |  90 ----------
 .../devicetree/bindings/clock/imx31-clock.yaml     | 118 +++++++++++++
 .../devicetree/bindings/clock/imx35-clock.txt      | 114 -------------
 .../devicetree/bindings/clock/imx35-clock.yaml     | 137 +++++++++++++++
 .../devicetree/bindings/clock/imx5-clock.txt       |  28 ----
 .../devicetree/bindings/clock/imx5-clock.yaml      |  63 +++++++
 18 files changed, 856 insertions(+), 635 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/imx1-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx1-clock.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/imx21-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx21-clock.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/imx23-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx23-clock.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/imx25-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx25-clock.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/imx27-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx27-clock.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/imx28-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx28-clock.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/imx31-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx31-clock.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/imx5-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx5-clock.yaml

-- 
2.7.4

[PATCH 1/9] dt-bindings: clock: Convert i.MX5 clock to json-schema

[Anson Huang]

Convert the i.MX5 clock binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 .../devicetree/bindings/clock/imx5-clock.txt       | 28 ----------
 .../devicetree/bindings/clock/imx5-clock.yaml      | 63 ++++++++++++++++++++++
 2 files changed, 63 insertions(+), 28 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/imx5-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx5-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
deleted file mode 100644
index a24ca9e..0000000
--- a/Documentation/devicetree/bindings/clock/imx5-clock.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Clock bindings for Freescale i.MX5
-
-Required properties:
-- compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
-for the full list of i.MX5 clock IDs.
-
-Examples (for mx53):
-
-clks: ccm@53fd4000{
-	compatible = "fsl,imx53-ccm";
-	reg = <0x53fd4000 0x4000>;
-	interrupts = <0 71 0x04 0 72 0x04>;
-	#clock-cells = <1>;
-};
-
-can1: can@53fc8000 {
-	compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
-	reg = <0x53fc8000 0x4000>;
-	interrupts = <82>;
-	clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
-	clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
new file mode 100644
index 0000000..e4c405c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx5-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX5
+
+maintainers:
+  - Fabio Estevam <fabio.estevam@freescale.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
+  for the full list of i.MX5 clock IDs.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx53-ccm
+      - fsl,imx51-ccm
+      - fsl,imx50-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@53fd4000{
+        compatible = "fsl,imx53-ccm";
+        reg = <0x53fd4000 0x4000>;
+        interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 72 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+    };
+
+    can@53fc8000 {
+        compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+        reg = <0x53fc8000 0x4000>;
+        interrupts = <82>;
+        clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+        clock-names = "ipg", "per";
+    };
-- 
2.7.4

[PATCH 2/9] dt-bindings: clock: Convert i.MX35 clock to json-schema

[Anson Huang]

Convert the i.MX35 clock binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 .../devicetree/bindings/clock/imx35-clock.txt      | 114 -----------------
 .../devicetree/bindings/clock/imx35-clock.yaml     | 137 +++++++++++++++++++++
 2 files changed, 137 insertions(+), 114 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt b/Documentation/devicetree/bindings/clock/imx35-clock.txt
deleted file mode 100644
index f497832..0000000
--- a/Documentation/devicetree/bindings/clock/imx35-clock.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-* Clock bindings for Freescale i.MX35
-
-Required properties:
-- compatible: Should be "fsl,imx35-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX35
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	ckih			0
-	mpll			1
-	ppll			2
-	mpll_075		3
-	arm			4
-	hsp			5
-	hsp_div			6
-	hsp_sel			7
-	ahb			8
-	ipg			9
-	arm_per_div		10
-	ahb_per_div		11
-	ipg_per			12
-	uart_sel		13
-	uart_div		14
-	esdhc_sel		15
-	esdhc1_div		16
-	esdhc2_div		17
-	esdhc3_div		18
-	spdif_sel		19
-	spdif_div_pre		20
-	spdif_div_post		21
-	ssi_sel			22
-	ssi1_div_pre		23
-	ssi1_div_post		24
-	ssi2_div_pre		25
-	ssi2_div_post		26
-	usb_sel			27
-	usb_div			28
-	nfc_div			29
-	asrc_gate		30
-	pata_gate		31
-	audmux_gate		32
-	can1_gate		33
-	can2_gate		34
-	cspi1_gate		35
-	cspi2_gate		36
-	ect_gate		37
-	edio_gate		38
-	emi_gate		39
-	epit1_gate		40
-	epit2_gate		41
-	esai_gate		42
-	esdhc1_gate		43
-	esdhc2_gate		44
-	esdhc3_gate		45
-	fec_gate		46
-	gpio1_gate		47
-	gpio2_gate		48
-	gpio3_gate		49
-	gpt_gate		50
-	i2c1_gate		51
-	i2c2_gate		52
-	i2c3_gate		53
-	iomuxc_gate		54
-	ipu_gate		55
-	kpp_gate		56
-	mlb_gate		57
-	mshc_gate		58
-	owire_gate		59
-	pwm_gate		60
-	rngc_gate		61
-	rtc_gate		62
-	rtic_gate		63
-	scc_gate		64
-	sdma_gate		65
-	spba_gate		66
-	spdif_gate		67
-	ssi1_gate		68
-	ssi2_gate		69
-	uart1_gate		70
-	uart2_gate		71
-	uart3_gate		72
-	usbotg_gate		73
-	wdog_gate		74
-	max_gate		75
-	admux_gate		76
-	csi_gate		77
-	csi_div			78
-	csi_sel			79
-	iim_gate		80
-	gpu2d_gate		81
-	ckli_gate		82
-
-Examples:
-
-clks: ccm@53f80000 {
-	compatible = "fsl,imx35-ccm";
-	reg = <0x53f80000 0x4000>;
-	interrupts = <31>;
-	#clock-cells = <1>;
-};
-
-esdhc1: esdhc@53fb4000 {
-	compatible = "fsl,imx35-esdhc";
-	reg = <0x53fb4000 0x4000>;
-	interrupts = <7>;
-	clocks = <&clks 9>, <&clks 8>, <&clks 43>;
-	clock-names = "ipg", "ahb", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
new file mode 100644
index 0000000..fecea84
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx35-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX35
+
+maintainers:
+  - Steffen Trumtrar <s.trumtrar@pengutronix.de>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX35
+  clocks and IDs.
+
+        Clock			ID
+        ---------------------------
+        ckih			0
+        mpll			1
+        ppll			2
+        mpll_075		3
+        arm			4
+        hsp			5
+        hsp_div			6
+        hsp_sel			7
+        ahb			8
+        ipg			9
+        arm_per_div		10
+        ahb_per_div		11
+        ipg_per			12
+        uart_sel		13
+        uart_div		14
+        esdhc_sel		15
+        esdhc1_div		16
+        esdhc2_div		17
+        esdhc3_div		18
+        spdif_sel		19
+        spdif_div_pre		20
+        spdif_div_post		21
+        ssi_sel			22
+        ssi1_div_pre		23
+        ssi1_div_post		24
+        ssi2_div_pre		25
+        ssi2_div_post		26
+        usb_sel			27
+        usb_div			28
+        nfc_div			29
+        asrc_gate		30
+        pata_gate		31
+        audmux_gate		32
+        can1_gate		33
+        can2_gate		34
+        cspi1_gate		35
+        cspi2_gate		36
+        ect_gate		37
+        edio_gate		38
+        emi_gate		39
+        epit1_gate		40
+        epit2_gate		41
+        esai_gate		42
+        esdhc1_gate		43
+        esdhc2_gate		44
+        esdhc3_gate		45
+        fec_gate		46
+        gpio1_gate		47
+        gpio2_gate		48
+        gpio3_gate		49
+        gpt_gate		50
+        i2c1_gate		51
+        i2c2_gate		52
+        i2c3_gate		53
+        iomuxc_gate		54
+        ipu_gate		55
+        kpp_gate		56
+        mlb_gate		57
+        mshc_gate		58
+        owire_gate		59
+        pwm_gate		60
+        rngc_gate		61
+        rtc_gate		62
+        rtic_gate		63
+        scc_gate		64
+        sdma_gate		65
+        spba_gate		66
+        spdif_gate		67
+        ssi1_gate		68
+        ssi2_gate		69
+        uart1_gate		70
+        uart2_gate		71
+        uart3_gate		72
+        usbotg_gate		73
+        wdog_gate		74
+        max_gate		75
+        admux_gate		76
+        csi_gate		77
+        csi_div			78
+        csi_sel			79
+        iim_gate		80
+        gpu2d_gate		81
+        ckli_gate		82
+
+properties:
+  compatible:
+    const: fsl,imx35-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx35-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
+
+    esdhc@53fb4000 {
+        compatible = "fsl,imx35-esdhc";
+        reg = <0x53fb4000 0x4000>;
+        interrupts = <7>;
+        clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+        clock-names = "ipg", "ahb", "per";
+    };
-- 
2.7.4

[PATCH 3/9] dt-bindings: clock: Convert i.MX31 clock to json-schema

[Anson Huang]

Convert the i.MX31 clock binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 .../devicetree/bindings/clock/imx31-clock.txt      |  90 ----------------
 .../devicetree/bindings/clock/imx31-clock.yaml     | 118 +++++++++++++++++++++
 2 files changed, 118 insertions(+), 90 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/imx31-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx31-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt
deleted file mode 100644
index 0a29109..0000000
--- a/Documentation/devicetree/bindings/clock/imx31-clock.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-* Clock bindings for Freescale i.MX31
-
-Required properties:
-- compatible: Should be "fsl,imx31-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX31
-clocks and IDs.
-
-	Clock		    ID
-	-----------------------
-	dummy	             0
-	ckih                 1
-	ckil                 2
-	mpll                 3
-	spll                 4
-	upll                 5
-	mcu_main             6
-	hsp                  7
-	ahb                  8
-	nfc                  9
-	ipg                  10
-	per_div              11
-	per                  12
-	csi_sel              13
-	fir_sel              14
-	csi_div              15
-	usb_div_pre          16
-	usb_div_post         17
-	fir_div_pre          18
-	fir_div_post         19
-	sdhc1_gate           20
-	sdhc2_gate           21
-	gpt_gate             22
-	epit1_gate           23
-	epit2_gate           24
-	iim_gate             25
-	ata_gate             26
-	sdma_gate            27
-	cspi3_gate           28
-	rng_gate             29
-	uart1_gate           30
-	uart2_gate           31
-	ssi1_gate            32
-	i2c1_gate            33
-	i2c2_gate            34
-	i2c3_gate            35
-	hantro_gate          36
-	mstick1_gate         37
-	mstick2_gate         38
-	csi_gate             39
-	rtc_gate             40
-	wdog_gate            41
-	pwm_gate             42
-	sim_gate             43
-	ect_gate             44
-	usb_gate             45
-	kpp_gate             46
-	ipu_gate             47
-	uart3_gate           48
-	uart4_gate           49
-	uart5_gate           50
-	owire_gate           51
-	ssi2_gate            52
-	cspi1_gate           53
-	cspi2_gate           54
-	gacc_gate            55
-	emi_gate             56
-	rtic_gate            57
-	firi_gate            58
-
-Examples:
-
-clks: ccm@53f80000{
-	compatible = "fsl,imx31-ccm";
-	reg = <0x53f80000 0x4000>;
-	interrupts = <31>, <53>;
-	#clock-cells = <1>;
-};
-
-uart1: serial@43f90000 {
-	compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-	reg = <0x43f90000 0x4000>;
-	interrupts = <45>;
-	clocks = <&clks 10>, <&clks 30>;
-	clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
new file mode 100644
index 0000000..2d9220e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx31-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX31
+
+maintainers:
+  - Fabio Estevam <fabio.estevam@freescale.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX31
+  clocks and IDs.
+
+        Clock		    ID
+        -----------------------
+        dummy	             0
+        ckih                 1
+        ckil                 2
+        mpll                 3
+        spll                 4
+        upll                 5
+        mcu_main             6
+        hsp                  7
+        ahb                  8
+        nfc                  9
+        ipg                  10
+        per_div              11
+        per                  12
+        csi_sel              13
+        fir_sel              14
+        csi_div              15
+        usb_div_pre          16
+        usb_div_post         17
+        fir_div_pre          18
+        fir_div_post         19
+        sdhc1_gate           20
+        sdhc2_gate           21
+        gpt_gate             22
+        epit1_gate           23
+        epit2_gate           24
+        iim_gate             25
+        ata_gate             26
+        sdma_gate            27
+        cspi3_gate           28
+        rng_gate             29
+        uart1_gate           30
+        uart2_gate           31
+        ssi1_gate            32
+        i2c1_gate            33
+        i2c2_gate            34
+        i2c3_gate            35
+        hantro_gate          36
+        mstick1_gate         37
+        mstick2_gate         38
+        csi_gate             39
+        rtc_gate             40
+        wdog_gate            41
+        pwm_gate             42
+        sim_gate             43
+        ect_gate             44
+        usb_gate             45
+        kpp_gate             46
+        ipu_gate             47
+        uart3_gate           48
+        uart4_gate           49
+        uart5_gate           50
+        owire_gate           51
+        ssi2_gate            52
+        cspi1_gate           53
+        cspi2_gate           54
+        gacc_gate            55
+        emi_gate             56
+        rtic_gate            57
+        firi_gate            58
+
+properties:
+  compatible:
+    const: fsl,imx31-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for DVFS when a frequency change is requested, request 2 is
+      to generate interrupt for DPTC when a voltage change is requested.
+    items:
+      - description: CCM DVFS interrupt request 1
+      - description: CCM DPTC interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx31-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>, <53>;
+        #clock-cells = <1>;
+    };
+
+    serial@43f90000 {
+        compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+        reg = <0x43f90000 0x4000>;
+        interrupts = <45>;
+        clocks = <&clks 10>, <&clks 30>;
+        clock-names = "ipg", "per";
+    };
-- 
2.7.4

[PATCH 4/9] dt-bindings: clock: Convert i.MX28 clock to json-schema

[Anson Huang]

Convert the i.MX28 clock binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 .../devicetree/bindings/clock/imx28-clock.txt      |  93 -----------------
 .../devicetree/bindings/clock/imx28-clock.yaml     | 113 +++++++++++++++++++++
 2 files changed, 113 insertions(+), 93 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/imx28-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx28-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt
deleted file mode 100644
index d84a37d..0000000
--- a/Documentation/devicetree/bindings/clock/imx28-clock.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-* Clock bindings for Freescale i.MX28
-
-Required properties:
-- compatible: Should be "fsl,imx28-clkctrl"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX28
-clocks and IDs.
-
-	Clock		ID
-	------------------
-	ref_xtal	0
-	pll0		1
-	pll1		2
-	pll2		3
-	ref_cpu		4
-	ref_emi		5
-	ref_io0		6
-	ref_io1		7
-	ref_pix		8
-	ref_hsadc	9
-	ref_gpmi	10
-	saif0_sel	11
-	saif1_sel	12
-	gpmi_sel	13
-	ssp0_sel	14
-	ssp1_sel	15
-	ssp2_sel	16
-	ssp3_sel	17
-	emi_sel		18
-	etm_sel		19
-	lcdif_sel	20
-	cpu		21
-	ptp_sel		22
-	cpu_pll		23
-	cpu_xtal	24
-	hbus		25
-	xbus		26
-	ssp0_div	27
-	ssp1_div	28
-	ssp2_div	29
-	ssp3_div	30
-	gpmi_div	31
-	emi_pll		32
-	emi_xtal	33
-	lcdif_div	34
-	etm_div		35
-	ptp		36
-	saif0_div	37
-	saif1_div	38
-	clk32k_div	39
-	rtc		40
-	lradc		41
-	spdif_div	42
-	clk32k		43
-	pwm		44
-	uart		45
-	ssp0		46
-	ssp1		47
-	ssp2		48
-	ssp3		49
-	gpmi		50
-	spdif		51
-	emi		52
-	saif0		53
-	saif1		54
-	lcdif		55
-	etm		56
-	fec		57
-	can0		58
-	can1		59
-	usb0		60
-	usb1		61
-	usb0_phy	62
-	usb1_phy	63
-	enet_out	64
-
-Examples:
-
-clks: clkctrl@80040000 {
-	compatible = "fsl,imx28-clkctrl";
-	reg = <0x80040000 0x2000>;
-	#clock-cells = <1>;
-};
-
-auart0: serial@8006a000 {
-	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-	reg = <0x8006a000 0x2000>;
-	interrupts = <112 70 71>;
-	clocks = <&clks 45>;
-};
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
new file mode 100644
index 0000000..e4a7038
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx28-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX28
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX28
+  clocks and IDs.
+
+        Clock		ID
+        ------------------
+        ref_xtal	0
+        pll0		1
+        pll1		2
+        pll2		3
+        ref_cpu		4
+        ref_emi		5
+        ref_io0		6
+        ref_io1		7
+        ref_pix		8
+        ref_hsadc	9
+        ref_gpmi	10
+        saif0_sel	11
+        saif1_sel	12
+        gpmi_sel	13
+        ssp0_sel	14
+        ssp1_sel	15
+        ssp2_sel	16
+        ssp3_sel	17
+        emi_sel		18
+        etm_sel		19
+        lcdif_sel	20
+        cpu		21
+        ptp_sel		22
+        cpu_pll		23
+        cpu_xtal	24
+        hbus		25
+        xbus		26
+        ssp0_div	27
+        ssp1_div	28
+        ssp2_div	29
+        ssp3_div	30
+        gpmi_div	31
+        emi_pll		32
+        emi_xtal	33
+        lcdif_div	34
+        etm_div		35
+        ptp		36
+        saif0_div	37
+        saif1_div	38
+        clk32k_div	39
+        rtc		40
+        lradc		41
+        spdif_div	42
+        clk32k		43
+        pwm		44
+        uart		45
+        ssp0		46
+        ssp1		47
+        ssp2		48
+        ssp3		49
+        gpmi		50
+        spdif		51
+        emi		52
+        saif0		53
+        saif1		54
+        lcdif		55
+        etm		56
+        fec		57
+        can0		58
+        can1		59
+        usb0		60
+        usb1		61
+        usb0_phy	62
+        usb1_phy	63
+        enet_out	64
+
+properties:
+  compatible:
+    const: fsl,imx28-clkctrl
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+examples:
+  - |
+    clock-controller@80040000 {
+        compatible = "fsl,imx28-clkctrl";
+        reg = <0x80040000 0x2000>;
+        #clock-cells = <1>;
+    };
+
+    serial@8006a000 {
+        compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+        reg = <0x8006a000 0x2000>;
+        interrupts = <112 70 71>;
+        clocks = <&clks 45>;
+    };
-- 
2.7.4

[PATCH 5/9] dt-bindings: clock: Convert i.MX23 clock to json-schema

[Anson Huang]

Convert the i.MX23 clock binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 .../devicetree/bindings/clock/imx23-clock.txt      | 70 -----------------
 .../devicetree/bindings/clock/imx23-clock.yaml     | 90 ++++++++++++++++++++++
 2 files changed, 90 insertions(+), 70 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/imx23-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx23-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt
deleted file mode 100644
index 8385348..0000000
--- a/Documentation/devicetree/bindings/clock/imx23-clock.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Clock bindings for Freescale i.MX23
-
-Required properties:
-- compatible: Should be "fsl,imx23-clkctrl"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX23
-clocks and IDs.
-
-	Clock		ID
-	------------------
-	ref_xtal	0
-	pll		1
-	ref_cpu		2
-	ref_emi		3
-	ref_pix		4
-	ref_io		5
-	saif_sel	6
-	lcdif_sel	7
-	gpmi_sel	8
-	ssp_sel		9
-	emi_sel		10
-	cpu		11
-	etm_sel		12
-	cpu_pll		13
-	cpu_xtal	14
-	hbus		15
-	xbus		16
-	lcdif_div	17
-	ssp_div		18
-	gpmi_div	19
-	emi_pll		20
-	emi_xtal	21
-	etm_div		22
-	saif_div	23
-	clk32k_div	24
-	rtc		25
-	adc		26
-	spdif_div	27
-	clk32k		28
-	dri		29
-	pwm		30
-	filt		31
-	uart		32
-	ssp		33
-	gpmi		34
-	spdif		35
-	emi		36
-	saif		37
-	lcdif		38
-	etm		39
-	usb		40
-	usb_phy		41
-
-Examples:
-
-clks: clkctrl@80040000 {
-	compatible = "fsl,imx23-clkctrl";
-	reg = <0x80040000 0x2000>;
-	#clock-cells = <1>;
-};
-
-auart0: serial@8006c000 {
-	compatible = "fsl,imx23-auart";
-	reg = <0x8006c000 0x2000>;
-	interrupts = <24 25 23>;
-	clocks = <&clks 32>;
-};
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
new file mode 100644
index 0000000..0fd21f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx23-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX23
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX23
+  clocks and IDs.
+
+        Clock		ID
+        ------------------
+        ref_xtal	0
+        pll		1
+        ref_cpu		2
+        ref_emi		3
+        ref_pix		4
+        ref_io		5
+        saif_sel	6
+        lcdif_sel	7
+        gpmi_sel	8
+        ssp_sel		9
+        emi_sel		10
+        cpu		11
+        etm_sel		12
+        cpu_pll		13
+        cpu_xtal	14
+        hbus		15
+        xbus		16
+        lcdif_div	17
+        ssp_div		18
+        gpmi_div	19
+        emi_pll		20
+        emi_xtal	21
+        etm_div		22
+        saif_div	23
+        clk32k_div	24
+        rtc		25
+        adc		26
+        spdif_div	27
+        clk32k		28
+        dri		29
+        pwm		30
+        filt		31
+        uart		32
+        ssp		33
+        gpmi		34
+        spdif		35
+        emi		36
+        saif		37
+        lcdif		38
+        etm		39
+        usb		40
+        usb_phy		41
+
+properties:
+  compatible:
+    const: fsl,imx23-clkctrl
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+examples:
+  - |
+    clock-controller@80040000 {
+        compatible = "fsl,imx23-clkctrl";
+        reg = <0x80040000 0x2000>;
+        #clock-cells = <1>;
+    };
+
+    serial@8006c000 {
+        compatible = "fsl,imx23-auart";
+        reg = <0x8006c000 0x2000>;
+        interrupts = <24 25 23>;
+        clocks = <&clks 32>;
+    };
-- 
2.7.4

[PATCH 6/9] dt-bindings: clock: Convert i.MX27 clock to json-schema

[Anson Huang]

Convert the i.MX27 clock binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 .../devicetree/bindings/clock/imx27-clock.txt      | 27 -----------
 .../devicetree/bindings/clock/imx27-clock.yaml     | 53 ++++++++++++++++++++++
 2 files changed, 53 insertions(+), 27 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/imx27-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx27-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt
deleted file mode 100644
index 4c95c04..0000000
--- a/Documentation/devicetree/bindings/clock/imx27-clock.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Clock bindings for Freescale i.MX27
-
-Required properties:
-- compatible: Should be "fsl,imx27-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
-for the full list of i.MX27 clock IDs.
-
-Examples:
-	clks: ccm@10027000{
-		compatible = "fsl,imx27-ccm";
-		reg = <0x10027000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	uart1: serial@1000a000 {
-		compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-		reg = <0x1000a000 0x1000>;
-		interrupts = <20>;
-		clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
-			 <&clks IMX27_CLK_PER1_GATE>;
-		clock-names = "ipg", "per";
-	};
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
new file mode 100644
index 0000000..2d69807
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx27-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX27
+
+maintainers:
+  - Fabio Estevam <fabio.estevam@freescale.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+  for the full list of i.MX27 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx27-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx27-clock.h>
+
+    clock-controller@10027000 {
+        compatible = "fsl,imx27-ccm";
+        reg = <0x10027000 0x1000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
+
+    serial@1000a000 {
+        compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+        reg = <0x1000a000 0x1000>;
+        interrupts = <20>;
+        clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+                 <&clks IMX27_CLK_PER1_GATE>;
+        clock-names = "ipg", "per";
+    };
-- 
2.7.4

[PATCH 7/9] dt-bindings: clock: Convert i.MX25 clock to json-schema

[Anson Huang]

Convert the i.MX25 clock binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 .../devicetree/bindings/clock/imx25-clock.txt      | 160 ------------------
 .../devicetree/bindings/clock/imx25-clock.yaml     | 184 +++++++++++++++++++++
 2 files changed, 184 insertions(+), 160 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/imx25-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx25-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt
deleted file mode 100644
index f8135ea..0000000
--- a/Documentation/devicetree/bindings/clock/imx25-clock.txt
+++ /dev/null
@@ -1,160 +0,0 @@
-* Clock bindings for Freescale i.MX25
-
-Required properties:
-- compatible: Should be "fsl,imx25-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX25
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	dummy			0
-	osc			1
-	mpll			2
-	upll			3
-	mpll_cpu_3_4		4
-	cpu_sel			5
-	cpu			6
-	ahb			7
-	usb_div			8
-	ipg			9
-	per0_sel		10
-	per1_sel		11
-	per2_sel		12
-	per3_sel		13
-	per4_sel		14
-	per5_sel		15
-	per6_sel		16
-	per7_sel		17
-	per8_sel		18
-	per9_sel		19
-	per10_sel		20
-	per11_sel		21
-	per12_sel		22
-	per13_sel		23
-	per14_sel		24
-	per15_sel		25
-	per0			26
-	per1			27
-	per2			28
-	per3			29
-	per4			30
-	per5			31
-	per6			32
-	per7			33
-	per8			34
-	per9			35
-	per10			36
-	per11			37
-	per12			38
-	per13			39
-	per14			40
-	per15			41
-	csi_ipg_per		42
-	epit_ipg_per		43
-	esai_ipg_per		44
-	esdhc1_ipg_per		45
-	esdhc2_ipg_per		46
-	gpt_ipg_per		47
-	i2c_ipg_per		48
-	lcdc_ipg_per		49
-	nfc_ipg_per		50
-	owire_ipg_per		51
-	pwm_ipg_per		52
-	sim1_ipg_per		53
-	sim2_ipg_per		54
-	ssi1_ipg_per		55
-	ssi2_ipg_per		56
-	uart_ipg_per		57
-	ata_ahb			58
-	reserved		59
-	csi_ahb			60
-	emi_ahb			61
-	esai_ahb		62
-	esdhc1_ahb		63
-	esdhc2_ahb		64
-	fec_ahb			65
-	lcdc_ahb		66
-	rtic_ahb		67
-	sdma_ahb		68
-	slcdc_ahb		69
-	usbotg_ahb		70
-	reserved		71
-	reserved		72
-	reserved		73
-	reserved		74
-	can1_ipg		75
-	can2_ipg		76
-	csi_ipg			77
-	cspi1_ipg		78
-	cspi2_ipg		79
-	cspi3_ipg		80
-	dryice_ipg		81
-	ect_ipg			82
-	epit1_ipg		83
-	epit2_ipg		84
-	reserved		85
-	esdhc1_ipg		86
-	esdhc2_ipg		87
-	fec_ipg			88
-	reserved		89
-	reserved		90
-	reserved		91
-	gpt1_ipg		92
-	gpt2_ipg		93
-	gpt3_ipg		94
-	gpt4_ipg		95
-	reserved		96
-	reserved		97
-	reserved		98
-	iim_ipg			99
-	reserved		100
-	reserved		101
-	kpp_ipg			102
-	lcdc_ipg		103
-	reserved		104
-	pwm1_ipg		105
-	pwm2_ipg		106
-	pwm3_ipg		107
-	pwm4_ipg		108
-	rngb_ipg		109
-	reserved		110
-	scc_ipg			111
-	sdma_ipg		112
-	sim1_ipg		113
-	sim2_ipg		114
-	slcdc_ipg		115
-	spba_ipg		116
-	ssi1_ipg		117
-	ssi2_ipg		118
-	tsc_ipg			119
-	uart1_ipg		120
-	uart2_ipg		121
-	uart3_ipg		122
-	uart4_ipg		123
-	uart5_ipg		124
-	reserved		125
-	wdt_ipg			126
-	cko_div			127
-	cko_sel			128
-	cko			129
-
-Examples:
-
-clks: ccm@53f80000 {
-	compatible = "fsl,imx25-ccm";
-	reg = <0x53f80000 0x4000>;
-	interrupts = <31>;
-};
-
-uart1: serial@43f90000 {
-	compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-	reg = <0x43f90000 0x4000>;
-	interrupts = <45>;
-	clocks = <&clks 79>, <&clks 50>;
-	clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
new file mode 100644
index 0000000..d25c537
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx25-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX25
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX25
+  clocks and IDs.
+
+        Clock			ID
+        --------------------------
+        dummy			0
+        osc			1
+        mpll			2
+        upll			3
+        mpll_cpu_3_4		4
+        cpu_sel			5
+        cpu			6
+        ahb			7
+        usb_div			8
+        ipg			9
+        per0_sel		10
+        per1_sel		11
+        per2_sel		12
+        per3_sel		13
+        per4_sel		14
+        per5_sel		15
+        per6_sel		16
+        per7_sel		17
+        per8_sel		18
+        per9_sel		19
+        per10_sel		20
+        per11_sel		21
+        per12_sel		22
+        per13_sel		23
+        per14_sel		24
+        per15_sel		25
+        per0			26
+        per1			27
+        per2			28
+        per3			29
+        per4			30
+        per5			31
+        per6			32
+        per7			33
+        per8			34
+        per9			35
+        per10			36
+        per11			37
+        per12			38
+        per13			39
+        per14			40
+        per15			41
+        csi_ipg_per		42
+        epit_ipg_per		43
+        esai_ipg_per		44
+        esdhc1_ipg_per		45
+        esdhc2_ipg_per		46
+        gpt_ipg_per		47
+        i2c_ipg_per		48
+        lcdc_ipg_per		49
+        nfc_ipg_per		50
+        owire_ipg_per		51
+        pwm_ipg_per		52
+        sim1_ipg_per		53
+        sim2_ipg_per		54
+        ssi1_ipg_per		55
+        ssi2_ipg_per		56
+        uart_ipg_per		57
+        ata_ahb			58
+        reserved		59
+        csi_ahb			60
+        emi_ahb			61
+        esai_ahb		62
+        esdhc1_ahb		63
+        esdhc2_ahb		64
+        fec_ahb			65
+        lcdc_ahb		66
+        rtic_ahb		67
+        sdma_ahb		68
+        slcdc_ahb		69
+        usbotg_ahb		70
+        reserved		71
+        reserved		72
+        reserved		73
+        reserved		74
+        can1_ipg		75
+        can2_ipg		76
+        csi_ipg			77
+        cspi1_ipg		78
+        cspi2_ipg		79
+        cspi3_ipg		80
+        dryice_ipg		81
+        ect_ipg			82
+        epit1_ipg		83
+        epit2_ipg		84
+        reserved		85
+        esdhc1_ipg		86
+        esdhc2_ipg		87
+        fec_ipg			88
+        reserved		89
+        reserved		90
+        reserved		91
+        gpt1_ipg		92
+        gpt2_ipg		93
+        gpt3_ipg		94
+        gpt4_ipg		95
+        reserved		96
+        reserved		97
+        reserved		98
+        iim_ipg			99
+        reserved		100
+        reserved		101
+        kpp_ipg			102
+        lcdc_ipg		103
+        reserved		104
+        pwm1_ipg		105
+        pwm2_ipg		106
+        pwm3_ipg		107
+        pwm4_ipg		108
+        rngb_ipg		109
+        reserved		110
+        scc_ipg			111
+        sdma_ipg		112
+        sim1_ipg		113
+        sim2_ipg		114
+        slcdc_ipg		115
+        spba_ipg		116
+        ssi1_ipg		117
+        ssi2_ipg		118
+        tsc_ipg			119
+        uart1_ipg		120
+        uart2_ipg		121
+        uart3_ipg		122
+        uart4_ipg		123
+        uart5_ipg		124
+        reserved		125
+        wdt_ipg			126
+        cko_div			127
+        cko_sel			128
+        cko			129
+
+properties:
+  compatible:
+    const: fsl,imx25-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx25-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
+
+    serial@43f90000 {
+        compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+        reg = <0x43f90000 0x4000>;
+        interrupts = <45>;
+        clocks = <&clks 79>, <&clks 50>;
+        clock-names = "ipg", "per";
+    };
-- 
2.7.4

[PATCH 8/9] dt-bindings: clock: Convert i.MX21 clock to json-schema

[Anson Huang]

Convert the i.MX21 clock binding to DT schema format using json-schema,
can NOT find any CCM interrupt info from reference manual and DT file,
so interrupts property is removed from original binding doc.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 .../devicetree/bindings/clock/imx21-clock.txt      | 27 ------------
 .../devicetree/bindings/clock/imx21-clock.yaml     | 49 ++++++++++++++++++++++
 2 files changed, 49 insertions(+), 27 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/imx21-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx21-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.txt b/Documentation/devicetree/bindings/clock/imx21-clock.txt
deleted file mode 100644
index 806f63d..0000000
--- a/Documentation/devicetree/bindings/clock/imx21-clock.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Clock bindings for Freescale i.MX21
-
-Required properties:
-- compatible  : Should be "fsl,imx21-ccm".
-- reg         : Address and length of the register set.
-- interrupts  : Should contain CCM interrupt.
-- #clock-cells: Should be <1>.
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
-for the full list of i.MX21 clock IDs.
-
-Examples:
-	clks: ccm@10027000{
-		compatible = "fsl,imx21-ccm";
-		reg = <0x10027000 0x800>;
-		#clock-cells = <1>;
-	};
-
-	uart1: serial@1000a000 {
-		compatible = "fsl,imx21-uart";
-		reg = <0x1000a000 0x1000>;
-		interrupts = <20>;
-		clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
-			 <&clks IMX21_CLK_PER1>;
-		clock-names = "ipg", "per";
-	};
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
new file mode 100644
index 0000000..cee9b00
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx21-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX21
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+  for the full list of i.MX21 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx21-ccm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx21-clock.h>
+
+    clock-controller@10027000 {
+        compatible = "fsl,imx21-ccm";
+        reg = <0x10027000 0x800>;
+        #clock-cells = <1>;
+    };
+
+    serial@1000a000 {
+        compatible = "fsl,imx21-uart";
+        reg = <0x1000a000 0x1000>;
+        interrupts = <20>;
+        clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
+                 <&clks IMX21_CLK_PER1>;
+        clock-names = "ipg", "per";
+    };
-- 
2.7.4

[PATCH 9/9] dt-bindings: clock: Convert i.MX1 clock to json-schema

[Anson Huang]

Convert the i.MX1 clock binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 .../devicetree/bindings/clock/imx1-clock.txt       | 26 ------------
 .../devicetree/bindings/clock/imx1-clock.yaml      | 49 ++++++++++++++++++++++
 2 files changed, 49 insertions(+), 26 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/imx1-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx1-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt
deleted file mode 100644
index 9823baf..0000000
--- a/Documentation/devicetree/bindings/clock/imx1-clock.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Clock bindings for Freescale i.MX1 CPUs
-
-Required properties:
-- compatible: Should be "fsl,imx1-ccm".
-- reg: Address and length of the register set.
-- #clock-cells: Should be <1>.
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
-for the full list of i.MX1 clock IDs.
-
-Examples:
-	clks: ccm@21b000 {
-		#clock-cells = <1>;
-		compatible = "fsl,imx1-ccm";
-		reg = <0x0021b000 0x1000>;
-	};
-
-	pwm: pwm@208000 {
-		#pwm-cells = <2>;
-		compatible = "fsl,imx1-pwm";
-		reg = <0x00208000 0x1000>;
-		interrupts = <34>;
-		clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
-		clock-names = "ipg", "per";
-	};
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
new file mode 100644
index 0000000..06a0ff9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx1-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX1 CPUs
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+  for the full list of i.MX1 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx1-ccm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx1-clock.h>
+
+    clock-controller@21b000 {
+        #clock-cells = <1>;
+        compatible = "fsl,imx1-ccm";
+        reg = <0x0021b000 0x1000>;
+    };
+
+    pwm@208000 {
+        #pwm-cells = <2>;
+        compatible = "fsl,imx1-pwm";
+        reg = <0x00208000 0x1000>;
+        interrupts = <34>;
+        clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+        clock-names = "ipg", "per";
+    };
-- 
2.7.4

Re: [PATCH 1/9] dt-bindings: clock: Convert i.MX5 clock to json-schema

[Rob Herring]

On Thu, 28 May 2020 15:27:51 +0800, Anson Huang wrote:
> Convert the i.MX5 clock binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
>  .../devicetree/bindings/clock/imx5-clock.txt       | 28 ----------
>  .../devicetree/bindings/clock/imx5-clock.yaml      | 63 ++++++++++++++++++++++
>  2 files changed, 63 insertions(+), 28 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/imx5-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/imx5-clock.yaml
> 

Applied, thanks!

Re: [PATCH 2/9] dt-bindings: clock: Convert i.MX35 clock to json-schema

[Rob Herring]

On Thu, 28 May 2020 15:27:52 +0800, Anson Huang wrote:
> Convert the i.MX35 clock binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
>  .../devicetree/bindings/clock/imx35-clock.txt      | 114 -----------------
>  .../devicetree/bindings/clock/imx35-clock.yaml     | 137 +++++++++++++++++++++
>  2 files changed, 137 insertions(+), 114 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.yaml
> 

Applied, thanks!

Re: [PATCH 3/9] dt-bindings: clock: Convert i.MX31 clock to json-schema

[Rob Herring]

On Thu, 28 May 2020 15:27:53 +0800, Anson Huang wrote:
> Convert the i.MX31 clock binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
>  .../devicetree/bindings/clock/imx31-clock.txt      |  90 ----------------
>  .../devicetree/bindings/clock/imx31-clock.yaml     | 118 +++++++++++++++++++++
>  2 files changed, 118 insertions(+), 90 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/imx31-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/imx31-clock.yaml
> 

Applied, thanks!

Re: [PATCH 4/9] dt-bindings: clock: Convert i.MX28 clock to json-schema

[Rob Herring]

On Thu, 28 May 2020 15:27:54 +0800, Anson Huang wrote:
> Convert the i.MX28 clock binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
>  .../devicetree/bindings/clock/imx28-clock.txt      |  93 -----------------
>  .../devicetree/bindings/clock/imx28-clock.yaml     | 113 +++++++++++++++++++++
>  2 files changed, 113 insertions(+), 93 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/imx28-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/imx28-clock.yaml
> 

Applied, thanks!

Re: [PATCH 5/9] dt-bindings: clock: Convert i.MX23 clock to json-schema

[Rob Herring]

On Thu, 28 May 2020 15:27:55 +0800, Anson Huang wrote:
> Convert the i.MX23 clock binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
>  .../devicetree/bindings/clock/imx23-clock.txt      | 70 -----------------
>  .../devicetree/bindings/clock/imx23-clock.yaml     | 90 ++++++++++++++++++++++
>  2 files changed, 90 insertions(+), 70 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/imx23-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/imx23-clock.yaml
> 

Applied, thanks!

Re: [PATCH 6/9] dt-bindings: clock: Convert i.MX27 clock to json-schema

[Rob Herring]

On Thu, 28 May 2020 15:27:56 +0800, Anson Huang wrote:
> Convert the i.MX27 clock binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
>  .../devicetree/bindings/clock/imx27-clock.txt      | 27 -----------
>  .../devicetree/bindings/clock/imx27-clock.yaml     | 53 ++++++++++++++++++++++
>  2 files changed, 53 insertions(+), 27 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/imx27-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/imx27-clock.yaml
> 

Applied, thanks!

Re: [PATCH 7/9] dt-bindings: clock: Convert i.MX25 clock to json-schema

[Rob Herring]

On Thu, 28 May 2020 15:27:57 +0800, Anson Huang wrote:
> Convert the i.MX25 clock binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
>  .../devicetree/bindings/clock/imx25-clock.txt      | 160 ------------------
>  .../devicetree/bindings/clock/imx25-clock.yaml     | 184 +++++++++++++++++++++
>  2 files changed, 184 insertions(+), 160 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/imx25-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/imx25-clock.yaml
> 

Applied, thanks!

Re: [PATCH 8/9] dt-bindings: clock: Convert i.MX21 clock to json-schema

[Rob Herring]

On Thu, 28 May 2020 15:27:58 +0800, Anson Huang wrote:
> Convert the i.MX21 clock binding to DT schema format using json-schema,
> can NOT find any CCM interrupt info from reference manual and DT file,
> so interrupts property is removed from original binding doc.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
>  .../devicetree/bindings/clock/imx21-clock.txt      | 27 ------------
>  .../devicetree/bindings/clock/imx21-clock.yaml     | 49 ++++++++++++++++++++++
>  2 files changed, 49 insertions(+), 27 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/imx21-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/imx21-clock.yaml
> 

Applied, thanks!

Re: [PATCH 9/9] dt-bindings: clock: Convert i.MX1 clock to json-schema

[Rob Herring]

On Thu, 28 May 2020 15:27:59 +0800, Anson Huang wrote:
> Convert the i.MX1 clock binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
>  .../devicetree/bindings/clock/imx1-clock.txt       | 26 ------------
>  .../devicetree/bindings/clock/imx1-clock.yaml      | 49 ++++++++++++++++++++++
>  2 files changed, 49 insertions(+), 26 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/imx1-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/imx1-clock.yaml
> 

Applied, thanks!